Search results for: 'dye+machine'

REFERENCE NUMBER: M-5224 (1313LBGWXX12) L LORIS BELLINI YARN DYEING MACHINES YEAR 1990-1998 YARN DYEING LORIS BELLINI (1) X 70KG, YEAR 1990 (2) X 150KG, YEAR 1990 (1) X 20KG, YEAR 1990 QUANTITY AVAILABLE: 4 Learn More

REFERENCE NUMBER: M-3198 (7704HFFP6) L LORIS BELLINI ABP AUTOMATIC SPRAY HANK DYEING MACHINE YEAR 2003 BRAND: LORIS BELLINI MODEL: ABP AUTOMATIC SPRAY HANK DYEING MACHIINE 75KG MAXIMUM CAPACITY RUNNING NOW LIKE BRAND NEW QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-2171 BRAZZOLI HT ROPE DYEING MACHINE, CAPACITY 800 KGS, YEAR 2001 DETAILS: BRAZZOLI 140°C HT ROPE DYEING MACHINE 4.5 BAR LOW LIQUOR RATIO (FROM 1/6 TO 1/8) TYPE SIRIO HT 800 4 TUBES CAPACITY: 800 KGS YEAR: 2001 TURBOVARIO DEVICE VARIABLE BATH PASSAGE CROSS SECTION THAT GUARANTEES HIGH PRODUCTION SPEEDS AT VERY LOW OPERATING PRESSURE SEAM DETECTOR 2 DYE STUFF TANKS AUXILIARY CHEMICAL PRODUCT TANK ANALOG DOSING SYSTEM MAGNETIC LEVEL CONTROL LITRE COUNTER HIGH THERMAL GRADIENT HEAT EXCHANGER MICROPROCESSOR FOR COMPLETE TREATMENT CYCLE CONTROL REMOVABLE FILTER MODULAR CONTROL BOARD MAXIMUM FABRIC SPEED 600 MTS/MIN EXTREME VERSATILITY OF THIS MACHINE ALLOWS TO PROCESS ANY KIND OF FABRIC BOTH WOVEN AND KNITTED FROM A WEIGHT OF 50 GRMS/MT TO 800 GRMS/MT PROGRAMMER APC504 BY AREL NOZZLES: 80 TO 90mm QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: P-1813 BRAZZOLI H.T. SATURNO LUFT HTF DYEING MACHINE YEAR 2002 400KG BRAZZOLI MODEL: H.T. DYEING MACHINE TYPE: SATURNO LUFT HTF FOR TERRY TOWEL FABRICS YEAR: 2002 CAPACITY: 400 KILOGRAMS EACH MACHINE TEHSE MACHINES CAN ALSO BE OPERATED COUPLED TO DYE ONE LOT OF 800 KILOGRAMS SUPPLIED WITH MAIN MOTOR AND PUMP AUTOMATIC VALVES FOR STEAM AND WATER FUNCTIONS ADD TANK + DOSING PUMP ELECTRICAL PANEL WITH MICROPROCESSOR CONTROLS TEST RUN POSSIBLE, SINCE THE UNITS ARE STILL FULLY CONNECTED TO THE ELECTRICITY, STEAM, WATER, ETC QUANTITY AVAILABLE: 2 Learn More

TT-3261 THIES TRD HT DYEING MACHINE, 3 PIPES, YEAR 1997 QUANTITY: 1 Learn More

R-1734 THIES HIGH TEMPERATURE SOFTFLOW DYEING MACHINE, CAPACITY 300 KGS, YEAR 2003

BRAND: THIES
TYPE: SOFT TRD 140/2
THE MACHINE IS STILL IN WORKING CONDITION
TITLE: THIES SOFT TRD 140/2
MODEL: SOFT TRD 140/2
CAPACITY (KG): 300 KGS
YEAR: 2003
2 CHAMBERS EACH CAPACITY 150 KG = 300 KGS
MACHINE EQUIPPED WITH VARIOFLUTER NOZZLES
WITH VARIABLE DIAMETER
SETEX DYE CYCLE CONTROLLER TYPE T 737XL
WITH FILTER
ADDITION VAT AND MIXER
WATER CAPACITY: 3800 LITERS

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4495 (1111TSDGXX10) D LAIP AIRFLOW DYEING MACHINES 2011 – 100 KG EACH MACHINE MAKE: LAIP YEAR: 2011 MODEL: FLOW-98 GRADI TYPE: SBRUFF 1 CORDA SINGLE ROPE INVERTER DRIVE CONTROL TYPE: SEDOMAT-1800 380V, 50HZ 100 KG EACH MACHINE QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: P-2127 BRAZZOLI HT ROPE DYEING MACHINES YEAR 2001 800 KILOGRAMS BRAZZOLI TYPE: HT ROPE DYEING MACHINES YEAR: 2001 140°C 4.55 BAR LOW LIQUOR RATIO (FROM 1/6 to 1/8) TYPE: SIRIO HT 800 4 TUBES 800 KILOGRAMS EACH MACHINE WITH: TURBOVARIO DEVICE (VARIABLE BATH PASSAGE CROSS SECTION THAT GUARANTEES HIGH PRODUCTION SPEEDS AT VERY LOW OPERATING PRESSURE) SEAM DETECTOR 2 DYE STUFF TANKS AUXILLARY CHHEMICAL PRODUCT TANK ANALOG DOSING SYSTEM MAGNETIC LEVEL CONTROL LITRE COUNTER HIGH THERMAL GRADIENT HEAT EXCHANGER MICROPROCESSOR FOR COMPLETE TREATMENT CYCLE CONTROL REMOVABLE FILTER MODULAR CONTROL BOARD MAXIMUM FABRIC SPEED 600 MTS/MIN EXTREME VESATILITY OF THIS MACHINE ALLOWS TO PROCESS ANY KIND OF FABRIC (BOTH WOVEN and KNITTED) FROM A WEIGHT OF 50 GRAMS/MT to 800 GRAMS/MT PROGRAMMER APC504 BY AREL NOZZLES 80 to 90mm QUANTITY AVAILABLE: 2 Learn More

TT-3489 THIES DYEING MACHINES FOR KNIT FABRICS, YEAR 1998 TO 2003 QUANTITY: 1 Learn More