Search results for: 'a-2)','.)).)('

REFERENCE NUMBER: J-0043 (131365FDM12R) AUTOMATEX CROSSLAPPER YEAR 1997 MAKE: AUTOMATEX MODEL: FA 2000 TC YEAR: 1997 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5157 (1212PTKRXX11) L

ETON SYSTEMS YEAR 1988

 

ETON 2001

YEAR OF MANUFACUTRE: AROUND 1988

ABOUT 70 STATIONS, MAYBE MORE

TWO SEPARATE LINES, EACH AROUND 50 METERS LONG

TWO LINES ARE ASSEMBLED AND WORKING

LOTS OF SPARE PARTS FROM DISMANTLED ETONS SYSTEMS AND LOTS OF HANGERS

 

LINE 1

LINE 2

 

QUANTITY AVAILABLE: 2

Learn More

REFERENCE NUMBER: T-6855 AUTEFA, DILO, SPINNBAU COMPLETE NONWOVEN LINE BRAND: AUTEFA, DILO, SPINNBAU SHORT DESCRIPTION: COMPLETE NONWOVEN LINE ITEM 001 SINGLE DOFFER CARD BY “BESSI” - ITALY YEAR 1966 - WORKING WIDTH 2500mm - HOPPER-FEEDER WITH SCALE (WEIGHPAN) AND TOP SILO - INLET UNIT WITH ROLLERS - BREAST UNIT DIAMETER 1500mm WITH 3 PAIRS WORKERS/ STRIPPER (ORIGINALLY EQUIPPED WITH 5 PAIRS, UNUSED 2 PAIRS STILL AVAILABLE) - FANCY ROLL - TRANSPORT ROLL DIAMETER 1200mm - SWIFT DIAMETER 1500mm WITH 3 PAIRS WORKERS/ STRIPPER (ORIGINALLY EQUIPPED WITH 5 PAIRS, UNUSED 2 PAIRS STILL AVAILABLE) - DOFFER DIAMETER 1500mm WITH FLY-COMB - FLEXIBLE AND RIGID METALLIC WIRES IN EXCELLENT CONDITIONS QUANTITY: 1 ITEM 002 CROSS-LAPPER BY “MAK-AUTEFA” - GERMANY MODEL 101-42 YEAR 1965 - INLET WORKING WIDTH 2500mm - EXIT WORKING WIDTH 3000mm QUANTITY: 1 ITEM 003 PRE-NEEDLER BY “DILO” - GERMANY MODEL NFZ 3000 YEAR 1967 - WORKING WIDTH 3000mm - 2 NEEDLE BOARDS WITH TOTALLY 3000 NEEDLES / LIN MT - WITH BATT INLET UNIT QUANTITY: 1 ITEM 004 FINISH NEEDLERS BY “DILO” MODEL OD II 25 YEAR 1979 EACH - WORKING WIDTH 2500mm EACH - EACH ONE WITH 2 NEEDLE BOARDS WITH TOTALLY 5000 NEEDLES / LIN MT QUANTITY: 2 ITEM 005 TRANSVERSAL CUTTER BY “SPINNBAU-AUTEFA” - GERMANY. YEAR 1973 - WORKING WIDTH 2500mm QUANTITY: 1 ITEM 006 LONGITUDINAL CUTTER ITALIAN MAKE + ROLL WINDER ITALIAN MAKE ON ELECTRONIC WEIGHTING CELLS. WORKING WIDTH 2500mm QUANTITY: 1 ITEM 007 ROLLS LIFTING CRANE QUANTITY: 1 ALL ELECTRIC MOTORS AND CONTROL PANELS 400 V / 50 Hz Learn More

EFFECTIVE WIDTH: 1600mm
DAILY OUTPUT: 10,000 KGS PER DAY
WEIGHT RANGE: 10 TO 150 GSM
FILAMENT DIAMETER: 1.6 TO 2.0 DENIER
SPEED: 350 TO 400 METERS PER MINUTE
RAW MATERIAL: POLYPROPYLENE (PP)
DIMENSIONS: 35,000 X 15,000 X 11,000mm
VOLTAGE: 380 VOLTS, 3 PHASE

CONSISTING OF:

SPUNBOND EQUIPMENT

PP VACUUM SUCTION MACHINE (2)
7800 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS PER HOUR
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
ACCURACY: 0.01%

EXTRUDER (2)
DIAMETER: 130mm
SINGLE SCREW (2)
HEATING SYSTEM: ELECTRICITY
MOTOR: 75 KW

MELT FILTRATION MACHINE (2)
PIPE SIZE: 50mm
FILTER AREA: 3.5 SQUARE METERS
MELT FLOW: 650 KGS PER HOUR
DOUBLE FILTRATION CHAMBER

MELTING PUMP (2)
40 RPM
FLOW CAPACITY: 400 KGS PER HOUR
POWER: 7.5 KW

SPINNING BEAM (2)
DIMENSIONS: 1900 X 256mm
HANGER TYPE MELT DISTRIBUTION
HEATING SYSTEM: OIL
WORKING TEMPERATURE: 200 TO 260 CELSIUS

SPINNERET (4)
HARDNESS: 30
SIZE: 1900mm LONG X 256mm WIDE
HOLE DIAMETER 0.45mm
HOLE QUANTITY: 6500 HOLE PER METER

QUENCHING UNIT (2)
WORKING TEMP: 20 CELSIUS
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
AIR PRESSURE: 6500
FILTER SIZE: 80#

FILAMENT DRAFT UNITS (2)
AIR PRESSURE: 5020PA
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
INSIDE TEMP: 10 TO 25 CELSIUS
FILAMENT FINENESS: 1.6 TO 2.0 DENIER

MELT BLOWN EQUIPMENT

VACUUM SUCTION MACHINE (2)
LOAD CAPACITY: 700 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS/H
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
4 HOPPERS
200 KGS HOPPER LOAD

EXTRUDER
DIAMETER: 105mm
SINGLE SCREW
MOTOR: 18.5 KW

MELT FILTER
DOUBLE CYLINDER
HYDRAULIC
MELT FLOW CAPACITY: 450 KGS/HR
FILTER SIZE: 150mm DIAMETER
ELECTRIC HEATING

MELTING PUMP
SPEED: 40 RPM
MELT FLOW CAPACITY: 450 KGS PER HOUR
POWER: 7.5 KW

MELT BLOWN DIE SPINNARET
SPINNERET HOLE SIZE: 0.32 TO 0.35mm
HOLE DISTANCE: 40 TO 42 PER INCH
FABRIC WEIGHT: 2 TO 200 GSM

HIGH PRESSURE AIR BLOWER
AIR FLOW CAPACITY: 70 TO 100 CUBIC METERS PER MINUTE
AIR PRESSURE: 100 KPA
POWER: 200 KW

WEB FORMING MACHINE
SPEED: 100 METERS PER MINUTE

ELECTRIC TREATMENT
VOLTAGE: 220 VOLTS, 50 Hz
INPUT CURRENT: 3A
OUTPUT VOLTAGE: 60 KV
TREAT WEB WIDTH: 1.6 METERS

HOT AIR HEATING MACHINE
WORKING TEMP: 350 CELSIUS
PRESSURE: 0.8 KPA
HEATING: ELECTRIC
POWER: 200 KW

THERMAL CALENDER
PROCESSING SPEED: 400 METERS PER MINUTE
ROLLER SIZE: 2000mm LONG, 520mm DIAMETER
EMBOSSING ROLLER: 1
LINEAR PRESSURE: 30 TO 125 N/mm
HEATING SYSTEM: OIL

HYDROPHILIC MACHINE
SPEED: 400 METERS PER MINUTE
FEEDING SYSTEM: DOUBLE KISSING ROLLER
KISS ROLLER DIAMETER: 215mm
LIQUID TANK: 200 KGS WITH HEAT/WARM AND MIX

DRYING SYSTEM:
INFRARED + HOT AIR
DRIVE ROLL SIZE: 150mm
HEATING EQUIPMENT: QUARTZ HEATER, HOT AIR BLOWER, EXHAUST AIR BLOWER

INSPECTION MACHINE
EFFECTIVE WIDTH: 1600mm
INSPECTION SPEED: 400 METERS PER MINUTE
INSPECT GSM: 10 TO 40 GSM

AUTOMATIC WINDING MACHINE
SPEED: 400 METERS PER MINUTE
ROLLER DIAMETER: 2000mm
ROLLER EXCHANGE SYSTEM: AUTOMATIC
FABRIC INSPECTOR: ONLINE
POWER: 15 KW

HIGH SPEED SLITTING MACHINE
PROCESS SPEED: 800 METERS PER MIN
ROLL DIAMETER: MAX 1500mm
SLITTING WIDTH: 80mm
PAPER TUBE SIZE: 76mm DIAMETER
AUTO TENSILE CONTROL: AVAILABLE ONLINE
METER COUNTING: AVAILABLE ONLINE

OIL HEATER (4)
HEATING POWER: 60 KW
MOTOR POWER: 7.5 KW
OIL PUMP FLOW: 30 CUBIC METERS PER SECOND
PRESSURE: 0.4 KPA

WATER CHILLER
DRIVE SYSTEM: SCREW
COOLING CAPACITY: 300,000 CALORIES
TEMP: 0 TO 20 CELSIUS
POWER: 110 KW

AIR BLOWER
SPEED: 1450 RPM
AIR BLOW CAPACITY: 12,000 CUBIC METERS PER HOUR
PRESSURE: 5200 PA
POWER: 30 KW x 3, 45 KW x 1

AIR COMPRESSOR
DRIVE SYSTEM: SCREW
PRESSURE: 0.8 KPA
POWER: 15 KW

HEATING SYSTEM: ELECTRIC
TEMP: 350 CELSIUS
HEATING TIME: 6 TO 8 HOURS
POWER: 4 KW

ULTRASONIC CLEANING MACHINE
3mm THICK
SIZE: 2000 X 500mm
FREQUENCY VIBRATION: 100 KHZ
TEMP: 40 CELSIUS

ELECTRONIC PANEL BOARD

PLATFORM

Learn More

REFERENCE NUMBER: M-5219 (13132318KLF12U) L NACHI ROBOTS YEAR 2006 NACHI FUJIKOSHI JAPAN MANUFACTURING DATE YEAR 2006 FOR ALL MODELS INSTALLED MAY 2007 (27) X NACHI SJ-120C YEAR 2006 120KG (DOUBLE ARM) 1880KG, 120KG (GLASS CARRIER) (10) X NACHI SC-400LC YEAR 2006 400KG (DOUBLE ARM) 1880KG, 120KG (GLASS CARRIER) 3 SPARES (4) X NACHI VS-6577E YEAR 2006 5KG (SINGLE ARM) 29KG, 5KG, ASSEMBLE USING FOR LABEL (293 PCS) X SPARE PARTS (INCLUDING 3 MODELS) (103 KINDS) THESE ROBOTS ARE ALMOST BRAND NEW Learn More

BRAND: MAMMUT

MODEL: P2 S240 QS28/PA
YEAR 2011

GENERAL MACHINE DATA
UP TO 3,100 STITCHES / MINUTE
MAX. SEWING AREA 2,400 X 2,600mm
STITCH LENGTH 2-8mm

MECHANICAL DATA
DIMENSIONS (L X W): 4100 X 7500mm
WEIGHT: APPROXIMATELY 2,300 KG
AIR CONNECTION: 6 BAR
AIR CONSUMPTION: 250 L / MIN

ELECTRICAL DATA
3 PHASES / 400 V
50-60 HZ
3.5 KW

QUANTITY: 1

Learn More

253 – 51 x 74 13.5G 4.5” (12)
QUANTITY: 61

253 – 51 x 71 13.5g 4.5” (12)
QUANTITY: 29

253 – 59 x 74 13.5g 4.5” (12)
QUANTITY: 4

336 FE 4/6 (48x68) 13g 6” (16)
QUANTITY: 9

336 FE 5/0 (54x73) 13g 6” (16)
QUANTITY: 7

336 FE C/K (69x76) 13g 6” (14)
QUANTITY: 9

336 FE 6/6 (69x73) 13g 6” (14)
QUANTITY: 8

4/6 OPEN COIL 13.75 5.25” (20)
QUANTITY: 10

364 4/6XL 13-6 5.25” (16)
QUANTITY: 90

609 FE 4” 6/6 POCK COIL 15G (40)
QUANTITY: 14

588 FE 8” 4/6 POCKET COIL 15G/2.0mm (48x68x8) (44)
QUANTITY: 11

488 FE 8” 5/0 POCKET COIL 15G/2.0mm (54x74x8) (40)
QUANTITY: 4

C/K QE BOLSA 896/1057 15-16 8” TB (3KEV) (20)
QUANTITY: 20

396 BR 7” 3/3 13.75G (14)
QUANTITY: 10

396 BR 7” 3/3XL 13.75G (14)
QUANTITY: 14

396 BR 7” 4/6 13.75 (14)
QUANTITY: 21

396 BR 7” 5/0 13.75G (14)
QUANTITY: 8

396 BR 7” 6/6 13.75G (14)
QUANTITY: 9

368 FE 6” 4/6 (45.5x65.5) 12.5g (16)
QUANTITY: 13

5/5 1131/1386 17 1” NANO COIL (3KBU30) (60)
QUANTITY: 25

789 ACTIVE EDGE 3/3 8” (3KFT56) LEGGETT (36)
QUANTITY: 9

789 ACTIVE EDGE 3/3XL 8” (3KFT56) LEGGETT (36)
QUANTITY: 20

5/0 CPE BOLSA 580/682 13 ¾-16 8” (3KFT53) (28)
QUANTITY: 11

660 3/3XL INNERACT 14.5-6g 6” (16)
QUANTITY: 31

660 4/6 INNERACT 14.5-6g 6” (16)
QUANTITY: 7

660 72x80 INNERACT 14.5-6g 6” (16)
QUANTITY: 56

660 CK INNERACT 14.5-6g 6” (14)
QUANTITY: 11

Learn More

REFERENCE NUMBER: R-4930 
ITEM 001 
TSUDAKOMA POLYESTER / SYNTHETIC YARN SIZING PLANT 
YEAR: 1992 
KSH500 TYPE 
WIDTH: 2200mm 
ITEM 002 
TSUDAKOMA AIR JET LOOMS DOBBY 
QUANTITY: 70 SETS 
ITEM 003 
PLANE LOOM 
QUANTITY: 100 SETS 
QUANTITY AVAILABLE: 1 SET COMPLETE SIZING PLANT 

Learn More

REFERENCE NUMBER: P-4139
JLG MANLIFT G9-43A YEAR 2010

JLG MANLIFT
TYPE: G9-43A
YEAR: 2010
SIZE: 9000
HOURS: 2738
DESCRIPTION:
JOHN DEERE TURBO DIESEL
50 INCHES CARRIAGE
48 INCHES PALLET FORKS
AUX HYDRAULICS

QUANTITY: 1

EMAIL US FOR PRICE & PICTURES
INCLUDE OUR REFERENCE NUMBER

Learn More

REFERENCE NUMBER: M-3350

RIETER K45 RING SPINNING FRAMES LINKED WITH MURATA 21C WINDERS- YEAR 2008 TO 2009

 

RIETER COMPACT RING SPINNING FRAMES MOD. K45

YEAR: 2008/09

NUMBER OF SPINDLES: 1632

SPINDLE GAUGE: 70mm

RING TUBE LENGTH: 200mm

SPINDLE WHARVE DIAMETER: 18mm

DRAFTING SYSTEM: RIETER

RING DIAMETER: 40mm

OHTC: CHINESE

CREEL: NR. 6 ROWS

MAIN MOTOR: 80KW

SUCTION MOTOR: 15KW

SUCTION: INDIVIDUAL

WASTE COLLECTION: MANUAL

DOFFER: AUTO DOFFER LINKED

BOTTOM ROLLER: 27mm

QUANTITY: 6

 

LINKED TO:

MURATA CONE WINDERS MOD. 21C

YEAR : 2008

NUMBER OF DRUMS: 34

YARN CLEARER: USTER QUANTUM 2 WITH FOREIGN FIBER SENSOR

MEASURING HEAD: MK C15 F23

MACHINE HAND: 3 X LH, 3 X RH

SPLICER: G 2Z

WAXING: AVAILABLE

SUCTION: INDIVIDUAL

OHTC: AVAILABLE

PACKAGE CONVEYER BELT: AVAILABLE

DOFFER: AUTO

QUANTITY: 6

Learn More