Search results for: 'f&k''

R-3261 OFFICINE VITTORIA ROASTER WORKING ANTIQUE - 20 KILOS

NICE RESTORED WORKING ANTIQUE FOR THE CIRCA 1950'S. THERE IS A LITTLE GAS BURNER ON THE END OF THE HEAT INLET TUBE - AS THAT IS A COMMON FIX AS ORIGINALLY THE HEAT CAME FROM AN INCINERATOR LOOKING COAL BURNER - SO THE STICKING OF A SMALL PACKAGE BURNER ON THE SAME INLET TUBE WORKS GREAT AS THE SUCTION EXHAUSTING THE AIR THROUGH THE ROASTING DRUM (PERFORATED) SIMPLY PULLS IN THE HEAT NEEDED AND EVERYBODY IS HAPPY. YOU WILL NEED TO SUPPORT THAT INLET ARM IN SOME MANOR.

ADDITIONAL CONCERN IS THERE IS NO SHOWN CHAFF COLLECTOR - AS I WILL HAVE TO VERIFY IF THERE IS ONE - OTHERWISE A SEPARATE CHAFF COLLECTOR WILL NEED TO BE ADDED. THIS IS ALL SET FOR EUROPEAN VOLTAGE - 3 PHASE.

KEEP IN MIND, THE BASE IS ALL CAST IRON - SO THIS OPERATES REALLY QUIETLY, AND THAT IS A GOOD THING. THE SHOWMANSHIP IS STRONG ON THIS MACHINE AS IT LOOKS REALLY GREAT ON A SHOWROOM OR COFFEEHOUSE FLOOR. AS IT IS MADE TO BE SEEN. THIS IS A PARTIAL PROJECT AS THE INSTALLATION WILL TAKE SOME DETAIL AND REMEMBER THAT THERE ARE NO OFFICIAL PARTS SUPPLY - BUT EVERYTHING ON THESE MACHINES IS QUITE EASY TO ACCESS AND HAVING A LOCAL MACHINE SHOP AT HAND IS PROBABLY GOING TO BE NEEDED IN THE FUTURE - AFTER ALL, IT IS A 1950'S VINTAGE.

ALLOW FOR A FLOOR SPACE OF 4' X 7' TO ACCOMMODATE THE ROASTER AND CHAFF COLLECTOR. (1.22M X 2.12M)

THERE WILL BE SOME COST TO CRATE - TO BE ADVISED AS SOON AS YOU KNOW THIS IS THE RIGHT MACHINE FOR YOUR OPERATION.

IN PERFECT WORKING CONDITION

QUANTITY: 1

R-3259 PRIMO 35 ROASTER TOP CONDITION 2009 - 15 KILOS

35 # PER BATCH
35 LBS. CAPACITY, CARBON STEEL DRUM, INFRARED CERAMIC BURNERS.
ROAST AND COOL AT THE SAME TIME - AS EACH FUNCTION HAS INDEPENDENT FANS, MOTORS AND CONTROL.
EXTRA SET OF BURNERS INCLUDED AS SPARES FOR FUTURE USE WHEN NEEDED
PROPANE HEAT - 96,000 BTU
220 VOLT 60HZ SINGLE PHASE ELECTRICAL
WIRED FOR CROPSTER OR ARTISEN PROFILE TRACKING
REMOTE CHAFF COLLECTOR
MAIN ROASTER BODY - 30" X 66" X 73" TALL - PLUS ROOM FOR PIPES AND MOTOR SERVICE IN THE BACK.
ALLOW ANOTHER 36" SQUARE AREA FOR CHAFF COLLECTION - AND KEEP IN MIND THAT THE LOCATION IS VERY USABE TO FIT YOUR FACILITY.

THIS PRIMO 35 IS A GOOD LOOKING ROASTER - AND IT HAS BEEN USED SPARINGLY SINCE 2009 AS THIS IS A "SMALL BATCH" USE BY A MUCH LARGER INSTITUTIONAL-TYPE OPERATION - BUT HIS WHOLE BEAN BUSINESS HAS GROWN AND IT IS NOT COST EFFECTIVE TO HAVE A DEDICATED ROASTMASTER JUST DOING 15 KILO PER BATCH. SO A LARGE MACHINE IS BEING INSTALLED. GOOD NEWS FOR THE BUYER.

ANYBODY LIKING DIEDRICH ROASTERS WILL BE HAPPY WITH THIS AS THEY ARE INTERNALLY SIMILAR AS THE OWNER OF PRIMO USED TO BE SHOP FOREMAN BACK WHEN DIEDRICH WAS LOCATED IN CALIFORNIA. ANOTHER THING THAT IS NICE ABOUT THIS MACHINE IS THE EASE OF WORKING ON IT IF AND WHEN IT REQUIRES ATTENTION. MOST EVERY PART IN THE MACHINE IS "OFF THE SHELF" AND THAT MAKES REPAIRS AND MAINTENANCE REAL EASY. MAKE SURE YOU LUBE ON SCHEDULE AND MAKE SURE YOU USE HIGH TEMP GREASE (LINK) AS EXAMPLE, ALTHOUGH THERE ARE OTHER SELECTIONS IN THAT SAME AREA OF THE WEB STORE.

LOTS OF PEOPLE USE THIS MACHINE AS A "STARTER MACHINE" SINCE IT IS SO EASY TO OPERATE. EVEN IF YOU DO NOT USE FANCY PROFILE TRACKING - IT IS STILL GREAT FOR MANUAL ROASTING AND HANDS-ON DEVELOPMENT.

QUANTITY: 1

R-3250 GIESEN COFFEE ROASTER AND SELKIRK OXIDIZER - 15 KILOS

AN EXCEPTIONAL OPPORTUNITY FOR READY TO BE DELIVERED/INSTALLED EQUIPMENT CREATED BY A CHANGED BUSINESS MODEL.
GIESEN W15A
DOUBLE EXHAUST/ROAST PROFILE SYSTEM
NATURAL GAS
240V/60 HZ
COLOR: RED
AVAILABLE WITH SELKIRK TO-2CS321 THERMAL OXIDIZER (USED)

GIESEN BROCHURE
SPECIFICATIONS:
GIESEN W15A
CAPACITY: 500 GRAM - 15 KG GREEN BEANS / PER BATCH / M. 60 KG/H
DRIVES: DIRECT FREQUENCY DRIVE MOTOR. ADJUSTABLE DRUM SPEED CONTROL AND ADJUSTABLE ROAST FAN SPEED CONTROL.
ROAST DRUM: DIGITAL PRESSION CONTROL. CAST IRON DRUM WITH HIGH PERFORMANCE BEARINGS.
HEATING SYSTEM: GAS BURNER BY PROPANE GAS (LPG, BOTTLE GAS) OR CITY GAS.
VOLTAGE: 1 PHASE 230V / 50-60 HZ
PAINTING: FREE CHOICE AND CUSTOMIZED / RAL CODES
ROAST ROOF: FREE CHOICE AND CUSTOMIZED
DIMENSIONS: LENGTH 1900mm X WIDTH 962mm X HEIGHT 2000mm
EXHAUST PIPE: EXHAUST PIPE DIAMETER FOR ROAST AIR: ∅ 200mm

THERMAL OXIDIZER FOR GIESEN W15 ROASTER
SELKIRK SPECIALIZES IN THERMAL AFTERBURNERS FOR COFFEE ROASTING MACHINES FROM 10 TO 120 KGS PER BATCH. AFTERBURNERS ARE DESIGNED OF QUALITY MATERIALS FOR LONG SERVICE LIFE. INTEGRATED EFFICIENT GAS BURNERS WHICH REDUCE OPERATING COSTS. BURNER CONFORMS TO UL 295 STANDARD FOR COMMERCIAL/INDUSTRIAL GAS BURNERS. AFTERBURNER DESIGN PROVIDES LONG RETENTION TIMES TO ELIMINATE SMOKE AND ODORS FROM THE ROASTING PROCESS. STANDARD AFTERBURNER OPERATING TEMPERATURE IS 1250 F, BUT CAN EASILY BE ADJUSTED TO MEET LOCAL AIR QUALITY REQUIREMENTS. GAS BURNER IS COMPLETELY SELF MODULATING, AND OPERATOR CONTROLS ARE DESIGNED FOR EASE OF USE.

OXIDIZER SPECIFICATIONS:
TO-2CS321 THERMAL OXIDIZER WITH THE FOLLOWING DESIGN FEATURES:
WAYNE COMBUSTION LC 1500 BURNER WITH 1.5 MILLION BTU PER HOUR MAXIMUM INPUT.
DUNGS MULTIBLOC SAFETY VALVE MBC VEF 2500.
DUNGS LOW AND HIGH GAS PRESSURE SWITCHES.
SIEMENS LME SERIES FLAME SAFETY CONTROLLER.
FLAME SENSING ROD FOR FLAME VERIFICATION.
FULLY MODULATING TO MODULATE AT PRE-SET OPERATING TEMPERATURE;
BURNER AND CONTROLS CONFORM TO UL 295 STANDARD FOR COMMERCIAL INDUSTRIAL GAS HEATING EQUIPMENT.
OPERATOR FRIENDLY CONTROL SYSTEM.
TO-2CS321 DIMENSIONS:
OUTSIDE DIAMETER: 36"
OVERALL HEIGHT FROM FLOOR: 82"
INLET DIAMETER: 6"
OUTLET DIAMETER: 10"
EXTERIOR TO BE POWDERCOATED CARBON STEEL MATTE BLACK (OPTIONAL COLORS AVAILABLE).
4" OF HIGH DENSITY CERAMIC INSULATION BETWEEN INTERIOR AND EXTERIOR SURFACES.

QUANTITY: 1

R-3249 GIESEN COFFEE ROASTER W15A SELKIRK OXIDIZER - 15 KILOS

AN EXCEPTIONAL OPPORTUNITY FOR READY TO BE DELIVERED/INSTALLED EQUIPMENT CREATED BY A CHANGED BUSINESS MODEL.
NATURAL GAS
240V/60 HZ
BLACK/SILVER

SELKIRK SPECIALIZES IN THERMAL AFTERBURNERS FOR COFFEE ROASTING MACHINES FROM 10 TO 120 KGS PER BATCH. AFTERBURNERS ARE DESIGNED OF QUALITY MATERIALS FOR LONG SERVICE LIFE. INTEGRATED EFFICIENT GAS BURNERS WHICH REDUCE OPERATING COSTS. BURNER CONFORMS TO UL 295 STANDARD FOR COMMERCIAL/INDUSTRIAL GAS BURNERS. AFTERBURNER DESIGN PROVIDES LONG RETENTION TIMES TO ELIMINATE SMOKE AND ODORS FROM THE ROASTING PROCESS. STANDARD AFTERBURNER OPERATING TEMPERATURE IS 1250 F, BUT CAN EASILY BE ADJUSTED TO MEET LOCAL AIR QUALITY REQUIREMENTS. GAS BURNER IS COMPLETELY SELF MODULATING, AND OPERATOR CONTROLS ARE DESIGNED FOR EASE OF USE.

OXIDIZER SPECIFICATIONS:
TO-2CS321 THERMAL OXIDIZER WITH THE FOLLOWING DESIGN FEATURES:
WAYNE COMBUSTION LC 1500 BURNER WITH 1.5 MILLION BTU PER HOUR MAXIMUM INPUT.
DUNGS MULTIBLOC SAFETY VALVE MBC VEF 2500.
DUNGS LOW AND HIGH GAS PRESSURE SWITCHES.
SIEMENS LME SERIES FLAME SAFETY CONTROLLER.
FLAME SENSING ROD FOR FLAME VERIFICATION.
FULLY MODULATING TO MODULATE AT PRE-SET OPERATING TEMPERATURE;
BURNER AND CONTROLS CONFORM TO UL 295 STANDARD FOR COMMERCIAL INDUSTRIAL GAS HEATING EQUIPMENT.
OPERATOR FRIENDLY CONTROL SYSTEM.
TO-2CS321 DIMENSIONS:
OUTSIDE DIAMETER: 36"
OVERALL HEIGHT FROM FLOOR: 82"
INLET DIAMETER: 6"
OUTLET DIAMETER: 10"
EXTERIOR TO BE POWDERCOATED CARBON STEEL MATTE BLACK (OPTIONAL COLORS AVAILABLE).
4" OF HIGH DENSITY CERAMIC INSULATION BETWEEN INTERIOR AND EXTERIOR SURFACES.

QUANTITY: 1

R-3248 DIEDRICH IR-12 ROASTER - 12 KILOS

HERE IS THE CLASSIC DIEDRICH IR12. USED, 1989 WITH SOME NICE UPGRADES TO THE MANUAL ELECTRONICS. THE MACHINE HAS BEEN IN CONSTANT MECHANICAL WATCHFULNESS - AND THIS IT IS IN VERY NICE CONDITION. ONCE THIS MACHINE GETS RE-INSTALLED YOU WILL NEED TO ADJUST THE DRUM (THIS IS NORMAL ACTIVITY. AND AS WE TESTED IT DURING OUR REVIEW THE HIGH TEMP LIMIT SWITCH DID NOT SEEM TO SHUT ENGAGE AS WE WOULD HAVE EXPECTED, BUT WE DID NOT HAVE OUR TOOL KIT WITH US FOR ACTUAL DETAIL ANALYSIS. WE DID FIND THAT THE BEARINGS WERE NEW AND EVERYTHING SEEMS TO WORK GREAT. THE HIGH TEMP THING MIGHT HAVE JUST BEEN SET HIGHER THAN NORMAL. AS THIS IS SOMETHING TO CHECK DURING INSTALL. THAT DOES NOT STOP THE RUNNING OF THE MACHINE. IT IS NOW SITTING IN STORAGE - JUST WAITING FOR A NEW HOME.
29" WIDE
51" DEEP - BUT LEAVE ROOM IN THE BACK TO GET AROUND THE MACHINE FOR CLEANING AND REPAIR PLUS YOU HAVE TO RUN EXHAUST VENT TO THE OUTSIDE WORLD.
71" TALL
4" EXHAUST OUTLET - BUT YOU WILL WANT TO TRANSITION TO 5 OR 6" VENT TUBING DEPENDING ON YOUR INSTALLATION
NATURAL GAS
110 VOLT ELECTRICAL - 16 AMPS
ALLOW FOR A CRATED WEIGHT OF 1500 POUNDS. (60" X 42" X 78")
THIS IS A MANUAL WORK-HORSE

QUANTITY: 1

R-3247 DIEDRICH IR-12 ROASTER WITH AFTERBURNER - 12 KILOS

HERE IS A ROASTER/AFTERBURNER/PROFILER PACKAGE THAT CONSIST OF A 2006 MACHINE - THAT WAS SENT IN TO THE DIEDRICH FACTORY FOR A COMPLETE REBUILD, UPDATE TO "SAME AS" NEW CONDITION. PLUS THE BIGGEST PROFILER AVAILABLE WAS ADDED AND A NEW AFTERBURNER WITH OVERSIZED MODULATING BURNER. ALL OF THIS IN 2013. SO THIS IS A TOTALLY UNUSUAL PACKAGE.

THE AFTERBURNER TAKES UP 42" SQUARE ON THE BASE WITH A ROUND TOP OF 36" DIAMETER. AND 85" TALL THERE IS SOME FLEXIBILITY ON PLACING THE ROASTER AND AFTERBURNER AS THE 2 ARE CONNECTED WITH PIPING THAT WOULD BE LOCALLY SUPPLIED IF DIFFERENT THAN THE ONE THAT COME WITH THE MACHINE.
IR 12 DIEDRICH COFFEE ROASTER
FULLY REBUILT AND UPGRADED BY DEIDRICH MANUFACTURING IN 2013
FULLY AUTOMATED WITH LASTEST PC BASED TECHNOLOGY
STATE OF THE ART AFTERBURNER BUILT IN 2013
DIMENSIONS: WIDTH 30" X DEPTH 55" X HEIGHT 77"
1000 POUNDS PLUS CRATING ON THE ROASTER
1500 POUNDS FOR THE AFTERBURNER
120 VOLT ELECTRICAL
BLACK AND BRASS IN COLOR.

QUANTITY: 1

R-3243 COFFEE ROASTERS COMPLETE PLANT TAKE OVER, CAPACITY 4,200 LBS PER HOUR

TWO (2) COMPLETELY AUTOMATIC AND DIGITAL JABEZ BURNS 23R 4 BAG ROASTERS, PROGRAMMED RECIPES, AUTOMATED BUCKET ELEVATORS, DESTONER, MICRO FILTER GREEN BEAN CLEANER, AFTERBURNER FOR BOTH ROASTERS INCLUDES:
- FIRST ROASTER: JABEZ BURNS GAS-FIRED BATCH COFFEE ROASTER, MODEL 23R ACO THERMALO, (MODEL 23R-02309 ON CONTROL PANEL), C/W MAXON OVENPAK GAS BURNER, MODEL 400, SIZE 422M, (ROASTER REBUILT 2013), C/W JABEZ BURNS AUTOMATIC CONTROL CONSOLE C/W ALLEN-BRADLEY PLC MODEL MICROLOGIX 1500, ALLEN-BRADLEY HMI CONTROL MODEL PANELVIEW 550, PRINTER, & WORKSTATION, (ROASTER "A")
- SECOND ROASTER: JABEZ BURNS GAS-FIRED BATCH COFFEE ROASTER, MODEL 23R ACO THERMALO (MODEL 23R-04307 ON CONTROL PANEL), C/W MAXON OVENPAK GAS BURNER, MODEL 400, SIZE 422M, (ROASTER REBUILT 2013), C/W JABEZ BURNS AUTOMATIC CONTROL CONSOLE C/W ALLEN-BRADLEY PLC MODEL MICROLOGIX 1500, ALLEN-BRADLEY HMI CONTROL MODEL PANELVIEW 550, PRINTER, & WORKSTATION, (ROASTER "B")
- TWO: JABEZ BURNS COOLER/STIRRER/DE-STONER MODEL STIRFLEX C/W AIRVEYING DISCHARGE DUCT, ERIEZ MAGNET MODEL 20" RE RPS, STYLE 9706716, W/ S/S ENCLOSURE, & S/S HOOD W/ LIGHTING
- S/S EXHAUST HOOD OVER COFFEE DUMP BIN C/W EXHAUST FAN & DUCTING
- UNIVERSAL BUCKET ELEVATOR W/ AIRVEYING PIPE TO GREEN BEAN CLEANER
- HAMATEC ROTARY SCREEN GREEN BEAN CLEANER, TYPE KSD500/1200AM, (2007), C/W LEESON AC VARIABLE SPEED MOTOR CONTROL
- MACTIFLO DUST COLLECTOR W/ DRUM DISCHARGE, C/W NATIONAL CONTROLS INTELLIGENT DUST CONTROL MODEL DNC-T2310-A10
- UNIVERSAL BUCKET ELEVATOR (FROM GREEN BEAN CLEANER), MODEL D3-100ED, C/W PNEUMATIC DISCHARGE GATE, (2) BEAN LOADING CONTROL PANELS, & (2) AIRVEYING PIPES TO ROASTER "A" & ROASTER "B"
- TWO: ROASTED COFFEE BEAN ELEVATED HOLDING BIN C/W PNEUMATIC DISCHARGE GATE & AIRVEYING DISCHARGE PIPE
- CIRCULATING BLOWER FOR ROASTING LINE "A" C/W SUPPORT PLATFORM
- ELEVATED CHAFF COLLECTION CYCLONE W/ DRUM DISCHARGE
- CIRCULATING BLOWER FOR ROASTING LINE "B" C/W SUPPORT PLATFORM
- MARS 4' X 4' FLOOR PLATFORM SCALE C/W DIGITAL WEIGHT INDICATOR, MODEL MSF-445, 5,000 LB. CAP. (SUBJECT TO CONFIRMATION) 24" X 30" PLATFORM SCALE C/W DIGITAL WEIGHT INDICATOR
- INPROHEAT INDUSTRIES NATURAL GAS THERMAL OXIDIZER AFTERBURNER, MAX. INPUT 1.4MM BTU/HR C/W MAXON OVENPAK-II GAS BURNER, SIZE 425, CONTROL PANEL C/W TEMPERATURE RECORDER AND HONEYWELL BURNER CONTROL

P-5101 PELLET PRESS FOR ECO CHAFF COLLECTION

THE PELLET PRESS IS MADE TO BE INSTALLED UNDERNEATH A CHAFF CYCLONE FROM A COFFEE ROASTER TO REDUCE THE VOLUME OF THE CHAFF (BY A FACTOR OF 100) AND TO EXCLUDE THE POSSIBILITY THAT THE CHAFF CATCHES FIRE. THE PRESS IS MOUNTED ON A MOBILE FRAME WHICH ALSO ENABLES THE POSSIBILITY FOR CATCHING THE CHAFF IN A BIN AFTER REMOVING THE PRESS. THE CYCLONE SHOULD BE EQUIPPED WITH A ROTATING VALVE (CAN BE DELIVERED AS AN OPTION WITH THE PRESS-SEE BELOW).

SPECIFICATIONS:
MOTOR 4 KW
FITS COFFEE ROASTERS WITH DRUM-SIZE UP TO 120 KG OF GREEN COFFEE
MOUNTED ON 4 WHEELS
ELECTRICAL CABINET WITH AUTOMATIC CONTROLLER & DISPLAY INTEGRATED INTO THE PRESS
DIMENSIONS (LXWXH) 800X400X1000MM / 2 FEET 8 INCHES X 1 FEET 4 INCHES X 3 FEET 4 INCHES

TO BE PROVIDED BY THE CUSTOMER:
3X400 V, 50 OR 60 HZ ELECTRICITY (PLEASE SPECIFY)
COMPRESSED AIR: 6 BAR / 87 PSI

QUANTITY: 1

P-5099 PETRONCINI TT3602 ROASTER 360 KILOS

PETRONCINI
TYPE: TT3602
ROASTER
360 KILOS
MAXIMUM POUNDS PER BATCH: 792
SEPARATE FAN
COOLING AVERAGE POUNDS PER HOUR: 2772
OPERATOR CONTROL: REMOTE
9 FEET 9 INCHES x 20 FEET x 13 FEET 7 INCHES
NUMBER OF MOTORS: 4

QUANTITY: 1

P-5097 PETRONCINI TT240 ROASTER 240 KILOS

PETRONCINI
TYPE: TT240
ROASTER
MAXIMUM POUNDS PER BATCH: 528
SEPARATE FAN COOLING: Y
AVERAGE POUNDS PER HOUR: 1848
OPERATOR CONTROL: REMOT
9 FEET 5 INCHES x 18 FEET 4 INCHES x 13 FEET
NUMBER OF MOTORS: 4

QUANTITY: 1