Search results for: 'automatic+f'

P-4653 NEW FRINGING MACHINE WIDTH 2000mm

MOTORIZED: CA
INSTALLED POWER: 4 KILOWATTS
AIR PRESSURE: MINIMUM 7 BARS
FABRIC SPEED: mt 40/45 1 FEET
WORKING WIDTH: 2000mm
DOFFER PITCH: 7 to 14 OR DIFFERENT ON REQUEST
FOOTBOARD ON THE ENTRY SIDE
DEVICE FOR THE AUTOMATIC THREADING OF THE NEEDLE
AUTOMATIC DEVICE FOR THE TENSIONING OF THE WARP THREADS ON THE REED IN ORDER TO HAVE ALWAYS A PERFECT TENSIONING OF THE FABRICS AND A PERFECT THREADING
DEVICE FOR THE AUTOMATIC LIFTING OF THE UPPER REED GROUP AT THE END OF THE CYCLE
DEVICE FOR THE AUTOMATIC CENTERING OF THE NEEDLE-GUIDE ON THE AUTOMATIC REED
DIMENSIONS: LENGTH 4550mm x WIDE 3300mm x HEIGHT 2670mm
MACHINE EQUIPPED WITH PHOTCELLS AND SAFETY DEVICES CERTIFIED “CE”

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-4610 ROLL CUTTER EQUIPPED WITH: MOVEABLE CUTTING ASSEMBLY IN-CEILING WITH DOUBLE FLWHEEL FOR ADJUSTING AND LOCKING. ADJUSTING SWING THE MEASURE TO MAKE CUTS ACCURATE AND UNIFORM. LOCKING LEVER TISSUE WHICH GREATLY FACILITATES THE CUTTING OF REELS OF SMALL SIZE. SECURITY COMMAND FOR ROTATING ROLLERS MOUNTED DIRECTLY ON THE BLADE LEVER. CUT ROLLS UP TO A LENGTH OF 3.50 METERS. DISK DIAMETER 500mm HIGH RESISTANCE. AUTOMATIC COOLING OF THE BLADE. DOUBLE SHARPENING PNEUMATIC HIGH SPEED WITH CONE WHEEL ACTING ON BOTH SIDES OF OBTAINING A SHARP BLAST. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4327

BENNINGER ZELL SIZING MACHINE MODEL BEN-SIZETEC WORKING WIDTH 2200mm YEAR 1994

 

BENNINGER ZELL SIZING MACHINE  MODEL BEN - SIZETEC WORKING WIDTH 2200 mm

YEAR  1994, WITH SECTIONAL AND FRACTIONAL SYSTEM.

N° A13715

MODEL  BB-S/ZT4/4/TKD

1 SECTIONAL BEAM UNROLLING DEVICE MODEL SWA WITH LOADING CELL FOR MEASURING

THE OUT GOING TENSION .

ELECTRO PNEUMATIC BREAKING SYSTEM

MAXIMUM BEAM DIAMETER 1000 mm.

1 FRACTIONAL BEAMING UNROLLING DEVICE WITH CAPACITY UP TO 20 POSITIONS

ELECTRO PNEUMATIC BREAKING SYSTEM

1 SIZING BOX MODEL TDK WORKING WIDTH 2200 mm. TOTAL WIDTH 2400 mm

STAINLESS STEEL BOX WITH TOTAL CAPACITY OF 240 LITERS WITH DIRECT STEAM INJECTION

LOWER VESSELS WITH INDIRECT HEAT SYSTEM

AUTOMATIC SIZE BOX FEEDING

HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DRYING SECTION DEVICE MODEL ZT8 – WORKING WIDTH 2200 mm

6 DRYING STAINLESS STEEL CYLINDERS COVERED WITH TEFLON + 2 CYLINDERS WITHOUT TEFLON

4 ELECTRONIC TEMPERATURE REGULATIONS

2 AIR EXTRACTION

1 OIL/GREASE APPLICATION DEVICE MODEL CV

1 YARN SPLITTING DEVICE

7 RODS FOR SECTIONAL BEAMS

19 RODS FOR FRACTIONAL BEAMS

1 HUMIDITY MAHLO CONTROL DEVICE MODEL RMS-7S N°1670/1/10597

1 BEAM ROLLING DEVICE MODEL BB FOR BEAMS UP TO 1000 mm DIAMETER

YARN TRACTION MADE UP OF 3 ROLLS

1 PRESSURIZED ROLLER DEVICE

TENSION AND PRESSURE MEASURE DEVICES

AUTOMATIC BEAM LIFT DEVICE INCLUSIVE OF ADAPTORS FOR DIFFERENT BEAMS

EXTENSION REED FOR ENDS WIDTH CONTROL

MIRROR FOR EASY YARN CONTROL

1 HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DUST SUCTION DEVICE

1 COMPLETE SIZE KITCHEN PREPARATION INCLUDING 2 TANKS FOR SIZE STORAGE

1 FULLY AUTOMATIC BENSIZETEC PROCESS CONTROL DEVICE INCLUDING HARDWARE AND SOFTWARE

1 EXTERNAL ELECTRIC CABINET.

Learn More

REFERENCE NUMBER: M-5136 (1212PZWKHH11) L COMPLETE PACKAGE DYE HOUSE 3 PRESSURE DRYERS 13 HIGH TEMPERATURE CONE DYEING MACHINES 3 LABORATORY HIGH TEMPERATURE DYEING MACHINES 2 LABORATORY HIGH TEMPERATURE DYEING MACHINES 1 COLOUR TESTER 1 LABORATORY DYEING MACHINE 1 LABORATORY HIGH TEMPERATURE CONE DYEING MACHINE 1 CONE CENTRIFUGE 1 WASHING TESTER 2 DRYING OVENS 2 COLOUR TESTER 1 CROCKTESTER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4305 (101018CYA9RX) J INSPECTION/ROLLING MACHINE "TESTA" EUREKA YEAR 1992 -2200mm MAİN OPERATİONS OF THE MACHİNE: • CHECK THE FABRİC • CUT THE FABRİC • FABRİC TAKİNG UP İN ROLL • PACKİNG THE FABRİC • AUTOMATİC WEİGHİNG AND LABELLİNG TECHNİCAL CHARACTERİSTİCS: • FULLY AUTOMATİC MACHİNE • WİNDİNG: MİNİMUM DİAMETER 100MM. • WİNDİNG: MAXİMUM DİAMETER 500MM. • MİNİMUM WORKİNG FABRİC 800MM. • MAXİMUM WORKİNG FABRİC 2.200MM. • ROLLS: MAXİMUM WEİGHT KG.100 • MAXİMUM POWER İNSTALLED 27 KW • COMPRESSED AİR PRESSURE 6/7 BAR • ADJUSTABLE TENSİON FABRİC • HARDNESS OF ROLL ADJİUSTABLE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: V-0046 AUTOMATIC ROLL SHRINK PACKING MACHINE MODEL ARPM-240I QUANTITY AVAILABLE: 1 Learn More

TT-6339 COMPLETE PLANT FOR MODERN DENIM DYEING & FINISHING, YEAR 2004 Learn More

REFERENCE NUMBER: L-5934

MONFORTS 6-F TWIN AIR STENTER YEAR 2003 – WORKING WIDTH 2400mm

 

STENTER

RAMA MONFORTS

MAKE: MONFORTS

MODEL: 6-F TWIN

YEAR: 2003

440 VAC 60HZ

NATURAL GAS

AIR COMPRESSOR 7 BAR

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-2256 TRUTZSCHLER DK760 40” CANS, YEAR 1995, WITH AUTOMATIC CAN CHANGER DETAILS: MODEL: DK760 YEAR: 1995 CARD COMMANDER CONTROLS 40" CANS WITH AUTOMATIC CAN CHANGER KH850/900 AUTOLEVELER FBK533 CHUTE FEED 460 VOLT/60HZ CURRENTLY INSTALLED AND RUNNING IN FACTORY QUANTITY AVAILABLE: 35 Learn More

REFERENCE NUMBER: C-2298 BRUCKNER STENTER LINE, WIDTH 3600mm, YEAR 2000, 8 CHAMBERS, PIN CHAIN DETAILS: BRUCKNER STENTER LINE YEAR: 2000 WIDTH: 3600mm BIANCO ENTRY MODEL: LINEA ENTRATA RAM TRACTION UNIT WITH COMPENSATOR J-BOX ACCUMULATOR WITH TRACTION ROLLER DOGAL CENTERING UNIT WITH MOTORIZED SPANDERS ROLLERS FOULARD 2 ROLLERS WITH PNEUMATIC PRESSURE VDTEX WEFTSTRAIGHTENER WITH 8 HEADS E+L DIGITAL INTRODUCTION AUTOMATIC OVERFEED 6 METERS ENTRY HORIZONTAL PIN CHAIN 8 CHAMBERS GAS HEATED WITH BRÜCKNER ECLIPSE BURNERS AUTOMATIC REGULATION OF CHAIN WIDTH COOLING UNIT MAHLO HUMIDITY CONTROL EXIT BY BIANCO YEAR: 2000 MODEL: LINEA USCITA RAM ACCUMULATOR UNIT 60 METERS BIG BATCHER FOR A-FRAME WITH DOUBLE POSITION AC INVERTER CONTROLLED TOTAL LENGTH 58 METERS QUANTITY AVAILABLE: 1 Learn More