Search results for: 'reference number -v-'

C-2575 WARTSILA GENERATORS, YEAR 1994 TO 2012

ITEM 001
WARTSILA W 20V
MODEL: W 20V
OUTPUT (MW): 8.8
NATURAL GAS
COMPLETE POWER PLANT
11 KV
INCL. 4
STEAM BOILERS WITH 13 BAR
AND 4.7 T/H COOLERS
TRANSFORMERS
50 HZ
34 SG
YEAR: 2005
RUNNING HOURS: 50000
GOOD CONDITION

QUANTITY: 4

ITEM 002
WARTSILA W20
MODEL: W20
OUTPUT (MW): 8.7
DUAL FUEL ENGINES
50 HZ
V34 DF
YEAR: 2012
RUNNING HOURS: ZERO
NEW

QUANTITY: 6

ITEM 003
WARTSILA 8L32
MODEL: 8L32
OUTPUT (MW): 3.84
HFO ENGINE
YEAR: 2009
RUNNING HOURS: ZERO

QUANTITY: 6

ITEM 004
WARTSILA 33V16S6D
MODEL: 33V16S6D
OUTPUT (MW): 2
DIESEL ENGINE
50 HZ
YEAR: 1994
RUNNING HOURS: 7597

QUANTITY: 1

ITEM 005
WARTSILA SACM SDRG 150 V12 S4D
MODEL: SACM SDRG 150 V12 S4D
OUTPUT (MW): 0.53
DIESEL ENGINE
50 HZ
YEAR: 1996
RUNNING HOURS: 560

QUANTITY: 1

P-4837 MICHEL VAN DE WIELE AWM 51 LOOM YEAR 1999 WIDTH 4200mm 5 COLORS JACQUARD

MICHEL VAN DE WIELE
MODEL: AWM 51
YEAR: 1999
MAXIMUM WIDTH: 4200mm
REDDENSITY: 30
SPEED: 40
VOLTAGE: 400 V AC
BEAMSTAND TYPE: AUTOMATIC
BEAM DIAMETER: 1000mm
JACQUARD TYPE: PTX, 6100 HOOKS
5 COLORS

QUANTITY: 1

REFERENCE NUMBER: M-3707

VAMATEX P1001 SUPER EK LOOMS YEAR 2002 WIDTH 1900mm – DOBBY – 8 AND 12 COLORS

VAMATEX

MODEL P1001 SUPER EK

YEAR 2002

WIDTH 1900mm

DOBBY FIMTEXTILE RD860

SHAFTS INSTALLED: 20

8 COLORS

1 LOOM WITH 12 COLORS

3 LOOMS WITH DOUBLE BEAM (1 BEAM UP & 1 BEAM DOWN)

WITH ELECTRONIC COLOR SELECTOR AS OF LEONARDO LOOMS (BLACK)

490 RPM

ACCESSORIES WITH EACH LOOM:

4 FEEDERS: 9 FRAMES

5000 HEDDLES + 1.5 DOWN BEAMS

1 UP BEAM FOR EACH LOOM WITH DOUBLE BEAMS

TOTAL 10 CLOTH ROLLERS WITH 8 LOOMS

QUANTITY: 8

REFERENCE NUMBER: K-8416

G1 TONELLO 330 "CENTRIFUGING" INDUSTRIAL WASHING MACHINE-USED

G1 TONELLO 330

“CENTRIFUGING” INDUSTRIAL WASHING MACHINE

FRONTAL TYPE

FOR CHEMICAL “STONE WASH”

CAPACITY LIT. 3.300

MOD. TONELLO G1 330

GENERAL DESCRIPTION:

TONELLO G1 IS A MACHINE WITH HIGH-SPEED HYDRO-EXTRACTION (600 R.P.M.) AND IT IS EQUIPPED WITH AUTOMATIC SELF-BALANCING SYSTEM

TONELLO G1 IS SUPPLIED WITH “SETTABLE INVERTER”

ROTATION SPEED FROM 0 TO 55 R.P.M

ALSO SETTING THE CENTRIFUGING SPEED FROM 0 TO 600 R.P.M.

WITH TIME OF CENTRIFUGE PROGRAMMABLE BY INDUSTRIAL PC

THE ACCESS MAIN DOOR TO THE DRUM IS VERY WIDE, IN ORDER TO EASY GARMENTS LOADING AND UNLOADING OPERATION

OPENING AND CLOSING ARE PNEUMATIC

DOUBLE TILTING SYSTEM FOR GARMENTS LOADING AND UNLOADING

DRIVING SYSTEM IS SITUATED ON THE UPPER PART OF THE MACHINE

WITH PROPER MATERIAL AND MOTORS SUITABLE TO WORK AT LOW AND HIGH R.P.M.

1 TANK FOR THE PREPARATION OF AUXILIARY PRODUCTS WITH CAPACITY OF LITTERS 180 EQUIPPED WITH ELECTRO-PUMP AND PNEUMATIC VALVES FOR THE SENT ONE

THE DRAINAGE IN DRAIN AND AUTOMATIC RINSES N° 2 WATER INLETS COMPLETE WITH PNEUMATIC VALVE- MECHANICAL WATER-COUNTER DIRECT HEATING AND COOLING SYSTEM

AUTOMATION WITH MICROPROCESSOR

TECHNICAL DATA TONELLO G1 330

DRUM DIMESION                           

-DRUM HOLING SHEET                                   mm                        4

THICKNESS         

-DIAMETER                                                   MM                       1900

-DEPTH                                                        MM                       1150

-VOLUME                                                      LT.                       3300

-DOOR DIAMETER                                           MM                       1020

-MAXIMUM LOADING                                        KG.                      120/130

CAPACITY           

BASKET SPIN SPEED                                        RPM                      0-600

DIRECT STEAM CONNECTION                               Ø                        1" 1/4

WATER INLET CONNECTION                                 Ø                        2 x 2

COMPRESSED AIR INLET                                     Ø                        1/4"

CONNECTION   

STEAM IN MAXIMUM PRESSUREBAR                      BAR                       6

WATER IN MAXIMUM PRESSURE                           BAR                       4

COMPRESSED AIR IN MAXIMUM                           BAR                       8

PRESSURE          

POWER INSTALLED                                           KW                        22

3-PHASE VOLTAGE                                           VOLT/HZ                 400/50

PRODUCTS TANK Ø 240 H 400                             LT.                         80

TANK RINSING VALVE                                         Ø                         1/2"

MACHINE SIZE                  

-WIDTH                                                          MM                        2500

-WIDTH WITH ELECTRICAL PANEL                         MM                        2980

-DEPTH                                                           MM                        2710

-HEIGHT                                                          MM                        3000

REFERENCE NUMBER: M-4086

EDGE SAW E-3 VERTICAL SLITTER

EDGE SAW VERTICAL SLITTER

MODEL: E-3

HEIGHT FROM TABLE TO TOP NECK (BLADE HEIGHT): APPROXIMATELY 53” INCHES

TABLE SIZE: (LENGTH: 137” INCHES) (WIDTH: 72” INCHES)

TABLE SIZE: (LENGTH: 137” INCHES) (WIDTH: 49” INCHES)

RAILS APPROXIMATELY 20 FEET LONG

THE MACHINE IS DISMANTLED

Distance from blade to neck is 72 inches

QUANTITY: 1

REFERENCE NUMBER: C-3910

VAMATEX DYNA TERRY, WORKING WIDTH 2600mm, YEAR 2003, JACQUARD, 8 COLORS

DETAILS:

VAMATEX DYNA TERRY

WORKING WIDTH: 2600mm

YEAR: 2003
8 COLORS
ELECTRONIC JACQUARD STAUBLI CX 870 2688 HOOKS
10600 TO 16400 ENDS
4 WEFT FEEDERS ROJ WITH CRELL
1.5 UPPER BEAM DIAMETER: 1000mm
1.5 DOWN BEAM DIAMETER: 800mm
1.5 CLOTH ROLLER
6500 DROPPERS

6500 HEDDLES

QUANTITY: 10

REFERENCE NUMBER: M-6249
LECTRA VECTOR 5000 AUTOMATED CUTTING MACHINE YEAR 1994

AUTOMATED CUTTING MACHINE
MAKE: LECTRA
MODEL: VECTOR 5000
YEAR: 1994

QUANTITY: 1

REFERENCE NUMBER: M-6243
LECTRA VECTOR MH AUTOMATED CUTTING MACHINE YEAR 2008 WIDTH 2200mm

AUTOMATED CUTTING MACHINE
MAKE: LECTRA
MODEL: VECTOR MH
YEAR: 2008
MAXIMUM CUTTING LENGTH: 20000mm (787.4 IN)

QUANTITY: 1

C-4227 EREMA RM120TVE FILM/FIBER PELLETIZING LINE, EXTRUDER 120mm, YEAR 2000 - NEW

EREMA PELLETIZING LINE NEW
MODEL: RM120TVE FILM/FIBER
YEAR: 2000
LINE CONSISTS OF THE FOLLOWING:
EREMA MODEL RM120TVE
120mm EXTRUDER WITH 36/1 L/D DOUBLE VENTED BARREL
EXTRUDER IS DRIVEN BY A 160KW AC MOTOR WITH INVERTER
DOUBLE VENT INCLUDES A STAINLESS STEEL DEKER VACUUM PUMP
APPROXIMATELY 50 CUBIC FOOT STAINLESS STEEL CUTTER/COMPACTOR MOUNTED AT FEED SECTION
AND FED BY A 35″ WIDE X 20′ LONG INCLINED BELT CONVEYOR
CUTTER COMPACTOR DRIVEN BY A 105 KW
480 VOLT AC MOTOR

QUANTITY: 1 LINE

C-4005 PACTEC NAGEMA EW10 CUT & VIENNA FOLD TYPE BONBON WRAPPER, WIDTH 16 TO 18mm, YEAR 1990

YEAR: 1990
300/MIN
WITH BATCH ROLLER & ROPE SIZER
REFURBISHED
PRODUCT DIMENSIONS
LENGTH: 25 TO 35mm
WIDTH: 16 TO 18mm

QUANTITY: 1