Search results for: 'open wi'

C-3497 VAMATEX LEONARDO LOOM, WORKING WIDTH 3400mm, YEAR 2001, JACQUARD

VAMATEX

MODEL: LEONARDO

YEAR: 2001

QUANTITY: 2

Learn More

C-3946 SPINNBAU CARDING MACHINE, WIDTH 3000mm, YEAR 1989

SPINNBAU CARDING MACHINE
BRAND: SPINNBAU
YEAR: 1989
WIDTH: 3000mm

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-2346 ZINSER RING SPINNING PLANT 23,240 SPINDLES YEAR 1993 TO 2003 CONSISTS OF: 3 BALE OPENERS, YEAR 1993 TRUTZSCHLER COTTON AND BLENDS BLOWROOM, YEAR 1993 8 TRUTZSCHLER DK903 CARDS, YEAR 2003 8 TRUTZSCHLER DK760 CARDS YEAR 1993 2 RIETER SB 851 DRAW FRAMES 3 RIETER SB2 DRAW FRAMES 5 RIETER RSB 851 DRAW FRAMES 3 ZINSER 660 ROVING FRAMES, 120 SPINDLES, YEAR 1993 20 ZINSER 321 RING SPINNING FRAMES-1184 SPINDLES, AUTO DOFFING, 42mm RINGS, 5 MURATA CONE WINDERS TYPE 7/5, 60 HEADS, USTER POLYMATIC CLEARERS, CBF STATION, YEAR 1995 3 SCHLAFHORST CONE WINDERS, YEAR 1997, 60 HEADS, USTER POLYMATIC C15 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5983 (880BGSDXX7) L BABCOCK WASHING RANGE WITH 6 CHAMBERS YEAR 1999 WIDTH 2000mm WASHING RANGE MAKE: BABCOCK WORKING WIDTH: 2000mm YEAR: 1999 6 CHAMBERS (WITH DRUM AND PULVERIZED WASHING SYSTEM – 3 CHAMBERS/1 PADDING MANGLE/3 CHAMBERS) ENTRANCE ZÖLLIG FROM BIG BATCH OR CARRIER FABRIC RELAXATION SYSTEM BIANCO CENTERING DEVICE AND FABRIC OPENER PADDING BANGLE EXIT BIG BATCHER OR PLAITING QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1151 SPINNBAU NONWOVEN CARDING MACHINE TYPE 216, YEAR 1992, WIDTH 2500MM SPECIFICATIONS: NONWOVEN CARDING MACHINE SPINNBAU TYPE 216 2500 MM WORKING WIDTH YEAR OF CONSTRUCTION 1992 THE CARD IS COMPLETE WITH FINE OPENER AND FBK. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4144

BIELLA SHRUNK DECATIZING MACHINE TYPE VULCANO YEAR 1997 WIDTH 1800MM

 

BIELLA SHRUNK DECATIZING MACHINE

TYPE VULCANO

YEAR 1997

WIDTH 1800 MM

HIGH FABRIC FEEDING FRAME WITH TENSIONER

HUMIDIFYING MACHINE, TYPE IGROFAST

CORINO PIN WHEEL TYPE WEFT STRAIGHTNER TYPE FLC-3

CORINO OPENING AND CENTERING DEVICE WITH SCROLL ROLLERS

BIELLA CONTINOUS DECATIZING MACHINE TYPE VULCANO, STEAM HEATED DRUM WITH FELT

FABRIC EXIT WITH PLAITER

380V, 50HZ, PLC 

 

QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: T-6550

MEDICAL PROTECTIVE CLOTHING BLOOD SYNTHETIC PENETRABILITY TESTER

 

TECHNICAL SPECIFICATIONS AND CONFIGURATION:

1. THE INSTRUMENT ADOPTS AN AIR SOURCE THAT CAN PROVIDE (0.5 ~ 30±0.1) KPA PRESSURE TO CONTINUOUSLY PRESSURIZED THE SAMPLE, WHICH IS NOT RESTRICTED BY THE SPACE OF THE TEST SITE;

2. THE AIR PRESSURE RANGE CAN BE ADJUSTED FREELY, AND THE ADJUSTMENT RANGE (0.5 ~ 30) KPA;

3. COLOR TOUCH SCREEN DISPLAY AND OPERATION;

4. THE SAMPLE CLAMPING PAD IS PROCESSED WITH IMPORTED SPECIAL ALUMINUM PROFILES, WHICH IS LIGHT IN MATERIAL, CLEAN IN SURFACE AND NEVER RUSTS.

5. THE INSTRUMENT ADOPTS IMPORTED SPECIAL ALUMINUM WIRE DRAWING PANEL, EQUIPPED WITH METAL KEYS, SENSITIVE OPERATION, NOT EASY TO DAMAGE;

6. CLAMPING DEVICE FOR INSTRUMENT SAMPLES, EQUIPPED WITH LOCKING PROTECTION, TO PREVENT THE SYNTHETIC BLOOD FROM SPLASHING AROUND;

7. CLAMPING FORCE IS ACCURATE AND RELIABLE;

8. THE TEST TANK IS EQUIPPED WITH A SPECIAL PLACEMENT DEVICE, WHICH IS CONVENIENT FOR CUSTOMERS TO OPERATE;

9. THE TEST TANK IS PROCESSED WITH SPECIAL 316 STAINLESS STEEL, AND THE TOP IS EQUIPPED WITH A SPECIAL COVER FOR HIGH TRANSPARENT PROTECTION;

10. THE WASHER BELOW THE SAMPLE IS MADE OF HIGH-QUALITY PTFE MATERIAL AFTER SPECIAL PROCESSING;

11. SQUARE METAL BLOCK NET: OPEN SPACE ≥50°%; BENDING ≤5mm AT 30KPA;

12. INSTRUMENT TIME CONTROL ACCURACY ≤01 SECONDS;

13. THE SHELL OF THE INSTRUMENT IS MADE OF HIGH-QUALITY METAL BAKING PAINT, WHICH IS BEAUTIFUL AND GENEROUS.

14. EQUIPPED WITH PRINTER INTERFACE, CONNECTED TO THE PRINTER CAN DIRECTLY PRINT DATA REPORTS.

 

TECHNICAL PARAMETERS:

1. SAMPLE SIZE: 75mm X 75mm

2. TEST AREA: 28.26 SQUARE CENTIMETERS

3. AIR PRESSURE ADJUSTMENT RANGE (0.5 ~ 30) KPA

4. EXTERNAL SIZE: 500mm X 500mm X 500mm (L X W X H)

5. WEIGHT OF THE INSTRUMENT: 40 KG

6. POWER SUPPLY: AC220V, 50HZ,SCOPE OF SUPPLY: 1. ONE MAIN MACHINE; 2. TWO PTFE GASKETS; 3. TWO ORDINARY WASHERS; 4. ONE METAL BLOCKING NET; 5. A SET OF SPECIAL LOCKING TOOLS; 6. ONE HIGH-QUALITY SILENT AIR PUMP, [NOTE: SAFETY PRODUCTION LICENSE IS NOT INCLUDED]. 7. EQUIPPED WITH PRINTER INTERFACE; 8. ONE SAMPLE TEMPLATE; 9. ONE PRODUCT CERTIFICATE; 10. ONE COPY OF PRODUCT OPERATION MANUAL.

 

OPERATION INSTRUCTION:

INSERT THE AIR PUMP OUTPUT PIPE INTO THE OIL AND WATER SEPARATOR OF THE INSTRUMENT AS REQUIRED (PRESSURE 0.1-0.3MPA).

AFTER SWITCHING ON THE POWER, THE STARTUP INTERFACE (NAME OF THE DEVICE) IS DISPLAYED.

PRESS THE "ENTER" BUTTON TO ENTER THE TEST INTERFACE, AS SHOWN IN THE FOLLOWING FIGURE:

CLICK "SETTING” BUTTON, GET INTO PARAMETER SETTING SCREEN, AS BELOW THIS SCREEN CAN SET THE SYSTEM TIME, DATE AND TESTING TIME, AFTER SETTING, CLICK "SAVE” BUTTON TO KEEP THE SETTING DATA. (NOTE: IT REQUIRES 5 MINUTES IN THE STANDARD)

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: T-6583

PROTECTIVE SUIT

 

TWO-PIECE HOODED DESIGN: WITH TWO-PIECE HOODED THREE-DIMENSIONAL CUT AND ELASTIC BAND AROUND THE FACE OPENING, THE HOOD CAN BETTER FIT THE SHAPE OF FACE AND ENHANCE THE PROTECTION EFFECT.

SEAM SEALED TAPE WORKMANSHIP: EACH SEAM IS SEALED WITH TAPE, AND THE WAIST IS APPLIED WITH AN INTERNAL ELASTIC BAND, WHICH BETTER ENHANCE THE SEAM PROTECTION AND THE FITNESS OF THE SUIT.

ELASTIC CUFF: THE CUFF USES AN INTERNAL ELASTIC BAND TO FURTHER ENHANCE TIGHTNESS AND PROTECTION.

CLOSED PLACKET DESIGN: CENTER FRONT ZIPPER APPLICATION ALLOWS EASY PUT-ON AND TAKE-OFF, WHILE THE ZIPPER PLACKET DESIGN BRINGS BETTER PROTECTION

TECHNOLOGICAL DETAILS: (1)NEEDLE STITCHING, BONDING, AND HEAT-SEALING PROCESSES ARE APPLIED TO THE CONNECTION PART OF THE PROTECTIVE SUIT. THE HOLES OF THE STITCHES ARE SEALED. THE STITCH PITCH SHOULD BE 8 TO 14 STITCHES PER 3CM. THE STITCHES ARE ALIGNED AND PROPERLY SPACED. THERE SHOULDN' T BE SKIPPED STITCH. BONDED OR HOT-SEALED PARTS SHALL BE FLAT AND SEALED WITHOUT AIR BUBBLES.

(2)THE ZIPPER OF THE PROTECTIVE CLOTHING SHOULD NOT BE EXPOSED,AND THE ZIPPER PULLER SHOULD BE SELF-LOCKING.

(3)THE STRUCTURE OF PROTECTIVE SUIT SHOULD BE IN CONFORMITY, EASY TO PUT ON AND TAKE OFF, AND THE JOINTS MUST BE TIGHT.

(4)ELASTIC CUFFS AND ANKLES, AND ELASTIC HOOD AND WAIST OPENINGS.

(5)THE PROTECTIVE SUIT IS IN OVERALL STRUCTURE,WHICH CONSISTS OF A HOODED TOP AND PANTS.

Learn More

REFERENCE NUMBER: T-6585

ISOLATION PROTECTIVE CLOTHING MT-C001-XL, 70G COMPOSITE NON-WOVEN FABRIC

 

ISOLATION PROTECTIVE CLOTHING

MODEL: MT-C001-XL

MATERIAL: 70G COMPOSITE NON-WOVEN FABRIC

SURFACE: WITHOUT SEALING STRIPS

WEIGHT: 230G/PIECESIZE: XL(170-180CM)

DESIGN: ONE-PIECE TYPE

FRONT OPENING,COLLARLESS HOOD,ELASTIC BRIM,ELASTIC CUFFS AND LEG OPENINGS.

FEATURE: ISOLATE BACTERIA,WATERPROOF,MICRO BREATHABLE,TEXTURE SOFT,THE HIGHEST GRADE MEDICAL PROTECTIVE CLOTHING MATERIAL.

USAGE: USED FOR VIRUS PROTECTION IN HOSPITAL GENERAL SICKROOM,AIRPORT,BUS STATION,RAILWAY STATION,FACTORY ETC.

CERTIFICATE: CE

 

ITEM 001

QUANTITY: ≥ 30,000PIECES

ITEM 002QUANTITY:≥ 10,000PIECES

ITEM 003QUANTITY:≥ 1,000PIECES

MARKS: THIS PROTECTIVE CLOTHING/ISOLATION CLOTHING NOT INCLUDED SHOES COVER,NOT USED IN ICU.

Learn More

RECOGNIZES PEOPLE’S FACES WITH AND WITHOUT A MASK
RECOGNIZES FACES 4 TO 5 METERS AWAY
MEASURES BODY TEMPERATURE
STORES 3,000 FACE PROFILES
CAN TRIGGER AN ALARM AND/OR NOT OPEN ENTRY DOOR IF SOMEONE HAS A FEVER.
EASY TO SET UP: ON A WALL, ON A TABLE, MOUNTED ON A STAND.

Learn More