Search results for: 'reference number -'

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

M-6248 SANTEX DRYER YEAR 1997 WIDTH 2400mm

DRYING MACHINE
MAKE: SANTEX
WORKING WIDTH: 2400mm
YEAR: 1997
DOUBLE FOULARD
GAS-HEATED
NUMBER OF ROOMS: 5

MACHINE IS IN VERY GOOD CONDITION

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5982 (8802DNWT7UX) L STRAYFIELD HIGH FREQUENCY DRYER 90 KVA YEAR 1988 – 1400mm HIGH FREQUENCY DRYER MAKE: STRAYFIELD MODEL TYPE: SS040/TP CURRENT POWER SUPPLY: 415 VOLT / 50 HZ SUPPLY PHASES: 3 SUPPLY KVA: 90 R.F. POWER OUTPUT: 40 KW OPERATING FREQUENCY: 27.12 MHZ YEAR OF MANUFACTURE: 1988 EVAPORATION CAPACITY: 52 KGS PER HOUR STANDARD CONVEYOR (BAND) WIDTH: 1400mm CONVEYOR LENGTH: INFEED: 3000mm DRYING CHAMBER: 5100mm OUTFEED: 1400mm TOTAL CONVEYOR LENGTH: 1400mm 1400mm OUTFEED WILL FIT INTO ONE 40’ FOOT CONTAINER THE EQUIPMENT IS ASSEMBLED AND CAN BE SEEN RUNNING PRICE IS AS-IS, INCLUDES SPARES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: V-1203 STALAM HIGH FREQUENCY DRYER POWER 2X85 KW, YEAR 2007 BRAND: STALAM MODEL RF: 2X85 KW HIGH FREQUENCY DRYER YEAR: 2007 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-1146 TEXIMA TENSIONLESS DRYER 3000mm YEAR 1991 MAKE: TEXIMA DIMENSIONS (L X W): 3000mm X 6000mm YEAR 1991 2 SECTIONS (6 METERS TOTAL LENGTH) 18 METERS OF FABRIC IN THE CABINETS ROLLS ARE MECHANICAL (NOT MOTOR DRIVEN) THE FABRIC MUST BE PULLED WITH ANOTHER MACHINE IN FRONT OF THE DRYER CAN BE CONNECTED TO OIL HEAT QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5345 (220WENQXX1) L SANTEX SANTASHRINK 2-CHAMBER SINGLE PASS RELAX DRYER YEAR 2005 WIDTH 2400mm SANTEX SANTASHRINK SWISS TWO CHAMBER, SINGLE PASS RELAX DRYER YEAR 2005 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1266 (010195GHB12RE) A SANTEX OVEN, WIDTH 2400 MM, YEAR 1992 SANTEX OVEN WORKING WIDTH: 2400 MM YEAR: 1992 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5218 (131321LCJM12RX) L LORIS BELLINI HANKS DYEING MACHINES AND ALEA HANKS DRYER YEAR 1994-2001 (2) X LORIS BELLINI HANKS DYEING MACHINES IN PARALLEL MODEL APPC-LV 250 YEAR 2001 CAPACITY 300 + 300 KGS, 4 + 4 EXTRACTABLE BASKETS WITH 5 TROLLEYS, DOUBLE SET OF STICKS 336 + 336 OF 1040mm, HEAD 55mm, 2 INTRODUCTION CANS, 2 PREPARATION CANS, ELECTRIC PANEL, PLC LORIS BELLINI (1) X LORIS BELLINI HANKS DYEING MACHINE MODEL APPC-LV 125 YEAR 2001 CAPACITY 150 KGS, 2 EXTRACTABLE BASKETS WITH 2 TROLLEYS, DOUBLE SET OF STICKS 168 OF 1040mm, HEAD 55mm, 1 INTRODUCTION CAN, 1 PREPARATION CAN, ELECTRIC PANEL, PLC LORIS BELLINI (1) X LORIS BELLINI HANKS DYEING MACHINE MODEL APPC-LV 25 YEAR 2001 CAPACITY 30 KGS, 2 EXTRACTABLE BASKETS WITH 2 TROLLEYS, DOUBLE SET OF STICKS 36 OF 1040mm, HEAD 55mm, 1 INTRODUCTION CAN, 1 PREPARATION CAN (1) X ALEA HANKS DRYER MODEL MNBC/81 YEAR 1994 COMPOSED OF: INPUT, SQUEEZER, DRYING ROOM N.1, HANKS TURNING SYSTEM BETWEEN THE 2 DRYING ROOMS, EXIT, ELECTRIC PANEL – USABLE FOR STICKS 1030 TO 1040mm MACHINES SOLD TOGETHER QUANTITY: 5 Learn More

REFERENCE NUMBER: M-3382 (88038EAW7RX) K STALAM RF YARN DRYER YEAR 2003 -85KW –WIDTH 1000mm STALAM RF YARN DRYER YEAR 2003 QUANTITY AVAILABLE: 3 Learn More

REFERENCE NUMBER: M-0171 STALAM RADIO FREQUENCY DRYER-85KW-YEAR 1999 MODEL RF 85 KW YEAR 1999 QUANTITY AVAILABLE: 1 Learn More