Search results for: 'Bar'

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-2211 (33058GNB2RM) SCHOLL DYEING MACHINE RAPIDSTAR MIDI CENTURY RMC 14 – 20408, CAPACITY 780 TO 800 KGS, YEAR 2002 DETAILS: BRAND: SCHOLL MODEL: RAPIDSTAR MIDI CENTURY RMC 14 – 20408 YEAR: 2002 CAPACITY: 780 TO 800 KGS WOVEN TERRY: 400 TO 1100 GR/LM WHIT NOZZLE: 150 WORKING TEMPERATURE: UP TO 140 C PRESSURE: UP TO 4.5 BAR BARCO SEDO SEDOMAT: 5000 4 ROPES / EIGHT NOZZLE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2210 (33046NMN2RM) SCHOLL DYEING MACHINE RAPIDSTAR MIDI CENTURY RMC 14 – 10208, CAPACITY 380 TO 400 KGS, YEAR 2002 DETAILS: BRAND: SCHOLL MODEL: RAPIDSTAR MIDI CENTURY RMC 14 – 10208 YEAR: 2002 CAPACITY: 380 TO 400 KGS WOVEN TERRY: 400 TO 1100 GR/LM WHIT NOZZLE: 150 WORKING TEMPERATURE: UP TO 140 C PRESSURE: UP TO 4.5 BAR BARCO SEDO SEDOMAT: 5000 2 ROPES / FOUR NOZZLE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-2127 BRAZZOLI HT ROPE DYEING MACHINES YEAR 2001 800 KILOGRAMS BRAZZOLI TYPE: HT ROPE DYEING MACHINES YEAR: 2001 140°C 4.55 BAR LOW LIQUOR RATIO (FROM 1/6 to 1/8) TYPE: SIRIO HT 800 4 TUBES 800 KILOGRAMS EACH MACHINE WITH: TURBOVARIO DEVICE (VARIABLE BATH PASSAGE CROSS SECTION THAT GUARANTEES HIGH PRODUCTION SPEEDS AT VERY LOW OPERATING PRESSURE) SEAM DETECTOR 2 DYE STUFF TANKS AUXILLARY CHHEMICAL PRODUCT TANK ANALOG DOSING SYSTEM MAGNETIC LEVEL CONTROL LITRE COUNTER HIGH THERMAL GRADIENT HEAT EXCHANGER MICROPROCESSOR FOR COMPLETE TREATMENT CYCLE CONTROL REMOVABLE FILTER MODULAR CONTROL BOARD MAXIMUM FABRIC SPEED 600 MTS/MIN EXTREME VESATILITY OF THIS MACHINE ALLOWS TO PROCESS ANY KIND OF FABRIC (BOTH WOVEN and KNITTED) FROM A WEIGHT OF 50 GRAMS/MT to 800 GRAMS/MT PROGRAMMER APC504 BY AREL NOZZLES 80 to 90mm QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: P-2126 MINOX PRT 3/C JET DYEING MACHINES YEAR 1988, 1990 and 1991 300 KILOGRAMS MINOX TYPE: PRT 3/C JET DYEING MACHINES YEAR: 1988, 1990 and 1991 148°c 3.5 BAR 3 ROPES 300KILOGRAMS TIME / TEMPERATURE PROGRAMMER WITH PNEUMATIC VALVES AUTOMATIC SEAM DETECTOR VALVES FOR DISCHARGE AND WASHING PRODUCTS INTRODUCTION TANK WITH ELECTROPUMP ELECTRIC PANEL QUANTITY AVAILABLE: 3 Learn More

INVENTORY NUMBER: E-4906 FRANZ MULLER TYPE PRN-32 TIGER BRUSHING MACHINE FOR BLANKETS FOR SALE: ROLLERS WIDTH 260 CM FABRIC SPEED INFINATLY VARIABLE BETWEEN 2.5 - 20 M/MIN., AJUSTABLE DISTANCE BETWEEN FABRIC AND BRUSHING CYLINDER AJUSTABLE ROTATION SPEED FOR BRUSHING CYLINDER AJUSTABLE FABRIC TENSION BETWEEN FRONT AND REAR SEAM DETECTOR WITH AUTOMATIC SEAM PASSAGE DEVICE BRUSHING CYLINDER SPEED 300 - 750 M/MIN. BACKSIDE BRUSH WITH ARC FOR ADJUSTING CLOTH ARC EXIT WITH PLAITER AIR PRESSURE FOR PNEUMATIC SYSTEM 7 BAR INDICATED SPECIALY FOR BRUSHING HIGH PILE FABRICS, AS BLANKETS, FALSE FURE, ETC. (PICTURES AVAILABLE) QUANTITY: 1 Learn More

REFERENCE NUMBER: C-2171 BRAZZOLI HT ROPE DYEING MACHINE, CAPACITY 800 KGS, YEAR 2001 DETAILS: BRAZZOLI 140°C HT ROPE DYEING MACHINE 4.5 BAR LOW LIQUOR RATIO (FROM 1/6 TO 1/8) TYPE SIRIO HT 800 4 TUBES CAPACITY: 800 KGS YEAR: 2001 TURBOVARIO DEVICE VARIABLE BATH PASSAGE CROSS SECTION THAT GUARANTEES HIGH PRODUCTION SPEEDS AT VERY LOW OPERATING PRESSURE SEAM DETECTOR 2 DYE STUFF TANKS AUXILIARY CHEMICAL PRODUCT TANK ANALOG DOSING SYSTEM MAGNETIC LEVEL CONTROL LITRE COUNTER HIGH THERMAL GRADIENT HEAT EXCHANGER MICROPROCESSOR FOR COMPLETE TREATMENT CYCLE CONTROL REMOVABLE FILTER MODULAR CONTROL BOARD MAXIMUM FABRIC SPEED 600 MTS/MIN EXTREME VERSATILITY OF THIS MACHINE ALLOWS TO PROCESS ANY KIND OF FABRIC BOTH WOVEN AND KNITTED FROM A WEIGHT OF 50 GRMS/MT TO 800 GRMS/MT PROGRAMMER APC504 BY AREL NOZZLES: 80 TO 90mm QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: P-1851 BRAZZOLI SIRIO HT 400 HIGH TEMPERATURE LONG TUBE JET YEAR 2002 BRAZZOLI TYPE: SIRIO HT 400 HIGH TEMPERATURE LONG TUBE JET YEAR: 2002 2 TUBES EACH (TOTALLY IN 2 MACHINES 4 TUBES: 2 TUBE + 2 TUBE CAN WORK INDIVIDUALLY OR SIMULTANEOUSLY) EACH TUBE CAPACITY: 200 KILOGRAMS WORKING TEMPERATURE: 151 FEET C WORKING PRESSURE: 4 BARS COMPLETE WITH MIXING TANK WITH AGITATOR AND STOCK TANK INVERTER AND PLC CONTROL QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: P-1852 BRAZZOLI SIRIO HT 400 HIGH TEMPERATURE LONG TUBE JET YEAR 2001 BRAZZOLI TYPE: SIRIO HT 400 HIGH TEMPERATURE LONG TUBE JET YEAR: 2001 2 TUBES EACH TUBE CAPACITY: 200 KILOGRAMS WORKING TEMPERATURE: 151 FEET C WORKING PRESSURE: 4 BARS COMPLETE WITH MIXING TANK WITH AGITATOR AND STOCK TANK INVERTER AND PLC CONTROL QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: V-0046 AUTOMATIC ROLL SHRINK PACKING MACHINE MODEL ARPM-240I QUANTITY AVAILABLE: 1 Learn More