Search results for: 'Spare par'

CYLINDER DIAMETER: 5”
NO. OF FEEDERS: 10
130 NEEDLES

GOLDEN ROC NEEDLE
DIAL 43.50 NEEDLE 2 TYPES
CYLINDER 122.48
NEEDLE 2 TYPES
NEEDLE DETECTOR: 6 PCS
DIGITAL CONTROL PANEL
CAM: 1 SET (MADE OF ALLOY STEEL, JAPAN)
CYLINDER 2 TRACKS, DIAL 2 TRACKS
TOTAL CAMS: 40 PCS
PNEUMATIC OIL LUBRICATOR
SMG POSITIVE STORAGE FEEDER
YARN FEEDING TOOTHED BELT
CYLINDER (MADE OF ALLOY STEEL, JAPAN)
INVERTER
LYCRA FEEDER
MOTOR
CREEL HOLDERS
FABRIC ROLLING MACHINE

SPARE PARTS:
CAM × 1 PC/TYPE
TOOLBOX (WITH TOOLS INSIDE) × 1 PC
NEEDLE DETECTOR × 2 PCS
NEEDLE × 100 PCS
YARN CARRIER × 2 PCS
POSITIVE STORAGE FEEDER × 2 PCS

SHIPPING DIMENSIONS (WOODEN CASE): LENGTH 1600mm, WIDTH 1100mm, HEIGHT 2200mm 3.87 CBM
GROSS WEIGHT: 550 KGS

QUANTITY: 1

TILE FACTORY DESIGNED BY SACMI / ITALY
YEAR ESTABLISHED 2014 TO 2016
THIS PLANT IS AN ENVIRONMENTALLY FRIENDLY ENTERPRISE, WHEN IT RECYCLES 100% OF ITS EFFLUENTS AND PERFORMS HEAT RECOVERY, THEREBY SAVING ENERGY

See all pictures:
https://www.flickr.com/photos/183869481@N08/albums/72157710649767958

THE PLANT:
COVERS AN AREA OF 22 THOUSAND SQUARE METERS
THE PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
CERAMIC FLOOR TILES
CERAMIC WALL TILES
BMR POLISHING LINE
BMR SQUARING & CHANFERING LINE
THE MAIN RAW MATERIALS ARE CLAY (DB-4) - 31 %, ALBITE (STD5) - 60 %
NEPHAIIN (PN9595) - 2.5 %, KAOLIN (RHB1) - 6.5 %
ON TOP OF IT THEY ARE USING GLAZE MATERIALS AND PAINTS
•FROM THE MOMENT THE MATERIAL IS PREPARED IT IS BEING DRIED PRESSED ON ONE OF FOUR (4) PRODUCTION LINES.
•TWO (2) LINES ARE WITH SACMI PRESSES OF PH 7,500 TON EACH AND HORIZONTAL DRYERS SACMI
•TWO LINES ARE WITH SACMI PRESSES OF PH 3,590 TON EACH AND VERTICAL DRYERS SACMI
•ALL FOUR (4) LINES HAVE THEIR OWN DIGITAL PRINTING MACHINE INCORPORATED
•ALL PRODUCTS ARE BEING GLAZED AND FIRED ON 1200 DEGREES IN ONE OF THE TWO (2) KILNS, SACMI
FOUR (4) SORTING, PACKING AND PALLETIZING LINES
GLAZE PREPARATION LINE
COMPLETE INSTALLATION FOR SMALL PRODUCTION CAPACITIES
COMPLETE FOILING LINE
COMPLETE ELECTRIC INSTALLATION
POWER GENERATOR UNIT
COMPRESSED AIR INSTALLATION

MACHINES ARE MADE BY:
SACMI: ITALY
NUOVA ERA / ROBOBOX: ITALY
BMR: ITALY
IN.TE.SA: ITALY
CUCCOLINI: ITALY
SYSTEM CERAMICS: ITALY
TGMAC SR.L: ITALY
DURST: GERMANY
ROTOCOLOR MAG: ITALY
NUOVA FIMA: ITALY
OMS: ITALY
MARPAK OMS: ITALY
MESSERSI PACK: ITALY

TILE SIZES
THE FACTORY MANUFACTURES TILES OF VARIOUS SIZES FROM 300 X 300 TO 1200 X 1200mm IN VARIOUS TEXTURES AND DESIGNS USING DIGITAL PRINTING MACHINES
PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
THE FACTORY IS FULLY AUTOMATED AND USING ADVANCED CONTROL SYSTEMS!

HUGE AMOUNT OF ORIGINAL SPARE PARTS AVAILABLE WITH THIS PLANT
THIS PLANT IS AVAILABLE WITH THE COMPLETE ELECTRIC, AIR, GAS, RECYCLING INSTALLATION

THIS PLANT CAN BE SOLD: WITH 4 LINES OR 2 AND 2 LINES

EACH LINE WITH
PRE-GRINDER
DENSIFIER, MODEL HV70
REGRINDING
COOLING
DOFFING

THERE IS A PULVERIZER AT THE END OF ONE OF THE LINES THAT IS AVAILABLE

HERBOLD RECENTLY INSPECTED AND INFORMED ALL BIG COMPONENTS ARE IN GOOD CONDITION, SOME SMALLER SPARE PARTS ARE ADVISED

QUANTITY: 2 LINES

COMPLETE ZIMMER CHROMOJET LINE, WIDTH 4000mm, YEAR 2000

WIDTH: 4000mm

YEAR: 2000

DPI: 1.666mm = 16 DOTS PER INCH (DPI)

2560 JETS

EACH PUMP WITH 256 JETS (10 PUMPS TOTAL)

JETS ARE IN GOOD CONDITION, TO PRINT ALL KINDS OF CARPETS OF ANY WEIGHT OR PILE HEIGHT 

CAN PRINT DOT OR HALF DOT

10 COLORS

COULD BE USED ALSO FOR BLANKETS

REFERENCE NUMBER: P-4005 
ZELL 
MODEL: PROCOMAT 
YEAR: 1986 
ENTRY WIDTH: 2270mm 
QUANTITY: 1 

REFERENCE NUMBER: L-1322
MACHINE EXTERNAL SIZE: L7900 X W7000 X H2400mm
QUANTITY: 1

REFERENCE NUMBER: R-6814 

LIROPOL TOWEL KNITTING MACHINES, RIUS WARPER, CREELS

(2) X LIROPOL TOWEL KNITTING MACHINES – RUNNING,

MODEL 114133 – YEAR 1994

MACHINE WIDTH 2500mm

GAUGE 12  (NEEDLES PER INCH) 

(1) X RIUS WARPER MODEL A-3 30/30

(1) X CREEL WITH STOP MOTION 260 POSITIONS – FOR COTTON

(1) X CREEL FOR WARPER 260 POSITIONS, FOR POLYESTER YARN, WITH HYDRAULIC TENSION CONTROL

(60) X ALUMINUM WARP BEAMS FOR COTTON 21 x 30

(30) X WARP BEAMS, 21 x 21 FOR POLYESTER

(1) X MOTORIZED PLATFORM FOR RIUS WARPER

P-2964 SCHLAFHORST SYSTEM 238 GKW DX-P AUTOMATIC WINDER YEAR 1996 20 HEADS

SCHLAFHORST
TYPE: SYSTEM 238 GKW DX-P
AUTOMATIC WINDER
YEAR: 1996
20 HEADS
SPLICER PER SPINDLE
6 INCHES TRAVERSE CYLINDRICAL WITH 2 SYMMETRICAL DRUMS
WAXING DEVICE
“LOEPFE” YARN MASTER CLEARERS FR700, TYPE TK760
AUTOSPEED
1 DOFFER + DEVICE TO AVOID WARP YARNS
“LUWA” BLOWER/SUCTION
SPARE PARTS TOGETHER WITH THIS MACHINE:
7 COMPLETE HEADS
1 SUCTION BOX
1 PALLET WITH ASSORTED SPARE PARTS
20/30 ELECTRONIC PLATES

QUANTITY: 1

REFERENCE NUMBER: K-4373

PICANOL PRESIDENT SHUTTLE LOOMS -72 AND 55 INCH

(12) LOOMS 72” (1830mm) WITH STAUBLI

(4) LOOMS ARE 55” (1397mm) WITH STAUBLI

(1) LOOM 72” (1830mm) WITH CAM

13 LOOMS ARE 1973 MODEL CM-C/P PRESIDENT 72 INCHES

4 LOOMS ARE 1975 MODEL CN-C/P PRESIDENT 54 INCHES

AUTOMATIC WEFT RETURN

NO AUTOMATIC WEFT STOPMOTION

AUTOMATIC WARP STOP MOTIONS

REINFORCED FOR HEAVY CANVAS WEAVING

AT SEPARATE PRICE THERE IS A LARGE LOT OF SPARE PARTS

ACCESSORIES:

1 WARP BEAM AND CLOTH ROLL

3 SHUTTLES

4 HARNESSES

DROPPERS

LET-OFF AND TAKE-UP: ELECTRICAL

SPEED: 180 RPM

POWER CONSUMPTION: 220 V.

AUTO BOBBIN CHANGE IS OPERATIONAL

WEFT BREAK DETECTION IS OPERATIONAL

LOOM'S BACK REST REINFORCED HAS A SPECIAL CYLINDER AT THE BACK FOR HEAVY DUTY MATERIAL

WARP STOP MOTION IS OPERATIONAL

QUANTITY: 17

C-3298 PICANOL RAPIER LOOM GAMMA 8 R, WIDTH 2200mm, YEAR 2002, DOBBY, 8 COLORS

QUANTITY: 2