Search results for: 'Edge+and'
-
R-7540 OSTHOFF DOUBLE-JET SINGEING & DESIZING RANGE, YEAR 2002 – 3200mmREFERENCE NUMBER: R-7540
Learn More
OSTHOFF DOUBLE-JET SINGEING & DESIZING RANGE
TYPE U 97/2
WORKING WIDTH 3200mm
ROLLER WIDTH 3400mm
YEAR 2002
QUANTITY: 1 -
T-6544 SYNTHETIC BLOOD PENETRATION TESTER FOR SURGICAL MASKREFERENCE NUMBER: T-6544
SYNTHETIC BLOOD PENETRATION TESTER FOR SURGICAL MASK
TECHNICAL INDICATORS:
1. THE PROTRUDING SAMPLE FIXING DEVICE CAN SIMULATE THE ACTUAL USE STATE OF THE MASK, SET ASIDE THE TEST TARGET AREA WITHOUT DESTROYING THE SAMPLE, AND DISTRIBUTE THE SYNTHETIC BLOOD IN THE TARGET AREA OF THE SAMPLE.
2. THE SPECIAL FIXED-PRESSURE INJECTION DEVICE CAN EJECT A CERTAIN VOLUME OF SYNTHETIC BLOOD IN A CONTROLLED TIME.
3. IT CAN FULLY SIMULATE THE INJECTION SPEED CORRESPONDING TO THE AVERAGE BLOOD PRESSURE OF HUMAN BODY OF 10.6KPA, 16KPA AND 21.3KPA.
4. A FIXED TARGET PLATE IS SET TO BLOCK THE HIGH-PRESSURE EDGE PART OF THE INJECTED LIQUID FLOW AND ONLY ALLOW THE STEADY FLOW PART TO BE SPRAYED ON THE SAMPLE, WHICH INCREASES THE ACCURACY AND REPEATABILITY OF THE LIQUID VELOCITY SPRAYED ON THE SAMPLE.
STANDARDS:
MEDICAL RESPIRATOR TECHNICAL REQUIREMENTS, 5.5 SYNTHETIC BLOOD PENETRATION BARRIER PERFORMANCE
YY/T 0691-2008 INFECTIOUS PATHOGEN PROTECTION EQUIPMENT MEDICAL MASK RESISTANCE TO SYNTHETIC BLOOD PENETRABILITY TEST METHOD (FIXED VOLUME, HORIZONTAL INJECTION)
YY 0469-2011 MEDICAL SURGICAL MASK TECHNOLOGY REQUIRES A BLOOD PENETRATION TEST DEVICE
ISO 22609:2004 INFECTIOUS PATHOGEN PROTECTION EQUIPMENT MEDICAL MASK TEST METHOD FOR RESISTANCE TO SYNTHETIC BLOOD PENETRATION (FIXED VOLUME, HORIZONTAL INJECTION)
ASTM F1862-07 STANDARD TEST METHOD FOR RESISTANCE OF MEDICAL FACE MASKS TO BLOT BY SYNTHETIC BLOOD (HORIZONTAL PROJECTION OF FIXED VOLUME AT A KNOW VELOCITY)
TECHNICAL PARAMETERS:
1. INJECTION DISTANCE: 300mm ~ 305mm ADJUSTABLE
2. NOZZLE DIAMETER: 0.84mm
3. INJECTION SPEED: 450CM/S, 550CM/S, 635CM/S
4. WEIGHT: 35KG
5. POWER SOURCE: AC220V 50HZ
QUANTITY: 1
Learn More -
M-5287 PICANOL GAMMAX 6R RAPIER WEAVING MACHINES YEAR 2005 WIDTH 2200mm - DOBBYREFERENCE NUMBER: M-5287 (131326MNA12RC) L PICANOL GAMMAX 6R RAPIER WEAVING MACHINES YEAR 2005 WIDTH 2200mm - DOBBY PICANOL GAMMAX 6R RAPIER WEAVING MACHINES 2200mm YEAR OF MAKE 11/2005 QUANTITY AVAILABLE: 6 Learn More -
P-8696 ULTRASONIC SEWING MACHINELearn MoreREFERENCE NUMBER: P-8696
ULTRASONIC SEWING MACHINE
CAN BE USED WITH EITHER 20 KHz, 30 KHz OR 40 KHz EQUIPMENT
LED DISPLAY FOR EASY PROCESS MONITORING
19” (483mm) THROAT
INDEPENDENT CONTROLS FOR SLITTING AND ROTARY ANVIL WELDING
DUAL SEALING CAPABILITIES WITH INDEPENDENT ADJUSTMENTS
EDGE GUIDING, REWINDING, AND FEED ROLLS CAN BE USED
CAN BE OPERATOR CONTROLLED AS A BENCHTOP UNIT OR INTEGRATED INTO AN EXISTING LINE
QUANTITY: 1
-
J-1937 LAMINATING MACHINE FOR FOAM TO FABRIC – CONTINUOUS WITH SLITTING, NEWSILICON COATED NOMEX FELT (ITB BRAND – ITALIAN)
BLANKET THICKNESS: 8mm
PNEUMATICALLY ADJUSTABLE FELT PRESSURE
MAXIMUM WORKING WIDTH: 2100mm (82.6”)
EVA HOT MELT FILM, FILM ROLL MIMIMUM 500 METERS, MAXIMUM 1000 METERS
36 KW HEATER RESISTANCE
MAIN DRUM DIAMETER: 500mm
TEFLON COATED MAIN CYLINDER
PNEUMATIC BLANKET EDGE CONTROL BY PHOTOCELL
WORKING SPEED: 5 TO 10 METERS PER MINUTE, DEPENDING ON FABRIC THICKNESS (THICK FABRIC IS SLOWER, NORMAL FABRIC IS FASTER)
PLC CONTROLLER WITH TOUCH SCREEN OPERATOR PANEL
PROGRAMMABLE HEATING UP AND COOLING DOWN
ROLL TO ROLL WORKING SYSTEM
SLITTING UNIT WITH 3 PIECE PNEUMATIC CUTTER AND DUAL CENTER REWINDING UNIT (OPTIONAL)
440 V 3-PHASE, 60 Hz, 55 AMPLEAD TIME: 6 TO 8 WEEKS AFTER RECEIPT OF DEPOSIT
Learn More -
M-3674 SANTEX TENTER YEAR 1997-PIN CHAIN -6 ZONESREFERENCE NUMBER: M-3674 (880WUREXX7) L SANTEX TENTER YEAR 1997-PIN CHAIN -6 ZONES QUANTITY AVAILABLE: 1 Learn More
-
M-5249 DUSENBERY 815 DUPLEX SLITTER REWINDER 84” WITH DUSENBERY 863 SHAFT TYPE UNWIND STANDREFERENCE NUMBER: M-5249 (131342CBQ12U) L DUSENBERY 815 DUPLEX SLITTER REWINDER 84” WITH DUSENBERY 863 SHAFT TYPE UNWIND STAND QUANTITY AVAILABLE: 2 Learn More -
L-5934 MONFORTS 6-F TWIN AIR STENTER YEAR 2003 – WORKING WIDTH 2400mmREFERENCE NUMBER: L-5934
MONFORTS 6-F TWIN AIR STENTER YEAR 2003 – WORKING WIDTH 2400mm
STENTER
RAMA MONFORTS
MAKE: MONFORTS
MODEL: 6-F TWIN
YEAR: 2003
440 VAC 60HZ
NATURAL GAS
AIR COMPRESSOR 7 BAR
QUANTITY: 1
Learn More -
C-4181 TEMAFA/DILO/SPINNBAU/AUTEFA NEEDLING LINE, WORKING WIDTH 5300mm, YEAR 2000
REFERENCE NUMBER: C-4181
TEMAFA-DILO-SPINNBAU-AUTEFA NEEDLING LINE WORKING WIDTH 5300mm YEAR 2000NEEDLING LINE
YEAR: 2000
WORKING WIDTH: 5300mmCONSISTING OF:
ITEM 001
TEMAFA BALE OPENER
QUANTITY: 1ITEM 002
SPINNBAU SUPER SERVO CARD
WORKING WIDTH: 3000mm
QUANTITY: 1ITEM 003
AUTEFA TOPLINER CL 4004 CROSS-LAPPER
INPUT: 3000mm
OUTPUT: 6500mm
QUANTITY: 1ITEM 004
DI-LOOM OD-II 60 PRE-NEEDLE LOOM
WORKING WIDTH: 6000mm
QUANTITY: 1ITEM 005
DILO DI-LOOM OUG-II 60 FINISHING NEEDLE LOOM
WORKING WIDTH: 6000mm
QUANTITY: 1ITEM 006
DILO WSP 25/55 ACCUMULATOR
QUANTITY: 1ITEM 007
DILO CUTTING AND WINDING UNIT
QUANTITY: 1ITEM 008
TEMAFA EDGE TRIM OPENER
UP TO 960 KG/H
QUANTITY: 1QUANTITY: 1 LINE
Learn More -
C-3964 JAGENBERG CUTTING MACHINE, WIDTH 1800mm, YEAR 1973 TO 2006C-3964 JAGENBERG CUTTING MACHINE, WIDTH 1800mm, YEAR 1973 TO 2006
JAGENBERG CUTTING MACHINE
BRAND: JAGENBERG
YEAR: 1973 TO 2006
WIDTH: 1800mmQUANTITY: 1
Learn More