Search results for: 'two'

REFERENCE NUMBER:P-8699

TWO HEADS WEIGHING PACKING MACHINE

 

POWER SUPPLY: 220V 50/60Hz 500W

WEIGHTING RANGE: 50 TO 2000G

ACCURACY ≤±1g

HOPPER VOLUME: 60L

PACKING SPEED: 10 TO 20 BAG/MIN

MACHINE SIZE: 630X530X1660mm

MACHINE WEIGHT: 150KG

CAPACITY: 3 TO 4M³/H (CAN BE ADJUSTED)

VOLUME OF HOPPER: 0.15 M³

LIFTING HEIGHT: 1.9M (OR AS YOUR CUSTOMIZE)

VOLTAGE: AC 380V/500W

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-2008

TANDEM SET OF GESSNER LYNX 2000 NAPPERS YEAR 1997

 

TWO GESSNER LYNX 2000 KNIT GOODS AND DOUBLE ACTING 108” ELECTRONIC NAPPERS

VERY GOOD CONDITION

INCLUDES TWO SETS OF SPARE NAPPER ROLLS, ROLL SHARPENER AND GRINDER, FLOCK HOUSING

RACKS NOT INCLUDED WITH SPARE ROLLERS

YEAR:  1997

108” FACE WIDTH

ELECTRIC DRIVE

TWO NAPPERS ONE IN FRONT OF THE OTHER

24-ROLL NAPPERS

DOUBLE ACTING HAS TO DO WITH THE TYPE WIRE ON THE ROLLS AND THE DIRECTION THAT THE CYLINDER TURNS.

THE GESSNER “LYNX” ELECTRONIC NAPPER IS MADE TO RUN EITHER KNITS OR WOVENS; THERE IS A KEY WHICH YOU TURN TO SELECT THE MODE YOU WANT, KNIT-OR-WOVENS, AND THE CYLINDER REVERSES.

 

QUANTITY:  1

 

(EMAIL US FOR PICTURES)

Learn More

TT-2821 KUSTERS/RAMISCH DYEING PADDER MACHINES, YEAR 1968 TO 1996 ITEM 001 DYEING PADDER WITH TWO ROLLERS (FOR DYEING SAMPLES) QUANTITY: 1 ITEM 002 DYEING PADDER KUSTERS WITH TWO ROLLERS QUANTITY: 1 ITEM 003 DYEING PADDER RAMISCH KLEINEWEFERS QUANTITY: 1 ITEM 004 DYEING PADDER KUSTERS QUANTITY: 1 ITEM 005 DYEING PADDER KUSTERS QUANTITY: 1 Learn More

R-7198 SALVADE RELAX DRYER MACHINE, WORKING WIDTH 2400mm, YEAR 1995 – FOR KNITS

BRAND: SALVADE S.P.A. ITALY
MODEL: AVA
YEAR: 1995
WORKING WIDTH: 2400mm
TYPE: TWO PASSAGES OF KNITS, KNITS INPUT AND OUTPUT ON ONE SIDE (OPEN DRYER MACHINE)
GAS HEATING, TWO GAS BURNERS ITAS, MODEL: 84 A TBH
GAS BURNERS CAPACITY MAX.: 522 KW, 440,000 KCAL/H
SWITCHBOARD AND ELECTRICAL MOTORS: 380V, 50 HZ

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-2194 FONGS LONG TUBE HTHP DYEING MACHINES YEAR 2005 FONGS LONG TUBE HTHP DYEING MACHINES YEAR: 2005 10 x TWO-TUBES, 500 KILOGRAMS 4 x TWO-TUBES, 400 KILOGRAMS 4 x ONE-TUBE, 200 KILOGRAMS ECO 8 D2T ALL MACHINES ARE STOPPED QUANTITY AVAILABLE: 22 Learn More

REFERENCE NUMBER: A-1291 (01013JGHB12UM) A SANTEX SANTA SOFT 200 SOFTENING MACHINE – YEAR 2000 – WIDTH 2000 MM YEAR: 2000 ROLLER WIDTH 2000mm GAS AND STEAM HEAT PLAVA MOISTURE CONTROLS ENTRY SCRAY WITH GUIDERS TWO ROLL PADDER TWO SECTION CONTINUOUS TUMBLER EL SPREADING AND CENTERING DEVISE PLAITER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-9080 SANTEX SANTASOFT 200 SOFTING MACHINE 2000mm YEAR 2000 MAKER: SANTEX MODEL: SANTASOFT 200 YEAR 2000 ROLLER WIDTH: 2000mm QUANTITY AVAILABLE: 1 Learn More

TT-3426 MAGEBA DYEING AND FINISHING RIBBON LINE, WIDTH 620mm, YEAR 2014 BRAND: MAGEBA CONDITION: USED YEAR: 2014 QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6928 OSTHOFF SINGEING MACHINE, WIDTH 2400mm, YEAR 1992 OSTHOFF SINGEING MACHINE TYPE PK90 YEAR 1992 ROLLER WIDTH: 2400mm FABRIC INFEED WITH E+L KF10 BRUSHING TYPE VP87/1 SINGING WITH TWO BURNERS BRUSHING KLEINEWEFERS/RAMISCH, TYPE VI6, 2 BRUSHES DESIZING, TYPE FO-02/2, YEAR 2006, SQUEEZER BATCHER FILTER QUANTITY: 1 Learn More

REFERENCE NUMBER: J-2640
DYEING AND FINISHING PLANT FOR SALE

ITEM 001
THIES SAMPLE DYEING MACHINE
MODEL: MINISOFT SAMPLE
CAPACITY: 50 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 002
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
3 PORT SPLIT/SPLIT
CAPACITY: 900 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 003
THIES DYEING MACHINE
MODEL: ECOSOFT PLUS
2 PORT SPLIT/SPLIT
CAPACITY: 600 KGS
YEAR: 1999
MICROPROCESSOR CONTROL
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 004
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
1 PORT SPLIT/SPLIT
CAPACITY: 300 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: A460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 005
GASTON COUNTY DYEING MACHINE
MODEL: AQUAFLOW
2 PORT
CAPACITY; 250 KGS
YEAR: 1987
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING AND UNLOADING REEL
QUANTITY: 1

ITEM 006
THIES DYEING MACHINE
MODEL: SOFT TRD
2 TUBE
CAPACITY: 700 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 007 (also our J-2647)
LAFER OPEN WIDTH COMPACTOR MACHINE
MODEL: KSA 500 2400/2200
YEAR: 1998
LAFER TEXEN CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY, VERTICAL PIN CHAIN, WITH PLATE GUIDES, RAIL OPENING, PINNING BRUSHES, PINS ONLY, WITH SUPPORT SECTION FOR THE FABRIC IN THE CENTER, AT 10’ THERE IS A STEAMING SECTION, TOTAL LENGTH OF THE TENTER IS 30’, WITH AUTOMATIC LUBRICATION FOR THE CHAIN
• KSA 500 COMPACTOR BENCH WITH TEXEN CONTROLS
• TENSIONLESS FABRIC CONVEYOR
• PLAITOR AND FABRIC SCRAY WITH OPTICAL LOAD SENSOR
• INLINE INSPECTION BATCHER MACHINE, WITHH A BACK LIGHTED BOARD, MANUAL CUT
• SCALE TO WEIGHT THE FABRIC
QUANTITY: 1

ITEM 008 (also our J-2648)
SANTEX TUBULAR 4-ROLL EXTRACTION PAD
MODEL: SANTASTRETCH PLUS 140
YEAR: 1998
COMPOSED OF TURNTABLE, DETWISTER, TUBULAR 4-ROLL PAD WITH WET SPREADERS, PLAITOR
WITH ADDITION TANKS FOR SOFTENER
REEL FABRIC PLAITOR EXIT
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 009
SANTEX CONVEYOR DRYER FOR OPEN WIDTH AND TUBULAR FABRIC
MODEL: SANTASHRINK 4/5240
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER TO
• (2) SANTEX 2-ROLL PADS, RUBBER OVER RUBBER, 102” WIDE x 12” DIAMETER, STAINLESS STEEL PAN, 10-TON PAD, SWING-AWAY PAN, TENSION BAR WITH 2 STAINLESS STEEL MIXING TANKS, 75 GALLONS EACH
• DRIVEN SCROLL ROLLS WITH EDGE GUIDE CONTROL, WIDTH 95”
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY 45°, YEAR 1998, VERTICAL PIN CHAIN, 30’ LONG WITH TANDEMATIC PLATE GUIDES, RAIL GUIDES, PINNING BRUSHES, GUIDE SUPPORT FOR THE FABRIC, FABRIC CONVEYOR TO ENTER BOTH TUBULAR OR OPEN WIDTH FABRIC TO
• CONVEYOR DRYER 100” WIDE, 5 ZONES, 3-PASS WITH MAXON BURNERS, 5 CIRCULATING FANS TO CONVEYOR BELT TO PLAITOR
• ALL MOTORS AND SANTEX CONTROLS AND MONITORS
QUANTITY: 1

ITEM 010
SANTEX AG TUBULAR COMPACTOR MACHINE
MODEL: SANTASPREAD 140
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSIONS BAR ENTRY
• OPERATOR’S PLATFORM
• TENSION DEVICE
• DRIVEN SPREADER BARS
• STEAMING DEVICE
• TUBULAR COMPACTING BENCH
• FELT BLANKET ONTO THE CONVEYOR BELT
• PRECISION PLAITOR
• TABELTOP ELECTRONIC SCALE
QUANTITY: 1

ITEM 011
COMET NAPPER
MODEL: PEGSO-X4
YEAR: 1998
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
24 ROLLS WITH TURNING BARS FOR TUBULAR 90” WIDE
XYCOM CONTROLS
12-BAG COLLECTION SYSTEM AND PLAITOR
YEAR: 1996
QUANTITY: 1

ITEM 012
STENTEX TENTER FRAME
MODEL: STENTOTHERM 3300
YEAR: 1999
STENTEX CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION ENTRY TO TEXT-STAR TYPE GUIDER TO 2 ROLL PAD
• ADDITION TANK TOP SCRAY PAD TO TEXT-STAR TYPE GUIDER
• TWO ROLL PAD R/R 10 TON
• OPERATOR’S PLATFORM
• WORKING WIDTH 1800mm
• HORIZONTAL PIN CHAIN, KNIT ENTRY
• TANDEMATIC SPLITLEVEL DECURLERS
• OVERFEED
• PINNING BRUSHES
• STEAM BOX
• RAIL GUIDERS, 20 FEET ENTRY, 8 ZONES
• 80 FEET HOUSING
• SCREEN MONITORS
• GAS FIRED, MAXON OVEPAK 408 BURNERS
• HONEYWELL CONTROLS
• 3 FEET COOLING ZONE
• 2 COOLING CANS, SELVEDGE TRIMMERS
• PLIATOR, SCRAY
• ZONE IN LINE INSPECTION BATCHER
QUANTITY: 1

ITEM 013
ZIMMER ROTARY SCREEN PRINTING MACHINE
MODEL: R92-S153
YEAR: 1993
COMPOSED OF:
• TENSION BAR SKY ENTRY
• SCRAY
• CORINO BRUSH
• CORINO PRINT GUIDER
• ZIMMER PRINTER, 8 COLOR, 86” BLANEKT
• PRINT CONVEYOR DRYER, 30’ LONG, 3-ZONE, GAS FIRED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 014
SAFETY SWITCH BULLET NOSE SLITTER
MODEL: CUTTING
WITH REEL FABRIC PLIATOR
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

Learn More