Search results for: 'Service manua'

L-4532 DATGEN ROASTERS

MODELS AVAILABLE: DR 1, 3, 5, 12, 25, & 35

MODEL DR-1
CAPACITY: 0.5 TO 1.25 KGS

MODEL DR-3
CAPACITY: 0.1 KGS TO 2.5 KGS
HOURLY ROAST OUTPUT: 10 KGS
VOLTAGE: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
40,000 BTU, 26.2 KW
FUEL: PROPANE OR NATURAL GAS
ROASTER WEIGHT: 100 KGS
ROASTER DIMENSIONS: 1400mm TALL X 1200mm LONG X 1100mm WIDE
EXHAUST PIPE DIAMETER: 130mm
COMPUTER CONNECTION: RS 485
DRIVE: 4 MOTORS
MOTOR POWER: 1 KW PER HOUR

MODEL DR-5
CAPACITY: 0.5 KGS TO 5 KGS
HOURLY ROAST OUTPUT: 15 KGS
VOLTAGE: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
90,000 BTU, 26.2 KW
FUEL: PROPANE OR NATURAL GAS
ROASTER WEIGHT: 300 KGS
DIMENSIONS: 1470mm TALL x 1750mm LONG X 1140mm WIDE
EXHAUST PIPE DIAMETER: 150mm
DRIVE: 4 MOTORS
MOTOR POWER: 2 KW PER HOUR

MODEL: DR-12
CAPACITY: 0.5 TO 12 KGS PER BATCH (MAX 15 KGS OF GREEN BEANS)
OPERATING TIME: 5 TO 18 MINUTES PER BATCH, DEPENDING ON ROASTING PROFILES
ROASTER DIMENSIONS: 1160mm WIDE X 1430mm LONG X 1800mm TALL
WEIGHT: 410 KGS
POWER: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
FUEL: PROPANE OR NATURAL GAS
GAS PRESSURE: NATURAL GAS ABOVE 2 KPA / PROPANE ABOVE 2.9 KPA
90,000 BTU PER HOUR
EXHAUST PIPE DIAMETER: 150mm
ROAST AIR SCFM/SCMH: 380 SCFM / 650 SCMH

MODEL: DR-30
CAPACITY: 2.5 TO 37.5 KGS

MODEL: DR-60
CAPACITY: 2.5 TO 75 KGS

R-3259 PRIMO 35 ROASTER TOP CONDITION 2009 - 15 KILOS

35 # PER BATCH
35 LBS. CAPACITY, CARBON STEEL DRUM, INFRARED CERAMIC BURNERS.
ROAST AND COOL AT THE SAME TIME - AS EACH FUNCTION HAS INDEPENDENT FANS, MOTORS AND CONTROL.
EXTRA SET OF BURNERS INCLUDED AS SPARES FOR FUTURE USE WHEN NEEDED
PROPANE HEAT - 96,000 BTU
220 VOLT 60HZ SINGLE PHASE ELECTRICAL
WIRED FOR CROPSTER OR ARTISEN PROFILE TRACKING
REMOTE CHAFF COLLECTOR
MAIN ROASTER BODY - 30" X 66" X 73" TALL - PLUS ROOM FOR PIPES AND MOTOR SERVICE IN THE BACK.
ALLOW ANOTHER 36" SQUARE AREA FOR CHAFF COLLECTION - AND KEEP IN MIND THAT THE LOCATION IS VERY USABE TO FIT YOUR FACILITY.

THIS PRIMO 35 IS A GOOD LOOKING ROASTER - AND IT HAS BEEN USED SPARINGLY SINCE 2009 AS THIS IS A "SMALL BATCH" USE BY A MUCH LARGER INSTITUTIONAL-TYPE OPERATION - BUT HIS WHOLE BEAN BUSINESS HAS GROWN AND IT IS NOT COST EFFECTIVE TO HAVE A DEDICATED ROASTMASTER JUST DOING 15 KILO PER BATCH. SO A LARGE MACHINE IS BEING INSTALLED. GOOD NEWS FOR THE BUYER.

ANYBODY LIKING DIEDRICH ROASTERS WILL BE HAPPY WITH THIS AS THEY ARE INTERNALLY SIMILAR AS THE OWNER OF PRIMO USED TO BE SHOP FOREMAN BACK WHEN DIEDRICH WAS LOCATED IN CALIFORNIA. ANOTHER THING THAT IS NICE ABOUT THIS MACHINE IS THE EASE OF WORKING ON IT IF AND WHEN IT REQUIRES ATTENTION. MOST EVERY PART IN THE MACHINE IS "OFF THE SHELF" AND THAT MAKES REPAIRS AND MAINTENANCE REAL EASY. MAKE SURE YOU LUBE ON SCHEDULE AND MAKE SURE YOU USE HIGH TEMP GREASE (LINK) AS EXAMPLE, ALTHOUGH THERE ARE OTHER SELECTIONS IN THAT SAME AREA OF THE WEB STORE.

LOTS OF PEOPLE USE THIS MACHINE AS A "STARTER MACHINE" SINCE IT IS SO EASY TO OPERATE. EVEN IF YOU DO NOT USE FANCY PROFILE TRACKING - IT IS STILL GREAT FOR MANUAL ROASTING AND HANDS-ON DEVELOPMENT.

QUANTITY: 1