Search results for: 'used S'

REFERENCE NUMBER: M-5222 (131332SBNK12UF) L EH-WHA PLATINUM OIL STENTER YEAR 2008 WIDTH 3400mm USED EH-WHA OIL STENTER YEAR 2008 MODEL PLATINUM 10 CHAMBERS QUANTITY AVAILABLE: 1 Learn More

USED WEFT STRAIGHTENER MAKE: BIANCO, ITALY YEAR: 2005 ROLLER WIDTH: 2200mm WORKING WIDTH: 2000mm QUANTITY AVAILABLE: 1 Learn More

TT-8579 FABRIC BEAM DYEING MACHINE, WIDTH 1500mm 1. FABRIC BEAM DYEING WINDER MACHINE 2. FABRIC TYPE WOVEN TYRICOT OR SATIN FABRIC 3. FABRIC WIDTH 1500mm 4. BEAM WIDTH 2000mm (MAX.) Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

TT-3426 MAGEBA DYEING AND FINISHING RIBBON LINE, WIDTH 620mm, YEAR 2014 BRAND: MAGEBA CONDITION: USED YEAR: 2014 QUANTITY: 1 Learn More

R-1728 MARIO CROSTA SHEARING MACHINE, WIDTH 3600mm, YEAR 2007

MARIO CROSTA SHEARING MACHINE
YEAR: 2007
FOR TERRY TOWEL
WIDTH: 3600mm
700.000 METER WORKED
WITH SPARE BLADE (NOT USED IN BOX)
WITH DUST SUCTION SYSTEM
RUNNING CONDITION

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5345 (220WENQXX1) L SANTEX SANTASHRINK 2-CHAMBER SINGLE PASS RELAX DRYER YEAR 2005 WIDTH 2400mm SANTEX SANTASHRINK SWISS TWO CHAMBER, SINGLE PASS RELAX DRYER YEAR 2005 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5236 (1313DYFAXX12) L SAMIL SIDC-6200 HP/HT JET DYEING MACHINE YEAR 2000 CAPACITY 500KG USED HP / HT JET DYEING MACHINE MAKER: SAMIL INDUSTRIAL CO., LTD., KOREA MODEL: SIDC-6200 YEAR: 2000 QUANTITY AVAILABLE: 1 Learn More

(1) MARSHALL AND WILLIAMS TENTER FRAME-100” FABRIC-4 ZONES-CLIP (1) KUSTER PAD (1) MAHLO WEFT STRAIGHTENER (1) SALVAGE EDGE TRIMMER MACHINE (HOME MADE-NO BRAND) (1) A-FRAME WINDER Learn More

REFERENCE NUMBER: M-5012 (1212YBZTXX11) L TMT PF-1593 MULTIPROGRAM AUTOCLAVE DECATIZING MACHINE YEAR 1998 AUTOCLAVE DECATIZING MACHINE MANUFACTURER: TMT MODEL: PF 1593 MULTIPROGRAM YEAR OF CONSTRUCTION: 1998 AUTOCLAVE DIAMETER: 1500mm SATIN CLOTH WIDTH: 1800mm SATIN CLOTH LENGTH STANDARD: 750 TO 1,000 MT. MAXIMUM FABRIC WIDTH: 1600mm POWER INSTALLED: 48 KW POWER USED: 30 KW STEAM PRESSURE: 6 TO 11 BAR COMPRESSED AIR PRESSURE: 6 TO 8 BAR MACHINE IS IN EXCELLENT CONDITION AND IS RUNNING AVAILABLE END OF DECEMBER 2014 QUANTITY AVAILABLE: 1 Learn More