Search results for: 'NEEDLE B'

REFERENCE NUMBER: M-5283 (13131CKAKT12U) L ELMARCO NANOSPIDER PRODUCTION LINE NANOSPIDER PRODUCTION LINE NS 4S1000U QUANTITY AVILABLE: 1 Learn More

REFERENCE NUMBER: T-6583

PROTECTIVE SUIT

 

TWO-PIECE HOODED DESIGN: WITH TWO-PIECE HOODED THREE-DIMENSIONAL CUT AND ELASTIC BAND AROUND THE FACE OPENING, THE HOOD CAN BETTER FIT THE SHAPE OF FACE AND ENHANCE THE PROTECTION EFFECT.

SEAM SEALED TAPE WORKMANSHIP: EACH SEAM IS SEALED WITH TAPE, AND THE WAIST IS APPLIED WITH AN INTERNAL ELASTIC BAND, WHICH BETTER ENHANCE THE SEAM PROTECTION AND THE FITNESS OF THE SUIT.

ELASTIC CUFF: THE CUFF USES AN INTERNAL ELASTIC BAND TO FURTHER ENHANCE TIGHTNESS AND PROTECTION.

CLOSED PLACKET DESIGN: CENTER FRONT ZIPPER APPLICATION ALLOWS EASY PUT-ON AND TAKE-OFF, WHILE THE ZIPPER PLACKET DESIGN BRINGS BETTER PROTECTION

TECHNOLOGICAL DETAILS: (1)NEEDLE STITCHING, BONDING, AND HEAT-SEALING PROCESSES ARE APPLIED TO THE CONNECTION PART OF THE PROTECTIVE SUIT. THE HOLES OF THE STITCHES ARE SEALED. THE STITCH PITCH SHOULD BE 8 TO 14 STITCHES PER 3CM. THE STITCHES ARE ALIGNED AND PROPERLY SPACED. THERE SHOULDN' T BE SKIPPED STITCH. BONDED OR HOT-SEALED PARTS SHALL BE FLAT AND SEALED WITHOUT AIR BUBBLES.

(2)THE ZIPPER OF THE PROTECTIVE CLOTHING SHOULD NOT BE EXPOSED,AND THE ZIPPER PULLER SHOULD BE SELF-LOCKING.

(3)THE STRUCTURE OF PROTECTIVE SUIT SHOULD BE IN CONFORMITY, EASY TO PUT ON AND TAKE OFF, AND THE JOINTS MUST BE TIGHT.

(4)ELASTIC CUFFS AND ANKLES, AND ELASTIC HOOD AND WAIST OPENINGS.

(5)THE PROTECTIVE SUIT IS IN OVERALL STRUCTURE,WHICH CONSISTS OF A HOODED TOP AND PANTS.

Learn More

REFERENCE NUMBER: M-3290

FEHRER NL42 NEEDLE LOOM YEAR 1985 WIDTH 2700mm – QUATTRO PUNCH

 

MAKE: FEHRER

TYPE: NL42

YEAR: 1985

WORKING WIDTH 2700mm

QUATTRO PUNCH

TWO BOARDS UP AND TWO BOARDS DOWN

NEEDLES: 4 X 7500 N/M

WEIGHT: CA. 22TO

DIMENSIONS: 3900mm X 2300mm X 2600mm

 

COMPLETE WITH CONTROL SYSTEM

COMPLETE WITH FEEDING SYSTEM

DC MAIN DRIVE

GOOD CONDITION

OVERHAULED 2 GEARBOXES

 

MACHINE IS STILL IN OPERATION

 

QUANTITY: 1

Learn More

C-4029 LONATI KNITTING MACHINES, NEEDLES 156 TO 384, DIAMETER 3.5 TO 3.75, YEAR 1995 TO 2011

OFFER 001
LONATI L411 KNITTING MACHINE
MAKE: LONATI
TYPE: L411
KNITTING MACHINE
YEAR: 1995

QUANTITY: 123

OFFER 002
LONATI L404 KNITTING MACHINE
MAKE: LONATI
TYPE: L404
KNITTING MACHINE
YEAR: 1995

QUANTITY: 12

OFFER 003
LONATI B04MR COMFORT KNITTING MACHINE
MAKE: LONATI
TYPE: B04MR COMFORT
KNITTING MACHINE
YEAR: 1997

QUANTITY: 30

OFFER 004
LONATI LA03 KNITTING MACHINE
MAKE: LONATI
TYPE: LA03
KNITTING MACHINE
YEAR: 2011

QUANTITY: 34

OFFER 005
LONATI L41 TV KNITTING MACHINE
MAKE: LONATI
TYPE: L41 TV
KNITTING MACHINE
YEAR: 2010

QUANTITY: 30

OFFER 006
LONATI GL616 P.C EST KNITTING MACHINE
MAKE: LONATI
TYPE: GL616 P.C EST
KNITTING MACHINE
YEAR: 2010

QUANTITY: 190

OFFER 007
LONATI GL616 P.C EST KNITTING MACHINE
MAKE: LONATI
TYPE: GL616 P.C EST
KNITTING MACHINE
YEAR: 2010

QUANTITY: 60

Learn More

REFERENCE NUMBER: V-1046 KARL MAYER MR(E)S 56 SU MAKER: KARL MAYER TYPE: MR(E)S 56 SU WIDTH : 130 INCHES PATTERN WHEELS OR CHAIN L1 - L3 OVER CHAIN SU – AGGREGATES TOTAL 28 AGGREGATES BARS 2 GROUND + 2 PICCO BARS INSTALLED 1 GROUND BAR AVAILABLE WITHOUT GUIDES PATTERN BARS 52 INSTALLED LYCRA BAR: 1 INSTALLED SUPERSTRUCTURE TYPE : LIBERTY YES QTY BEAM SHAFTS : 3 X 70 mm TAKE UP TYPE : STANDARD QTY EBA BEAM DRIVE : 1 EBA FOR GROUND 1 EBA FOR LYCRA PATTERN BEAMS : 54 PIECES NEEDLE NOS : 59.75. G1 CLOUSER NOS : C – 24-76/4-14 SINKER NOS: S-24 -98 -59 /S 24-99 - 59 GUIDE REF : AL – 24 – 26 -38 TRICK REF : F – 24 -76/4-14 PATTERN GUIDES : F- AS IT IS IN THE MACHINE YARNCONTROL SYSTEM: PROKOSTOP QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3945

GRIBETZ QUILTER (BLUE COLOR) – 86 INCHES – ULTRA 12

 

PLATE INFO:

TYPE/MODEL: DG2100 CHAINSTITCH COMPUTER

MACHINE SIZE: 86 ULTRA12

NEEDLE SPACING: 1×3×6

MACHNE WIRED: 230V 3PH 60HZ

AUX. TRANSFORMER: 480V 3PH 60HZ

INCLUDES:

(2) CIRCULAR BLADES ON THE BACK OF THE QUILTER

(2) THREAD RACKS

(1) TRANSFORMER

(2) BACK ARMS TO SUPPORT THE ROLLS OF FOAM

APPROX. (30) LOOPERS

(1) CLOTH TRAY

NO CAT WALK AVAILABLE

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: T-6973 LAFER GRV-90 DUPLEX ITALY- DOUBLE DRUM RAISING MACHINE, WORKING WIDTH 1800mm LAFER GRV-90 DUPLEX ITALY- DOUBLE DRUM RAISING MACHINE CONDITION IS LIKE NEW WITH LOW WORKING HOURS/NEEDLES JUST NEWLY CHANGES 24 + 24 RAISING CYLINDERS WORKING WIDTH: 1800mm AC MOTORIZATION: 380V 50Hz + INVERTERS FOLDER AT EXIT BOTH MACHINES ARE STILL MANUFACTURING ON THE MILL FLOOR Learn More

REFERENCE NUMBER: T-6913 MECA ECORDING MULTITECH 115 QUILTING MACHINE, YEAR 2003 RECONDITIONED MECA ECORDING MULTITECH 115 QUILTING MACHINE YEAR 2003 RECONDITIONED WITH 6 MONTHS WARRANTY MECA ECORDING MULTITECH 115 LOCK STITCH SHUTTLE QUILTING MACHINE 3 NEEDLE BARS GAUGE 3” EACH 115 NEEDLES EACH BAR GAUGE NEEDLES 1” WIDTH OF QUILTING 115” WORKING WIDTH 2900mm CARRIAGE MOTION 12” SPEED 550 / 600 RPM BTSR THREAD SENSORS SOFTWARE PEGASUS IN SET WITH THE PANEL CUTTER AND THE WINDER DELIVERY READY QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6839 AUTEFA, TEMAFA NONWOVEN LINE, YEAR 1970 BRAND: AUTEFA, TEMAFA SHORT DESCRIPTION: NONWOVEN LINE YEAR: 1970 SUITABLE FOR A PRODUCTION OF: 700/800 GRS/SQUARE METER COMPOSED OF: 1 BESSI CARDING MACHINE, WORKING WIDTH 2500mm -TEMAFA FEEDER -BREAST ROLLER DIAMETER 1500mm, 7 COUPLE OF WORKERS, DIAMETER 220/74 -DOFFER DIAMETER 1285mm -DRUM DIAMETER 1500mm, 6 COUPLE OF WORKERS -DOFFER DIAMETER 1500mm -FLY COMB 1 AUTEFA CROSS LAPPER MODEL MAK IN WORKING WIDTH 2500mm, DELIVERY 3000mm 1 DILO NFZ25 PRE-NEEDLING MACHINE, YEAR 1965, 2580 NEEDLES /METER 2 MACCHI LONGITUDINAL CUTTERS 1 SPINBAU TRANSVERSAL CUTTER 1 WINDER ON WEIGHS (LOADING CELLS METTLER) QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6837 AUTEFA, HERGETH, SPINNBAU NEEDLING+THERMOBONDING LINE, YEAR 1992 TO 2000 BRAND: AUTEFA, HERGETH, SPINNBAU NEEDLING+THERMOBONDING LINE YEAR: 1992 TO 2000 CONSISTING OF: 3 HERGETH BALE OPENERS, WORKING WIDTH: 1000mm 1 HERGETH FINE OPENER, YEAR: 2000, WORKING WIDTH: 1000mm 1 SPINNBAU DOUBLE DOFFER CARD, YEAR: 1992, WORKING WIDTH: 2500mm 1 AUTEFA CL 2003 CROSS-LAPPER, YEAR: 1992, INPUT: 2500mm, OUTPUT: 3000mm 1 ASSELIN DRAFTER, WORKING WIDTH: 3000mm 1 FEHRER NL 9/SRS PRE-NEEDLE LOOM, YEAR: 1992, WORKING WIDTH: 2700mm, STROKE: 60mm, 10000 NEEDLES/M, 1300 RPM 1 FLEISSNER OMEGA DRUM OVEN 1 COOLING CALENDER 1 EDELMANN CUTTING AND WINDING UNIT WORKING WIDTH: 2500mm QUANTITY: 1 Learn More