Search results for: 'cont'''''

K-9635 MONFORTS THERMEX THERMOSOL DYEING WIDTH 2000mm YEAR 1996

BRAND: MONFORTS
THERMOSOL DYEING
THERMEX
YEAR: 1996
JBOX WITH ERHARDT + LEIMER EDGE CONTROL
2 COOLING DRUMS
KUSTERS S TYPE DYE PAD
UV DRYERS
THERMOFIXER
EXIT BATCH
KUSTERS DYEING PAD WIDTH 2000mm (FACE CYLINDER WIDTH)
WORKING WIDTH 2000mm
6 UNITS CHEMICAL + DYE FEEDING TANKS ACOUPLED
STOPPED FOR 4 YEARS

QUANTITY: 1

J-0098 TUBETEX KNITGOODS DRYER 3200mm YEAR 2003

MODEL ULTRA 3-ACTIVE PASS
WIDTH 3200mm
YEAR 2003
5 SECTION
PLEVA EXHAUST SYSTEM
FABRIC TEMPERATURE CONTROL
AUTOMATIC LINT CLEANING AND COLLECTION

QUANTITY: 1

A-2076 MONFORTS SANFORIZING LINE FOR KNITTING FABRICS, YEAR 1989, WIDTH 2200MM

MODEL: TOPTEX/W
YEAR: 1989
ROLLERS WIDTH: 2400 MM
WORKING WIDTH 2200 MM
RUBBER CONVEYOR BELT WIDTH: 2300 MM
RUBBER CONVEYOR BELT REPLACED IN 2014
RUBBER THICKNESS: 66 MM
FABRIC ENTRY FRAME WITH ADJUSTABLE FABRIC BRAKE DEVICE

ROLLING MACHINE
MAKE: TESTA
WITH INSPECTION TABLE FOR QUALITY CONTROL OF FABRICS

QUANTITY: 1

A-2074 BABCOCK STENTER, YEAR 1998, WIDTH 1800MM, 8 CHAMBERS, GAS HEATED

YEAR: 1998
8 CHAMBERS
WORKING WIDTH: 1800 mm
GAS HEATED
ECON AIR
ENTRENCE FROM BIG GATCH OR FROM CARRIER
PLEVA HUMIDITY CONTROLLER
HORIZONTAL CHAIN
WORKING CONDITION

QUANTITY: 1

A-2057 ZELTEX COLORSTAR SAMPLE DYEING MACHINE, 220 VOLT, 50 HZ

TYPE: COLORSTAR CS1
WITH SEDO PC 1000 CONTROL
1 X 220 VOLT / 50 Hz
100 WATT

QUANTITY: 2

R-1429 MONFORTS SANFORISER, WIDTH 2400mm

MONFORTS SANFORISER
MAX FABRIC WIDTH: 2400mm
THIS SANFORISER IS EXCEPTIONALLY WELL EQUIPPED
WITH A MAHLO WEFT STRAIGHTENER
AND A 10MT LONG CLIP TENTER
THE RUBBER BELT
WHICH IS IN ALMOST AS NEW CONDITION IS 2460mm WIDE
AND THE PALMER CYLINDER IS 2400mm DIAM.
MAKING IT SUITABLE FOR PROCESSING A WIDE RANGE OF FABRICS FROM LIGHTER WEIGHT APPAREL FABRICS TO DENIM
TWILLS AND BED SHEETINGS
HIGH ENTRANCE FRAME WITH ONE PAIR KF10 GUIDERS ON A SCREWED WIDTH ADJUSTMENT SHAFT
COMPENSATOR AND TENSION CONTROL RAILS
DRIVEN DRAW ROLLER
COMPENSATOR
MAHLO BOW AND SKEW WEFT STRAIGHTENER, 4 HEADS
CLIP TENTER, 10M WITH STEAMING FIELD
RUBBER BELT SHRINKING MACHINE
RUBBER BELT WIDTH 2460mm
PALMER CALENDER WITH 240CM DIAMETER CYLINDER
ENDLESS FELT BLANKET 2470mm WIDE
BLANKET DRYING CYLINDER
COOLING CYLINDER, WATER COOLED
DRAW ROLLERS
SCRAY FOR NON-STOP BATCHING
EXIT FRAME WITH DRAW ROLLER
SURFACE DRIVEN A-FRAME BATCHER AND PLAITER

QUANTITY: 1

P-4891 MONFORTS SANFORIZER YEAR 1990 to 1991 WIDTH 1800mm

MONFORTS
SANFORIZER
YEAR: 1990 to 1991
WORKING WIDTH: 1800mm
ROLLER WIDTH: 2000mm
HIGH ENTRY FEEDING UNIT TYPE E+A COMBI
E/L SELVEDGE UNCURLERS KF2020
GUIDE ROLLER STAINLESS STEEL
WEKO HUMIDIFICATION DEVICE BY ROTATING SPRAY DISC
STEAMING CYLINDER, DIAMETER 800mm
TENTER
LENGTH 1500mm
CLIP CHAIN
WIDTH CONTROL
SEMIAUTOMATIC CALANDER ROLLER
RUBBER
ROLLER WIDTH 1650mm
INCLUDING NEW RUBBER BLANKET
1780mm WIDTH
FELT CALANDER WITH DRYING CYLINDER 1500/800mm
ROLLER WIDTH 1900mm (FELT BLANKET 1740mm)
COOLING CYLINDER
DELIVERY TO BIG BATCHER OR PLAITER
SHRINKAGE CONTROL

QUANTITY: 1

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

L-1154  INTES DYEING JIGGER WIDTH 3400 X 1500mm

ROLLER WIDTH: 3400mm
MAX. LOAD 1500mm (DEPENDS ON FABRIC WEIGHT)
CONTROL SYSTEM: HWS 021

QUANTITY: 2

R-1708 MCS JET DYEING MACHINE, CAPACITY 720 TO 800 KGS, YEAR 2001

MCS JET DYEING MACHINE
YEAR: 2001
TYPE: MFJ KHT
4 TUBE HT 140C
CAPACITY: 720 TO 800 KGS
TERMOELETTRONICA PLC PROGRAMMABLE CONTROLLER
TYPE: CT-301

QUANTITY: 1