Search results for: 'heating w'

REFERENCE NUMBER: A-1213 (0101GHBXX12) A BABCOCK UNI-STAR STENTER, YEAR 2003, WIDTH 2400MM, 6 CHAMBERS, GAS HEATING, PIN CHAIN ONLY BABCOCK UNI-STAR STENTER ROLLER WIDTH: 2400 MM NUMBER OF CHAMBER: 6 HEATING: BY GAS CHAIN: PIN CHAIN ONLY YEAR: 2003 QUANTITY AVAILABLE: 1 Learn More

P-3544 ANGLADE YEAR 1996 WIDTH 2200mm 2 CHAMBERS GAS HEATING

ANGLADE
YEAR: 1996
WIDTH: 2200mm
PRE DRYER AND 2 CHAMBERS WITH PADDING MANGLE
GAS HEATING

QUANTITY: 1

Learn More

Learn More

MAKER: EH-WHA MACHINERY CO., LTD., KOREA USED GAS STENTER YEAR: 2009 ROLLER WIDTH: 2600mm WORKING WIDTH: 2400mm 7 CHAMBERS HORIZONTAL CHAIN PIN TYPE GAS HEATING SYSTEM INVERTER DRIVING SYSTEM COMPLETE SET WITH STANDARD ACCESSORIES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

A-1910 COMPLETE PLANT FOR DYEING BOBBINS, HIGH TEMPERATURE, LORIS BELLINI

(1) AUTOMATIC PREPARATION FOR CONES LORIS BELLINI, 2003 - PREPARATION OF CONES AND AUTOMATIC LOADING OF THE CONES ON THE EQUIPMENT LOOPS
(1) MINOX APPARATUS MODEL RPP/0-25, YEAR 1999 - LOAD 20KG - COMPLETE WITH TANK AND SAMPLER WITH 1 CONE
(2) HORIZONTAL APPARATUS LORIS BELLINI, YEAR 1988 - OPERATING AT PRESSURE OF 5 BAR AND AT TEMPERATURE 140°C - LOAD CAPACITY 500 BOBBINS APPROX KG.1000 EACH - PREPARATION TANK FOR WATER HEATING – POSSIBILITY TO WORK INDIVIDUALLY AND IN PARALLEL
(2) HORIZONTAL APPARATUS LORIS BELLINI, YEAR 1987 - OPERATING AT PRESSURE OF 5 BAR AND AT TEMPERATURE 140°C - LOAD CAPACITY 500 BOBBINS APPROX KG.1000 EACH - PREPARATION TANK FOR WATER HEATING - POSSIBILITY TO WORK INDIVIDUALLY AND IN PARALLEL
(1) DRYER CONDENSATION LORIS BELLINI
THE PLANT IS NOT SOLD SEPARATELY.

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5222 (131332SBNK12UF) L EH-WHA PLATINUM OIL STENTER YEAR 2008 WIDTH 3400mm USED EH-WHA OIL STENTER YEAR 2008 MODEL PLATINUM 10 CHAMBERS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: V-0046 AUTOMATIC ROLL SHRINK PACKING MACHINE MODEL ARPM-240I QUANTITY AVAILABLE: 1 Learn More

TT-2821 KUSTERS/RAMISCH DYEING PADDER MACHINES, YEAR 1968 TO 1996 ITEM 001 DYEING PADDER WITH TWO ROLLERS (FOR DYEING SAMPLES) QUANTITY: 1 ITEM 002 DYEING PADDER KUSTERS WITH TWO ROLLERS QUANTITY: 1 ITEM 003 DYEING PADDER RAMISCH KLEINEWEFERS QUANTITY: 1 ITEM 004 DYEING PADDER KUSTERS QUANTITY: 1 ITEM 005 DYEING PADDER KUSTERS QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6918 MENZEL MERCERIZING MACHINE, YEAR 2010 MERCERIZING MACHINE MENZEL MODEL OPTIMERC YEAR OF CONSTRUCTION 2010 ROLLER WIDTH 2000mm PRODUCTION SPEED 37 METER / MIN CAPACITY PER YEAR 10 MIO. METER ENTRY WIDTH J-BOX SLEVED GUIDER ERHART & LEIMER MODEL SRA 83 EXPANDING ROLLER 2 X WASHING BOXES FABRIC CAPAITY EACH 24 METER WASHING BOXES EQUIPPED WITH INDIRECT HEATING BETWEEN WASHING BOXES SQUEEZER STENTERING/SPREADING FIELD MONFORTS, CHAIN WITH CLIPS MERCERIZING UNIT WITH TOTAL 32 CYLINDERS FABRIC CAPACITY 27 METER 2 CYLINDER SQUEEZER AFTER MERCERIZING STABILIZING UNIT WITH TOTAL 27 CYLINDERS, FABRIC CAPACITY 18 METER AFTER STABILIZING 2 CYLINDERS SQUEEZER 2 X WASHING BOXES EACH WITH 24 METER FABRIC CAPACITY, WITH SQUEEZER 1 X WASHING BOX 24 METER FABRIC CAPACITY WITH ROWATEX HIGH CAPACITY SQUEEZER FABRIC DELIVERY WITH J-BOX, BIG BATCH WINDER MATERIAL: COTTON FABRIC WEIGHT OF GOODS: 80 TO 200 G/M2 AVERAGE 140 G/M2 PRODUCTION SPEED: 37 M/MIN TECHNICAL SPEED: 55 M/MIN PRODUCTION CAPACITY: 10 MILLION QUANTITY: 1 Learn More