Search results for: 'A-26'

REFERENCE NUMBER: T-6552

MASK AIR TIGHTNESS TESTER

MASK AIR TIGHTNESS TESTER

HOW TO CHOOSE A HIGH-QUALITY MASK NOT ONLY DEPENDS ON THE FILTERING EFFICIENCY OF THEMASK, BUT ALSO TO CONFIRM WHETHER THE MASK IS COMPLETELY IN CONTACT WITH THE FACE, OTHERWISE AEROSOL PARTICLES SUCH AS GERMS THAT HAVE NOT BEEN FILTERED BY THE MASK WILL BE INHALED FROM THE INADEQUATE ADHESION. THEREFORE, IT IS VERY IMPORTANT TO CHECK THE WEARING STATUS OF THE MASK. THE EUROPEAN AND AMERICAN COUNTRIES HAVE LISTED THE APPLICATION TEST OF THE MASK AS A STRONG INSPECTION ITEM.

FOR EXAMPLE, THE N95 MASK IS ONE OF 9 TYPES OF PARTICULATE PROTECTIVE MASKS CERTIFIED BY NIOSH (NATIONAL INSTITUTE OF OCCUPATIONAL SAFETY AND HEALTH). "N" INDICATES OIL RESISTANCE."95" INDICATES THAT THE PARTICLE CONCENTRATION IN THE MASK IS MORE THAN 95% LOWER THAN THAT OF THE PARTICLES OUTSIDE THE MASK WHEN EXPOSED TO THE SPECIFIED NUMBER OF SPECIAL TEST PARTICLES. N95 IS NOT A SPECIFIC PRODUCT NAME, AS LONG AS IT MEETS THE N95 STANDARD AND PASSES THE NIOSH REVIEW, IT CAN BE CALLED "N95 MASK".

N95 TYPE MASKS, IN ADDITION TO THE FILTERING EFFICIENCY OF THE MASKS, THE CLOSENESS OF THE MASKS TO THE FACE IS ONE OF THE IMPORTANT FACTORS THAT DETERMINE THE EFFECTIVENESS OF THE USE OF THE MASKS. THE SUITABILITY OF DIFFERENT TYPES OF MASKS FOR THE HUMAN FACE VARIES GREATLY.

THEREFORE, BEFORE USING A MASK, THE SUITABILITY OF THE MASK SHOULD BE CHECKED FIRST. DURING THETIGHTNESS TEST OF THE WEARER'S FACE, ENSURE THAT AIR CAN PASS IN AND OUT THROUGH THE MASK WHEN IT IS CLOSE TO THE EDGE OF THE FACE. THE MASK TIGHTNESS TESTER CAN QUICKLY COMPLETE THE TIGHTNESS TEST OF RESPIRATORS SUCH AS MASKS TO ENSURE THAT IT PROVIDES GOOD PROTECTION PERFORMANCE. IT CONFORMS TO THE CHINESE RESPIRATOR STANDARD GB2626-2019 STANDARD, OSHA / CSA STANDARD AND CHINA GENERAL ADMINISTRATION OF QUALITY SUPERVISION, INSPECTION AND QUARANTINE "GB 19083-2010 TECHNICAL REQUIREMENTS FOR MEDICAL PROTECTIVE MASKS" JOINTLY ISSUED BY THE CHINA NATIONAL STANDARDIZATION ADMINISTRATION COMMITTEE.

ADHESION (SUITABILITY TEST): THE MASK DESIGN SHOULD PROVIDE GOOD ADHESION. THE OVERALL FIT FACTOR OF THE MASK SHOULD NOT BE LESS THAN 100. THIS TEST THE REQUIREMENTS WERE FORMALLY IMPLEMENTED ON AUGUST 1, 2011.

MAINLY USED FOR VISUAL FIELD TESTING OF MASKS AND RESPIRATORS, WHICH IS USEFUL FOR MASK AND RESPIRATOR MANUFACTURERS, QUALITY SUPERVISORS, SCIENTIFIC RESEARCH, AND FOR TESTING PRIOR TO SELLING MASKS.

FEATURES:
1. THE EQUIPMENT IS COMPOSED OF A SEMI-ARC BOW, RECORDING DEVICE, SEAT FRAME AND TEST HEAD DIE.
2. SEMI-ARC BOW: THE RADIUS IS 300 TO 340 mm
CAN BE ROTATED AROUND THE HORIZONTAL RADIUS PLANE PASSING THROUGH THE POINT 0°, AND A SCALE EXTENDING TO THE 90° ARC BOW EVERY 5° FROM 0° ON BOTH SIDES, EQUIPPED WITH SLIDING WHITE VISUAL STANDARD.
3. RECORDING DEVICE: THE RECORDING NEEDLE IS CONNECTED WITH THE VISUAL STANDARD THROUGH COMPONENTS SUCH AS AXLE WHEEL, AND THE DIRECTION AND ANGLE OF THE VISUAL STANDARD ARE RECORDED ON THE VISUAL FIELD DRAWING CORRESPONDINGLY.
4. SEAT FRAME: USED TO SUPPORT SEMI-CIRCULAR ARC BOW AND FIXED RECORDING DEVICE.
5. TEST THE HEAD MOLD: A STANDARD HEAD MOLD, THE TWO EYE HOLES OF THE HEAD MOLD ARE EQUIPPED WITH SMALL LIGHT BULBS, THE POSITION OF THE BULB AND THE POSITION OF THE HEAD MOLD ARE ACCORDING TO THE REQUIREMENTS OF GB 2890. THE TEST HEAD DIE MUST BE INSTALLED ON THE WORKBENCH IN SUCH A WAY THAT THE LEFT AND RIGHT EYES ARE PLACED AT THE CENTER OF THE SEMICIRCULAR ARCH AND THE "0" POINT IS DIRECTLY SEEN.

MAIN INDICATORS
1. SEMI-CIRCULAR ARC RADIUS: 335mm.
2. LEFT AND RIGHT FIELD OF VIEW: ≤120°.
3. BULB DISTANCE: THE VERTEX OF THE BULB IS CONNECTED AFTER THE TWO EYE POINTS (7±0.5).
APPLICABLE STANDARDS: GB/T 32610-2016, GB 2626-2019, GB2890-2009

EFFECTIVE WIDTH: 1600mm
DAILY OUTPUT: 10,000 KGS PER DAY
WEIGHT RANGE: 10 TO 150 GSM
FILAMENT DIAMETER: 1.6 TO 2.0 DENIER
SPEED: 350 TO 400 METERS PER MINUTE
RAW MATERIAL: POLYPROPYLENE (PP)
DIMENSIONS: 35,000 X 15,000 X 11,000mm
VOLTAGE: 380 VOLTS, 3 PHASE

CONSISTING OF:

SPUNBOND EQUIPMENT

PP VACUUM SUCTION MACHINE (2)
7800 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS PER HOUR
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
ACCURACY: 0.01%

EXTRUDER (2)
DIAMETER: 130mm
SINGLE SCREW (2)
HEATING SYSTEM: ELECTRICITY
MOTOR: 75 KW

MELT FILTRATION MACHINE (2)
PIPE SIZE: 50mm
FILTER AREA: 3.5 SQUARE METERS
MELT FLOW: 650 KGS PER HOUR
DOUBLE FILTRATION CHAMBER

MELTING PUMP (2)
40 RPM
FLOW CAPACITY: 400 KGS PER HOUR
POWER: 7.5 KW

SPINNING BEAM (2)
DIMENSIONS: 1900 X 256mm
HANGER TYPE MELT DISTRIBUTION
HEATING SYSTEM: OIL
WORKING TEMPERATURE: 200 TO 260 CELSIUS

SPINNERET (4)
HARDNESS: 30
SIZE: 1900mm LONG X 256mm WIDE
HOLE DIAMETER 0.45mm
HOLE QUANTITY: 6500 HOLE PER METER

QUENCHING UNIT (2)
WORKING TEMP: 20 CELSIUS
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
AIR PRESSURE: 6500
FILTER SIZE: 80#

FILAMENT DRAFT UNITS (2)
AIR PRESSURE: 5020PA
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
INSIDE TEMP: 10 TO 25 CELSIUS
FILAMENT FINENESS: 1.6 TO 2.0 DENIER

MELT BLOWN EQUIPMENT

VACUUM SUCTION MACHINE (2)
LOAD CAPACITY: 700 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS/H
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
4 HOPPERS
200 KGS HOPPER LOAD

EXTRUDER
DIAMETER: 105mm
SINGLE SCREW
MOTOR: 18.5 KW

MELT FILTER
DOUBLE CYLINDER
HYDRAULIC
MELT FLOW CAPACITY: 450 KGS/HR
FILTER SIZE: 150mm DIAMETER
ELECTRIC HEATING

MELTING PUMP
SPEED: 40 RPM
MELT FLOW CAPACITY: 450 KGS PER HOUR
POWER: 7.5 KW

MELT BLOWN DIE SPINNARET
SPINNERET HOLE SIZE: 0.32 TO 0.35mm
HOLE DISTANCE: 40 TO 42 PER INCH
FABRIC WEIGHT: 2 TO 200 GSM

HIGH PRESSURE AIR BLOWER
AIR FLOW CAPACITY: 70 TO 100 CUBIC METERS PER MINUTE
AIR PRESSURE: 100 KPA
POWER: 200 KW

WEB FORMING MACHINE
SPEED: 100 METERS PER MINUTE

ELECTRIC TREATMENT
VOLTAGE: 220 VOLTS, 50 Hz
INPUT CURRENT: 3A
OUTPUT VOLTAGE: 60 KV
TREAT WEB WIDTH: 1.6 METERS

HOT AIR HEATING MACHINE
WORKING TEMP: 350 CELSIUS
PRESSURE: 0.8 KPA
HEATING: ELECTRIC
POWER: 200 KW

THERMAL CALENDER
PROCESSING SPEED: 400 METERS PER MINUTE
ROLLER SIZE: 2000mm LONG, 520mm DIAMETER
EMBOSSING ROLLER: 1
LINEAR PRESSURE: 30 TO 125 N/mm
HEATING SYSTEM: OIL

HYDROPHILIC MACHINE
SPEED: 400 METERS PER MINUTE
FEEDING SYSTEM: DOUBLE KISSING ROLLER
KISS ROLLER DIAMETER: 215mm
LIQUID TANK: 200 KGS WITH HEAT/WARM AND MIX

DRYING SYSTEM:
INFRARED + HOT AIR
DRIVE ROLL SIZE: 150mm
HEATING EQUIPMENT: QUARTZ HEATER, HOT AIR BLOWER, EXHAUST AIR BLOWER

INSPECTION MACHINE
EFFECTIVE WIDTH: 1600mm
INSPECTION SPEED: 400 METERS PER MINUTE
INSPECT GSM: 10 TO 40 GSM

AUTOMATIC WINDING MACHINE
SPEED: 400 METERS PER MINUTE
ROLLER DIAMETER: 2000mm
ROLLER EXCHANGE SYSTEM: AUTOMATIC
FABRIC INSPECTOR: ONLINE
POWER: 15 KW

HIGH SPEED SLITTING MACHINE
PROCESS SPEED: 800 METERS PER MIN
ROLL DIAMETER: MAX 1500mm
SLITTING WIDTH: 80mm
PAPER TUBE SIZE: 76mm DIAMETER
AUTO TENSILE CONTROL: AVAILABLE ONLINE
METER COUNTING: AVAILABLE ONLINE

OIL HEATER (4)
HEATING POWER: 60 KW
MOTOR POWER: 7.5 KW
OIL PUMP FLOW: 30 CUBIC METERS PER SECOND
PRESSURE: 0.4 KPA

WATER CHILLER
DRIVE SYSTEM: SCREW
COOLING CAPACITY: 300,000 CALORIES
TEMP: 0 TO 20 CELSIUS
POWER: 110 KW

AIR BLOWER
SPEED: 1450 RPM
AIR BLOW CAPACITY: 12,000 CUBIC METERS PER HOUR
PRESSURE: 5200 PA
POWER: 30 KW x 3, 45 KW x 1

AIR COMPRESSOR
DRIVE SYSTEM: SCREW
PRESSURE: 0.8 KPA
POWER: 15 KW

HEATING SYSTEM: ELECTRIC
TEMP: 350 CELSIUS
HEATING TIME: 6 TO 8 HOURS
POWER: 4 KW

ULTRASONIC CLEANING MACHINE
3mm THICK
SIZE: 2000 X 500mm
FREQUENCY VIBRATION: 100 KHZ
TEMP: 40 CELSIUS

ELECTRONIC PANEL BOARD

PLATFORM

A. SEMI-AUTOMATIC N95 FACE MASK MACHINE
30 TO 45PCS/MIN
MAXIMUM ROLL DIAMETER: 600mm
NUMBER OF ROLLS FEEDING THE MACHINE: 4 ROLLS OR 4 LAYERS
WIDTH OF THE ROLL: 230mm
TOTAL KW OF THIS MACHINE: 3KW
FREQUENCY (KHZ) OF THE ROTARY ULTRASONIC DIE: 15KHZ 2600W
DIAMETER OF THE ROTARY DIE: 74mm
FLOOR SPACE DIMENSIONS OF THIS MACHINE: 3000mm X 1500mm
MACHINE WEIGHT: 400KGS
PACKING DIMENSIONS OF THE MACHINE: 1600mm X 1000mm X 1700mm(L X W X H)
HEIGHT OF THE MACHINE: 1960mm

B. N95 EARLOOP MACHINE
15 TO 20PCS/MIN
NUMBER OF PAIRS OF EAR LOOPS DONE PER MINUTE: 15 TO 20PCS/MIN
FLOOR SPACE DIMENSIONS OF THE MACHINE: 1200mm X 1000mm
MACHINE WEIGHT: 350KGS
PACKING DIMENSIONS OF THE MACHINE: 1200mm X 1000mm X 1500mm(L X W X H)
HEIGHT OF THE MACHINE: 1300mm
SPOT WELDING IS USED TO ADHERE THE CLIP TO THE MESK. NO GLUE IS USED.

C. N95 SEALING MACHINE
15 TO 20PCS/MIN
TOTAL KW OF THE MACHINE: 20K 2600W
FREQUENCY (KHZ) OF THE ROTARY ULTRASONIC DIE: 20K
FLOOR SPACE DIMENSIONS OF THE MACHINE: 600mm X 600mm
MACHINE WEIGHT: 100KGS
PACKING DIMENSIONS OF THE MACHINE: 700mm X 700mm X 1300mm (L X W X H)
HEIGHT OF THE MACHINE: 1200mm

D. N95 NOSE CLIP MACHINE
15 TO 20PCS/MIN
15 TO 20PCS/MIN
SEE VIDEO OF HOW THE CLIOP IS ATTACHED TO THE MASK.
DIMENSIONS OF THE MACHINE: 500mm X 500mm
WEIGHT OF THE MACHINE: 20KGS
https://youtu.be/4IGKM5TxsqY 

PACKED: IN ONE WOODEN CASE,
PACKAGE SIZE: 2000mm X 1500mm X 1900mm (L X W X H),
GROSS WEIGHT: ABOUT 1000KGS
WARRANTY OF MACHINE:1.5 YEARS
LEAD TIME IS 12 DAYS AFTER ORDER IS CONFIRMED

1. 5 ROLLS – CK6658 – RELIC – 115 YARDS
2. 13 ROLLS – CK6270 – 210 YARDS
3. 3 ROLLS – QUARUM LAMPE GREY – 92374 – 192.47 YARDS
4. 5 ROLLS – ORELAND BLACK STEELE – 344.80 YARDS
5. 8 ROLLS – CK5259 + 3 ROLLS – 125 YARDS
6. 2 ROLLS – WORLD LUX – CK7149 – 50 YARDS
7. 12 ROLLS – WORLD LUX – CK7150 – 250 YARDS ??
8. 6 ROLLS – VICTOR ELAS STEEL/NAT/BLK – D370942 – 186 YARDS
9. 2 ROLLS – EVA BAS/NAT/BLK – D370916 – 107.8 YARDS
10. 2 ROLLS – BLUE – PNL – CK5970 – 45 YARDS
11. 4 ROLLS – GREY – 10028 – 65 YARDS
12.
13. 3 ROLLS – QUARUM LAMPE BLUE – 92331 – 224.53 YARDS
14. 3 ROLLS – W272 EGGSHELL – 945094 – 300 YARDS
15. 6 ROLLS – W272 SILVER – 945100 – 150 YARDS
16.
17. 5 ROLLS – CREATIVE CT 15118 – 50 YARDS
18. 4 ROLLS – CREATIVE NAT/BLK/BET SILVER- CT0481 – 85 YARDS
19.
20.
21.
22.
23. 6 ROLLS – LORI WHITE – DUNCAN – DT002 – 270 YARDS
24. 5 ROLLS – ‘YC’ CK6054 – 25 YARDS
25. 2 ROLLS – POTTSTOWN GOLD – 120.4 YARDS
26. 3 ROLLS- MOET SOFT PLATINUM W7461 – 30 YARDS
27.
28.
29. 5 ROLLS – BORDEUX BE PORT – W5087 – 50 YARDS
30. 4 ROLLS – NATURAL NEW COOL THERAPY – CK 7240 – 127.30 YARDS
31. 2 ROLLS – NATURES DREAM – CK7247 – 65.7 YARDS
32.
33.
34. 3 ROLLS – YASMINE DIAMOND/NATURAL – M3929 – 49 YARDS
35.
36.
37. 3 ROLLS – KENDALL SILVERY – BLUE/ NATURAL BAMBOO – M3961- 50 YARDS
38. 5 ROLLS – LEGACY BLUE – CK6162 – 178.5 YARDS
39.
40. 21 ROLLS – CK7592 – 177 YARDS
41. 11 ROLLS – NEW WORLD LUXURY – CK7453 – 1 – 102.2 YARDS
42. 2 ROLLS- MAVIME STORM/NAT/SLATE FACE – M4148 – 57 YARDS
43. 4 ROLLS – LEGACY ETTA/FLEX PANEL – CK7595 – 80 YARDS
44. 8 ROLLS – LEGACY JB/CRADLE – CK7593 – 263.7 YARDS
45.
46. 1 ROLL – LAMERO RD ‘LA COLLECTION’ - TN43175 – L4189 – 48 YARDS
47. 1 ROLL – BLUE NEW – BLUE HOSTESS – CK7141 – 30 YARDS
48. 26 ROLLS – IRON SWART ACCTIK – MT 100252 – 726.40 YARDS
49. 26 ROLLS – EE SPAMDEX – MT 100095 – 727.20 YARDS
50.
51.
52. 10 ROLLS – CAROLYN 500 GR/M2 LAMPE – 353.05 YARDS
53. 3 ROLLS – JUDY CHARCOAL GREY – LAMPE – 100.52 YARDS
54. 3 ROLLS – CK7385 – 92 YARDS
55.
TOTAL: 6,173.57

NOT ON LIST
1. MO6317 EXCALIBUR – 564.10 YARDS
2. RED HILL – DAYBREAK – 597.30 YARDS
3. SURYA M4234 – STORM-MANGO SLATE – 450 YARDS ??
4. SO526CI – DIAMOND NATURAL – EXCEPTIONAL – 105 YARDS
5. M3781 – NORMAND
6. DK961T NATIO1048 CULP ‘WORLD’
7. CT1710 – TT3 – DIAMOND DREAMZZ
TOTAL: 1,716.40

PUT RED TAGS ON UNKNOWN ROLLS

GRAND TOTAL : 7,889.97 YARDAGE

SABA AQUABON 3361-264 GALLON TOTE
QUANTITY: 190

SABA ACTIVATOR 3914-273 GALLON TOTE
QUANTITY: 500

SPUNFAB ADHESIVE 415LPA/1
QUANTITY: 4,250

LAW LABEL-MATT,BS,FD
QUANTITY: 28,641

I-410XLW (#738G) TWIN XL/FULL XL INSTAMATIC FRAME 4 LEGS
NEED COUNT

I-PK465 (#777G) KING/CK INSTAMATIC FRAME 6 LEGS
NEED COUNT

I-34G TWIN/FULL INSTAMATIC FRAME 4 LEGS
NEED COUNT

#666 (J6MB66) 6/6 ALL STEEL BED BASE 6”
NEED COUNT

576 #140/76 HOOK-ON 76” RAIL
NEED COUNT

575 #145/75 BOLT-ON 76” RAIL
NEED COUNT

582 Q/K HOOK-ON 82” RAIL (5/0 & , XL)
NEED COUNT

581 Q/K BOLT-ON 82” RAIL MANUTA
NEED COUNT

ROLLED MATTRESS OUTPUT DIAMETER: MINIMUM 250mm, MAXIMUM 500mm

ITEM 001
AUTOMATIC MATTRESS FILM & COMPRESSION MACHINE
PRESSURE PLATE DIMENSIONS: 2300mm x 2200mm
WORKING PRESSURE: 100 TONS
OPENING CLEARANCE: 500mm
OIL CYLINDERS: 4
AIR CYLINDERS: 19
CONVEYOR BELTS: 2
TOTAL POWER: 14.8 KW
EXTERNAL DIMENSIONS: 6530mm x 3200mm x 2700mm
VOLTAGE: 220 VOLTS, 60 Hz (OR AS PER CUSTOMER)
QUANTITY: 1

ITEM 002
ROTATING TABLE
OVER SIZE: 3170mm x 2040mm x 950mm
WEIGHT: 1500 KG
VOLTAGE: 220 VOLTS, 60 Hz (OR AS PER CUSTOMER)
POWER: 0.75 KW
QUANTITY: 1

ITEM 003
FOLDING TABLE SIZE
OVER SIZE: 2910mm x 2750mm x 2350mm
WEIGHT: 2500 KG
POWER: 2.75 KW
VOLTAGE: 220 VOLTS, 60 Hz (OR AS PER CUSTOMER)
QUANTITY: 1

ITEM 004
AUTOMATIC ROLLING MACHINE
MATTRESS SIZE: 2000 x 2200mm
OVER SIZE: 2600mm x 3500mm x 2900mm
WEIGHT: 6000 KG
DIAMETER: 250 TO 500mm
POWER: 19 KW
VOLTAGE: 220 VOLTS, 60 Hz (OR AS PER CUSTOMER)
QUANTITY: 1

TOTAL POWER: 37.3 KW

GENERAL INFORMATION: 
CAPACITY: 1 PIECE PER MINUTE
FOAM DENSITY: ≥25 kgs/m3 , ≥45kgs/m3
WEIGHT: 15,000 KG
VOLUME: 80 m3

IF SPACE FOR MATTRESS PLACEMENT IS ADDED, THE TOTAL SIZE REQUIRED FOR THE ENTIRE MACHINE IS: LENGTH 20 METERS x WIDTH 4 METERS x HEIGHT 3.5 METERS

REQUIRES TWO 40-FOOT HIGH CUBE CONTAINERS TO SHIP

Video 1: https://www.youtube.com/watch?v=c5xzLBf2uLs
Video 2: https://www.youtube.com/watch?v=__9A5sQxqtc
Video 3: https://www.youtube.com/watch?v=bT2zlMYOg-s
Video 4: https://www.youtube.com/watch?v=R-68eSQby0M

FLATTEN ALL TYPES OF MATTRESSES AND ROLL UP THE FLAT POCKET SPRING MATTRESSES.

FLATTENING AND ROLLING MATTRESSES HAS THE ADVANTAGE OF MINIMIZING THE STORAGE AREA AND

FACILITATE THE TRANSPORTATION AND LOWER TRANSPORTATION COSTS.

PRODUCTION CAPACITY:  3 MATTRESSES PER MINUTE FOR NORMAL PACKING.

MATTRESS SIZE: MIN. 700 X 1900mm TO MAX. 2100 X 2100mm

MATTRESS HEIGHT: 50mm TO 400mm

PRESSING SYSTEM: PNEUMATIC FOR NORMAL PACKING, HYDRAULIC SYSTEM FOR FLATTENING AND ROLL PACKING

PNEUMATIC PRESSURE: 482 KGS (8 BARS)

HYDRAULIC PRESSURE: 65 TON

WIDTH OF FILM ROLLS: MIN. 2200 mm TO MAX. 2650 mm

MAX. DIAMETER OF FILM ROLLS: 320mm

MAX. WEIGHT OF FILM ROLLS: 200 KGS

TYPE OF NYLON: PE FILM

THICKNESS OF FILM: 50 TO 150 MICRON (5 TO 15)

POWER REQUIREMENTS: 3 PHASE 380 V OR AS PER CUSTOMER

TOTAL ELECTRIC DRAW: 20 KW

WEIGHT: APPROX. 10 TONS

NUMBER OF OPERATORS: 1

QUALITY STANDARD: CE

WARRANTY: 2 YEARS

FINAL ROLL PACKING TUBE DIAMETER: 250 TO 400 mm

YouTube Video 1: https://youtu.be/7e3-3FtaQdE

YouTube Video 2: https://youtu.be/LrmcQ18A1zM

QUANTITY: 1

R-7391 BEMATIC BOMBI NONWOVEN CARDLINE AND OVEN, 2500mm,  YEAR 2005

BRAND BEMATIC
MODEL BOMBI
YEAR 2005
STATUS AVAILABLE
BEMATIC - BOMBI NONWOVEN
2 BALE HOLES, 1 OPENING ROLL, 1 OPENER
1 CARD HERGETH 2500mm, 1.5 PHASES
1 CROSS TAPPER 2500mm
1 BOMBI OVEN, 3 LAYERS, 10 M LONG, 2600mm WIDTH
3 WEISHAUPT BURNERS
1CUTTING MACHINE, 4 HORIZONTAL KNIVES
1 ROLLING MACHINE
1 SCALE
1 PACKING MACHINE THE LINE IS IN EXCELLENT TECHNICAL CONDITION

P-4143 STORK PEGASUS EVO IF-A/1850 ROTARY PRINTING MACHINE YEAR 2012 WIDTH 1850mm 8 COLORS

STORK
MODEL: EVO IF-A/1850
ROTARY PRINTING MACHINE
YEAR: 2012
MACHINE WIDTH: 2600mm
DRYER WIDTH: 4200mm
TOTAL LENGTH OF MACHINES: 8.6 + 10.4 METERS
FABRIC WIDTH: 1850mm
COLORS: 8
CHAMBERS OF THE DRYER: 6 FANS
4 NATURAL GAS HEATING BURNERS
MECHANICAL SPEED: 80m/min
MOTORS DRIVEN BY AC AND SERVO MOTORS
QUANTITY OF PUMPS
WITH BRUSHERS
220V/60HZ
DRYER MODEL: TRSG-1
YEAR: 2012
FABRIC/WOVEN OPENERS 2040
MAKE: E+L SWS 9681

QUANTITY: 1