Search results for: 'f&k''''

R-1429 MONFORTS SANFORISER, WIDTH 2400mm

MONFORTS SANFORISER
MAX FABRIC WIDTH: 2400mm
THIS SANFORISER IS EXCEPTIONALLY WELL EQUIPPED
WITH A MAHLO WEFT STRAIGHTENER
AND A 10MT LONG CLIP TENTER
THE RUBBER BELT
WHICH IS IN ALMOST AS NEW CONDITION IS 2460mm WIDE
AND THE PALMER CYLINDER IS 2400mm DIAM.
MAKING IT SUITABLE FOR PROCESSING A WIDE RANGE OF FABRICS FROM LIGHTER WEIGHT APPAREL FABRICS TO DENIM
TWILLS AND BED SHEETINGS
HIGH ENTRANCE FRAME WITH ONE PAIR KF10 GUIDERS ON A SCREWED WIDTH ADJUSTMENT SHAFT
COMPENSATOR AND TENSION CONTROL RAILS
DRIVEN DRAW ROLLER
COMPENSATOR
MAHLO BOW AND SKEW WEFT STRAIGHTENER, 4 HEADS
CLIP TENTER, 10M WITH STEAMING FIELD
RUBBER BELT SHRINKING MACHINE
RUBBER BELT WIDTH 2460mm
PALMER CALENDER WITH 240CM DIAMETER CYLINDER
ENDLESS FELT BLANKET 2470mm WIDE
BLANKET DRYING CYLINDER
COOLING CYLINDER, WATER COOLED
DRAW ROLLERS
SCRAY FOR NON-STOP BATCHING
EXIT FRAME WITH DRAW ROLLER
SURFACE DRIVEN A-FRAME BATCHER AND PLAITER

QUANTITY: 1

P-4891 MONFORTS SANFORIZER YEAR 1990 to 1991 WIDTH 1800mm

MONFORTS
SANFORIZER
YEAR: 1990 to 1991
WORKING WIDTH: 1800mm
ROLLER WIDTH: 2000mm
HIGH ENTRY FEEDING UNIT TYPE E+A COMBI
E/L SELVEDGE UNCURLERS KF2020
GUIDE ROLLER STAINLESS STEEL
WEKO HUMIDIFICATION DEVICE BY ROTATING SPRAY DISC
STEAMING CYLINDER, DIAMETER 800mm
TENTER
LENGTH 1500mm
CLIP CHAIN
WIDTH CONTROL
SEMIAUTOMATIC CALANDER ROLLER
RUBBER
ROLLER WIDTH 1650mm
INCLUDING NEW RUBBER BLANKET
1780mm WIDTH
FELT CALANDER WITH DRYING CYLINDER 1500/800mm
ROLLER WIDTH 1900mm (FELT BLANKET 1740mm)
COOLING CYLINDER
DELIVERY TO BIG BATCHER OR PLAITER
SHRINKAGE CONTROL

QUANTITY: 1

P-4140 OSTHOFF ST80 GAS SINGEING MACHINE YEAR 1990 WIDTH 1800mm

OSTHOFF
TYPE: ST80
GAS SINGEING MACHINE
YEAR: 1990
WORKING WIDTH: 1800mm
ROLLER WIDTH: 1800mm
CONSISTING OF:
BEATING AND BRUSHING UNIT WITH FILTER FEED KF10
SINGEING UNIT WITH 2 BURNERS
BEATING AND BRUSHING UNIT
TYPE: V899
YEAR: 2001
DESIZING THROUGH WITH 5m CAPACITY
SQUEEZER MENZEL
BIG BATCHER
THE MACHINE WAS COMPLETELY OVERHAULED IN 2001 AND AT THE SAME TIME IT WAS EQUIPPED WITH A THREE-PHASE MOTOR

QUANTITY: 1

A-1970 MCS 4 PORT MULTIFLOW, CAPACITY 800 KG, YEAR 2005

MCS MULTIFLOW
4 PORT (SINGLE ROPE)
CAPACITY 800 KG
KNITTED FABRICS
YEAR: 2005

QUANTITY: 

S-1167 SEALING AND SHRINKING MACHINE, WIDTH 850mm

SEALING AND SHRINKING MACHINE
SHRINKING CANS, BEERS, PURE WATER ETC
SHRUNK BY PE FILM, PVC, POF ETC.
CONVEYING BELT CAN BE MADE OF ROLLERS
OR TEFLON MESH BELT
OR S/S MESH BELT
STAINLESS STEEL HEATER
LARGE POWER FAN SYSTEM
AND SUPER COOLING SYSTEM TO ENSURE
THE EXCELLENT SHRINKING
ITEM 001
MAX PACKING SIZE (MM): L500 X W300 X H350
MIN PACKING SIZE (MM): 280 X 100 X 100
PACKING SPEED: 6 TO 10PCS/MINUTE
VOLTAGE: 220V/50HZ
RATED POWER: 1.8KW
SEALING TIME/SHRINK TIME/TEMPERATURE: 0.5-1.5S/0-0.6S/0 -250 °C
WIDTH/THICKNESS OF THE FILM: 600mm/0.04 -0.12mm
DIMENSION: L1030 X W850 X H970mm
GROSS WEIGHT: 350 KGS
AIR PRESSURE OF WORKING: 4 TO 8MPA
SHRINK FILM: PE POF PVC

QUANTITY: 1

ITEM 002
MAX PACKING SIZE (MM): W600*H400*L
PACKING SPEED: 15M/MIN
VOLTAGE: 380V/50HZ
RATED POWER: 20KW
DIMENSION: L3200 × W850 × H1580mm
GROSS WEIGHT: 380 KGS
SHRINK FILM: PE POF PVC

QUANTITY: 1

P-3527 KMT CONTICRASH CRUSHING MACHINE YEAR 2003 WIDTH 3500mm

KMT
MODEL: CONTICRASH
CRUSHING MACHINE
YEAR: 2003
MACHINE TO CRUSH FABRICS IN CONTINUOUS WITH WORKING WIDTH UP TO 3500mm, PARTICULARLY SUITABLE FOR WOVEN FABRICS.
IT IS SUPPLIED WITH UNWINDER AT TOWING CYLINDERS WITH VARIABLE SPEED, THERMOFIXING STEAM CHAMBER AND FABRIC EXTRACTION BELT WITH SEVERAL COOLING FANS.

QUANTITY: 1

P-3526 KMT COMBI 635 TRANSFER PRINTING CALENDER YEAR 2002 WIDTH 3400mm

KMT
MODEL: COMBI 635
TRANSFER PRINTING CALENDER
YEAR: 2002
WIDTH: 3400mm
HEAT ELECTRIC
EXIT: FOLDER A-FRAME TANGENTIAL WINDER
DIAMETER 600mm

QUANTITY: 1

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

C-4252 OSTHOFF-SENGE SINGEING MACHINE, WORKING WIDTH 1800mm, YEAR 1992

SINGEING MACHINE
BRAND: OSTHOFF-SENGE GMBH UND CO. KG
YEAR: 1992
WORKING WIDTH: 1800mm
1 X TWO SIDED SINGEING UNIT
TYPE: PK86
2 X BRUSHING UNITS
TYPE: VP87/1
ENTRY FROM BATCHER
EXIT TO BATCHER
STATUS: STOPPED ON MILL FLOOR

QUANTITY: 1

P-4874 BRUCKNER OPTI-SHRINK COMREHENSSIVE SHRINKING RANGE (SANFORIZER) YEAR 2003 WIDTH 2000mm

BRUCKNER
TYPE: OPTI-SHRINK
COMPREHENSSIVE SHRINKING RANGE (SANFORIZER)
YEAR: 2003
WORKING WIDTH: 2000mm

QUANTITY: 1