Search results for: 'gas t'

REFERENCE NUMBER: R-8152
FLORIGO AC300 POTATO CRISP LINE YEAR 1994
FLORIGO POTATO CRISP LINE, MANUFACTURED BY FLORIGO
FLORIGO MODEL AC300, YEAR 1994
QUANTITY: 1

R-1391 OSTHOFF SINGEING , WORKING WIDTH 1800mm, YEAR 1983 TO 1993

OSTHOFF SINGEING RANGE
WORKING WIDTH: 1800mm
YEAR: 1983 TO 1993
PRE TENSION DRIVEN ENTRY WITH J BOX SCRAY
WITH DOUBLE BRUSHING UNIT
E+L KF20 WITH CENTRALISING GUIDERS
OSTHOFF SINGE TYPE U80 WITH 2 GAS BURNERS
E+L DOGAL GUIDER COMPLETE
WITH CONOSCREEN ROTORY MICROFILTERING
YEAR: 2005
NUOVA - RUDECO EXTRACTION DUST SYSTEM
YEAR: 2000
SIEMENS PLC CONTORLES FITTED IN YEAR: 2000
OXIDIZATION SECTION 10 METER CLOTH CONTENT
KUSTER DESIZING WITH 2 DESIZE TANKS AND 2 PADDERS
2 CHEMICAL MIXING TANKS
TAKE OFF BY CONTACT BATCHER

QUANTITY: 1

P-4143 STORK PEGASUS EVO IF-A/1850 ROTARY PRINTING MACHINE YEAR 2012 WIDTH 1850mm 8 COLORS

STORK
MODEL: EVO IF-A/1850
ROTARY PRINTING MACHINE
YEAR: 2012
MACHINE WIDTH: 2600mm
DRYER WIDTH: 4200mm
TOTAL LENGTH OF MACHINES: 8.6 + 10.4 METERS
FABRIC WIDTH: 1850mm
COLORS: 8
CHAMBERS OF THE DRYER: 6 FANS
4 NATURAL GAS HEATING BURNERS
MECHANICAL SPEED: 80m/min
MOTORS DRIVEN BY AC AND SERVO MOTORS
QUANTITY OF PUMPS
WITH BRUSHERS
220V/60HZ
DRYER MODEL: TRSG-1
YEAR: 2012
FABRIC/WOVEN OPENERS 2040
MAKE: E+L SWS 9681

QUANTITY: 1

P-4140 OSTHOFF ST80 GAS SINGEING MACHINE YEAR 1990 WIDTH 1800mm

OSTHOFF
TYPE: ST80
GAS SINGEING MACHINE
YEAR: 1990
WORKING WIDTH: 1800mm
ROLLER WIDTH: 1800mm
CONSISTING OF:
BEATING AND BRUSHING UNIT WITH FILTER FEED KF10
SINGEING UNIT WITH 2 BURNERS
BEATING AND BRUSHING UNIT
TYPE: V899
YEAR: 2001
DESIZING THROUGH WITH 5m CAPACITY
SQUEEZER MENZEL
BIG BATCHER
THE MACHINE WAS COMPLETELY OVERHAULED IN 2001 AND AT THE SAME TIME IT WAS EQUIPPED WITH A THREE-PHASE MOTOR

QUANTITY: 1

M-6247 OSTHOFF SP-80 SINGEING MACHINE YEAR 1980

SINGEING MACHINE
MAKE: OSTHOFF
MODEL: SP 80
YEAR: 1980
WORKING WIDTH: 1800mm TO 2000mm
(BURNER WIDTH 2400mm, ROLLER WIDTH INSIDE SINGEING BOX 2300mm)
ROLLER AND CYLINDER WIDTH AFTER SINGEING BOX 2100mm
FABRIC ENTRY WITH GUIDE ROLLERS AND TENSIONING DEVICE
OSTHOFF SINGEING MACHINE WITH 2 x DOUBLE JET BURNERS FOR FACE AND BACK SINGEING
DUST SUCTION FAN WITH EXHAUST
DESIZING TANK WITH 4 BOTTOM AND 4 TOP SS ROLLERS
1 x SS PREPARATION VESSEL
EXIT WITH PLAITER
3 TROLLEYS FOR THE FABRIC INCLUDED IN LINE
380V, 50HZ
UPGRADED ELECTRIC CONTROL BOX AND PB GAS DELIVERY UNITS

CONDITION: GOOD

QUANTITY: 1

K-3429 FOSTER AND WHEELER STEAM BOILERS A 100 T/ H AND 46.4 BAR YEAR 2005

MAKE: FOSTER AND WHEELER
YEAR 2005
2 X 100 TONS/H, 39 BAR WORKING PRESSURE AT 385C. DESIGNED PRESSURE IS 46.5 BAR
EMPTY WEIGHT 97 TONS
FURNACE VOLUME 104M3
HEATING FURNACE AREA 1125M2
ALL ACCESORIES INCLUDED
87% EFFICIENCY, FUEL OIL AND NATURAL GAS FIRED

QUANTITY: 2

K-2584 STANDARDKESSEL STEAM HEAT RECOVERY BOILER 25 T/H YEAR 1999

YEAR 1999
25 T/H
25 BAR
GERMAN RATES UNDER 150ppm NOX AND CO
SIEMENS CONTROL
ECO: 19 TO
BOILER BORE: 3.50M
BOILER LENGTH: 6.70M
WEIGHT: 60
INSUALATION: 200mm V2A III D
TURBINE EXHAUST GASES AND NATURAL GAS WITH EXTRA BURNER

QUANTITY: 1

K-2563 JENBACHER GAS ENGINES 1.64MW YEAR 1995

TYPE: JENBACHER JMS 616GS-NLC
FUEL: NATURAL GAS
1.64MW PLUS 2MW THERM. EACH
3 TRANFORMERS
3 HEAT EXCHANGERS
ELECTRIC
50 HZ
CONDITION: BETWEEN 45000 - 50000 RUNNING HOURS
FREQUENCY/COS PHI: 50 HZ / 0.8
ALTERNATOR VOLTAGE: 6.3
WITH ALL FULL
SERVICE REPORTS FROM THE MANUFACTURER
EXCELLENT CONDITION

QUANTITY: 3

K-2553 COMPLETE POWER PLANT 8.8MW YEAR 2005

WARTSILA W 20 V
8.8MW
11KV
INCLUDING 4 STEAM BOILERS WITH 13 BARS AND 4.7 T/H COOLERS AND TRANSFORMERS
NATURAL GAS FUEL
YEAR 2005
50 HZ
EXCELLENT CONDITION

QUANTITY: 4

M-3729 BEMATIC THERMOBONDING LINE, WIDTH 2500mm, YEAR 2012

THERMOBONDING LINE
MAKE: BEMATIC
YEAR: 2012
WIDTH: 2500mm

OFFER 001
BEMATIC AC-1500 BALE OPENERS

OFFER 002
BEMATIC AF-700 OPENER/MIXER

OFFER 003
BEMATIC BLOW SM-2000 FEEDING TOWER AND MIXER

OFFER 004
BEMATIC BCV VOLUMETRIC HOPPER FEEDER

OFFER 005
BEMATIC HI 91 CARD

OFFER 006
TEXNOLOGY EVOLUTION CROSSLAPPER

OFFER 007
BOMBI MECCANICA TFP/2N/3/FB OVEN

OFFER 008
BOMBI MECCANICA TG2.9/3 SLITTING AND CROSS-CUTTING UNIT

QUANTITY: 1 LINE