Search results for: 'Com''

P-3408 OSTHOFF ST80 SINGEING MACHINE YEAR 1990 WIDTH 1800mm

OSTHOFF
MADE: GERMANY
TYPE: ST80
SINGEING MACHINE
YEAR: 1990 (COMPLETELY OVERHAULED IN 2001)
WORKING WIDTH: 1800mm
ROLLER WIDTH: 2000mm

CONSISTED OF FOLLOWING PARTS:
BEATING AND BRUSHING UNITS FOR FILTER
FEED KF10
SINGEING UNITS WITH 2 BURNERS
BEATING AND BRUSHING UNIT TYPE V899 (YEAR 2001)
DESIZING THROUGH WITH 5 m CAPAPCITY
SQUEEZER MENZEL
BIG BATCHER

QUANTITY: 1 SET

M-1947 OSTHOFF SINGEING MACHINE MODEL VP99 (6413) YEAR 2005 WIDTH 2100mm

OSTHOFF SINGEING MACHINE
MODEL VP99 (6413)
YEAR 2005
WIDTH 2100mm
NATURAL GAS HEATING
GAS PRESSURE 0,3 – 3 BAR
GAS CONSUMPTION 20 М³/HOUR
COLD WATER CONSUMPTION 2,2
M³/HOUR ± 10%
INSTALLED POWER 23 KW
FABRIC INTRODUCTION
SYSTEM WITH ACCUMULATOR FOR ROLLS CHANGING WITHOUT INTERRUPTION OF WORKING
CLEANING SYSTEM WITH DUST DETECTOR
DOUBLE RAMP
DOUBLE BRUSHING GROUP
2- BENNINGER EXTRACTA CLOSED WASHING DEVICE FOR FABRIC IMPREGNATION WITH A SOLUTION FOR THE NEXT DESIZING
EXIT ON THE ROLL
AUTOMATIC SYSTEM FOR PROCESS COMMAND
SPEED: 10 TO 100 M/MIN

QUANTITY: 1

A-1790 TECTEX CROSS LAPPER, 2.5 METER x 4.0 METER

BRAND: TECTEX
SPEED: 50 METER PER MINUTE
COMPLETE OVERHAULED BY COMPANY BEMATIC
WITH NEW CABLES AN NEW CONTROL OPERATOR PANEL BEMATIC

QUANTITY: 1

K-2582 SIEMENS COAL AND BIOMASS POWER PLANT 2.5MW YEAR 2002

WAS BUILT TO SUPPLY THE PAPER MILL WITH STEAM AND ELECTRICITY

MAKE: SIEMENS
MODEL: CFR5 G6a
2.5MW
65 BAR
480 ˚ C
REVOLUTION NUMBER: 23000 U PER MINUTE
EVAPORATION PRESSURE: 1-10 BAR
YEAR 2002
THE STEAM TUBINE AND THE GENERATOR WERE CHANGES AND ARE NEW
HOURS: LESS THAN 30,000
BOILER SYSTEM WAS COMPLETELY RECONDITIONED
THE WATER TREATMENT PLANT WAS RECONDITIONED
EXHAUST CLEANING SYSTEM WAS RECONDITIONED
ASH AND COAL TRANSPORTATION SYSTEMS WERE RECONDITIONED

QUANTITY: 1

K-2547 GAS TURBINE POWER PLANT 5.2MW YEAR 1989

SOLAR TAURUS 6- SOLO NOx
5.2MW
YEAR 1989- GAS TURBINE RECONDITIONED IN 2010
STEAM BOILER
25 T/H/ 16-25 BAR AND GAS COMPRESSORS
NATURAL GAS
50 HZ

QUANTITY: 1

P-4856 MAGEBA SFX 12/35-JJ NARROW FABRIC LOOM YEAR 2001 JACQUARD

MAGEBA
MODEL: SFX 12/35-JJ
NARROW FABRIC NEEDLE LOOM
YEAR: 2001

QUANTITY: 1

P-4879 KRANTZ STENTER YEAR 1989 WIDTH 2200mm 5 CHAMBERS

KRANTZ
STENTER
YEAR: 1989 (COMPLETELY REFURBISHED 2006)
WORKING WIDTH: 2200mm
ENTRY FROM TROLLEY OR A-FRAME
BIANCO INFEED UNIT, YEAR 2006

QUANTITY: 1

K-9319 CRABTREE GRIPPER AXMINSTER IVAX CARPET LOOMS YEAR 1998 TO 1999

IVAX LOOMS
CRABTREE GRIPPER AXMINSTER CARPET LOOMS
YEAR: 1998 TO 1999
THEY HAVE 11 COLOR COMPUTERIZED ELECTRONIC JACQUARDS

QUANTITY: 2

REFERENCE NUMBER: P-3884

JLGMANLIFT G10-55A YEAR 2011

JLGMANLIFT

MODEL: G10-55A

YEAR: 2011

POWER MANU: CUMMINS

FUEL TYPE: TURBO DIESEL

HOURS: 2601

CAPACITY (LBS): 10,000

BOOM LENGTH (ft): 55

CARRIAGE WIDTH: 72 INCHES

FORKS: 60 INCHES PALLET

TIRES: FOAM FILLED

OUTRIGGERS: YES

COMMENTS: 4WD

QUANTITY: 1

EMAIL US FOR PRICE & PICTURES

INCLUDE OUR REFERENCE NUMBER

REFERENCE NUMBER: K-8416

G1 TONELLO 330 "CENTRIFUGING" INDUSTRIAL WASHING MACHINE-USED

G1 TONELLO 330

“CENTRIFUGING” INDUSTRIAL WASHING MACHINE

FRONTAL TYPE

FOR CHEMICAL “STONE WASH”

CAPACITY LIT. 3.300

MOD. TONELLO G1 330

GENERAL DESCRIPTION:

TONELLO G1 IS A MACHINE WITH HIGH-SPEED HYDRO-EXTRACTION (600 R.P.M.) AND IT IS EQUIPPED WITH AUTOMATIC SELF-BALANCING SYSTEM

TONELLO G1 IS SUPPLIED WITH “SETTABLE INVERTER”

ROTATION SPEED FROM 0 TO 55 R.P.M

ALSO SETTING THE CENTRIFUGING SPEED FROM 0 TO 600 R.P.M.

WITH TIME OF CENTRIFUGE PROGRAMMABLE BY INDUSTRIAL PC

THE ACCESS MAIN DOOR TO THE DRUM IS VERY WIDE, IN ORDER TO EASY GARMENTS LOADING AND UNLOADING OPERATION

OPENING AND CLOSING ARE PNEUMATIC

DOUBLE TILTING SYSTEM FOR GARMENTS LOADING AND UNLOADING

DRIVING SYSTEM IS SITUATED ON THE UPPER PART OF THE MACHINE

WITH PROPER MATERIAL AND MOTORS SUITABLE TO WORK AT LOW AND HIGH R.P.M.

1 TANK FOR THE PREPARATION OF AUXILIARY PRODUCTS WITH CAPACITY OF LITTERS 180 EQUIPPED WITH ELECTRO-PUMP AND PNEUMATIC VALVES FOR THE SENT ONE

THE DRAINAGE IN DRAIN AND AUTOMATIC RINSES N° 2 WATER INLETS COMPLETE WITH PNEUMATIC VALVE- MECHANICAL WATER-COUNTER DIRECT HEATING AND COOLING SYSTEM

AUTOMATION WITH MICROPROCESSOR

TECHNICAL DATA TONELLO G1 330

DRUM DIMESION                           

-DRUM HOLING SHEET                                   mm                        4

THICKNESS         

-DIAMETER                                                   MM                       1900

-DEPTH                                                        MM                       1150

-VOLUME                                                      LT.                       3300

-DOOR DIAMETER                                           MM                       1020

-MAXIMUM LOADING                                        KG.                      120/130

CAPACITY           

BASKET SPIN SPEED                                        RPM                      0-600

DIRECT STEAM CONNECTION                               Ø                        1" 1/4

WATER INLET CONNECTION                                 Ø                        2 x 2

COMPRESSED AIR INLET                                     Ø                        1/4"

CONNECTION   

STEAM IN MAXIMUM PRESSUREBAR                      BAR                       6

WATER IN MAXIMUM PRESSURE                           BAR                       4

COMPRESSED AIR IN MAXIMUM                           BAR                       8

PRESSURE          

POWER INSTALLED                                           KW                        22

3-PHASE VOLTAGE                                           VOLT/HZ                 400/50

PRODUCTS TANK Ø 240 H 400                             LT.                         80

TANK RINSING VALVE                                         Ø                         1/2"

MACHINE SIZE                  

-WIDTH                                                          MM                        2500

-WIDTH WITH ELECTRICAL PANEL                         MM                        2980

-DEPTH                                                           MM                        2710

-HEIGHT                                                          MM                        3000