Search results for: 'machine+de+fabri'

REFERENCE NUMBER: T-6928 OSTHOFF SINGEING MACHINE, WIDTH 2400mm, YEAR 1992 OSTHOFF SINGEING MACHINE TYPE PK90 YEAR 1992 ROLLER WIDTH: 2400mm FABRIC INFEED WITH E+L KF10 BRUSHING TYPE VP87/1 SINGING WITH TWO BURNERS BRUSHING KLEINEWEFERS/RAMISCH, TYPE VI6, 2 BRUSHES DESIZING, TYPE FO-02/2, YEAR 2006, SQUEEZER BATCHER FILTER QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6920 MCS HIGH TEMPERATURE DYE JIGGER, WIDTH 2000mm, YEAR 1999 BRAND: MCS ITALY YEAR 1999 ROLLER WIDTH 2000mm BOILER DIAMETER 1800mm SUITABLE FOR 400 KG OF FABRIC INFEED AND EXIT BY BATCH WINDER ALL SERVOMOTOR DRIVEN (NO HYDRAULIC) MCS CT 401 CONTROL DEVICE EXPANSION VESSEL (MACHINE IS IN WAREHOUSE) MACHINE IS IN EXCELLENT CONDITION QUANTITY: 1 Learn More

R-4533 MAMMUT VMK SELECT DOUBLE LOCK CHAINSTITCH MULTI-NEEDLE QUILTER, YEAR 2014
2 BAR , 150m DISTANCE BETWEEN BARS
WIDTH UP TO 2700mm = 106 INCHES

MAMMUT VMK SELECT DOUBLE LOCK CHAINSTITCH MULTI-NEEDLE QUILTER
YEAR: 2014
96 SEPARATELY CONTROLLABLE NEEDLES
FULLY AUTOMATIC NEEDLE PLAN CHANGE
TOP AND BOTTOM THREAD CUTTER AT EACH SEWING POSITION
MATERIAL WIDTH UP TO 2700mm
TWO NEEDLE BARS
150mm SPACING
HANDWHEEL ADJUSTMENT OF HEIGHT OF PRESSER PLATE
ELECTRONIC THREAD BREAK DETECTOR FOR TOP AND BOTTOM THREADS
MATERIAL UNWIND DEVICE
RACKS FOR TOP AND BOTTOM THREAD
ONE CATWALK EACH ON FRONT AND REAR OPERATING SITE
TROUGH INFEED FOR UPPER MATERIAL WITH MOTOR-DRIVEN ROLLER SYSTEM
AUTOMATIC MARKING AND DETECTING UNIT FOR PATTERN CONFORM LATERAL CUT
ELECTRONICS AND MOTORS 400V, 3 PHASES
CONCRETE BASES AND VIBRATION DAMPERS

 

Learn More

REFERENCE NUMBER: M-7826

SAURER EPOCA-3 PENTACUT SINGLE EMBROIDERY HOOP COMPUTERIZED SHUTTLE EMBROIDERY MACHINE YEAR 2003

 

COMPUTERIZED SHUTTLE EMBROIDERY MACHINE

MAKE: SAURER

MODEL: EPOCA III PENTACUT (SINGLE EMBROIDERY HOOP)

WORKING SPEED: 420 REVOLUTION

YEAR: 2003

 

QUANTITY: 1

Learn More

M-6247 OSTHOFF SP-80 SINGEING MACHINE YEAR 1980

SINGEING MACHINE
MAKE: OSTHOFF
MODEL: SP 80
YEAR: 1980
WORKING WIDTH: 1800mm TO 2000mm
(BURNER WIDTH 2400mm, ROLLER WIDTH INSIDE SINGEING BOX 2300mm)
ROLLER AND CYLINDER WIDTH AFTER SINGEING BOX 2100mm
FABRIC ENTRY WITH GUIDE ROLLERS AND TENSIONING DEVICE
OSTHOFF SINGEING MACHINE WITH 2 x DOUBLE JET BURNERS FOR FACE AND BACK SINGEING
DUST SUCTION FAN WITH EXHAUST
DESIZING TANK WITH 4 BOTTOM AND 4 TOP SS ROLLERS
1 x SS PREPARATION VESSEL
EXIT WITH PLAITER
3 TROLLEYS FOR THE FABRIC INCLUDED IN LINE
380V, 50HZ
UPGRADED ELECTRIC CONTROL BOX AND PB GAS DELIVERY UNITS

CONDITION: GOOD

QUANTITY: 1

Learn More

M-1947 OSTHOFF SINGEING MACHINE MODEL VP99 (6413) YEAR 2005 WIDTH 2100mm

OSTHOFF SINGEING MACHINE
MODEL VP99 (6413)
YEAR 2005
WIDTH 2100mm
NATURAL GAS HEATING
GAS PRESSURE 0,3 – 3 BAR
GAS CONSUMPTION 20 М³/HOUR
COLD WATER CONSUMPTION 2,2
M³/HOUR ± 10%
INSTALLED POWER 23 KW
FABRIC INTRODUCTION
SYSTEM WITH ACCUMULATOR FOR ROLLS CHANGING WITHOUT INTERRUPTION OF WORKING
CLEANING SYSTEM WITH DUST DETECTOR
DOUBLE RAMP
DOUBLE BRUSHING GROUP
2- BENNINGER EXTRACTA CLOSED WASHING DEVICE FOR FABRIC IMPREGNATION WITH A SOLUTION FOR THE NEXT DESIZING
EXIT ON THE ROLL
AUTOMATIC SYSTEM FOR PROCESS COMMAND
SPEED: 10 TO 100 M/MIN

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-1861 (1313235MKD12RX) SANTEX PRE-TREATMENT AND WASHING MACHINE TYPE ACTIWASH YEAR 2002 DESIGNED FOR LOW-TENSION PRE-TREATMENT OF WOVEN AND KNITTED GOODS MANUFACTURER: SANTEX - SWITZERLAND YEAR OF MANUFACTURE: 2002 WORKING WIDTH: 2200/1800 mm SPEED OF MACHINE: 3-100 M/MIN PRODUCTION SPEED: APPROX. 75 M/MIN THE DAILY OUTPUT WILL DEPEND E.G. ON QUALITY AND WEIGHT OF FABRICS/KNIT GOODS YOU WILL WASH ON THESE MACHINES. SO FAR THE PLANT WAS RUNNING AT AN AVERAGE SPEED OF 40 M/MIN, I.E. 2,400 MTRS PER WORKING HOUR. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1861 (770235KOL6RX) SANTEX PRE-TREATMENT AND WASHING MACHINE TYPE ACTIWASH YEAR 2002 DESIGNED FOR LOW-TENSION PRE-TREATMENT OF WOVEN AND KNITTED GOODS MANUFACTURER: SANTEX - SWITZERLAND YEAR OF MANUFACTURE: 2002 WORKING WIDTH: 2200/1800 mm SPEED OF MACHINE: 3-100 M/MIN PRODUCTION SPEED: APPROX. 75 M/MIN THE DAILY OUTPUT WILL DEPEND E.G. ON QUALITY AND WEIGHT OF FABRICS/KNIT GOODS YOU WILL WASH ON THESE MACHINES. SO FAR THE PLANT WAS RUNNING AT AN AVERAGE SPEED OF 40 M/MIN, I.E. 2,400 MTRS PER WORKING HOUR. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5236 (1313DYFAXX12) L SAMIL SIDC-6200 HP/HT JET DYEING MACHINE YEAR 2000 CAPACITY 500KG USED HP / HT JET DYEING MACHINE MAKER: SAMIL INDUSTRIAL CO., LTD., KOREA MODEL: SIDC-6200 YEAR: 2000 QUANTITY AVAILABLE: 1 Learn More

MAKE: CIBITEX
COMPACT UNIT FOR PRE-TREATMENT AND DRYING OF FABRICS PRINTED USING BOTH ACID, REACTIVE OR PIGMENTED INKS
MAXIMUM WORKING WIDTH: 1800mm
POWER INSTALLED: 82 Kw
VOLTAGE: 400 V 50Hz
MAXIMUM CYLINDERS TEMPERATURE: 210 °C
INTERNAL CONTENT (DEPENDING ON FABRIC): 300 M
MAX LOAD: 280 KG
COATING BASIC CAPACITY: 40 L
DIMENSIONS: 3500 X 4600 X 1890mm
WEIGHT: 4,935 KG

QUANTITY: 1

 

Click here to watch the videos of this machine on YouTube.

Learn More