Search results for: '130$'

REFERENCE NUMBER: L-5977

AASTED/NEILSEN CHOCOLATE ENROBER, WIDTH 1300mm, YEAR 2015

 

CHOCOLATE ENROBER

MAKE: AASTED/NEILSEN

YEAR: 2015

WIDTH: 1300mm

HAS NOT BEEN USED, STILL IN SHIPPING CRATE

 

QUANITTY: 1

Learn More

REFERENCE NUMBER: A-2483 2KG COFFEE ROASTER - GAS TYPE ROASTER SIZE: 1200 X 800 X1100 mm ROASTER WEIGHT: 130 KG CHAFF COLLECTOR SIZE: 310 X 250 X910 mm CHAFF COLLECTOR WEIGHT: 20 KG DRUM CONSTRUCTION: DOUBLE-WALLED DRUM, 310 STAINLESS STEEL, WELDED BATCH SIZE: 0.5 TO 2.5KG AVERAGE ROASTING TIME: < 15 MINUTES BATCH INPUT POWER SINGLE PHASE, 220V, 15A, 50-60Hz DRUM MOTOR: 90W EXHAUST FAN MOTOR: 50W COOLING FAN MOTOR: 50W COOLING TRAY STIRRING MOTOR: 20W FUEL TYPE: LP GAS -OR- NATURAL GAS MAX. BTU: 30,000 BURNER CONTROL: MANUAL VALVE GAS CONNECTION: 1/2" NPT GAS PRESSURE REQUIRED: LP GAS: 7” OF WATER COLUMN NATURAL GAS: 11” OF WATER COLUMN GAS ORIFICES SIZE: LP GAS: 0.7 mm (INSTALLED AT FACTORY) NATURAL: 0.9 mm MAX GAS USAGE 3.3 LB/HR (0.5 KG/HR) TYPICAL ROASTER EXHAUST HIGH TEMPERATURE: 400°F TO 450°F CHAFF COLLECTOR EXHAUST HIGH TEMPERTURE: 300°F MAX EXHAUST: 600 CFM EXHAUST VENTING TYPE REQUIRED: CLASS III, POSITIVE PRESSURE BLUETOOTH DATA LOGGER: MODBUS CP210/ARTISAN SOFTWARE LOGGING THERMCOUPLE: BT, ET, INCOMING AIR COLOR ON ROASTER BODY: BLACK, RED, WHITE, PINK COLOR ON HOUSING PLATE: GOLDEN,SILVER,ROSE GOLD (MIRROR OR NO FINGERPRINT): BLACK TITANIUM, RIFFLED PLATE NET/GROSS WEIGHT: 150KG /160KG Learn More

REFERENCE NUMBER: L-5818

POLYSTYRENE FOAM PLATE FORMING MACHINE

 

RATED POWER: 90 KW

SHEET WIDTH: 800 TO 1080mm

MAX FORMING AREA: 1000 X 1300mm

WORKING SPEED: 17 TO 22 TIMES PER MINUTE

 

This machine is semi-automatic.

After forming, hydraulic cutting machine will be needed to cut out each product.

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: R-9572

COMPLETE DANGER FLAT WAFER OVEN LINE, YEAR AROUND 1975-1980 (WITH HEBENSTREIT CREAM LINE)

 

COMPLETE FLAT WAFER LINE

CONSITING OF:

DANGER WM 52 FLAT WAFER OVEN

DANGER WM 36 FLAT WAFER OVEN

HEBENSTREIT WZ-EM WAFER SPREAD CREAM LINE

POSSIBLY WITH SUBSEQUENT COOLING CHANNEL

AND SIG SB HORICONTAL FLOW WRAPPER INCL

WAFER CUTTER TABLE

 

MACHINE IS OFFERED IN ‘AS IS’ CONDITION, WITHOUT WARRANTY

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-7863

CONSTANTA TEEPACK TEABAG MACHINE YEAR 1969

 

TEABAG MACHINE

MAKE: CONSTANTA

MODEL: TEEPACK

YEAR: 1969

DOUBLE CHAMBER FILTER BAGS

DIMENSIONS 40mm x 60mm

SPEED AROUND 120/130 BAGS PER MINUTE

NO AUTOMATIC CARTONING DEVICE

 

IN GOOD, RUNNING CONDITION

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-7783

CONSTANTA TEEPACK STRING AND TAG TEABAGGING MACHINES

 

TEABAGGING MACHINES

TYPE: STRING AND TAG

MAKE: TEEPACK

MODEL: CONSTANTA

DOUBLE CHAMBER FILTER BAG WITH NATURAL FILTER PAPER (NOT HEAT-SEALABLE), WITH THREAD/TAG, CLOSED BY

 

PREFER TO BE SOLD AS ONE GROUP OF MACHINES

 

QUANTITY: 6

Learn More

R-6856 FUTURA K AUTOMATIC ROASTING MACHINES

AUTOMATIC ROASTING MACHINES RESULT OF LONG STUDIES AND LIVED EXPERIENCE.
THE ROASTING MACHINES SERIES FUTURA K ARE THE RESULT OF LONG STUDIES AND LIVED EXPERIENCE ALONGSIDE OUR CLIENTS COFFEE ROASTERS, FOR THE REALIZATION OF THE MOST ADVANCED MACHINERIES IN THE FIELD OF INDUSTRIAL COFFEE ROASTING.
THE COMPACT DIMENSIONS, RELIABILITY OF THE MATERIALS AND COMPONENTS, THERMAL MANAGEMENT WITH IMMEDIATE RESPONSE, CALIBRATED AND PARTICULARLY FUEL EFFICIENT, HIGH THERMAL AND ACOUSTIC INSULATION AND OTHER POSITIVE FEATURES, MAKE THESE MACHINES REFERENCEGUIDE IN PROFESSIONAL ROASTING FIELD.

MAIN COMPONENTS:
FEEDING HOPPER INSULATED WITH PNEUMATIC FILLER DEVICE, MOVABLE INLET, ELECTROPNEUMATIC UNLOADING CONTROL.
ROASTING DRUM MADE BY A FIXED HOUSING WITH DOUBLE INSULATING WALLS FOR THERMAL PROTECTION AND SUPPORTING THE ROTARY CYCLINDER THAT MOVES THE PRODUCT. THE WHOLE CYCLINDER IS MADE OF COMPOUND STEEL TO WITHSTAND THERMAL SHOCKS, ABSOLUTELY ODOURLESS, WITH PERFORATED SHEET FOR PRODUCT CONTAINEMENT, RIGHT AND LEFT BLENDERS SETTLED AT DIFFERENT LEVELS TO OBTAIN PERFECT MIXTURE.
WHEN THE ROASTING PROCESS IS FINISHED, THE COFFEE IS UNLOADED THROUGH A LARGE DOOR WITH ELECTROPNEUMATIC CONTROL OF OPENING AND CLOSING.
THE HEATING GENERATOR IS SPECIFICALLY DESIGNED FOR ROASTING LINE APPLICATIONS. THE PRINCIPLE OF HEATING IS BASED ON HOT AIR FLOWS BY CONVECTION. GAS OR GASOIL BURNER TYPE MODULATING OR MULTI LEVEL- FLAMES ACCORDING THE APPLICATION.
COOLING TANK WITH LARGE STAINLESS STEEL SURFACE, SELF CLEANING, WHERE THE PRODUCT IS MOVED BY MEANS OF 4 CROSSED ARMS. TWO DISCHARGES: ONE IS ELECTROPNEUMATICALLY DRIVEN AND THE OTHER IS MANUAL FOR EMERGENCY. DOOR OF INSPECTION AND EASY CLEANING OF THE LOWER SIDE.
PELLICLES SEPARATOR WITH EXTRACTION, BY WORM CONVEYOR OR INCINERATOR FOR CONSTANT EFFICIENCY OF THE AIR CHAFFS SEPARATION SYSTEM.
SUPPORTING FRAME IN TUBULAR PROFILES, STEEL MADE, TO CONTAIN AND SUPPORT THE OPERATING DEVICES, SO TO OBTAIN A COMPACT MACHINE-LIMITED ENCUMBRANCE, COMPLETE WITH PANELS FOR HEATING AND NOISE CONTAINMENT.
INDEPENDENT ELECTRIC CONTROL BOARD WITH PLC + TOUCH SCREEN AND ALL DEVICES FOR MACHINE CONTROL AND
MANAGEMENT, CAREFULLY WIRED AND EQUIPPED WITH ALL SIGNALS USEFULL FOR ROASTING PROCESS.

STANDARD EQUIPMENT:
AUTOMATIC ROASTING SYSTEM MANAGED BY PLC + TOUCH SCREEN WITH RECORDING FOR ROASTING CURVES – PROFILES.
VISUALIZATION BY MONITOR OF TEMPERATURES AND ROASTING FUNTIONS.
FIRE PREVENTION EQUIPMENT ON THE ROASTING DRUM AND COOLING TANK; ON THE CYCLONE-CHAFFS SEPARATOR IF EQUIPPED WITH WORM CONVEYOR FOR CHAFFS EXTRACTION.
ALARM SYSTEM BY BUZZER AND SIGNAL LAMP, UPON INTERVENTION OF THE OVERLOAD PROTECTION DEVICES ON THE ELECTRIC-MOTORS AND ON THE BURNER.
PROTECTING SAFETY SYSTEMS.
CYCLONE FOR COOLING TANK: STANDARD ON MOD. 240-300- 360-480.
OPTIONALS EQUIPMENT

COMPUTERIZED AUTOMATIC ROASTING PROCESS CARP MANAGED BY PC AND MONITOR.
HEATING RECOVERY SYSTE
SMOKE BURNER TYPE THERMICAL AND/OR CATALYST
CLEAN AIR ROASTING SYSTEM
CHAFFS COMPACTOR.

Learn More

L-4532 DATGEN ROASTERS

MODELS AVAILABLE: DR 1, 3, 5, 12, 25, & 35

MODEL DR-1
CAPACITY: 0.5 TO 1.25 KGS

MODEL DR-3
CAPACITY: 0.1 KGS TO 2.5 KGS
HOURLY ROAST OUTPUT: 10 KGS
VOLTAGE: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
40,000 BTU, 26.2 KW
FUEL: PROPANE OR NATURAL GAS
ROASTER WEIGHT: 100 KGS
ROASTER DIMENSIONS: 1400mm TALL X 1200mm LONG X 1100mm WIDE
EXHAUST PIPE DIAMETER: 130mm
COMPUTER CONNECTION: RS 485
DRIVE: 4 MOTORS
MOTOR POWER: 1 KW PER HOUR

MODEL DR-5
CAPACITY: 0.5 KGS TO 5 KGS
HOURLY ROAST OUTPUT: 15 KGS
VOLTAGE: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
90,000 BTU, 26.2 KW
FUEL: PROPANE OR NATURAL GAS
ROASTER WEIGHT: 300 KGS
DIMENSIONS: 1470mm TALL x 1750mm LONG X 1140mm WIDE
EXHAUST PIPE DIAMETER: 150mm
DRIVE: 4 MOTORS
MOTOR POWER: 2 KW PER HOUR

MODEL: DR-12
CAPACITY: 0.5 TO 12 KGS PER BATCH (MAX 15 KGS OF GREEN BEANS)
OPERATING TIME: 5 TO 18 MINUTES PER BATCH, DEPENDING ON ROASTING PROFILES
ROASTER DIMENSIONS: 1160mm WIDE X 1430mm LONG X 1800mm TALL
WEIGHT: 410 KGS
POWER: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
FUEL: PROPANE OR NATURAL GAS
GAS PRESSURE: NATURAL GAS ABOVE 2 KPA / PROPANE ABOVE 2.9 KPA
90,000 BTU PER HOUR
EXHAUST PIPE DIAMETER: 150mm
ROAST AIR SCFM/SCMH: 380 SCFM / 650 SCMH

MODEL: DR-30
CAPACITY: 2.5 TO 37.5 KGS

MODEL: DR-60
CAPACITY: 2.5 TO 75 KGS

 

Learn More

P-5082 TRABATTONI WOOD FIRED ROASTER 30 TO 36 KILOS

WOOD FIRE 30/36 KGS. COFFEE ROASTER OF RAW COFFEE FOR ANY BATCH, COOLING AND MIXING TANK, WOOD HEATING, TWO SEPARATE FANS FOR COOLING AND EXHAUST AIR ROASTING SUCTION, ELECTRIC PANEL, STAINLESS STEEL CHAFF COLLECTOR, ANY RAL PAINTING COLOR YOU PREFER. VERY HEAVY BASE - AS THE ENTIRE BOTTOM OF THIS ROASTER IS OLD WORLD CAST IRON - MAKE QUITE A VISUAL STATEMENT.

SPECIFICATIONS:
DIMENSIONS: 104 INCHES LONG X 51 INCHES WIDE X 94.5INCHES HIGH (265CM LONG X 130CM WIDE X 240CM HIGH)
ELECTRICAL CAN BE EITHER 220 VOLT, SINGLE PHASE OR 3 PHASE BOWER AND SPECIFY IF YOUR COUNTRY USES 50HZ OR 60HZ. WE LIKE THE 3 PHASE MOTORS THE BEST AS THEY RUN MORE QUIET

QUANTITY: 1

Learn More

P-5075 BUHLER VARIABLE PROFILE ROASTER 20 KILOS

THIS ROASTER OFFERS EXACTLY WHAT CUSTOMERS NEED TO PRODUCE TOP-QUALITY COFFEE. AN INNOVATIVE AND EASY-TO-USE PLC CONTROL SYSTEM ENSURES CONSTANT QUALITY DURING PRODUCTION BUT ALSO RETAINS THE ABILITY TO INFLUENCE THE PROCESSING WHEN NECESSARY. OPTIMIZED PARAMETERS CAN BE SAVED IN THE MACHINE’S MEMORY AND RE-USED. THE MACHINE IS MADE OF STAINLESS STEEL AND OTHER HIGH-QUALITY MATERIALS WHICH PROVIDE SUPERIOR HYGIENE AND MAKE CLEANING COMFORTABLE. THIS ROASTER PROVES THAT DURABILITY AND A MODERN DESIGN CAN BE COMBINED.

THE ROASTER BECOMES A PLUG-AND-PLAY MACHINE BY THE COMBINATION OF SEPARATE COOLING AND HEATING FANS WHICH ALLOW TO ROAST AND COOL AT THE SAME TIME WITH THE INCLUDED CYCLONE. HOT AIR IS THE BEST CHOICE TO ENSURE A UNIFORM ROAST, BECAUSE OF THE HOMOGENOUS HEAT TRANSFER.

THE VARIABLE DRUM SPEED OF THE ROASTING CHAMBER AND THE TWO STEP BURNER ALWAYS DELIVER THE BEST CONDITIONS FOR THE PRODUCT – NO MATTER IF THE BEANS ARE HEAVY AND SMALL AT THE BEGINNING OF THE PROCESS OR IF THEY HAVE ALREADY BECOME LIGHTER TOWARDS TO THE END OF THE ROAST. THE HELICOIDAL BLADES POWERED BY A VARIABLE DRUM SPEED DRIVE OFFER A PERFECT BLENDING AND AN OPTIMAL HEAT EXCHANGE AT ANY TIME OF THE PROCESS. MOREOVER, THE ERGONOMICALLY DESIGNED ROASTER PROVIDES MAXIMUM SAFETY.

THIS ROASTER WAS DESIGNED TO PROVIDE SMALL AND MEDIUM-SIZED COMPANIES WITH A FLEXIBLE HIGH-QUALITY SOLUTION. THE SOPHISTICATED DESIGN OF THE ROASTING MACHINE PLUS MODERN PROCESS TECHNOLOGY ENSURES A HIGH-QUALITY COFFEE PRODUCT THAT IS UNIFORMLY ROASTED – FROM THE SURFACE TO THE CORE OF EVERY SINGLE COFFEE BEAN.

THE COFFEE AND THE HOT AIR TEMPERATURE AS WELL AS THE ROASTING TIME PER BATCH IS PERMANENTLY MONITORED VIA THE TOUCH SCREEN. THE MACHINE’S DESIGN FEATURES AND INSULATING MATERIALS REDUCE INERTIA AND HEAT LOSS TO A MINIMUM, WHICH IMPACTS POSITIVELY ON WORKING ENVIRONMENTS AND FUEL CONSUMPTION.

FEATURES:
AUTOMATIC AND EASY-TO-USE PLC CONTROL SYSTEM WITH INTEGRATED TOUCH PANEL, PARAMETER MEMORY, TEMPERATURE TREND AND SAFETY FEATURES.
GOOD VALUE FOR MONEY.
INDIRECT, CONVECTIVE HOT-AIR SYSTEM FOR UNIFORM ROASTING.
FULL RANGE HEAT CONTROL - BURNER MODULATES BETWEEN 130,000 BTU ALL THE WAY DOWN TO A MERE 20,000 BTU
VARIABLE DRUM SPEEDS OFFER OPTIMAL HEAT TRANSFER AND PRODUCT QUALITY.
FUNCTIONAL AND ATTRACTIVE MACHINE DESIGN MADE OF HIGH-QUALITY MATERIAL.
STATE-OF-THE-ART TECHNOLOGY AND A PLC CONTROL SYSTEM OFFER USER-FRIENDLY AND EFFICIENT COFFEE ROASTING.
A WIDE VARIETY OF GREEN COFFEE CHARACTERISTICS AND BLENDS CAN BE PROCESSED TO HIGH-CLASS COFFEE PRODUCTS.
A USER-FRIENDLY AUTOMATION-PANEL ALLOWS THE PERFECT CONTROL OVER VARIOUS PROCESS PARAMETERS.
UL LISTED AND MADE RIGHT HERE IN MINNEAPOLIS.
GAS CONSUMPTION: RATED AT MAXIMUM - UP TO 150,000BTU (44KW/HR) OPERATES BEST BETWEEN 75 - 80,000 BTU

OPTIONAL FEATURES:
PNEUMATIC FEEDER
PNEUMATIC DESTONER/DISCHARGE UNIT
AFTERBURNER

QUANTITY: 1

Learn More