Search results for: 'speed'

REFERENCE NUMBER:P-8699

TWO HEADS WEIGHING PACKING MACHINE

 

POWER SUPPLY: 220V 50/60Hz 500W

WEIGHTING RANGE: 50 TO 2000G

ACCURACY ≤±1g

HOPPER VOLUME: 60L

PACKING SPEED: 10 TO 20 BAG/MIN

MACHINE SIZE: 630X530X1660mm

MACHINE WEIGHT: 150KG

CAPACITY: 3 TO 4M³/H (CAN BE ADJUSTED)

VOLUME OF HOPPER: 0.15 M³

LIFTING HEIGHT: 1.9M (OR AS YOUR CUSTOMIZE)

VOLTAGE: AC 380V/500W

 

QUANTITY: 1

Learn More

P-4653 NEW FRINGING MACHINE WIDTH 2000mm

MOTORIZED: CA
INSTALLED POWER: 4 KILOWATTS
AIR PRESSURE: MINIMUM 7 BARS
FABRIC SPEED: mt 40/45 1 FEET
WORKING WIDTH: 2000mm
DOFFER PITCH: 7 to 14 OR DIFFERENT ON REQUEST
FOOTBOARD ON THE ENTRY SIDE
DEVICE FOR THE AUTOMATIC THREADING OF THE NEEDLE
AUTOMATIC DEVICE FOR THE TENSIONING OF THE WARP THREADS ON THE REED IN ORDER TO HAVE ALWAYS A PERFECT TENSIONING OF THE FABRICS AND A PERFECT THREADING
DEVICE FOR THE AUTOMATIC LIFTING OF THE UPPER REED GROUP AT THE END OF THE CYCLE
DEVICE FOR THE AUTOMATIC CENTERING OF THE NEEDLE-GUIDE ON THE AUTOMATIC REED
DIMENSIONS: LENGTH 4550mm x WIDE 3300mm x HEIGHT 2670mm
MACHINE EQUIPPED WITH PHOTCELLS AND SAFETY DEVICES CERTIFIED “CE”

QUANTITY: 1

Learn More

P-4143 STORK PEGASUS EVO IF-A/1850 ROTARY PRINTING MACHINE YEAR 2012 WIDTH 1850mm 8 COLORS

STORK
MODEL: EVO IF-A/1850
ROTARY PRINTING MACHINE
YEAR: 2012
MACHINE WIDTH: 2600mm
DRYER WIDTH: 4200mm
TOTAL LENGTH OF MACHINES: 8.6 + 10.4 METERS
FABRIC WIDTH: 1850mm
COLORS: 8
CHAMBERS OF THE DRYER: 6 FANS
4 NATURAL GAS HEATING BURNERS
MECHANICAL SPEED: 80m/min
MOTORS DRIVEN BY AC AND SERVO MOTORS
QUANTITY OF PUMPS
WITH BRUSHERS
220V/60HZ
DRYER MODEL: TRSG-1
YEAR: 2012
FABRIC/WOVEN OPENERS 2040
MAKE: E+L SWS 9681

QUANTITY: 1

Learn More

L-1194 KUSTERS PAD BATCH 1800mm YEAR 2004

YEAR: 2004
WORKING WIDTH: 1800mm
0.65 kg/mt FABRIC
35m/min SPEED
DYEING IS 100% REACTIVE

QUANTITY: 1

Learn More

P-3527 KMT CONTICRASH CRUSHING MACHINE YEAR 2003 WIDTH 3500mm

KMT
MODEL: CONTICRASH
CRUSHING MACHINE
YEAR: 2003
MACHINE TO CRUSH FABRICS IN CONTINUOUS WITH WORKING WIDTH UP TO 3500mm, PARTICULARLY SUITABLE FOR WOVEN FABRICS.
IT IS SUPPLIED WITH UNWINDER AT TOWING CYLINDERS WITH VARIABLE SPEED, THERMOFIXING STEAM CHAMBER AND FABRIC EXTRACTION BELT WITH SEVERAL COOLING FANS.

QUANTITY: 1

Learn More

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

P-4874 BRUCKNER OPTI-SHRINK COMREHENSSIVE SHRINKING RANGE (SANFORIZER) YEAR 2003 WIDTH 2000mm

BRUCKNER
TYPE: OPTI-SHRINK
COMPREHENSSIVE SHRINKING RANGE (SANFORIZER)
YEAR: 2003
WORKING WIDTH: 2000mm

QUANTITY: 1

Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-3851

MONFORTS STENTER FOR KNITS

MODEL: MONTEX 6500 7F TWINAIR

7 CHAMBERS GAS HEATED

WORKING WIDTH: 2200mm

YEAR: 2012

 QUANTITY: 1

Learn More

REFERENCE NUMBER: C-2257 SUCKER MÜLLER AND KARL MAYER ROTAL SIZING MACHINE COMPRISING OF WARP BEAM UNWINDING CREEL, YEAR: 1985 MODIFIED 2010 DETAILS: MAKER: SUCKER MÜLLER AND KARL MAYER ROTAL YEAR: 1985 YEAR MODIFIED: 2010 QUANTITY AVAILABLE: 1 Learn More