Search results for: 'Drive sh'

L-1184 SSM AIR COVERING DP3 C DIGICONE PRECIFLEX YEAR 2012

BRAND: SSM
MODEL: DP3 C DIGICONE PRECIFLEX
YEAR: 2012
MECHANICAL SPEED UP TO 1200 M/MIN
PACKAGE SHAPE PROGRAMMABLE (RIGHT NOW AT 290m)
JET HEBERLAIN
N. 40 POSITIONS
SUPERIOR CREEL FOR BOBBINS
INDIVIDUALLY CONTROLLED ELECTRONIC SINGLE DRIVES
INSTALLED POWER: 500 W FOR SPINDLE
AIR COVERING 6 BAR TO 10 BAR OF THE JET
ALL POSITONS RUNNING

QUANTITY: 1

Learn More

R-1429 MONFORTS SANFORISER, WIDTH 2400mm

MONFORTS SANFORISER
MAX FABRIC WIDTH: 2400mm
THIS SANFORISER IS EXCEPTIONALLY WELL EQUIPPED
WITH A MAHLO WEFT STRAIGHTENER
AND A 10MT LONG CLIP TENTER
THE RUBBER BELT
WHICH IS IN ALMOST AS NEW CONDITION IS 2460mm WIDE
AND THE PALMER CYLINDER IS 2400mm DIAM.
MAKING IT SUITABLE FOR PROCESSING A WIDE RANGE OF FABRICS FROM LIGHTER WEIGHT APPAREL FABRICS TO DENIM
TWILLS AND BED SHEETINGS
HIGH ENTRANCE FRAME WITH ONE PAIR KF10 GUIDERS ON A SCREWED WIDTH ADJUSTMENT SHAFT
COMPENSATOR AND TENSION CONTROL RAILS
DRIVEN DRAW ROLLER
COMPENSATOR
MAHLO BOW AND SKEW WEFT STRAIGHTENER, 4 HEADS
CLIP TENTER, 10M WITH STEAMING FIELD
RUBBER BELT SHRINKING MACHINE
RUBBER BELT WIDTH 2460mm
PALMER CALENDER WITH 240CM DIAMETER CYLINDER
ENDLESS FELT BLANKET 2470mm WIDE
BLANKET DRYING CYLINDER
COOLING CYLINDER, WATER COOLED
DRAW ROLLERS
SCRAY FOR NON-STOP BATCHING
EXIT FRAME WITH DRAW ROLLER
SURFACE DRIVEN A-FRAME BATCHER AND PLAITER

QUANTITY: 1

Learn More

C-3980 KRAFT PAPER MAKING MACHINE WITH GAS BOILER, CAPACITY 3 TO 5 T/D, NET PAPER WIDTH 1200mm

KRAFT PAPER MAKING MACHINE
WITH GAS BOILER
CAPACITY: 3 TO 5 T/D KRAFT PAPER MACHINE
1092 KRAFT CORRUGATED PAPER MACHINE
WITH RECYCLE PAPER AS RAW MATERIAL
TECHNICAL PARAMETER:
OUTPUT: KRAFT PAPER, CORRUGATED PAPER
WEIGHT: 60 TO 180G/M2
NET PAPER WIDTH: 1200mm

QUANTITY: 1

Learn More

C-3964 JAGENBERG CUTTING MACHINE, WIDTH 1800mm, YEAR 1973 TO 2006

JAGENBERG CUTTING MACHINE
BRAND: JAGENBERG
YEAR: 1973 TO 2006
WIDTH: 1800mm

QUANTITY: 1

Learn More

REFERENCE NUMBER: V-1046 KARL MAYER MR(E)S 56 SU MAKER: KARL MAYER TYPE: MR(E)S 56 SU WIDTH : 130 INCHES PATTERN WHEELS OR CHAIN L1 - L3 OVER CHAIN SU – AGGREGATES TOTAL 28 AGGREGATES BARS 2 GROUND + 2 PICCO BARS INSTALLED 1 GROUND BAR AVAILABLE WITHOUT GUIDES PATTERN BARS 52 INSTALLED LYCRA BAR: 1 INSTALLED SUPERSTRUCTURE TYPE : LIBERTY YES QTY BEAM SHAFTS : 3 X 70 mm TAKE UP TYPE : STANDARD QTY EBA BEAM DRIVE : 1 EBA FOR GROUND 1 EBA FOR LYCRA PATTERN BEAMS : 54 PIECES NEEDLE NOS : 59.75. G1 CLOUSER NOS : C – 24-76/4-14 SINKER NOS: S-24 -98 -59 /S 24-99 - 59 GUIDE REF : AL – 24 – 26 -38 TRICK REF : F – 24 -76/4-14 PATTERN GUIDES : F- AS IT IS IN THE MACHINE YARNCONTROL SYSTEM: PROKOSTOP QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1156 F.O.R CARDING MACHINE WEBMASTER WM2+2, YEAR 1999, WIDTH 3000MM SPECIFICATIONS: 1 PC. CARDING MACHINE FOR WEBMASTER WM2+2 3000 MM WORKING WIDTH YEAR OF CONSTRUCTION 1999 THE MACHINE IS MECHANICALLY OKAY, BUT THE DRIVES SHALL BE REPLACED. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5266 (1313236LH12RX) L MULLER NF 53 NEEDLE LOOM MULLER NF 53 FULLY RECONDITIONED NEEDLE LOOMS SHED MOTION: NORMAL # OF HARNESSES: 12 FRAMES INCORPORATED TAKE DOWN: DOUBLE KNURLED STEEL BINDER THREAD: SYSTEM III WEFT FEED: MUTRAN II PRODUCTION MONITOR: 3 SHIFT PICK CLOCK PICK REPEAT: 8 – 48 PICK CHAIN LINK DRIVE: BRAKE MOTOR / SLOW MOTION POWER: 230/240 VOLT 3 PHASE 60HZ ACCESSORIES: 4 RAIL STOP MOTION, CONE HOLDERS, HEDDLES & DROP WIRES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5265 (1313165BE12RX) L MULLER NF 42 NEEDLE LOOM MULLER NF 42 FULLY RECONDITIONED NEEDLE LOOM QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-2008

TANDEM SET OF GESSNER LYNX 2000 NAPPERS YEAR 1997

 

TWO GESSNER LYNX 2000 KNIT GOODS AND DOUBLE ACTING 108” ELECTRONIC NAPPERS

VERY GOOD CONDITION

INCLUDES TWO SETS OF SPARE NAPPER ROLLS, ROLL SHARPENER AND GRINDER, FLOCK HOUSING

RACKS NOT INCLUDED WITH SPARE ROLLERS

YEAR:  1997

108” FACE WIDTH

ELECTRIC DRIVE

TWO NAPPERS ONE IN FRONT OF THE OTHER

24-ROLL NAPPERS

DOUBLE ACTING HAS TO DO WITH THE TYPE WIRE ON THE ROLLS AND THE DIRECTION THAT THE CYLINDER TURNS.

THE GESSNER “LYNX” ELECTRONIC NAPPER IS MADE TO RUN EITHER KNITS OR WOVENS; THERE IS A KEY WHICH YOU TURN TO SELECT THE MODE YOU WANT, KNIT-OR-WOVENS, AND THE CYLINDER REVERSES.

 

QUANTITY:  1

 

(EMAIL US FOR PICTURES)

Learn More