Search results for: '1000mm'

C-4020 BENNINGER SIZING AND WARPING MACHINES, WORKING WIDTH 2200mm TO 4000mm, YEAR 1996 TO 1997

OFFER 001
BENNINGER SIZING MACHINE
YEAR: 1996 TO 1997
HEAD BEAMS WIDTH: 4000mm
BEAM DIAMETER: 1000mm

QUANTITY: 2

OFFER 002
BENINGER DIRECT WARPERS
YEAR: 1996 TO 1997
WORKING WIDTH: 2200mm
DIAMETER: 1000mm

QUANTITY: 2

OFFER 003
BENINGER SECTIONAL WARPER
WORKING WIDTH: 4000mm
DIAMETER: 1000mm

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4094

COGNETEX SC.400 PREPARATION LINE YEAR 1993

 

COGNTEX PREPARATION LINE

MODEL SC.400

YEAR 1993

 

COMPOSED OF:

- 1^ST GILL MODEL SCE.11.VA, CANS FEEDING, ELECTRONIC AUTOLEVELLER,

DELIVERY 1 SLIVER IN 1 CAN, DIAMETER 1000mm X 1200mm

- 2^ND GILL MODEL SC.22.V, CANS FEEDING,

DELIVERY 2 SLIVERS IN 1 CAN, DIAMETER 1000mm X 1200mm

- 3^RD GILL MODEL SC.24.V, CANS FEEDING,

DELIVERY 4 SLIVERS IN 2 CANS, DIAMETER 1000mm X 1200mm

 

RUNNING AT 380V, 50HZ, TRIPHASE

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: T-6837 AUTEFA, HERGETH, SPINNBAU NEEDLING+THERMOBONDING LINE, YEAR 1992 TO 2000 BRAND: AUTEFA, HERGETH, SPINNBAU NEEDLING+THERMOBONDING LINE YEAR: 1992 TO 2000 CONSISTING OF: 3 HERGETH BALE OPENERS, WORKING WIDTH: 1000mm 1 HERGETH FINE OPENER, YEAR: 2000, WORKING WIDTH: 1000mm 1 SPINNBAU DOUBLE DOFFER CARD, YEAR: 1992, WORKING WIDTH: 2500mm 1 AUTEFA CL 2003 CROSS-LAPPER, YEAR: 1992, INPUT: 2500mm, OUTPUT: 3000mm 1 ASSELIN DRAFTER, WORKING WIDTH: 3000mm 1 FEHRER NL 9/SRS PRE-NEEDLE LOOM, YEAR: 1992, WORKING WIDTH: 2700mm, STROKE: 60mm, 10000 NEEDLES/M, 1300 RPM 1 FLEISSNER OMEGA DRUM OVEN 1 COOLING CALENDER 1 EDELMANN CUTTING AND WINDING UNIT WORKING WIDTH: 2500mm QUANTITY: 1 Learn More

A. SEMI-AUTOMATIC N95 FACE MASK MACHINE
30 TO 45PCS/MIN
MAXIMUM ROLL DIAMETER: 600mm
NUMBER OF ROLLS FEEDING THE MACHINE: 4 ROLLS OR 4 LAYERS
WIDTH OF THE ROLL: 230mm
TOTAL KW OF THIS MACHINE: 3KW
FREQUENCY (KHZ) OF THE ROTARY ULTRASONIC DIE: 15KHZ 2600W
DIAMETER OF THE ROTARY DIE: 74mm
FLOOR SPACE DIMENSIONS OF THIS MACHINE: 3000mm X 1500mm
MACHINE WEIGHT: 400KGS
PACKING DIMENSIONS OF THE MACHINE: 1600mm X 1000mm X 1700mm(L X W X H)
HEIGHT OF THE MACHINE: 1960mm

B. N95 EARLOOP MACHINE
15 TO 20PCS/MIN
NUMBER OF PAIRS OF EAR LOOPS DONE PER MINUTE: 15 TO 20PCS/MIN
FLOOR SPACE DIMENSIONS OF THE MACHINE: 1200mm X 1000mm
MACHINE WEIGHT: 350KGS
PACKING DIMENSIONS OF THE MACHINE: 1200mm X 1000mm X 1500mm(L X W X H)
HEIGHT OF THE MACHINE: 1300mm
SPOT WELDING IS USED TO ADHERE THE CLIP TO THE MESK. NO GLUE IS USED.

C. N95 SEALING MACHINE
15 TO 20PCS/MIN
TOTAL KW OF THE MACHINE: 20K 2600W
FREQUENCY (KHZ) OF THE ROTARY ULTRASONIC DIE: 20K
FLOOR SPACE DIMENSIONS OF THE MACHINE: 600mm X 600mm
MACHINE WEIGHT: 100KGS
PACKING DIMENSIONS OF THE MACHINE: 700mm X 700mm X 1300mm (L X W X H)
HEIGHT OF THE MACHINE: 1200mm

D. N95 NOSE CLIP MACHINE
15 TO 20PCS/MIN
15 TO 20PCS/MIN
SEE VIDEO OF HOW THE CLIOP IS ATTACHED TO THE MASK.
DIMENSIONS OF THE MACHINE: 500mm X 500mm
WEIGHT OF THE MACHINE: 20KGS
https://youtu.be/4IGKM5TxsqY 

PACKED: IN ONE WOODEN CASE,
PACKAGE SIZE: 2000mm X 1500mm X 1900mm (L X W X H),
GROSS WEIGHT: ABOUT 1000KGS
WARRANTY OF MACHINE:1.5 YEARS
LEAD TIME IS 12 DAYS AFTER ORDER IS CONFIRMED

Learn More

C-4027 TSUDAKOMA AJL ZAX, WIDTH 1900mm, YEAR 1996 TO 2000, CAM, 2 COLORS

OFFER 001
TSUDAKOMA AJL
MODEL: ZAX
WIDTH: 1900mm
YEAR: 2000
CAM
TYPE: 1620B

QUANTITY: 8

OFFER 002
TSUDAKOMA AJL
MODEL: ZAX
WIDTH: 1900mm
YEAR: 1996
CAM
TYPE: 1620

QUANTITY: 32

Learn More

REFERENCE NUMBER: M-1619 (660145KDF5RM) RIETER CARDS C51 HP YEAR 2000-2003 RIETER CARDS C51 HP YEAR 2000-2003 QUANTITY AVAILABLE: 5 Learn More

REFERENCE NUMBER: T-6976 KARL MAYER DIRECT WARPING MACHINE AND BENNINGER V-CREEL, WORKING WIDTH 1600mm, YEAR 2007 KARL MAYER DIRECT WARPING MACHINE TYPE ZM-SP1800 DNC YEAR OF CONSTRUCTION 2007 WORKING WIDTH 1600mm Ø BEAMS 1000mm WITH 17 WARP BEAMS BENNINGER V-CREEL YEAR OF CONSTRUCTION +/- 1998 998 POSITIONS ON THE CREEL GAUGE 260mm REMARK: THE ORIGINAL MACHINE WAS WORKING WIDTH 1800mm BUT HAS BEEN TRANSFORMED BY K. MAYER TO WORKING WIDTH 1600mm QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6910 LAROCHE TEARING MACHINE, WORKING WIDTH 1400mm LAROCHE TEARING MACHINE TYPE SUPER EUROP WORKING WIDTH 1400mm 1 CYLINDER Ø 1000mm MANUAL FEEDING MOTOR 220/380 V 60 HP 45 KW FILTERS 1 SPARE CYLINDER QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6877 TRUTZSCHLER DK803 CARDS, YEAR 1996 TRUTZSCHLER DK803 CARDS YEAR 1996 WITH CFD AND CCD AUTOLEVELLER TRUTZSCHLER CHUTE FEED ALUMINIUM FLAT AUTO CAN CHANGER CANS DIAMETER 1000mm X 1200mm (40” X 48”) WEBFEED (3 LICKERIN SYSTEM) ELECTRONICAL BAUMULLER CENTRAL SUCTION AVAILABLE: IMMEDIATELY QUANTITY: 5 Learn More

REFERENCE NUMBER: T-6843 SPINNBAU NONWOVEN LINE, YEAR 1994 BRAND: SPINNBAU SHORT DESCRIPTION: NONWOVEN LINE YEAR: 1994 NONWOVEN LINE CONSISTING OF 1. CARD FEEDING: CARD FEEDING R&S, NEW, IN 2500mm WORKING WIDTH, CONSISTING OF: ONE R&S MATERIAL BIN IN 2500mm WORKING WIDTH, 600mm DEPTH AND A COMPLETE HEIGHT OF 2500mm, WITH TOP AND BOTTOM WINDOW AT BOTH SIDES, FILLING LEVEL CONTROLLED BY IN HEIGHT ADJUSTABLE INFRARED DEVICES. ONE DOOR AT THE BACKSIDE FOR CLEANING, LOCKED BY SECURITY SWITCHES. THE VITIATED AIR ESCAPES THROUGH THE PERFORATED SHEETMETAL AT THE TOP. THESE AREAS ARE COMPLETELY COVERED, THE OUTGOING AIR CAN BE FILTERED BY AN EXCISTING FILTERSTATION OR OPTIONALLY BY FILTERBAGS, 2 DELIVERY ROLLERS. ONE R & S CHUTE FEEDER IN 2500mm WORKING WIDTH CONSISTING OF: ONE OPENING ROLLER DIAMETER 450mm, ONE VIBRATION CHUTE, FIBRELEVEL CONTROLLED BY ULTRASONIC, CHUTE ADJUSTABLE OVER TOOTH RAILS IN DEPTH FROM 80 TO 240mm, TWO DRAWING OFF ROLLERS, ONE FEEDING TABLE WITH TRANSILON BELT, PREPARED FOR SERVOLAP. DRIVES: DELIVERY ROLLERS: AC -GEARBOXMOTOR 0.55 KW, FC OPENING ROLLER: AC-MOTOR 2.2 KW VIBRATION: AC-GEARBOXMOTOR, 0.55 KW, FC FEEDING TABLE: AC-GEARBOXMOTOR, 0.55 KW, FC 2. CARDING; ONE SPINNBAU DOUBLE DOFFER CARD, IN 2500mm WORKING WIDTH, YEAR 1994: CARD, FOLLOWING EQUIPPED: 1 CYLINDER FEEDING DEVICE WITH FEED PLATE: 1 FEED ROLLER DIAMETER 159mm 1 LICKER-IN DIAMETER 292mm PRE-OPENING: 1 BREAST DIAMETER 412mm 1/1 WORKER/STRIPPER DIAMETER 213/118mm 1 INTERMETE ROLLER DIAMETER 412mm CARD: 1 MAIN CYLINDER DIAMETER 1500mm 5/5 WORKERS/STRIPPERS DIAMETER 213/118mm 1 DOFFER, TOP DIAMETER 550mm 1 DOFFER, BOTTOM DIAMETER 550mm 2 CONDENSING ROLLERS TOP DIAMETER 292mm TOP DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. BOTTOM DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. DRAWING OFF TABLES: TOP TRANSILON BELT BOTTOM: TRANSILON BELT COVERS: THE CARD HAS COVERS TO CLAP UP AND DOWN (SECURED WHEN CLAPPED UP), THE SIDES ARE FULLY COVERED AND ELECTRONICALLY LOCKED. RIGID WIRE: ONE COMPLETE SET OF RIGID WIRE, MOUNTED, FOR FIBRES 1.5 DTEX - 17 DTEX, CAPACITY UP TO 800 KG/H ELECTRIC: VOLTAGE: ~400 V AC, 3 PHASES CONTROL VOLTAGE: ~220 V AC, =24V DC FREQUENCY: 50 Hz COLOUR: MACHINE: RAL 5015/ 9001 (IF YOU LIKE WE CAN CHANGE) CONTROL CABINET: RAL 7032, GREY SWITCH BOARD: RAL 7032, GREY ELECTRICAL DRIVES: FEED ROLLER: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED LICKER-IN: MECHANICAL FROM BREAST BREAST: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED WORKERS BREAST: MECHANICALLY FROM BREAST INTERMEDIATE ROLLER: MECHANICALLY FROM MAINSWIFT MAIN SWIFT: 1 AC-MOTOR FREQUENCY CONTROLLED WORKERS: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED DOFFERS: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED CONDENSING ROLLERS: 1 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF DEVICES: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF TABLES: 2 AC GEARBOXMOTORS, FREQUENCY CONTROLLED SWITCHBOARDS AND CONTROLS: SWITCHBOARDS RITTAL SERIES, COMPLETE WIRED. SWITCHBOARDS WITHOUT COOLING DEVICES. CONTROL CABINET OPERATION WITH COLOURED SCREEN, FITTED IN CONTROL CABINET OPERATED BY SIEMENS SPS S7-300 1 SET OF CABLE MATERIAL: FOR 20 MTR LENGTH BETWEEN MACHINERY AND SWITCHBOARD WITHOUT INSTALLATION MATERIAL ERECTION AND STARTING UP: IS NOT INCLUDED, SHOULD BE MADE BY US FOUNDATION: ONE FOUNDATION IN 750mm HEIGHT, WITH SIDEWALKS AROUND, TWO STEPS ON EACH SIDE. SUCTION: CONNECTION FOR THE DOFFER AND TOP OF CARD 3. CROSSLAPPING, NEW: ONE REISKY & SCHLESE CROSSLAPPER, TYPE RS 100 IN 2500mm WORKING WIDTH (BELT WIDTH 2800mm) AND 2500mm LAPPING WIDTH (BELT WIDTH 2700mm) MAX INFEEDING SPEED: 100 MTR/MIN, DELIVERY SPEED OF DRAWING OFF TABLE: FROM 0 TO 20 MTR/MIN, CONSISTING OF: ONE FEEDING TABLE IN 1000mm LENGTH MOUNTED IN IT'S OWN FRAME, ADJUSTABLE IN THE HEIGHT ACCORDING TO THE DOFFER, FURTHER THE COMPLETE FEEDING TABLE CAN BE MOVED UP IF THE DOFFER HAS TO BE DRAWN BACK. THE CROSSLAPPER ITSELF GUIDES THE WEB FROM THE INFEED DOWN TO THE OUTLET BETWEEN THE CONVEYORS, WHICH HAVE ANTISTATIC PROPERTIES. THE TENSION AND THE DISTANCES BETWEEN THEM CAN BE ADJUSTED ACCORDING TO THE DIFFERENT FIBRES. THE CONVEYORS ARE EQUIPPED WITH AUTOMATIC EDGE GUIDES, SO THAT THEY ARE RUNNING IN THE CENTRE. THE LAID WEB IS COVERED BY THEM. THE SERVO- DRIVES ARE RESPONSIBLE FOR THE PERFECT SYNCHRONISATION AND THE EXACT REVERSAL OF THE CARRIERS. THE SWITCHBOARD IS EQUIPPED WITH A COULOURED TOUCHSCREEEN, WHERE ALL NECESSARY PARAMETERS CAN BE PROGRAMMED, ALSO DIFFERENT CURVES FOR STORING THE WEB DURING REVERSALS. DRIVES: FEED TABLE: AC-SERVO-MOTOR BELT 1: AC-SERVO-MOTOR BELT 2: AC-SERVO-MOTOR TOP CARRIER: AC-SERVO-MOTOR BOTTOM CARRIER: AC-SERVO-MOTOR DRAWING OFF TABLE: AC-SERVO-MOTOR HEIGHT DRAWING OFF TABLE LEFT: AC-LINEARMOTOR HEIGHT DRAWING OFF TABLE RIGHT: AC-LINEARMOTOR OPERATION: BY COLOURED TOUCHSCREEN, SIEMENS IN CONTROL CABINET OF CARD. PARAMETERS: MANUEL / INLINE INFEED SPEED DRAFT (INFEED SPEED/LAYING SPEED) NUMBER OF LAPS LAPPING WIDTH FROM MIDDLE TO THE LEFT AND TO THE RIGHT DRAWING OFF SPEED AUTOMATICALLY SHOWN DEPENDING ON LAYERS DARWING OFF TABLE HEIGHT LEFT / RIGHT LAYING SPEED RECEIPES FAULT SHOWING SWITCHBOARD AND ELECTRONIC DEVICES: SWITCH BOAD RITTAL, COMPLETE WIRED. SWITCHBOARD WITHOUT COOLING DEVICE. CONTROL PANNEL RITTAL. CONTROLLED BY S7 SIEMENS 10000mm OF CABLES BETWEEN SWITHBOARD AND MACHINE/CONTROLPANEL QUANTITY: 1 Learn More