Search results for: 'a-2'

R-3261 OFFICINE VITTORIA ROASTER WORKING ANTIQUE - 20 KILOS

NICE RESTORED WORKING ANTIQUE FOR THE CIRCA 1950'S. THERE IS A LITTLE GAS BURNER ON THE END OF THE HEAT INLET TUBE - AS THAT IS A COMMON FIX AS ORIGINALLY THE HEAT CAME FROM AN INCINERATOR LOOKING COAL BURNER - SO THE STICKING OF A SMALL PACKAGE BURNER ON THE SAME INLET TUBE WORKS GREAT AS THE SUCTION EXHAUSTING THE AIR THROUGH THE ROASTING DRUM (PERFORATED) SIMPLY PULLS IN THE HEAT NEEDED AND EVERYBODY IS HAPPY. YOU WILL NEED TO SUPPORT THAT INLET ARM IN SOME MANOR.

ADDITIONAL CONCERN IS THERE IS NO SHOWN CHAFF COLLECTOR - AS I WILL HAVE TO VERIFY IF THERE IS ONE - OTHERWISE A SEPARATE CHAFF COLLECTOR WILL NEED TO BE ADDED. THIS IS ALL SET FOR EUROPEAN VOLTAGE - 3 PHASE.

KEEP IN MIND, THE BASE IS ALL CAST IRON - SO THIS OPERATES REALLY QUIETLY, AND THAT IS A GOOD THING. THE SHOWMANSHIP IS STRONG ON THIS MACHINE AS IT LOOKS REALLY GREAT ON A SHOWROOM OR COFFEEHOUSE FLOOR. AS IT IS MADE TO BE SEEN. THIS IS A PARTIAL PROJECT AS THE INSTALLATION WILL TAKE SOME DETAIL AND REMEMBER THAT THERE ARE NO OFFICIAL PARTS SUPPLY - BUT EVERYTHING ON THESE MACHINES IS QUITE EASY TO ACCESS AND HAVING A LOCAL MACHINE SHOP AT HAND IS PROBABLY GOING TO BE NEEDED IN THE FUTURE - AFTER ALL, IT IS A 1950'S VINTAGE.

ALLOW FOR A FLOOR SPACE OF 4' X 7' TO ACCOMMODATE THE ROASTER AND CHAFF COLLECTOR. (1.22M X 2.12M)

THERE WILL BE SOME COST TO CRATE - TO BE ADVISED AS SOON AS YOU KNOW THIS IS THE RIGHT MACHINE FOR YOUR OPERATION.

IN PERFECT WORKING CONDITION

QUANTITY: 1

R-3258 JOPER ROASTER - 15 KILOS

BATCH CAPACITY: 15 KG (33 LBS)
CONTROL DESIGN: MANUAL/ELAPSED TIME
TEMP READINGS: INLET AIR & BEAN TEMP
AIR CONTROL: ADJUSTABLE
CAPACITY PER HOUR: 60 KG (132 LBS)
ROASTING TIME: 15 MIN AVERAGE
COOLING TIME: 3 MIN
BURNING POWER: 140,000 BTU/H (LOW-NOX) 15 KILO
OPERATION TYPE BURNER: MICRO-FINE ADJ WITH LIMIT SET
GAS FLOW READER: YES
FUEL TYPE (GAS OVEN): NATURAL GAS
POWER REQUIREMENTS: 20 AMPS SINGLE & 10 AMPS 3 PHASE
VOLTAGE/FREQUENCY/PHASES: 220/50-60/TRIP-SINGLE
EXHAUST DIAMETER: 140mm (5.5 IN)
REMOTE CHAFF CYCLONE: POSITION ADJUSTABLE
WEIGHT: 737 KG (1,620 LBS)
HEIGHT: 7'3"
WIDTH: 3" CONTROLS
DEPTH: 8' W/ ADJUSTABLE REMOTE
NO. OF MOTORS: 4
ROASTER FAN (NORMAL WORK CONDITIONS RUNNING AT 60HZ. DAMPER 70 %): 4
COOLER FAN (RUNNING AT 60HZ): 1283 M3/H/755 CFM

QUANTITY: 1

R-3249 GIESEN COFFEE ROASTER W15A SELKIRK OXIDIZER - 15 KILOS

AN EXCEPTIONAL OPPORTUNITY FOR READY TO BE DELIVERED/INSTALLED EQUIPMENT CREATED BY A CHANGED BUSINESS MODEL.
NATURAL GAS
240V/60 HZ
BLACK/SILVER

SELKIRK SPECIALIZES IN THERMAL AFTERBURNERS FOR COFFEE ROASTING MACHINES FROM 10 TO 120 KGS PER BATCH. AFTERBURNERS ARE DESIGNED OF QUALITY MATERIALS FOR LONG SERVICE LIFE. INTEGRATED EFFICIENT GAS BURNERS WHICH REDUCE OPERATING COSTS. BURNER CONFORMS TO UL 295 STANDARD FOR COMMERCIAL/INDUSTRIAL GAS BURNERS. AFTERBURNER DESIGN PROVIDES LONG RETENTION TIMES TO ELIMINATE SMOKE AND ODORS FROM THE ROASTING PROCESS. STANDARD AFTERBURNER OPERATING TEMPERATURE IS 1250 F, BUT CAN EASILY BE ADJUSTED TO MEET LOCAL AIR QUALITY REQUIREMENTS. GAS BURNER IS COMPLETELY SELF MODULATING, AND OPERATOR CONTROLS ARE DESIGNED FOR EASE OF USE.

OXIDIZER SPECIFICATIONS:
TO-2CS321 THERMAL OXIDIZER WITH THE FOLLOWING DESIGN FEATURES:
WAYNE COMBUSTION LC 1500 BURNER WITH 1.5 MILLION BTU PER HOUR MAXIMUM INPUT.
DUNGS MULTIBLOC SAFETY VALVE MBC VEF 2500.
DUNGS LOW AND HIGH GAS PRESSURE SWITCHES.
SIEMENS LME SERIES FLAME SAFETY CONTROLLER.
FLAME SENSING ROD FOR FLAME VERIFICATION.
FULLY MODULATING TO MODULATE AT PRE-SET OPERATING TEMPERATURE;
BURNER AND CONTROLS CONFORM TO UL 295 STANDARD FOR COMMERCIAL INDUSTRIAL GAS HEATING EQUIPMENT.
OPERATOR FRIENDLY CONTROL SYSTEM.
TO-2CS321 DIMENSIONS:
OUTSIDE DIAMETER: 36"
OVERALL HEIGHT FROM FLOOR: 82"
INLET DIAMETER: 6"
OUTLET DIAMETER: 10"
EXTERIOR TO BE POWDERCOATED CARBON STEEL MATTE BLACK (OPTIONAL COLORS AVAILABLE).
4" OF HIGH DENSITY CERAMIC INSULATION BETWEEN INTERIOR AND EXTERIOR SURFACES.

QUANTITY: 1

R-3247 DIEDRICH IR-12 ROASTER WITH AFTERBURNER - 12 KILOS

HERE IS A ROASTER/AFTERBURNER/PROFILER PACKAGE THAT CONSIST OF A 2006 MACHINE - THAT WAS SENT IN TO THE DIEDRICH FACTORY FOR A COMPLETE REBUILD, UPDATE TO "SAME AS" NEW CONDITION. PLUS THE BIGGEST PROFILER AVAILABLE WAS ADDED AND A NEW AFTERBURNER WITH OVERSIZED MODULATING BURNER. ALL OF THIS IN 2013. SO THIS IS A TOTALLY UNUSUAL PACKAGE.

THE AFTERBURNER TAKES UP 42" SQUARE ON THE BASE WITH A ROUND TOP OF 36" DIAMETER. AND 85" TALL THERE IS SOME FLEXIBILITY ON PLACING THE ROASTER AND AFTERBURNER AS THE 2 ARE CONNECTED WITH PIPING THAT WOULD BE LOCALLY SUPPLIED IF DIFFERENT THAN THE ONE THAT COME WITH THE MACHINE.
IR 12 DIEDRICH COFFEE ROASTER
FULLY REBUILT AND UPGRADED BY DEIDRICH MANUFACTURING IN 2013
FULLY AUTOMATED WITH LASTEST PC BASED TECHNOLOGY
STATE OF THE ART AFTERBURNER BUILT IN 2013
DIMENSIONS: WIDTH 30" X DEPTH 55" X HEIGHT 77"
1000 POUNDS PLUS CRATING ON THE ROASTER
1500 POUNDS FOR THE AFTERBURNER
120 VOLT ELECTRICAL
BLACK AND BRASS IN COLOR.

QUANTITY: 1

R-3245 PROBAT DUETT ROASTER & DEMO UNIT - 1 KILO

PROBAT DUETT RESEARCH & DEMO UNIT: 1 KILO
THIS ROASTER IS NOT FOR EVERYBODY AS IT IS TOTALLY SPECIALIZED AND DESIGNED AS A "SAMPLE ROASTER" TO REALLY BIG AND HIGH YIELD ROASTERS ALSO MADE BY PROBAT OR GOTHOT BACK IN THE DAY. TOTALLY GEEK TYPE. ACTUALLY THIS MACHINE WAS ONLY USED IN THE PROBAT SHOWROOM WHEN IT WAS LOCATED IN BURLINGAME CALIFORNIA AND HAS NOT BE USED SINCE. EVEN THEN, IT WAS USED ONLY SEVERAL TIMES A QUARTER PR DURING A CLASS. WE ALWAYS PUT IN A LITTLE OVER 2 POUNDS SO AS TO GET 2 POUNDS OUT. BUT THERE IS A FLEXIBLE RANGE.

YOU PUT IN FROM 1.6 POUNDS TO 2.6 POUNDS AND CAN SET UP A PROFILE (OR RUN MANUALLY) SO THAT YOU CAN CONTROL AIR AND HEAT AND THE SPEED OF BOTH ALLOWING FOR AS FAST AS A 2 MINUTE ROAST FOR HIGH YIELD OR ADJUST TO NORMAL RANGES FOR MAKING INTRICATE STUDIES INTO CHANGING CONDITIONS OF PROFILING. EVERY DETAIL OF THE MACHINES INNARDS OR ELECTRICAL BOX IS ALL RELAY DRIVEN AND CONTROLLED. THE TOTAL ROAST PROCESS IS VISIBLE BEFORE YOUR EYES AND AS SOON AS THE ROAST REACHES YOUR SET POINT - THE COFFEE SIMPLY SLIDES AND DROPS INTO THE COOING CHAMBER AND YOU ARE READY FOR THE NEXT STUDY.

REQUIRES AN AIR CONNECTION. RUNS ON ELECTRIC ONLY. HAS LIGHTS ON INSIDE. COMES IN 2 BIG BOXES AND WE HAD IT INSTALLED WITH THE ROASTER ONLY IN THE LAB SHOWROOM AND THE CHAFF AND AIR HANDLING UNIT IN ANOTHER ROOM SO WE DID NOT HAVE TO LISTEN TO IT. YOUR OPTION.

BUILT IN 1995 AT PROBAT. NEEDS 3 PHASE POWER. BEEN IN STORAGE SINCE THOSE SHOWROOM DAYS BACK IN IN 97.

QUANTITY: 1

H-1272 TETRAPAK TBA/8 1000 BASE 90V YEAR 1997 TO 1998

TETRAPAK FILLING LINE:
YEAR: 1997
WORKING HOURS: 46,216
DESCRIPTION: INSTALLED, CURRENTLY IN PRODUCTION. IN PERFECT WORKING CONDITION

TETRAPAK TCA/21 CAP APPLICATOR (RECAP 2)
YEAR: 1998
WORKING HOURS: 81,030
DESCRIPTION: INSTALLED, CURRENTLY IN PRODUCTION. IN PERFECT WORKING CONDITION

TETRAPAK TRAY PACKER TTA 64 (1L)
WORKING HOURS: 40,721
DESCRIPTION: INSTALLED, CURRENTLY IN PRODUCTION. IN PERFECT WORKING CONDITION
QUANTITY: 1

H-1271 TETRA PAK FILLING LINE TBA/8 1000 SLIM - YEAR 1995 - PRODUCTION CAPACITY 6000 PPH

YEAR 1995
VOLUME: 1000 ML.
TRAY TYPE: SLIM LINE
OUTPUT: 6000 U/H
COMPLETELY REFURBISHED AND TRANSFORMED FROM 1.5 LT TO 1 LT SLIM AT THE END OF 2011
INCLUDING: CAP APPLICATOR: RECAP 3. PACKER TCBP 70
LINE IS IN EXCELLENT WORKING CONDITION

QUANTITY: 1

P-5099 PETRONCINI TT3602 ROASTER 360 KILOS

PETRONCINI
TYPE: TT3602
ROASTER
360 KILOS
MAXIMUM POUNDS PER BATCH: 792
SEPARATE FAN
COOLING AVERAGE POUNDS PER HOUR: 2772
OPERATOR CONTROL: REMOTE
9 FEET 9 INCHES x 20 FEET x 13 FEET 7 INCHES
NUMBER OF MOTORS: 4

QUANTITY: 1

P-5096 STA ROASTING SYSTEM MILLENIUM 3 240 KILOS

ABSOLUTE RESPECT OF THE COFFEE, BIG PERFORMANCE IN REDUCED SPACES WITH MOST HOT AIR THROUGH THE BEANS OF A DRUM BATCHING SYSTEM. 10 YEARS OF VERY EXCITING RESEARCH HAS GONE INTO THIS LINE OF MACHINES. MILLENNIUM CONCENTRATES TECNOLOGY INNOVATION IN THE RESPECT OF THE PRODUCT QUALITY WHICH HAS NEVER BEEN REALISED BEFORE. WE GIVE VALUE TO YOUR PRODUCT WHILE MAKING YOUR JOB SIMPLER.

TECHNICAL DATA:
CONTROL BOARD WITH PARTIAL OR FULL AUTOMATIC DRIVE.
COMPUTERIZED AUTOMATIC ROASTING PROCESS WITH RECORDING SYSTEM.
CONTROL THROUGH PLC. FITTING FOR PC
ALARM SYSTEM BY BUZZER AND SIGNAL LAMP WITH DISPLAY ANOMALIES
PRE-HEATING SYSTEM FOR RAW COFFEE IN STAND-BY
TEMPERATURE COFFEE CONTROL BOTH DURING ROASTING AND COOLING CYCLE
HOT AIR GENERATOR (STA IMPIANTI PATENTED SYSTEM).
"LOW INERTIA" DEVICE FOR IMMEDIATE STARTING OF PRODUCTION.
INDUSTRIAL BURNER WITH 3 LEVELS (VARIABLES) AT IMMEDIATE ANSWER
PROCESS AIR ADMITTANCE CONTROL SYSTEM.
FITTING FOR CLEANED AIR TO AIR EXCHANGER
CONTROL BOARD COMPLETE WITH LIGHTING DEVICE.
SCREENER WITH AUTOMATIC DRAWING.
WATER PUMP COMPLETE WITH TANK AND SAFETY “BY PASS” DEVICE.
PRE-COOLING SYSTEM CONNECTED TO THE ROASTING DRUM.
PRE-COOLING SYSTEM CONNECTED TO THE COOLER.
FIRE PREVENTION SYSTEM LINKED TO THE CHAFF COLLECTOR.
CYCLON FOR COOLER AND DESTONER.
SELF-CLEANING COOLING CONTAINER.
ADDITIONAL EMERGENCY DISCHARGE FOR COOLER.
INTEGRATED DESTONER.
SERVOCONTROL DEVICE FOR REMOTE ADJUSTMENT OF DESTONER.
SOUND PROOFING SYSTEM
GLOBAL SAFETY PROTECTION

QUANTITY: 1

P-5095 TRABATTONI T.P. NOVA WOOD FIRE ROASTER 120 OR 40 KILOS

WOOD FIRE 120 KGS. AND 240 KGS. COFFEE ROASTER OF RAW COFFEE FOR ANY BATCH, COOLING AND MIXING TANK, WOOD HEATING, TWO SEPARATE FANS FOR COOLING AND EXHAUST AIR ROASTING SUCTION, ELECTRIC PANEL, STAINLESS STEEL CHAFF COLLECTOR, ANY RAL PAINTING COLOR YOU PREFER. VERY HEAVY BASE - AS THE ENTIRE BOTTOM OF THIS ROASTER IS OLD WORLD CAST IRON - MAKE QUITE A VISUAL STATEMENT.

SPECIFICATIONS OF 120K:
DIMENSIONS: 169 INCHES X 83 INCHES X 142 INCHES H (430CM X 210CM X 360CM H)
WEIGHT: 7,276 LBS (3300 KG)
SMOKE PIPE DIAMETER: 30 CM
COOLING PIPE DIAMETER: 35 CM
CHAFF ARREST DIAMETER: 25 CM
ELECTRIC POWER REQUIRED: 9,5 KW
HEATING REQUIRED: 150,000 KCAL/HR

SPECIFICATIONS OF 240K:
DIMENSIONS: KG: 225 INCHES X 99 INCHES X 158 INCHES H (570CM X 250CM X 400CM H)
WEIGHT: 11,244 LBS (5100 KG)
SMOKE PIPE DIAMETER: 35 CM
COOLING PIPE DIAMETER: 40 CM
CHAFF ARREST DIAMETER: 25 CM
ELECTRIC POWER REQUIRED: 16,5 KW
HEATING REQUIRED: 300,000 KCAL/HR

QUANTITY: 1