Search results for: 'cap'

REFERENCE NUMBER: M- 3405 (880160LMW7RM) K KUSTERS THERMOSOL DYEING MACHINE YEAR 1993 WIDTH 1800mm KUSTERS THERMOSOL DYEING MACHINE YEAR 1993 - TOTAL WIDTH 1800mm - FABRIC WIDTH 1600 mm - INITIAL DRYER 3 SECTIONS – ELECTRIC HEATING - DRYER 3 SECTIONS – STEAM HEATED ( 5 BARS) - THERMOSOL 2 SECTIONS – GAS HEATED QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5253 (131365WMBC12R) L BARMAG EVOSPEED POY SPINNING LINE BARMAG SPINNING MACHINE 12 POSITIONS (72 THREADLINES) FOR PET POY MICROFILAMENT WITH EVOSPEED / RADIAL QUENCHING + CONVENTIONAL QUENCHING MANUFACTURER: BARMAG INSTALLED IN 1998/1999, STARTED UP IN 2000 BUT ONLY USED FOR 3 TO 4 YEARS, THEREAFTER DISMANTLED, PRESERVED & STORED FOR FUTURE USE IN AN AIRCONDITIONED HALL IN EXCELLENT CONDITION QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5253 (1313YNWMXX12) L BARMAG EVOSPEED POY SPINNING LINE BARMAG SPINNING MACHINE 12 POSITIONS (72 THREADLINES) FOR PET POY MICROFILAMENT WITH EVOSPEED / RADIAL QUENCHING + CONVENTIONAL QUENCHING MANUFACTURER: BARMAG INSTALLED IN 1998/1999, STARTED UP IN 2000 BUT ONLY USED FOR 3 TO 4 YEARS, THEREAFTER DISMANTLED, PRESERVED & STORED FOR FUTURE USE IN AN AIRCONDITIONED HALL IN EXCELLENT CONDITION QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: M-3994

CONE DYEING MACHINE MASTER BM 300 400KG YEAR 1999

 

CONE DYEING MACHINE

MASTER BM 300, 400 KG, RACK WITH 43 ​​BARS.

MAX OPERATING PRESSURE MAIN BODY: 5

MAXIMUM OPERATING TEMPERATURE OF MAIN BODY:204C°

MAX OPERATING PRESSURE COIL :16

MAXIMUM OPERATING TEMPERATURE OF SERPENTINE:204C°

CAPACITY OF MAIN BODY :4085 LITERS

CAPACITY 65 LITERS SERPENTINE

YEAR 1999

Learn More

REFERENCE NUMBER: M-3993

CONE DYEING MACHINE MASTER BM 100 HS 125K YEAR 2001 -125 KGS

 

CONE DYEING MACHINE

MASTER BM 100 HS

125K

RACK WITH 12 BARS

MAX OPERATING PRESSURE MAIN BODY: 5

MAXIMUM OPERATING TEMPERATURE OF MAIN BODY: 158°C.

MAX OPERATING PRESSURE COIL: 16

MAXIMUM OPERATING TEMPERATURE OF SERPENTINE: 204°C

CAPACITY OF MAIN BODY: 1260 LITERS

CAPACITY OF SERPENTINE: 25 LITERS

YEAR: 2001

Learn More

REFERENCE NUMBER: T-6925 KARL MAYER FRACTIONAL WARPER AND KARL MAYER ROTAL SIZING MACHINE, YEAR 2002 ITEM 001 KARL MAYER FRACTIONAL WARPER MOD ZM-SP 2000/1250DNC AIR PRESSURE 6 ATM YEAR OF CONSTRUCTION 2002 CREEL MODEL GWSP780 NUMBER POSITION BOBBIN 780 DISTANCE EACH POSITION 335mm DIAMETER BEAM 1250 WIDTH 2000 WORKED 2 SHIFT 5 DAYS A WEEK DUST ASPIRATION ON WARPING UNIT TYPE KM 711R44RD 90160L POWER 15 KW YEAR 2002 WARPING BEAM DIAMETER 1250 X 2000 WIDTH N24 ELECTRIC FORKLIFT ARMANNI FOR THE WARPING BEAM ELECTRIC CHARGER FOR FORKLIFT ITEM 002 KARL MAYER ROTAL SIZING MACHINE MOD ELC O TENS YEAR OF CONSTRUCTION 2002 WIDTH 4000mm MAX DIAMETER BEAM 1250 APPLICATION OF WAX OUTSIDE DRYING CILINDER WORKED 1 SHIFT 5 DAYS X WEEK 1-SIZING BOX, 2 SET OF 2 SQUEEZING CYLINDERS STEAM CILINDER 8 WITH TEFLON 2 STAINLESS STEEL TOT 10 DIAMETER 800 WIDTH 2000mm CREEL OF SIZING 16 BEAMS WIDTH 2000mm DIAMETER 1250 KITCHEN SIZING MODEL MPD-PW/2000 YEAR 2002 CRANE TYPE 414 CAP. UP TO 1600KG SIZING ASPIRATION ON DRYER STAINLESS STEEL 2 MOTOR ASPIRATION 11+7.5KW DUST ASPIRATION ON THE ROLLING SYSTEM SPECIAL FORKLIFT FOR FULL BEAM MAX WIDTH OF BEAM 4000mm MAX WEIGHT 2000KG YEAR 2012 Learn More

REFERENCE NUMBER: T-6921 SANTEX ACTIWASH CONT. WASHING MACHINE, WORKING WIDTH 1800mm, YEAR 1993 OVERHAULED 2015 SANTEX ACTIWASH CONT. WASHING MACHINE YEAR 1993 OVERHAULED 2015 WORKING WIDTH 1800mm 5 WASHING BOXES EACH WITH 2 SIEVE DRUMS DWELLING CHAMBER IS 500 METER FABRIC CAPACITY AFTER EACH WASHING CHAMBERS SQUEEZER SPEED 0 TO 80 METER /MIN WITH DOSING VESSELS EXIT PLAITER MACHINE IS SUITABLE FOR WOVEN AND KNITTED FABRICS MACHINE IS OVERHAULED MACHINE IS IN EXCELLENT CONDITION QUANTITY: 1 Learn More

REFERENCE NUMBER: Y-2075 SPINNBAU DOUBLE DOFFER NON-WOVEN CARD 2500mm RECONDITIONED CARD SPECIFICATION: 2500mm WORKING WIDTH DISH FEEF ARRANGEMENT WITH FEED ROLLER 159mm 1 LICKER-IN 292mm 1 BREAST 412mm WITH 1 WORKER 213mm AN 1 STRIPPER 105mm 1 TRANSFER 412mm 1 SWIFT 1500mm WITH 6 WORKERS 213mm AND 6 STRIPPERS 105mm 1 TOP DOFFER 500mm 1 BOTTOM DOFFER 550mm 2 BOTTOM RANDOMISER ROLLERS 292mm 2 BOTTOM RANDOMISER ROLLERS 292mm TOP DOFFER DOFFING ROLLER SYSTEM 2 ROLLER 105mm AND 105mm CARD MOUNTED ON RAILS WITH PLATFORM SPINNBAU GUARDING SYSTEM FITTED WITH THE FOLLOWING NEW EQUIPMENT: NEW HIGH CAPACITY HOPPER FEEDER WITH CHUTE DELIVERY ELECTRONIC WEIGHT SYSTEM NEW AC INVERTER DRIVES SYSTEM WITH TOUCH SCREEN CONTROL NEW AC GEARED MOTOR UNITS NEW DRIVE BELTS AS REQUIRED NEW SAFETY CIRCUIT, E-STOPS AND GUARD INTERLOCKS HOPPER FEEDER WITH CHUTE DELIVERY 2500mm WIDE 1500mm FEEDER CONVEYOR PVC WITH WOOD LATHS WITH GEARED MOTOR DRIVE INCLINED SPIKED LATTICE PVC WITH WOOD LATHS WITH GEARED MOTOR DRIVE LEVELLING ROLLER WITH GEARED MOTOR DRIVE STRIPPING ROLLER WITH GEARED MOTOR DRIVE VOLUMETRIC CHUTE DELIVERY VIBRATING BACKPLATE WITH GEARED MOTOR DRIVE CHUTE THICKNESS ADJUSTABLE DELIVERY ROLLERS TO BE DRIVEN FROM CARD FEED SHEET ELECTRICAL CONTROLS WITH VARIABLE SPEED DRIVE TO SPIKED LATTICE, OR STRIPPING ROLLERS AND VIBRATING BACKPLATE QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6843 SPINNBAU NONWOVEN LINE, YEAR 1994 BRAND: SPINNBAU SHORT DESCRIPTION: NONWOVEN LINE YEAR: 1994 NONWOVEN LINE CONSISTING OF 1. CARD FEEDING: CARD FEEDING R&S, NEW, IN 2500mm WORKING WIDTH, CONSISTING OF: ONE R&S MATERIAL BIN IN 2500mm WORKING WIDTH, 600mm DEPTH AND A COMPLETE HEIGHT OF 2500mm, WITH TOP AND BOTTOM WINDOW AT BOTH SIDES, FILLING LEVEL CONTROLLED BY IN HEIGHT ADJUSTABLE INFRARED DEVICES. ONE DOOR AT THE BACKSIDE FOR CLEANING, LOCKED BY SECURITY SWITCHES. THE VITIATED AIR ESCAPES THROUGH THE PERFORATED SHEETMETAL AT THE TOP. THESE AREAS ARE COMPLETELY COVERED, THE OUTGOING AIR CAN BE FILTERED BY AN EXCISTING FILTERSTATION OR OPTIONALLY BY FILTERBAGS, 2 DELIVERY ROLLERS. ONE R & S CHUTE FEEDER IN 2500mm WORKING WIDTH CONSISTING OF: ONE OPENING ROLLER DIAMETER 450mm, ONE VIBRATION CHUTE, FIBRELEVEL CONTROLLED BY ULTRASONIC, CHUTE ADJUSTABLE OVER TOOTH RAILS IN DEPTH FROM 80 TO 240mm, TWO DRAWING OFF ROLLERS, ONE FEEDING TABLE WITH TRANSILON BELT, PREPARED FOR SERVOLAP. DRIVES: DELIVERY ROLLERS: AC -GEARBOXMOTOR 0.55 KW, FC OPENING ROLLER: AC-MOTOR 2.2 KW VIBRATION: AC-GEARBOXMOTOR, 0.55 KW, FC FEEDING TABLE: AC-GEARBOXMOTOR, 0.55 KW, FC 2. CARDING; ONE SPINNBAU DOUBLE DOFFER CARD, IN 2500mm WORKING WIDTH, YEAR 1994: CARD, FOLLOWING EQUIPPED: 1 CYLINDER FEEDING DEVICE WITH FEED PLATE: 1 FEED ROLLER DIAMETER 159mm 1 LICKER-IN DIAMETER 292mm PRE-OPENING: 1 BREAST DIAMETER 412mm 1/1 WORKER/STRIPPER DIAMETER 213/118mm 1 INTERMETE ROLLER DIAMETER 412mm CARD: 1 MAIN CYLINDER DIAMETER 1500mm 5/5 WORKERS/STRIPPERS DIAMETER 213/118mm 1 DOFFER, TOP DIAMETER 550mm 1 DOFFER, BOTTOM DIAMETER 550mm 2 CONDENSING ROLLERS TOP DIAMETER 292mm TOP DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. BOTTOM DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. DRAWING OFF TABLES: TOP TRANSILON BELT BOTTOM: TRANSILON BELT COVERS: THE CARD HAS COVERS TO CLAP UP AND DOWN (SECURED WHEN CLAPPED UP), THE SIDES ARE FULLY COVERED AND ELECTRONICALLY LOCKED. RIGID WIRE: ONE COMPLETE SET OF RIGID WIRE, MOUNTED, FOR FIBRES 1.5 DTEX - 17 DTEX, CAPACITY UP TO 800 KG/H ELECTRIC: VOLTAGE: ~400 V AC, 3 PHASES CONTROL VOLTAGE: ~220 V AC, =24V DC FREQUENCY: 50 Hz COLOUR: MACHINE: RAL 5015/ 9001 (IF YOU LIKE WE CAN CHANGE) CONTROL CABINET: RAL 7032, GREY SWITCH BOARD: RAL 7032, GREY ELECTRICAL DRIVES: FEED ROLLER: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED LICKER-IN: MECHANICAL FROM BREAST BREAST: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED WORKERS BREAST: MECHANICALLY FROM BREAST INTERMEDIATE ROLLER: MECHANICALLY FROM MAINSWIFT MAIN SWIFT: 1 AC-MOTOR FREQUENCY CONTROLLED WORKERS: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED DOFFERS: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED CONDENSING ROLLERS: 1 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF DEVICES: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF TABLES: 2 AC GEARBOXMOTORS, FREQUENCY CONTROLLED SWITCHBOARDS AND CONTROLS: SWITCHBOARDS RITTAL SERIES, COMPLETE WIRED. SWITCHBOARDS WITHOUT COOLING DEVICES. CONTROL CABINET OPERATION WITH COLOURED SCREEN, FITTED IN CONTROL CABINET OPERATED BY SIEMENS SPS S7-300 1 SET OF CABLE MATERIAL: FOR 20 MTR LENGTH BETWEEN MACHINERY AND SWITCHBOARD WITHOUT INSTALLATION MATERIAL ERECTION AND STARTING UP: IS NOT INCLUDED, SHOULD BE MADE BY US FOUNDATION: ONE FOUNDATION IN 750mm HEIGHT, WITH SIDEWALKS AROUND, TWO STEPS ON EACH SIDE. SUCTION: CONNECTION FOR THE DOFFER AND TOP OF CARD 3. CROSSLAPPING, NEW: ONE REISKY & SCHLESE CROSSLAPPER, TYPE RS 100 IN 2500mm WORKING WIDTH (BELT WIDTH 2800mm) AND 2500mm LAPPING WIDTH (BELT WIDTH 2700mm) MAX INFEEDING SPEED: 100 MTR/MIN, DELIVERY SPEED OF DRAWING OFF TABLE: FROM 0 TO 20 MTR/MIN, CONSISTING OF: ONE FEEDING TABLE IN 1000mm LENGTH MOUNTED IN IT'S OWN FRAME, ADJUSTABLE IN THE HEIGHT ACCORDING TO THE DOFFER, FURTHER THE COMPLETE FEEDING TABLE CAN BE MOVED UP IF THE DOFFER HAS TO BE DRAWN BACK. THE CROSSLAPPER ITSELF GUIDES THE WEB FROM THE INFEED DOWN TO THE OUTLET BETWEEN THE CONVEYORS, WHICH HAVE ANTISTATIC PROPERTIES. THE TENSION AND THE DISTANCES BETWEEN THEM CAN BE ADJUSTED ACCORDING TO THE DIFFERENT FIBRES. THE CONVEYORS ARE EQUIPPED WITH AUTOMATIC EDGE GUIDES, SO THAT THEY ARE RUNNING IN THE CENTRE. THE LAID WEB IS COVERED BY THEM. THE SERVO- DRIVES ARE RESPONSIBLE FOR THE PERFECT SYNCHRONISATION AND THE EXACT REVERSAL OF THE CARRIERS. THE SWITCHBOARD IS EQUIPPED WITH A COULOURED TOUCHSCREEEN, WHERE ALL NECESSARY PARAMETERS CAN BE PROGRAMMED, ALSO DIFFERENT CURVES FOR STORING THE WEB DURING REVERSALS. DRIVES: FEED TABLE: AC-SERVO-MOTOR BELT 1: AC-SERVO-MOTOR BELT 2: AC-SERVO-MOTOR TOP CARRIER: AC-SERVO-MOTOR BOTTOM CARRIER: AC-SERVO-MOTOR DRAWING OFF TABLE: AC-SERVO-MOTOR HEIGHT DRAWING OFF TABLE LEFT: AC-LINEARMOTOR HEIGHT DRAWING OFF TABLE RIGHT: AC-LINEARMOTOR OPERATION: BY COLOURED TOUCHSCREEN, SIEMENS IN CONTROL CABINET OF CARD. PARAMETERS: MANUEL / INLINE INFEED SPEED DRAFT (INFEED SPEED/LAYING SPEED) NUMBER OF LAPS LAPPING WIDTH FROM MIDDLE TO THE LEFT AND TO THE RIGHT DRAWING OFF SPEED AUTOMATICALLY SHOWN DEPENDING ON LAYERS DARWING OFF TABLE HEIGHT LEFT / RIGHT LAYING SPEED RECEIPES FAULT SHOWING SWITCHBOARD AND ELECTRONIC DEVICES: SWITCH BOAD RITTAL, COMPLETE WIRED. SWITCHBOARD WITHOUT COOLING DEVICE. CONTROL PANNEL RITTAL. CONTROLLED BY S7 SIEMENS 10000mm OF CABLES BETWEEN SWITHBOARD AND MACHINE/CONTROLPANEL QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6840 AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE BRAND: AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE CONSISTING OF: BLEND LINE, 60” WIDE, 4 HOPPERS WITH 12 HEAVY DUTY EXTENDED APRONS & NEW ELECTRONIC WEIGHING SYSTEM (2016). ALL MACHINES COMPLETELY RECONDITIONED IN 2016. OMMI STACK RESERVE, AUTOMATIC COMBO 332, YEAR 2000 SPINNBAU CARD, 2500mm, DOUBLE DOFFER, YEAR 1995, REPORTED ~1500 TO 1800 PPH CAPACITY DEPENDING UPON PRODUCT. AUTOMATEX FA/3000 TC CROSSLAPPER, YEAR 1997, AC DRIVES. BATT DRAFTER, 12 ROLLS. AUTOMATEX PR-100/T PRE-NEEDLER, 60mm STROKE, YEAR 1997 DRAFTER, 5 ROLLS. AUTOMATEX AG 154/TB NEEDLE LOOM, QUAD PUNCH, 50mm STROKE, YEAR 1997 FOUR ROLL STRETCH. METAL DETECTOR. ENTEX TENTER WITH VERTICAL IR HEAT BANKS, YEAR 1997 WINDER, YEAR 1997 PERKINS 4 ROLL CALENDER, NO STEEL ROLLS OR HEAT SYSTEM INCLUDED BUT MIGHT BE NEGOTIATED. EHHARDT+LEIMER GUIDER MODEL SE 11062, YEAR 2013 ENTEC WINDER, YEAR 1997 FINISHED WIDTH REPORTED OF 210" BUT COULD GO WIDER. LINE RAN PRIMARILY GEOTEXTILE & BEDDING PRODUCTS FROM 4.5 TO 10 OZ/YD. QUANTITY: 1 Learn More