Search results for: 'Cylinder h'

REFERENCE NUMBER: R-4681 
SUCKER MULLER HACOBA SIZING MACHINE 
YEAR: 1999 
WORKING WIDTH: 1800mm
QUANTITY: 1 

Learn More

REFERENCE NUMBER: C-2257 SUCKER MÜLLER AND KARL MAYER ROTAL SIZING MACHINE COMPRISING OF WARP BEAM UNWINDING CREEL, YEAR: 1985 MODIFIED 2010 DETAILS: MAKER: SUCKER MÜLLER AND KARL MAYER ROTAL YEAR: 1985 YEAR MODIFIED: 2010 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-2526 ARIOLI STEAMER YEAR 1991 WIDTH 2400mm OIL HEATED ARIOLI STEAMER YEAR: 1991 2400mm CYLINDER WIDTH 300,000mm FABRIC CAPACITY OIL HEATED QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4038

BENNINGER ZELL MERCERIZER YEAR 2007 WIDTH 1800mm

 

BRAND: BENNINGER ZELL

MODEL YEAR: 2007

ROLLER WIDTH: 2000mm

WORKING WIDTH: 1800mm

TOTAL FABRIC QUANTITY: 160 METERS

SEARCH FOR PRE-WETTING AND IS LOCATED AT THE ENTRANCE TIGHTENING.

MERCERIZED PART: TWO-CHAN, ARE TIGHTENING INTERMEDIATE OUTPUT.

BENNINGER HAS BOMA CONTROL SYSTEM

STABILIZE KISMI : A CHAN , OUTPUT ARE TIGHTENING SEARCH

ELUTING FRACTION CAN OPERATE INDEPENDENTLY

THE MACHINE ONLY FOR THE PURPOSE OF DESTROYING THE AVAILABLE

ELECTRICAL PANEL HAS BEEN DESIGNED ACCORDINGLY BY BENNINGER

WASHING BOATS: FOUR PIECE, BENNINGER WASHING TECHNIQUES APPROPRIATE TO EACH, DOUBLE FABRIC PASS, SEARCH TOP SQUEEZE, INDIRECTLY HEATED, DIRECT WATER SUPPLY AND CHEMICALS SHOULD BE FED TWO BOAT.

EVERY BOAT OUT THERE IN THE FABRIC OPENING AND INTERMEDIATE CLAMPING UNITS HAVE.

THE LAST BOAT IS IN ITSELF CONSISTS OF TWO PARTS, THE BATHROOMS DO NOT MIX.

THE NEUTRALIZATION CAN BE PERFORMED IN THE LAST COMPARTMENT.

THERE ARE AUTOMATIC ACID DOSAGE UNIT.

THERE ARE 7.5 KN CLAMPING CYLINDER IN THE OUTPUT SECTION.

SEARCH SQUEEZED FABRIC FROM THE FABRIC CENTERING.

THROUGH THE WINDER UNIT IS WRAPPED IN THE DOCK

Learn More

REFERENCE NUMBER: M-0725 MONFORT STENTER MACHINE YEAR 2006 WIDTH 3200mm MONFORT STENTER YEAR 2006 8 CHAMBERS ROLLER WIDTH 3400mm WORKING WIDTH 3200mm HORIZONTAL PIN CLIP CHAIN QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-2239 BENNINGER WARPERS & LEMAIRE TRANSFER PRINT MACHINES FOR SALE 1 BENNINGER "BENTRONIC" SECTIONAL WARPER, WW 3800 MM, YOC 1999 1 BENNINGER SUPERTRONIC ELECTRONIC SECTIONAL WARPER, YOC 1994, WW 2600 MM 1 LEMAIRE ROLLING STATIC SGZ 791 TRANSFER PRINTING MACHINE, YOC 1992 WW 3200 MM 1 LEMAIRE ROLLINGSTATIC SMV - 178 TRANSFER PRINTING MACHINE, YOC 1993, WW 1800 MM QUANTITY AVAILABLE: 4 Learn More

REFERENCE NUMBER: T-6973 LAFER GRV-90 DUPLEX ITALY- DOUBLE DRUM RAISING MACHINE, WORKING WIDTH 1800mm LAFER GRV-90 DUPLEX ITALY- DOUBLE DRUM RAISING MACHINE CONDITION IS LIKE NEW WITH LOW WORKING HOURS/NEEDLES JUST NEWLY CHANGES 24 + 24 RAISING CYLINDERS WORKING WIDTH: 1800mm AC MOTORIZATION: 380V 50Hz + INVERTERS FOLDER AT EXIT BOTH MACHINES ARE STILL MANUFACTURING ON THE MILL FLOOR Learn More

EFFECTIVE WIDTH: 1600mm
DAILY OUTPUT: 10,000 KGS PER DAY
WEIGHT RANGE: 10 TO 150 GSM
FILAMENT DIAMETER: 1.6 TO 2.0 DENIER
SPEED: 350 TO 400 METERS PER MINUTE
RAW MATERIAL: POLYPROPYLENE (PP)
DIMENSIONS: 35,000 X 15,000 X 11,000mm
VOLTAGE: 380 VOLTS, 3 PHASE

CONSISTING OF:

SPUNBOND EQUIPMENT

PP VACUUM SUCTION MACHINE (2)
7800 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS PER HOUR
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
ACCURACY: 0.01%

EXTRUDER (2)
DIAMETER: 130mm
SINGLE SCREW (2)
HEATING SYSTEM: ELECTRICITY
MOTOR: 75 KW

MELT FILTRATION MACHINE (2)
PIPE SIZE: 50mm
FILTER AREA: 3.5 SQUARE METERS
MELT FLOW: 650 KGS PER HOUR
DOUBLE FILTRATION CHAMBER

MELTING PUMP (2)
40 RPM
FLOW CAPACITY: 400 KGS PER HOUR
POWER: 7.5 KW

SPINNING BEAM (2)
DIMENSIONS: 1900 X 256mm
HANGER TYPE MELT DISTRIBUTION
HEATING SYSTEM: OIL
WORKING TEMPERATURE: 200 TO 260 CELSIUS

SPINNERET (4)
HARDNESS: 30
SIZE: 1900mm LONG X 256mm WIDE
HOLE DIAMETER 0.45mm
HOLE QUANTITY: 6500 HOLE PER METER

QUENCHING UNIT (2)
WORKING TEMP: 20 CELSIUS
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
AIR PRESSURE: 6500
FILTER SIZE: 80#

FILAMENT DRAFT UNITS (2)
AIR PRESSURE: 5020PA
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
INSIDE TEMP: 10 TO 25 CELSIUS
FILAMENT FINENESS: 1.6 TO 2.0 DENIER

MELT BLOWN EQUIPMENT

VACUUM SUCTION MACHINE (2)
LOAD CAPACITY: 700 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS/H
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
4 HOPPERS
200 KGS HOPPER LOAD

EXTRUDER
DIAMETER: 105mm
SINGLE SCREW
MOTOR: 18.5 KW

MELT FILTER
DOUBLE CYLINDER
HYDRAULIC
MELT FLOW CAPACITY: 450 KGS/HR
FILTER SIZE: 150mm DIAMETER
ELECTRIC HEATING

MELTING PUMP
SPEED: 40 RPM
MELT FLOW CAPACITY: 450 KGS PER HOUR
POWER: 7.5 KW

MELT BLOWN DIE SPINNARET
SPINNERET HOLE SIZE: 0.32 TO 0.35mm
HOLE DISTANCE: 40 TO 42 PER INCH
FABRIC WEIGHT: 2 TO 200 GSM

HIGH PRESSURE AIR BLOWER
AIR FLOW CAPACITY: 70 TO 100 CUBIC METERS PER MINUTE
AIR PRESSURE: 100 KPA
POWER: 200 KW

WEB FORMING MACHINE
SPEED: 100 METERS PER MINUTE

ELECTRIC TREATMENT
VOLTAGE: 220 VOLTS, 50 Hz
INPUT CURRENT: 3A
OUTPUT VOLTAGE: 60 KV
TREAT WEB WIDTH: 1.6 METERS

HOT AIR HEATING MACHINE
WORKING TEMP: 350 CELSIUS
PRESSURE: 0.8 KPA
HEATING: ELECTRIC
POWER: 200 KW

THERMAL CALENDER
PROCESSING SPEED: 400 METERS PER MINUTE
ROLLER SIZE: 2000mm LONG, 520mm DIAMETER
EMBOSSING ROLLER: 1
LINEAR PRESSURE: 30 TO 125 N/mm
HEATING SYSTEM: OIL

HYDROPHILIC MACHINE
SPEED: 400 METERS PER MINUTE
FEEDING SYSTEM: DOUBLE KISSING ROLLER
KISS ROLLER DIAMETER: 215mm
LIQUID TANK: 200 KGS WITH HEAT/WARM AND MIX

DRYING SYSTEM:
INFRARED + HOT AIR
DRIVE ROLL SIZE: 150mm
HEATING EQUIPMENT: QUARTZ HEATER, HOT AIR BLOWER, EXHAUST AIR BLOWER

INSPECTION MACHINE
EFFECTIVE WIDTH: 1600mm
INSPECTION SPEED: 400 METERS PER MINUTE
INSPECT GSM: 10 TO 40 GSM

AUTOMATIC WINDING MACHINE
SPEED: 400 METERS PER MINUTE
ROLLER DIAMETER: 2000mm
ROLLER EXCHANGE SYSTEM: AUTOMATIC
FABRIC INSPECTOR: ONLINE
POWER: 15 KW

HIGH SPEED SLITTING MACHINE
PROCESS SPEED: 800 METERS PER MIN
ROLL DIAMETER: MAX 1500mm
SLITTING WIDTH: 80mm
PAPER TUBE SIZE: 76mm DIAMETER
AUTO TENSILE CONTROL: AVAILABLE ONLINE
METER COUNTING: AVAILABLE ONLINE

OIL HEATER (4)
HEATING POWER: 60 KW
MOTOR POWER: 7.5 KW
OIL PUMP FLOW: 30 CUBIC METERS PER SECOND
PRESSURE: 0.4 KPA

WATER CHILLER
DRIVE SYSTEM: SCREW
COOLING CAPACITY: 300,000 CALORIES
TEMP: 0 TO 20 CELSIUS
POWER: 110 KW

AIR BLOWER
SPEED: 1450 RPM
AIR BLOW CAPACITY: 12,000 CUBIC METERS PER HOUR
PRESSURE: 5200 PA
POWER: 30 KW x 3, 45 KW x 1

AIR COMPRESSOR
DRIVE SYSTEM: SCREW
PRESSURE: 0.8 KPA
POWER: 15 KW

HEATING SYSTEM: ELECTRIC
TEMP: 350 CELSIUS
HEATING TIME: 6 TO 8 HOURS
POWER: 4 KW

ULTRASONIC CLEANING MACHINE
3mm THICK
SIZE: 2000 X 500mm
FREQUENCY VIBRATION: 100 KHZ
TEMP: 40 CELSIUS

ELECTRONIC PANEL BOARD

PLATFORM

Learn More

SILICON COATED NOMEX FELT (ITB BRAND – ITALIAN)
BLANKET THICKNESS: 8mm
PNEUMATICALLY ADJUSTABLE FELT PRESSURE
MAXIMUM WORKING WIDTH: 2100mm (82.6”)
EVA HOT MELT FILM, FILM ROLL MIMIMUM 500 METERS, MAXIMUM 1000 METERS
36 KW HEATER RESISTANCE
MAIN DRUM DIAMETER: 500mm
TEFLON COATED MAIN CYLINDER
PNEUMATIC BLANKET EDGE CONTROL BY PHOTOCELL
WORKING SPEED: 5 TO 10 METERS PER MINUTE, DEPENDING ON FABRIC THICKNESS (THICK FABRIC IS SLOWER, NORMAL FABRIC IS FASTER)
PLC CONTROLLER WITH TOUCH SCREEN OPERATOR PANEL
PROGRAMMABLE HEATING UP AND COOLING DOWN
ROLL TO ROLL WORKING SYSTEM
SLITTING UNIT WITH 3 PIECE PNEUMATIC CUTTER AND DUAL CENTER REWINDING UNIT (OPTIONAL)
440 V 3-PHASE, 60 Hz, 55 AMP

LEAD TIME: 6 TO 8 WEEKS AFTER RECEIPT OF DEPOSIT

Learn More

REDUCES VOLUME FOR STORAGE AND TRANSPORTATION
USES COMPRESSED AIR AND PLASTIC COMPOSITE FILM BAGS FOR PACKAGING ITEMS AFTER COMPRESSION
EQUIPPED WITH AUTOMATIC TRANSMISSION TO COMPRESS AND FILM ITEMS UNINTERRUPTED
STANDARD MODEL EQUIPPED WITH ONE WORKSTATION WITH SINGLE SEAL (OPTIONAL ONE WORKSTATION WITH DOUBLE SEALS)
PLC TOUCH SCREEN OPERATION, USER FRIENDLY INTERFACE
CONSTANT TEMPERATURE CONTROL FUNCTION TO PREVENT BAG BURNS

VOLTAGE AND POWER: 220 V SINGLE-PHASE, 0.5 KW, 50 Hz
AIR PRESSURE: 0.4 – 0.8 MPA
PACKING CAPACITY: : 8 TO 12 ITEMS PER MINUTE
PRESS BOARD SIZE: LENGTH 700mm x WIDTH 900mm
MAXIMUM COMPRESSION THICKNESS: 500mm (AIR CYLINDER TRAVEL)
SEAL LENGTH: 880mm x 10mm
OVERALL DIMENSIONS: LENGTH 3390mm x WIDTH 940mm x HEIGHT 2010mm
POWER: 1.5 KW
NET WEIGHT: 350 KG
GROSS WEIGHT: 400 KG

QUANTITY: 1

Learn More