Search results for: 'Open+w'

C-3930 TEMAFA FINE OPENER, WIDTH 1400mm, YEAR 2005

TEMAFA FINE OPENER
BRAND: TEMAFA
YEAR: 2005
WIDTH: 1400mm

QUANTITY: 1

Learn More

C-3926 TRÜTZSCHLER FINE OPENER MTO OR FTO, WIDTH 1200mm

TRÜTZSCHLER FINE OPENER
BRAND: TRÜTZSCHLER
TYPE: MTO OR FTO
WIDTH: 1200mm

QUANTITY: 1

Learn More

M-6059 BEMATIC/MECCANICA THERMOBONDING PRODUCTION LINE, WIDTH 2700mm, YEAR 2012

OFFER 001
THERMOBONDING PRODUCTION LINE
YEAR: 2012
WORKING WIDTH: 2700mm

OFFER 002
BEMATIC BALE OPENER

OFFER 003
BEMATIC BALE OPENER FOR BICO FIBER

OFFER 004
BEMATIC WEIGHT CONTROL TOWER

OFFER 005
BEMATIC FINE OPENER

OFFER 006
BEMATIC FINE OPENER

OFFER 007
CF DOUBLE FILTER

OFFER 008
BEMABLOW OPENER

OFFER 009
T-MAX FORMER

OFFER 010
BEMAMULTISCALE

OFFER 011
CF DOUBLE FILTER

OFFER 012
SPRAY CABIN

OFFER 013
BOMBI MECCANICA OVEN

OFFER 014
CALANDER

OFFER 015
COOLING SECTION

OFFER 016
CUTTING SYSTEM

QUANTITY: 1 LINE

Learn More

M-6037 MACKIE/LAROCHE/STUMMER AIRLAY LINE, WORKING WIDTH 1000mm TO 2400mm, YEAR 2004 TO 2008

OFFER 001
AIRLAY LINE
MANUFACTURER: MACKIE, LAROCHE, STUMMER
YEAR: 2004 TO 2008
WORKING WIDTH: 2400mm

CONSISTS OF:
OFFER 002
MACKIE HOPPERS FOR FIBER FEEDING

OFFER 003
TOWER FEED

OFFER 004
BLENDING BIN FOAM PANEL

OFFER 005
LAROCHE FINE OPENER

OFFER 006
STUMMER VERTICAL OPENER

OFFER 007
STUMMER AIR BLENDER

OFFER 008
LAROCHE AIRLAY HEAD

OFFER 009
THERMOBONDING OVEN

OFFER 010
SLITTING SYSTEM WITH 5 BLADES

OFFER 011
CROSS CUT HIGH SPEED BLADE CUTTING SYSTEM

OFFER 012
BATT PACKER (FOR PACKING BATTS INTO BAGS)

OFFER 013
RECLAIM OPENER

QUANTITY: 1 LINE

Learn More

M-6060 BEMATIC T-MAX WEB FORMING LINE, WORKING WIDTH 1500mm TO 2600mm, YEAR 2014

OFFER 001
BEMATIC WEB FORMING LINE
MAKE: BEMATIC
YEAR: 2014
CAPACITY: 500 KG PER HOUR

OFFER 002
BALE OPENER
WORKING WIDTH: 2000mm

OFFER 003
PIN ROLL OPENER
WORKING WIDTH: 1800mm

OFFER 004
FINE OPENER
WORKING WIDTH: 1500mm

OFFER 005
BEMABLOW
WORKING WIDTH: 2500mm

OFFER 006
T-VALVE + FANS

OFFER 007
T-MAX FORMER
WORKING WIDTH: 2600mm

OFFER 008
BEMAMULTISCALE
WORKING WIDTH: 2600mm

OFFER 009
ELECTRICAL CONTROL PANEL AND OPERATOR CONTROL BOARD

OFFER 010
FILTER WITH FOUR BAGS

QUANTITY: 1 LINE

Learn More

M-6067 MACKIE/LAROCHE/STUMMER AIRLAY LINE, WIDTH 2400mm, YEAR 2004 TO 2008

OFFER 001
MACKIE, LAROCHE, STUMMER AIRLAY LINE
YEAR: 2004 TO 2008
WORKING WIDTH: 2400mm

OFFER 002
MACKIE HOPERS FOR FIBER FEEDING

OFFER 003
TOWER FEED
WORKING WIDTH: 1000mm

OFFER 004
BLENDING BIN FOAM PANEL
DIMENSIONS: 8000mm x 4000mm x 3500mm HEIGHT

OFFER 005
LAROCHE FINE OPENER
YEAR: 2004

OFFER 006
STUMMER VERTICAL OPENER
YEAR: 2008
WORKING WIDTH: 1200mm

OFFER 007
STUMMER AIR BLENDER
YEAR: 2008

OFFER 008
LAROCHE AIRLAY HEAD
YEAR: 2004
WORKING WIDTH: 2400mm

OFFER 009
THERMOBONDING OVEN

OFFER 010
BURNER

OFFER 011
COOLING SECTION WITH TOP AND BOTTOM

OFFER 012
SLITTING SYSTEM

OFFER 013
CROSS CUT HIGH SPEED BLADE CUTTING SYSTEM

OFFER 014
BATT PACKER (FOR PACKING BATTS INTO BAGS)

OFFER 015
RECLAIM OPENER

QUANTITY: 1 LINE

Learn More

M-5641 NEEDLE PUNCHING PRODUCTION LINE, WIDTH 5000mm, YEAR 1984 TO 1994

OFFER 001
NEEDLE PUNCHING PRODUCTION LINE

OFFER 002
ROLANO BALE OPENER

OFFER 003
FOR CARDING MACHINE

OFFER 004
THICKNESS CONTROL

OFFER 005
FOR CROSSLAPPER

OFFER 006
FEHRER NEEDLE LOOM

OFFER 007
MENZEL WINDER

OFFER 008
LAROCHE FLEECE OPENER

QUANTITY: 1

Learn More

M-6058 BEMATIC/TEXNOLOGY/MECCANICA THERMOBONDING PRODUCTION LINE, WIDTH 2500mm, YEAR 2012

OFFER 001
THERMOBONDING PRODUCTION LINE
YEAR: 2012
WORKING WIDTH: 2500mm

OFFER 002
BEMATIC BALE OPENER

OFFER 003
BEMATIC OPENER / MIXER

OFFER 004
BEMATIC FEEDER

OFFER 005
BEMATIC CARDING
WORKING WIDTH: 2500mm

OFFER 006
TEXNOLOGY CROSSLAPPER

OFFER 007
BOMBI MECCANICA OVEN

OFFER 008
BOMBI MECCANICA LONGITUDINAL AND CROSSCUTTING

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: T-6843 SPINNBAU NONWOVEN LINE, YEAR 1994 BRAND: SPINNBAU SHORT DESCRIPTION: NONWOVEN LINE YEAR: 1994 NONWOVEN LINE CONSISTING OF 1. CARD FEEDING: CARD FEEDING R&S, NEW, IN 2500mm WORKING WIDTH, CONSISTING OF: ONE R&S MATERIAL BIN IN 2500mm WORKING WIDTH, 600mm DEPTH AND A COMPLETE HEIGHT OF 2500mm, WITH TOP AND BOTTOM WINDOW AT BOTH SIDES, FILLING LEVEL CONTROLLED BY IN HEIGHT ADJUSTABLE INFRARED DEVICES. ONE DOOR AT THE BACKSIDE FOR CLEANING, LOCKED BY SECURITY SWITCHES. THE VITIATED AIR ESCAPES THROUGH THE PERFORATED SHEETMETAL AT THE TOP. THESE AREAS ARE COMPLETELY COVERED, THE OUTGOING AIR CAN BE FILTERED BY AN EXCISTING FILTERSTATION OR OPTIONALLY BY FILTERBAGS, 2 DELIVERY ROLLERS. ONE R & S CHUTE FEEDER IN 2500mm WORKING WIDTH CONSISTING OF: ONE OPENING ROLLER DIAMETER 450mm, ONE VIBRATION CHUTE, FIBRELEVEL CONTROLLED BY ULTRASONIC, CHUTE ADJUSTABLE OVER TOOTH RAILS IN DEPTH FROM 80 TO 240mm, TWO DRAWING OFF ROLLERS, ONE FEEDING TABLE WITH TRANSILON BELT, PREPARED FOR SERVOLAP. DRIVES: DELIVERY ROLLERS: AC -GEARBOXMOTOR 0.55 KW, FC OPENING ROLLER: AC-MOTOR 2.2 KW VIBRATION: AC-GEARBOXMOTOR, 0.55 KW, FC FEEDING TABLE: AC-GEARBOXMOTOR, 0.55 KW, FC 2. CARDING; ONE SPINNBAU DOUBLE DOFFER CARD, IN 2500mm WORKING WIDTH, YEAR 1994: CARD, FOLLOWING EQUIPPED: 1 CYLINDER FEEDING DEVICE WITH FEED PLATE: 1 FEED ROLLER DIAMETER 159mm 1 LICKER-IN DIAMETER 292mm PRE-OPENING: 1 BREAST DIAMETER 412mm 1/1 WORKER/STRIPPER DIAMETER 213/118mm 1 INTERMETE ROLLER DIAMETER 412mm CARD: 1 MAIN CYLINDER DIAMETER 1500mm 5/5 WORKERS/STRIPPERS DIAMETER 213/118mm 1 DOFFER, TOP DIAMETER 550mm 1 DOFFER, BOTTOM DIAMETER 550mm 2 CONDENSING ROLLERS TOP DIAMETER 292mm TOP DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. BOTTOM DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. DRAWING OFF TABLES: TOP TRANSILON BELT BOTTOM: TRANSILON BELT COVERS: THE CARD HAS COVERS TO CLAP UP AND DOWN (SECURED WHEN CLAPPED UP), THE SIDES ARE FULLY COVERED AND ELECTRONICALLY LOCKED. RIGID WIRE: ONE COMPLETE SET OF RIGID WIRE, MOUNTED, FOR FIBRES 1.5 DTEX - 17 DTEX, CAPACITY UP TO 800 KG/H ELECTRIC: VOLTAGE: ~400 V AC, 3 PHASES CONTROL VOLTAGE: ~220 V AC, =24V DC FREQUENCY: 50 Hz COLOUR: MACHINE: RAL 5015/ 9001 (IF YOU LIKE WE CAN CHANGE) CONTROL CABINET: RAL 7032, GREY SWITCH BOARD: RAL 7032, GREY ELECTRICAL DRIVES: FEED ROLLER: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED LICKER-IN: MECHANICAL FROM BREAST BREAST: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED WORKERS BREAST: MECHANICALLY FROM BREAST INTERMEDIATE ROLLER: MECHANICALLY FROM MAINSWIFT MAIN SWIFT: 1 AC-MOTOR FREQUENCY CONTROLLED WORKERS: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED DOFFERS: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED CONDENSING ROLLERS: 1 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF DEVICES: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF TABLES: 2 AC GEARBOXMOTORS, FREQUENCY CONTROLLED SWITCHBOARDS AND CONTROLS: SWITCHBOARDS RITTAL SERIES, COMPLETE WIRED. SWITCHBOARDS WITHOUT COOLING DEVICES. CONTROL CABINET OPERATION WITH COLOURED SCREEN, FITTED IN CONTROL CABINET OPERATED BY SIEMENS SPS S7-300 1 SET OF CABLE MATERIAL: FOR 20 MTR LENGTH BETWEEN MACHINERY AND SWITCHBOARD WITHOUT INSTALLATION MATERIAL ERECTION AND STARTING UP: IS NOT INCLUDED, SHOULD BE MADE BY US FOUNDATION: ONE FOUNDATION IN 750mm HEIGHT, WITH SIDEWALKS AROUND, TWO STEPS ON EACH SIDE. SUCTION: CONNECTION FOR THE DOFFER AND TOP OF CARD 3. CROSSLAPPING, NEW: ONE REISKY & SCHLESE CROSSLAPPER, TYPE RS 100 IN 2500mm WORKING WIDTH (BELT WIDTH 2800mm) AND 2500mm LAPPING WIDTH (BELT WIDTH 2700mm) MAX INFEEDING SPEED: 100 MTR/MIN, DELIVERY SPEED OF DRAWING OFF TABLE: FROM 0 TO 20 MTR/MIN, CONSISTING OF: ONE FEEDING TABLE IN 1000mm LENGTH MOUNTED IN IT'S OWN FRAME, ADJUSTABLE IN THE HEIGHT ACCORDING TO THE DOFFER, FURTHER THE COMPLETE FEEDING TABLE CAN BE MOVED UP IF THE DOFFER HAS TO BE DRAWN BACK. THE CROSSLAPPER ITSELF GUIDES THE WEB FROM THE INFEED DOWN TO THE OUTLET BETWEEN THE CONVEYORS, WHICH HAVE ANTISTATIC PROPERTIES. THE TENSION AND THE DISTANCES BETWEEN THEM CAN BE ADJUSTED ACCORDING TO THE DIFFERENT FIBRES. THE CONVEYORS ARE EQUIPPED WITH AUTOMATIC EDGE GUIDES, SO THAT THEY ARE RUNNING IN THE CENTRE. THE LAID WEB IS COVERED BY THEM. THE SERVO- DRIVES ARE RESPONSIBLE FOR THE PERFECT SYNCHRONISATION AND THE EXACT REVERSAL OF THE CARRIERS. THE SWITCHBOARD IS EQUIPPED WITH A COULOURED TOUCHSCREEEN, WHERE ALL NECESSARY PARAMETERS CAN BE PROGRAMMED, ALSO DIFFERENT CURVES FOR STORING THE WEB DURING REVERSALS. DRIVES: FEED TABLE: AC-SERVO-MOTOR BELT 1: AC-SERVO-MOTOR BELT 2: AC-SERVO-MOTOR TOP CARRIER: AC-SERVO-MOTOR BOTTOM CARRIER: AC-SERVO-MOTOR DRAWING OFF TABLE: AC-SERVO-MOTOR HEIGHT DRAWING OFF TABLE LEFT: AC-LINEARMOTOR HEIGHT DRAWING OFF TABLE RIGHT: AC-LINEARMOTOR OPERATION: BY COLOURED TOUCHSCREEN, SIEMENS IN CONTROL CABINET OF CARD. PARAMETERS: MANUEL / INLINE INFEED SPEED DRAFT (INFEED SPEED/LAYING SPEED) NUMBER OF LAPS LAPPING WIDTH FROM MIDDLE TO THE LEFT AND TO THE RIGHT DRAWING OFF SPEED AUTOMATICALLY SHOWN DEPENDING ON LAYERS DARWING OFF TABLE HEIGHT LEFT / RIGHT LAYING SPEED RECEIPES FAULT SHOWING SWITCHBOARD AND ELECTRONIC DEVICES: SWITCH BOAD RITTAL, COMPLETE WIRED. SWITCHBOARD WITHOUT COOLING DEVICE. CONTROL PANNEL RITTAL. CONTROLLED BY S7 SIEMENS 10000mm OF CABLES BETWEEN SWITHBOARD AND MACHINE/CONTROLPANEL QUANTITY: 1 Learn More

C-3496

DORNIER LOOMS PTS 8J, WORKING WIDTH 3400mm, YEAR 2006 TO 2007, JACQUARD

Learn More