Search results for: 'machine+can+0'

NON-INVASIVE VENTILATOR
CERTIFICATE: CE
MEDICAL VENTILATOR
TECHNICAL PARAMETERS OF DOUBLE LEVEL VENTILATOR
VENTILATOR TYPE: ELECTRIC CONTROL
SCOPE OF APPLICATION: TREATMENT AND TITRATION OF SLEEP APNEA HYPOPNEA SYNDROME, SEVERE SNORING, AND RESPIRATORY INSUFFICIENCY.
DISPLAY INTERFACE: 3.5-INCH LED SCREEN, CHINESE OPERATING SYSTEM
*VENTILATION MODE: CPAP, S, S/T, T
PRESSURE RANGE:
PRESSURE RANGE: 4-30CMH2O (±0.5CMH2O)
PRESSURE ACCURACY: + 0.5CMH2O
PARAMETER SETTING:
DELAYED BOOST: 0-60MIN, SET THE DIVISION INTERVAL 5MIN
INITIAL PRESSURE: 4CMH2O TREATMENT PRESSURE / RESPIRATORY PRESSURE SETTING
THERAPEUTIC PRESSURE: 4-20CMH2O (IN CPAP MODE)
TARGET TIDAL VOLUME: 150ML - 1500ML, ON/ OFF
MAXIMUM SUCTION PRESSURE: 4-30CMH2O, (CAN BE SET WHEN THE TARGET TIDAL VOLUME FUNCTION IS ON)
MINIMUM SUCTION PRESSURE: 4-30CMH2O (NOT HIGHER THAN THE SUCTION PRESSURE), (CAN BE SET WHEN THE TARGET TIDAL VOLUME FUNCTION IS ON)
INSPIRATORY PHASE PRESSURE: 4-30CMH2O
EXPIRATORY PRESSURE: 4-30CMH2O
EXPIRATORY DECOMPRESSION: PATIENT, OFF, 1-3, THREE ADJUSTABLE
MANUAL VOLTAGE REGULATION: 0-2 GEAR, 0-2CMH2O (ONLY AVAILABLE IN CPAP MODE)
INSPIRATORY SENSITIVITY: 1-8 STALLS
EXPIRATORY SENSITIVITY: 1-8 STALLS
RESPIRATORY FREQUENCY: 3-40 TIMES / MIN
INSPIRATORY TIME: 0.3-3.0S
BACKUP RATE: ON / OFF, DEFAULT 10
PRESSURE RISE TIME: 1-4 STALLS
HUMIDIFIER: 1-5 ADJUSTABLE IN 5 GEARS
*TITRATION FUNCTION: SUPPORT MANUAL AND AUTOMATIC PRESSURE TITRATION, BUILT-IN REMOTE WIRELESS COMMUNICATION MODULE, COMPLETE THE RANDOM SWITCHING OF SINGLE AND DOUBLE LEVEL MODES IN THE TITRATION PROCESS, AND CONTROL MORE THAN 11 VENTILATOR PARAMETERS AT THE SAME TIME.
AUXILIARY FUNCTION: AUTOMATIC AIR LEAKAGE COMPENSATION, AUTOMATIC STARTUP, AUTOMATIC SHUTDOWN, DELAYED SHUTDOWN, SCREEN BACKLIGHT ADJUSTMENT
MONITORING PARAMETERS: PRESSURE, TIDAL VOLUME, RESPIRATORY RATE, MINUTE VENTILATION VOLUME, AIR LEAKAGE VOLUME, INSPIRATORY TIME, BLOOD OXYGEN SATURATION
WAVY CURVE: PRESSURE TIME WAVEFORM, FLOW RATE TIME WAVEFORM
ALARM PROMPT: PIPELINE AND MASK FALLING OFF, AIR LEAKAGE PROMPT, POWER INTERRUPTION, TREATMENT MACHINE FAILURE, HUMIDIFIER FAILURE, LOW VOLTAGE, HIGH RESPIRATORY RATE, LOW RESPIRATORY RATE, LOW MINUTE VENTILATION VOLUME, LOW BLOOD OXYGEN, REPLACEMENT OF FILTER COTTON, FULL SD CARD, RE INSERTION OF SD CARD
*DATA MANAGEMENT:
NETWORK DATA: BMC + RESPIRATORY HEALTH MANAGEMENT CLOUD PLATFORM
SD CARD DATA: RESART NPAP DATA ANALYSIS SOFTWARE
PARTS:
SD CARD: STANDARD
SD CARD SLOT: STANDARD
PIPING: 9 22MM, 1.8M LONG
FACE SHIELD: F2 NOSE MASK AS STANDARD
NOISE: LESS THAN 30DB
ENVIRONMENT CONDITION:
TEMPERATURE:
(WHEN USED) 5 -35 C
(DURING TRANSPORTATION AND STORAGE) -20 C -55 C
ATMOSPHERIC PRESSURE:
(WHEN USED) 760-1060HPA
(DURING TRANSPORTATION AND STORAGE) 760-1060HPA
WORKING HOURS: MORE THAN 8 HOURS
POWER SUPPLY REQUIREMENTS:
AC VOLTAGE: 100-240V
FREQUENCY: 50HZ/60HZ
INPUT POWER: LESS THAN 2A
WATERPROOF LEVEL: IP22 - DRIP PROOF EQUIPMENT
INSTRUMENT SIZE: 290mm X 180mm X 134mm
WEIGHT: 1.5KG (EXCLUDING HUMIDIFIER) 2.5KG (INCLUDING HUMIDIFIER)
ITEM 001
QUANTITY: 10 SETS-999 SETS
ITEM 002
QUANTITY: 1,000 SETS-9,999SETS
ITEM 003
QUANTITY: ≥10,000 SETS

Learn More

Learn More

REFERENCE NUMBER: L-4855

MASCOE COATING MACHINE, MODEL 5KC, YEAR 2006 (2000mm)

 

MAKE: MASCOE

YEAR: 2006

MODEL: 5KC

 

QUANTITY: 1

 

Learn More

M-4817 RIETER SBD-15 DRAWING MACHINES YEAR 2003

DRAWING MACHINES
RIETER SBD 15
YEAR 2003
SINGLE DELIVERY CAN SIZE 24” X 48”
AUTOMATIC CAN CHANGER

QUANTITY: 2

Learn More

M-4816 RIETER SBD-10 DRAWING MACHINE YEAR 2000

DRAWING MACHINE
RIETER SBD 10
YEAR 2000
SINGLE DELIVERY CAN SIZE 24” X 48”
AUTOMATIC CAN CHANGER

QUANTITY: 1

Learn More

REFERENCE NUMBER: K- 0713 RIETER COTTON COMBING PLANT 2002 1 X RIETER UNILAP MODEL: E32 5 X RIETER HIGH SPEED COMBING MACHINES MODEL: E62 YEAR: 2002 8 X COMBING HEADS/POSITIONS PER MACHINE COILER (CAN) SIZE: 24" X 48" AUTOMATIC CAN CHANGER INDIVIDUAL SUCTION WITH 6 TROLLIES FOR SPOOLS INCLUDING LAP TRANSPORT TROLLEYS AND SPOOLS EXCELLENT CONDITION STILL ERECTED ON MILLS FLOOR AND CONNECTED TO POWER TEST RUN WITHOUT MATERIAL IS POSSIBLE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4038

BENNINGER ZELL MERCERIZER YEAR 2007 WIDTH 1800mm

 

BRAND: BENNINGER ZELL

MODEL YEAR: 2007

ROLLER WIDTH: 2000mm

WORKING WIDTH: 1800mm

TOTAL FABRIC QUANTITY: 160 METERS

SEARCH FOR PRE-WETTING AND IS LOCATED AT THE ENTRANCE TIGHTENING.

MERCERIZED PART: TWO-CHAN, ARE TIGHTENING INTERMEDIATE OUTPUT.

BENNINGER HAS BOMA CONTROL SYSTEM

STABILIZE KISMI : A CHAN , OUTPUT ARE TIGHTENING SEARCH

ELUTING FRACTION CAN OPERATE INDEPENDENTLY

THE MACHINE ONLY FOR THE PURPOSE OF DESTROYING THE AVAILABLE

ELECTRICAL PANEL HAS BEEN DESIGNED ACCORDINGLY BY BENNINGER

WASHING BOATS: FOUR PIECE, BENNINGER WASHING TECHNIQUES APPROPRIATE TO EACH, DOUBLE FABRIC PASS, SEARCH TOP SQUEEZE, INDIRECTLY HEATED, DIRECT WATER SUPPLY AND CHEMICALS SHOULD BE FED TWO BOAT.

EVERY BOAT OUT THERE IN THE FABRIC OPENING AND INTERMEDIATE CLAMPING UNITS HAVE.

THE LAST BOAT IS IN ITSELF CONSISTS OF TWO PARTS, THE BATHROOMS DO NOT MIX.

THE NEUTRALIZATION CAN BE PERFORMED IN THE LAST COMPARTMENT.

THERE ARE AUTOMATIC ACID DOSAGE UNIT.

THERE ARE 7.5 KN CLAMPING CYLINDER IN THE OUTPUT SECTION.

SEARCH SQUEEZED FABRIC FROM THE FABRIC CENTERING.

THROUGH THE WINDER UNIT IS WRAPPED IN THE DOCK

Learn More

REFERENCE NUMBER: R-8107 
SUCKER MULLER SIZING MACHINE
YEAR 2000 
WIDTH 3600mm
QUANTITY: 1

Learn More

REFERENCE NUMBER: V-1468

SURGICAL GAUZE COMPRESSING, FOLDING, AND BAGGING MACHINE

 

COTTON GAUZE MEDICAL COMPRESS FOLDING AND BAGGING MACHINE, WHICH AUTOMATICALLY FOLDS COTTONG GAUZE, COMPRESSES, AND THEN PACKS THEM INDIVIDUALLY OR IN GROUPS INTO SACHETS.

 

FEATURES             

 

USEFUL WIDTH: 45 CM

 

NUMBER OF TRACKS: MAXIMUM 2 (VARIES ACCORDING TO THE SIZE OF COMPRESSES)

 

SIZE:

MINIMUM DIMENSIONS OF COMPRESSES: 5 CM X 5 CM

MAXIMUM DIMENSIONS OF COMPRESSES: 10 CM X 20 CM (16 PLIES)

ALL THE USUAL OR INTERMEDIATE SIZES CAN BE PRODUCED ON THE MACHINE BY SIMPLE ADJUSTMENTS.

 

NUMBER OF PLIES 8 / 12 / 16 / 20 / 24 / 28 / 32 PLIES (VARIES ACCORDING TO THE SIZE OF COMPRESSES)

 

FOLDING: THE CONVENTIONAL FOLDING IS THE 5-FOLD "SURGICAL" OR "AMERICAN" TYPE, WITH EDGES AND CORNERS TUCKED-IN, HOWEVER BY OFFSETTING FOLDS OTHER COMBINATIONS ARE POSSIBLE.

 

STACKING:  STACKING IS CARRIED OUT IN THE CHANNELS WHERE THE COMPRESSES ARE COUNTED AND READY TO BE MANUALLY INSERTED INTO PAPER BAGS.

 

PRODUCTION      :

EXAMPLES OF THEORETICAL PRODUCTIONS:

5 CM X5 CM 8 PLIES (2 TRACKS) 13200 COMPRESSES PER HOUR

7.5 CM X 7.5 CM 12 PLIES (2 TRACKS) 13200 COMPRESSES PER HOUR

10 CM X 10 CM 12 PLIES (2 TRACKS) 12000 COMPRESSES PER HOUR

 

OPTIONS:

BARIUM FIXING TRACK BY TRACK

GAUZE ROLL LOADING BY PNEUMATIC CYLINDERS"

FEATURES LIST:

MATERIAL SUPPORT ADJUSTABLE IN WIDTH,

POSITIVE UNWINDING WITH TENSION CHECK ADJUSTABLE TRACK BY TRACK,

MULTIPLE LENGTH FOLDING DEVICE ADJUSTABLE TRACK BY TRACK,

SPRAY HUMIDIFYING SYSTEM,

SUCTION SYSTEM,

ANTI-STATIC BARS,

ADJUSTABLE FLY CUT MODULE MOTORISED WITH BRUSHLESS MOTOR,

THREE CROSS FOLDING MECHANISMS WITH INDEPENDENT ADJUSTMENT OF EACH FOLD,

TRANSFER BELTS FOR THE COMPRESSES,

MOTORISED LATERAL UNWINDING OF THE PAPER ROLL MODULE,

DEVICE FOR INDIVIDUAL, IN MULTIPLES OR IN SHINGLED FORM PACKAGING - WITH A CHANGEABLE

NUMBER OF COMPRESSES BY SACHET,

CHECK OF FOLLOWING OPERATIONS TRACK BY TRACK:

. END OF FABRIC,

. PRESENCE OF SEAM,

. PRESENCE OF CROSS-FOLDED COMPRESS,

. JAM PREVENTION BEFORE PACKAGING.

COLD SEALING BY PRESSURE AND CUTTING OF SACHETS IN PRINTED AND ZONED PAPER,

POWER SYSTEM OF PACKAGING BY BRUSHLESS MOTOR ALLOWING FOR FLY ADJUSTMENT OF:

. THE COMPRESS POSITION IN THE SACHET,

. THE CROSSWISE KNURLING POSITION,

. THE CROSSWISE CUTTING OF SACHETS.

ACCELERATION RAMP BY FREQUENCY VARIATION,

MACHINE OPERATION BY TOUCH-SENSITIVE SCREEN:

. STORABLE CONFIGURATIONS,

. CLEAR LANGUAGE FAULT DISPLAY,

. COUNTERS : TOTALIZER, PRE-SELECTION, ETC.,

. SOUND AND VISUAL ALARMS,

. "INCIDENT" STATISTICS.

STARTING, STOPPING, STEP BY STEP - BY REMOTE CONTROL.

* CONTINUOUS, TRACK BY TRACK INTEGRATION OF ULTRASONIC BARIUM FIXING.

* PAPER ROLL LOADING BY PNEUMATIC CYLINDERS.

* INK JET MARKING UP TILL 8 LINES.

* SACHETS QUALITY CONTROL DEVICE: EITHER A CHECK BY PHOTO CELLS, OR BY CAMERAS,

* FAULTY SACHET EJECTION DEVICE.

* TABLE WITH CONVERGING BELTS.

Learn More

REFERENCE NUMBER:P-8699

TWO HEADS WEIGHING PACKING MACHINE

 

POWER SUPPLY: 220V 50/60Hz 500W

WEIGHTING RANGE: 50 TO 2000G

ACCURACY ≤±1g

HOPPER VOLUME: 60L

PACKING SPEED: 10 TO 20 BAG/MIN

MACHINE SIZE: 630X530X1660mm

MACHINE WEIGHT: 150KG

CAPACITY: 3 TO 4M³/H (CAN BE ADJUSTED)

VOLUME OF HOPPER: 0.15 M³

LIFTING HEIGHT: 1.9M (OR AS YOUR CUSTOMIZE)

VOLTAGE: AC 380V/500W

 

QUANTITY: 1

Learn More