Search results for: 'Roaster machin'

R-3261 OFFICINE VITTORIA ROASTER WORKING ANTIQUE - 20 KILOS

NICE RESTORED WORKING ANTIQUE FOR THE CIRCA 1950'S. THERE IS A LITTLE GAS BURNER ON THE END OF THE HEAT INLET TUBE - AS THAT IS A COMMON FIX AS ORIGINALLY THE HEAT CAME FROM AN INCINERATOR LOOKING COAL BURNER - SO THE STICKING OF A SMALL PACKAGE BURNER ON THE SAME INLET TUBE WORKS GREAT AS THE SUCTION EXHAUSTING THE AIR THROUGH THE ROASTING DRUM (PERFORATED) SIMPLY PULLS IN THE HEAT NEEDED AND EVERYBODY IS HAPPY. YOU WILL NEED TO SUPPORT THAT INLET ARM IN SOME MANOR.

ADDITIONAL CONCERN IS THERE IS NO SHOWN CHAFF COLLECTOR - AS I WILL HAVE TO VERIFY IF THERE IS ONE - OTHERWISE A SEPARATE CHAFF COLLECTOR WILL NEED TO BE ADDED. THIS IS ALL SET FOR EUROPEAN VOLTAGE - 3 PHASE.

KEEP IN MIND, THE BASE IS ALL CAST IRON - SO THIS OPERATES REALLY QUIETLY, AND THAT IS A GOOD THING. THE SHOWMANSHIP IS STRONG ON THIS MACHINE AS IT LOOKS REALLY GREAT ON A SHOWROOM OR COFFEEHOUSE FLOOR. AS IT IS MADE TO BE SEEN. THIS IS A PARTIAL PROJECT AS THE INSTALLATION WILL TAKE SOME DETAIL AND REMEMBER THAT THERE ARE NO OFFICIAL PARTS SUPPLY - BUT EVERYTHING ON THESE MACHINES IS QUITE EASY TO ACCESS AND HAVING A LOCAL MACHINE SHOP AT HAND IS PROBABLY GOING TO BE NEEDED IN THE FUTURE - AFTER ALL, IT IS A 1950'S VINTAGE.

ALLOW FOR A FLOOR SPACE OF 4' X 7' TO ACCOMMODATE THE ROASTER AND CHAFF COLLECTOR. (1.22M X 2.12M)

THERE WILL BE SOME COST TO CRATE - TO BE ADVISED AS SOON AS YOU KNOW THIS IS THE RIGHT MACHINE FOR YOUR OPERATION.

IN PERFECT WORKING CONDITION

QUANTITY: 1

R-3244 JABEZ BURNS ELECTRIC USED 2 BARREL SAMPLE ROASTER

27" TALL X 15" WIDE X 30" DEEP
6 TO 20 OUNCES OF GREEN PER CYLINDER
122 POUNDS IN WEIGHT PLUS CRATING
ALLOW FOR 200 POUNDS SHIPPING
4" EXHAUST PIPE TO THE OUTSIDE WORLD
220 ELECTRIC SINGLE PHASE
RUNS REALLY GREAT
THIS IS A ONE-OWNER MACHINE - AND IS NO LONGER IN USE DUE TO MOVING TO A NEW BUILDING AND SWITCHING TO A ONE BARREL UNIT - AS THEIR NEED WAS NOT SO GREAT
THIS IS SITTING IN STORAGE.
NOW, THIS IS HISTORY - AS THIS IS THE LAST MACHINE MADE BY JABEZ BURNS AND HAS LOTS OF SENTIMENTAL VALUE DUE TO THAT. PARTS ARE OFF THE SHELF AND EVEN THE HEATING ELEMENTS ARE STANDARD STOVETOP ELEMENTS AVAILABLE AT ANY APPLIANCE PARTS STORE. THE ONLY DOWNSIDE TO THIS ROASTER IS A LONGER HEAT-UP TIME OR WARM-UP THAN A GAS VERSION, BUT THE SMOOTH ROAST IS WHAT MATTERS. THE CHAFF COLLECTION DRAWER IS LOCATED UNDER THE MACHINE AND FRONT REMOVABLE.
SHIPS FROM MIDWEST AS IT IS IN A STORAGE UNIT.

QUANTITY: 1

R-3263 DIEDRICH IR-24U ROASTER & EQUIPMENT - 24 KILOS, YEAR 2008

VERY UNUSUAL THAT WE GET SUCH A COMPLETE ROASTING LINE AND HAVE ALL OF IT BE FROM THE SAME DIEDRICH MANUFACTURER. ALL COORDINATED ACCORDING TO COLOR AND IMAGE. NOTICE THAT THERE IS A COFFEE BAG ATTACHED TO THE OUTLET AIR OF THE DE-STONER - BUT THAT CAN BE VENTED TO THE OUTSIDE WORLD AS WELL - JUST A LONG AS YOU ARE NOT BLOWING COFFEE DUST ALL OVER THE PLANT. IN THE FACE OF THE ROASTER - SOME OF THE ORIGINAL PAINT HAS PEELED BACK DUE TO HEAT - AND THE GOOD NEWS IS THAT MOST ANY AUTO PARTS STORE HAS HIGH TEMP PAINT FOR MOTORCYCLE EXHAUST AND ENGINE BLOCKS - SO TOUCH UP FOR THAT AREA IS SIMPLE.

MECHANICALLY - THIS MACHINE HAS BEEN ALL MAINTAINED BY THE SAME PERSON SINCE IT WAS NEW 6.5 YEARS AGO - SO THAT IS REALLY GOOD. THE LAST USE WAS JUNE OF 2015 (REPLACED BY LARGER MACHINE) AND HAS BEEN SITTING EVER SINCE AND NOW IS IN THE WAY OF GREEN STORAGE SO ANXIOUS TO GET IT OUT OF THE WAY. FULL CRATING WILL BE NEEDED AND I THINK THAT IT WOULD ALL FIT INTO A 20 FOOT CONTAINER. A MODEST FEE FOR CRATING, BLOCKING AND CONTAINER LOADING WILL BE NEEDED.

ELECTRICAL ON THIS EQUIPMENT IS 230 VOLT 50/60HZ AS THE MOTORS ARE ALL DUAL VOLTAGE.
NATURAL GAS

QUANTITY: 1

P-5047 STA IMPIANTI ROASTER 10 KILOS

STA
MODEL: IMPIANTI
ROASTER
10 KILOS
ROASTING MACHINES LINE, PARTICULARLY SUITABLE FOR LITTLE PRODUCTION ACTIVITIES OF HIGH QUALITY ROASTED COFFEE, SUCH AS SHOPS, PASTRIES OR ARTISANAL LABORATORIES. SMALL SIZE, TECHNOLOGICALLY ADVANCED, CONFIRM THEM ELVES AS IDEAL TOOL FOR THE PRODUCTION OF SELECTED COFFEES IN LITTLE QUANTITY. MADE WITH THE SAME REQUIREMENTS FOR RELIABILITY AND SECURITY FEATURES OF THE BIGGER AND MORE SOPHISTICATED INDUSTRIAL ROASTING MACHINES, ARE AVAILABLE WITH HEATING GENERATOR TYPE GAS BURNER ( AVAILABLE ALSO BY ELECTRIC RESISTANCES ) AND AUTOMATIC CONTROL SYSTEM WITH SEMIAUTOMATIC MANAGEMENT.

TECHNICAL DATA:
ROASTER CAPACITY: 10 KG. / MAX. 13 KG. CYCLE
ROASTING CYCLE: 9 MINUTES ÷ 20
RAW COFFEE PROCESSING PER HOUR: 40 KG. ÷ 60
INSTALLED ELECTRIC POWER: 1,5 KW, SINGLEPHASE: 220 VOLT, 50 HZ | SPECIAL TRIPLEPHASE: 220 VOLT, 60 HZ
THERMAL POWER (NATURAL GAS OR LPG): 16000 KCAL/H

MAIN COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL
ROASTING DRUM
HEATING GENERATOR OF NEW GENERATION, PATENTED AND COMPLETE OF BURNER
RAMP VALVES FOR GAS SAFETY AND ELECTRIC DEVICE TO CHECK FLAMES RATIFIED AND COMPLETE OF ALARM SIGNAL
COOLING TANK IN STAINLESS STEEL
SAFETY PREVENTION SYSTEM ON THE COOLING TANK
SUPPORTING FRAME FOR THE OVER INDICATED COMPONENTS
ELECTRIC CONTROL BOARD ACCORDING CE RULES, INTEGRATED, COMPLETE OF PLC + TOUCH SCREEN DEVICE FOR ROASTING MACHINE CONTROL AND MANAGEMENT
POSSIBLE RECORDING OF ROASTING PARAMETERS
INDEPENDENT FANS FOR THE ROASTING DRUM AND THE COOLING TANK
INDEPENDENT MOTORS FOR THE ROASTING DRUM AND THE COOLING TANK
CYCLONE FOR CHAFFS COLLECTING

DETAILS OF COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL WITH MANUAL IN-LET OF COFFEE WITH DOOR UNLOADING SYSTEM
ROASTING DRUM: MADE BY A FIXED ELEMENT WITH DOUBLE WALLS INSULATED FOR THERMAL PROTECTION AND SUPPORT OF THE ROTATING CYLINDER MOVING THE PRODUCT. SUCH CYLINDER, COMPLETELY MADE IN COMPOUND STEEL TO OVERCOME THE THERMAL CHANGES, IS DEVELOPED WITH A PERFORATED PLATE FOR THE CONTAINMENT AND SPECIAL BLENDERS ON THE RIGHT AND LEFT SIDE PLACED ON DIFFERENT LEVELS TO GET A PERFECT BLENDING OF COFFEE. AT THE END OF THE ROASTING CYCLE, A WIDE DOOR WITH MANUAL OPENING/CLOSING SYSTEM ALLOWS THE PRODUCT UNLOADING.
HEATING GAS GENERATOR OF NEW CONCEPT, PATENTED, COMPLETE OF BURNER, RAMP VALVES FOR GAS SAFETY AND ELECTRONIC EQUIPMENTS FOR FLAME CONTROL RATIFIED AND COMPLETE OF SIGNALLING ALARM (N°2 FLAME LEVELS).
COOLING TANK IN STAINLESS STEEL: WIDE SURFACE PERFORATED WITH TWO ARMS AND CROSSED FLOWS. UNLOADING MOUTH WITH HAND DRIVE.
SUPPORTING FRAME: MONO-BLOCK, PLATE PRESS-BENDED, STEEL MADE, SUPPORTING THE ELEMENTS PREVIOUSLY DESCRIBED.
SAFETY PROTECTION FOR COOLING TANK
ELECTRIC CONTROL BOARD ACCORDING CE RULES INTEGRATED, COMPLETE OF PLC + TOUCH SCREEN FOR ROASTING MACHINE CONTROL AND MANAGEMENT.
POSSIBLE RECORDING OF ROASTING PARAMETERS
CYCLONE FOR CHAFFS COLLECTING
INDEPENDENT MOTORIZATION FOR ROASTING DRUM AND COOLING TANK
INDEPENDENT ELECTRIC-FAN FOR ROASTING DRUM AND ELECTRIC-FAN FOR COOLING TANK.

QUANTITY: 1

P-5046 TRABATTONI ROASTER 10 KILOS

TRABATTONI
ROASTER
10 KILOS
BEST MACHINE FOR WHOLESALE/RETAIL WITH A "SALES" APPEAL! THE COOLING BIN ON THE FRONT IS DOUBLE SIZED TO PROVIDE ROOM FOR BOTH MIXING AND BLENDING. THIS IS A RUGGED SOLID TRADITIONAL APPROACH TO ROASTING WITH AN IMAGE. BUILT FROM CAST IRON BASE AND FOUNDATION - THIS DOUBLE WALL DRUM ROASTER CAN BE BUILT IN GAS, PROPANE OR EVEN WOOD FIRED. IF WOOD FIRED, THEN THE ELECTRICAL PANEL WILL BE MOVED. THE CHAFF COLLECTOR CONNECTS IN ANY POSITIONS TO THE REAR OF THE MACHINE. COMES IN RED COLOR UNLESS OTHERWISE SPECIFIED. CUSTOMIZED DESTONER SIZE OPTION AS WELL AS THE AIR
SUCTION ADJUSTMENTS. CRATING INCLUDED IN THE PRICE.

FEATURES:
DIMENSION: 42" WIDE X 69" DEEP X 67"TALL & 24" CHAFF NET WEIGHT: 1,450 POUNDS EXHAUST TUBE TO OUTSIDE: 6" COOLING TUBE: 6" ELECTRIC POWER REQUIRED: 1.1 KW HEATING: 14,000 KCAL/H WITH GAS, PROPANE, OIL, OR WOOD FIRED WOOD FIRED UNITS AVAILABLE - PLEASE CALL FOR PRICE. STAINLESS STEEL CHAFF COLLECTOR IN REAR- ALLOW 24" SPACE

QUANTITY: 1

REFERENCE NUMBER: R-9600

PROBAT GG120 BATCH ROASTER

BATCH ROASTER

MAKE: PROBAT

MODEL: GG120

OUTPUT CAPACITY: 500 KG PER HOUR

MACHINE IN FULLY REBUILT CONDITION, WARRANTY 6 MONTHS

QUANTITY: 1

R-5056 PROBAT GO 240 COFFEE ROASTER

BRAND: PROBAT
MODEL: PROBAT GO 240
CATEGORY: COFFEE ROASTERS
CAPACITY: 240 KGS
STATE: EXCELLENT
STATUS: IN PRODUCTION
OF COFFEE ROASTER WITH A CAPACITY OF 240 KILOS PER BUMP
WITH COOLER FOR COFFEE, ELEVATORS TO THE HOPPER, SILO STORAGE, FUEL IN ACPM – DIESEL
IN PERFECT CONDITION
IS CARRIED OUT MAINTENANCE EVERY 6 MONTHS AND IS ROASTED INTO IT ONCE IN THE MONTH
A LUXURY OF MACHINE IN GOOD CONDITION

R-3274 GP90 PROBAT ROASTER - 90 KILOS

THIS MACHINE WAS THE SMALLEST MACHINE IN A LARGE PROBAT PLANT AND NOT USED EVEN DAILY - THEN THAT PLANT MOVED INTO A BIG NEW BUILDING AND THEY NEVER RE-INSTALLED THE MACHINE - SO IT SAT FOR THE LAST 10 YEARS THINKING "SOMEDAY" WE WOULD PUT IT BACK INTO USE . . . BUT THAT DAY NEVER HAPPENED . . . SO GET RID OF IT.

WE KNEW THE ORIGINAL SALE AND INSTALLATION BACK IN THE EARLY 70'S AND HAVE MONITORED THIS EQUIPMENT (IN AND OUT OF SERVICE) FOR ALL THIS TIME AND NOW WE ARE PLEASED THAT IT CAN GO OUT AND GET INTO ACTUAL USE. THIS MACHINE IS IN TOP CONDITION - AND ALL THAT IS NEEDED IS TO VERIFY THE GREASE IN THE BEARINGS AND START ROASTING AGAIN.

SET FOR PROPANE GAS - BUT CAN BE CONVERTED TO NATURAL GAS AS NEEDED.
240 V 3 PHASE POWER IN 60HZ

ALL SET FOR EASY US OR NORTH AMERICAN INSTALLATION. CAN SHIP IMMEDIATELY. PROBAT AND INDEPENDENT PARTS ARE ALL AVAILABLE AS OR IF NEEDED. THIS IS A HEALTHY MACHINE.

QUANTITY: 1

R-6857 TORREFACTO ROASTING MACHINES

THOR FKT
THE ROASTING MACHINE THOR FKT MB FOR ROASTED COFFEE WITH SUGAR IS BOUND AT HIGH HOURLY PRODUCTION. SINCE GREEN COFFEE IS ABLE TO OBTAIN A HOMOGENEOUS BAKING OF THE COFFEE IN 20 MINUTES FOR EACH CYCLE, WORKING IN AUTOMATIC MODE OR SEMI-AUTOMATIC.
THE ROASTING THOR FKT MB IS EQUIPPED WITH A STOVE DETACHED, BUILT IN STEEL AND REFRACTORY MATERIAL; THE BURNER, CAN BE GAS (TYPE MODULATING) OR OIL-IN 2/3 FLAME LEVELS, DEPENDING ON THE APPLICATIONS.
THE COOLING DRUM RECEIVES THE PRODUCT DIRECTLY FROM THE DISCHARGE OF THE ROASTING MACHINE.
THE INTERNAL MIXERS WERE DESIGNED AND TESTED IN ORDER TO GUARANTEE AN OPTIMAL COOLING OF THE PRODUCT.
THE DISCHARGE OF THE PRODUCT IS MADE BY REVERSING THE DIRECTION OF ROTATION OF THE DRUM; ON THE COOLING DRUM DOORS FOR THE INSPECTION AND CLEANING OF THE DRUM ARE PROVIDED.
ADDITIONAL FUNCTIONS OF ROASTING MACHINE THOR FKT MB:

POSSIBILITY OF TOTALLY OR PARTIALLY AUTOMATIC CONTROLLING BY PLC + TOUCH SCREEN AND SAVING PARAMETERS ROASTING PERFORMED BY ELECTROMECHANICAL/ELECTROPNEUMATIC DEVICES.
PLC WITH OPERATOR INTERFACE;
DISPLAY TO MONITOR THE FUNCTIONS OF ROASTING TIME AND TEMPERATURE;
AUDIBLE AND VISUAL ALARM ON THE MOTOR ALARM INSTALLED AND ON THE BURNER BLOCK.
COLOR: AVAILABLE ACCORDING TO CUSTOMER SPECIFICATIONS
OPTIONAL COMPONENTS:

ELECTRICAL CONNECTION MANAGEMENT SYSTEM WITH PC AND TOUCH-SCREEN
HEAT RECOVERY UNIT
POST-COMBUSTOR MODEL KAT
BRIQUETTE PRESS

R-3248 DIEDRICH IR-12 ROASTER - 12 KILOS

HERE IS THE CLASSIC DIEDRICH IR12. USED, 1989 WITH SOME NICE UPGRADES TO THE MANUAL ELECTRONICS. THE MACHINE HAS BEEN IN CONSTANT MECHANICAL WATCHFULNESS - AND THIS IT IS IN VERY NICE CONDITION. ONCE THIS MACHINE GETS RE-INSTALLED YOU WILL NEED TO ADJUST THE DRUM (THIS IS NORMAL ACTIVITY. AND AS WE TESTED IT DURING OUR REVIEW THE HIGH TEMP LIMIT SWITCH DID NOT SEEM TO SHUT ENGAGE AS WE WOULD HAVE EXPECTED, BUT WE DID NOT HAVE OUR TOOL KIT WITH US FOR ACTUAL DETAIL ANALYSIS. WE DID FIND THAT THE BEARINGS WERE NEW AND EVERYTHING SEEMS TO WORK GREAT. THE HIGH TEMP THING MIGHT HAVE JUST BEEN SET HIGHER THAN NORMAL. AS THIS IS SOMETHING TO CHECK DURING INSTALL. THAT DOES NOT STOP THE RUNNING OF THE MACHINE. IT IS NOW SITTING IN STORAGE - JUST WAITING FOR A NEW HOME.
29" WIDE
51" DEEP - BUT LEAVE ROOM IN THE BACK TO GET AROUND THE MACHINE FOR CLEANING AND REPAIR PLUS YOU HAVE TO RUN EXHAUST VENT TO THE OUTSIDE WORLD.
71" TALL
4" EXHAUST OUTLET - BUT YOU WILL WANT TO TRANSITION TO 5 OR 6" VENT TUBING DEPENDING ON YOUR INSTALLATION
NATURAL GAS
110 VOLT ELECTRICAL - 16 AMPS
ALLOW FOR A CRATED WEIGHT OF 1500 POUNDS. (60" X 42" X 78")
THIS IS A MANUAL WORK-HORSE

QUANTITY: 1