Search results for: 'reference number -v-21'

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-2195 SASPE (SPEROTTO RIMAR) VELURA RAISING MACHINE YEAR 2001 WIDTH 2400mm SINGLE DRUM SASPE (SPEROTTO RIMAR) MODEL: VELURA RAISING MACHINE YEAR: 2001 SINGLE DRUM WIDTH: 2400mm HYDRAULIC TYPE WITH TOUCH MONITOR CONTROL MACHINE WITH DUCT SUCTION DEVICE IN RUNNING CONDITION QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-2126 MINOX PRT 3/C JET DYEING MACHINES YEAR 1988, 1990 and 1991 300 KILOGRAMS MINOX TYPE: PRT 3/C JET DYEING MACHINES YEAR: 1988, 1990 and 1991 148°c 3.5 BAR 3 ROPES 300KILOGRAMS TIME / TEMPERATURE PROGRAMMER WITH PNEUMATIC VALVES AUTOMATIC SEAM DETECTOR VALVES FOR DISCHARGE AND WASHING PRODUCTS INTRODUCTION TANK WITH ELECTROPUMP ELECTRIC PANEL QUANTITY AVAILABLE: 3 Learn More

S-1220 KUSTERS CALANDER AND EMBOSSING CALENDER, WORKING WIDTH 3400mm, YEAR 2002

KUSTERS CALANDER AND EMBOSSING CALENDER
MAKE: KUSTERS
YEAR: 2002
TYPE: 213.40/3400
WORKING WIDTH: 3400mm
3 CYLINDERS
COTTON – STEEL – RACOLAN
HYDRAULIC PRESSURE MAXIMUM 40 TONES
COMPLET ENTRY WITH METAL DETECTOR AND SEWING DETECTOR
5 DIFFERENT STEEL EMBOSSING CYLINDERS
PREPARED FOR OIL HEATING WITH PUMP AND VALVES
EXIT WITH SALVADE AXIAL A-FRAME ROLLING DEVICE
INCLUDING TWO MANUAL HAND CRANES
WITH FRAME TO CHANGE THE CYLINDERS

MACHINES ARE STILL RUNNING

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-2127 BRAZZOLI HT ROPE DYEING MACHINES YEAR 2001 800 KILOGRAMS BRAZZOLI TYPE: HT ROPE DYEING MACHINES YEAR: 2001 140°C 4.55 BAR LOW LIQUOR RATIO (FROM 1/6 to 1/8) TYPE: SIRIO HT 800 4 TUBES 800 KILOGRAMS EACH MACHINE WITH: TURBOVARIO DEVICE (VARIABLE BATH PASSAGE CROSS SECTION THAT GUARANTEES HIGH PRODUCTION SPEEDS AT VERY LOW OPERATING PRESSURE) SEAM DETECTOR 2 DYE STUFF TANKS AUXILLARY CHHEMICAL PRODUCT TANK ANALOG DOSING SYSTEM MAGNETIC LEVEL CONTROL LITRE COUNTER HIGH THERMAL GRADIENT HEAT EXCHANGER MICROPROCESSOR FOR COMPLETE TREATMENT CYCLE CONTROL REMOVABLE FILTER MODULAR CONTROL BOARD MAXIMUM FABRIC SPEED 600 MTS/MIN EXTREME VESATILITY OF THIS MACHINE ALLOWS TO PROCESS ANY KIND OF FABRIC (BOTH WOVEN and KNITTED) FROM A WEIGHT OF 50 GRAMS/MT to 800 GRAMS/MT PROGRAMMER APC504 BY AREL NOZZLES 80 to 90mm QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: C-2171 BRAZZOLI HT ROPE DYEING MACHINE, CAPACITY 800 KGS, YEAR 2001 DETAILS: BRAZZOLI 140°C HT ROPE DYEING MACHINE 4.5 BAR LOW LIQUOR RATIO (FROM 1/6 TO 1/8) TYPE SIRIO HT 800 4 TUBES CAPACITY: 800 KGS YEAR: 2001 TURBOVARIO DEVICE VARIABLE BATH PASSAGE CROSS SECTION THAT GUARANTEES HIGH PRODUCTION SPEEDS AT VERY LOW OPERATING PRESSURE SEAM DETECTOR 2 DYE STUFF TANKS AUXILIARY CHEMICAL PRODUCT TANK ANALOG DOSING SYSTEM MAGNETIC LEVEL CONTROL LITRE COUNTER HIGH THERMAL GRADIENT HEAT EXCHANGER MICROPROCESSOR FOR COMPLETE TREATMENT CYCLE CONTROL REMOVABLE FILTER MODULAR CONTROL BOARD MAXIMUM FABRIC SPEED 600 MTS/MIN EXTREME VERSATILITY OF THIS MACHINE ALLOWS TO PROCESS ANY KIND OF FABRIC BOTH WOVEN AND KNITTED FROM A WEIGHT OF 50 GRMS/MT TO 800 GRMS/MT PROGRAMMER APC504 BY AREL NOZZLES: 80 TO 90mm QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-3674 (880WUREXX7) L SANTEX TENTER YEAR 1997-PIN CHAIN -6 ZONES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: V-0046 AUTOMATIC ROLL SHRINK PACKING MACHINE MODEL ARPM-240I QUANTITY AVAILABLE: 1 Learn More