Search results for: 'a-2)','.)).)('

OTTAWA COMMANDO 5^TH WHEEL SHUTTLE TRUCK ALSO AVAILABLE

TILE FACTORY DESIGNED BY SACMI / ITALY
YEAR ESTABLISHED 2014 TO 2016
THIS PLANT IS AN ENVIRONMENTALLY FRIENDLY ENTERPRISE, WHEN IT RECYCLES 100% OF ITS EFFLUENTS AND PERFORMS HEAT RECOVERY, THEREBY SAVING ENERGY

See all pictures:
https://www.flickr.com/photos/183869481@N08/albums/72157710649767958

THE PLANT:
COVERS AN AREA OF 22 THOUSAND SQUARE METERS
THE PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
CERAMIC FLOOR TILES
CERAMIC WALL TILES
BMR POLISHING LINE
BMR SQUARING & CHANFERING LINE
THE MAIN RAW MATERIALS ARE CLAY (DB-4) - 31 %, ALBITE (STD5) - 60 %
NEPHAIIN (PN9595) - 2.5 %, KAOLIN (RHB1) - 6.5 %
ON TOP OF IT THEY ARE USING GLAZE MATERIALS AND PAINTS
•FROM THE MOMENT THE MATERIAL IS PREPARED IT IS BEING DRIED PRESSED ON ONE OF FOUR (4) PRODUCTION LINES.
•TWO (2) LINES ARE WITH SACMI PRESSES OF PH 7,500 TON EACH AND HORIZONTAL DRYERS SACMI
•TWO LINES ARE WITH SACMI PRESSES OF PH 3,590 TON EACH AND VERTICAL DRYERS SACMI
•ALL FOUR (4) LINES HAVE THEIR OWN DIGITAL PRINTING MACHINE INCORPORATED
•ALL PRODUCTS ARE BEING GLAZED AND FIRED ON 1200 DEGREES IN ONE OF THE TWO (2) KILNS, SACMI
FOUR (4) SORTING, PACKING AND PALLETIZING LINES
GLAZE PREPARATION LINE
COMPLETE INSTALLATION FOR SMALL PRODUCTION CAPACITIES
COMPLETE FOILING LINE
COMPLETE ELECTRIC INSTALLATION
POWER GENERATOR UNIT
COMPRESSED AIR INSTALLATION

MACHINES ARE MADE BY:
SACMI: ITALY
NUOVA ERA / ROBOBOX: ITALY
BMR: ITALY
IN.TE.SA: ITALY
CUCCOLINI: ITALY
SYSTEM CERAMICS: ITALY
TGMAC SR.L: ITALY
DURST: GERMANY
ROTOCOLOR MAG: ITALY
NUOVA FIMA: ITALY
OMS: ITALY
MARPAK OMS: ITALY
MESSERSI PACK: ITALY

TILE SIZES
THE FACTORY MANUFACTURES TILES OF VARIOUS SIZES FROM 300 X 300 TO 1200 X 1200mm IN VARIOUS TEXTURES AND DESIGNS USING DIGITAL PRINTING MACHINES
PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
THE FACTORY IS FULLY AUTOMATED AND USING ADVANCED CONTROL SYSTEMS!

HUGE AMOUNT OF ORIGINAL SPARE PARTS AVAILABLE WITH THIS PLANT
THIS PLANT IS AVAILABLE WITH THE COMPLETE ELECTRIC, AIR, GAS, RECYCLING INSTALLATION

THIS PLANT CAN BE SOLD: WITH 4 LINES OR 2 AND 2 LINES

REFERENCE NUMBER: J-2184
HORIZONTAL CONVEYOR, 90 METERS LONG, 2400mm WIDE - NEW

MOTORIZED BELT-DRIVEN CONVEYOR
CONVEYING LENGTH: 90 METERS
CONVEYING WIDTH: 2400mm
CONVEYOR HEIGHT: 800mm
CONVEYING SPEED: 0 TO APPROXIMATELY 40 METERS PER MINUTE
BELTS: 200mm WIDTH x 6 PIECES, EACH 90 METERS LONG
DRIVING ROLL DIAMETER: 157mm
DRIVEN ROLL DIAMETER: 75mm
CENTER TO CENTER SPACING OF 2 ROLLS: 500mm
2 MOTORS, EACH 5.5 KW (CONVEYOR IS COMPOSED OF A TOTAL OF 4 SECTIONS. ONE 5.5 KW MOTOR DRIVES TWO SECTIONS)
1 INVERTER, 11 KW (DRIVES BOTH OF THE 5.5 KW MOTORS)
VOLTAGE: 220 VOLTS, 3-PHASE, 60 Hz

LEAD TIME: 45 WEEKDAYS FROM RECEIPT OF DEPOSIT

QUANTITY: 1

FOR FILLING DOWN FEATHER PILLOWS
FILLING RANGE: 1 TO 120 GRAMS (70% FEATHER & 30% DOWN)
WEIGHING SYSTEM: 4 SETS
POWER: 4.5 KW
VOLTAGE: 220 / 380 V, 3-PHASE
AIR PRESSURE: 0.5 TO 0.7 MPA
ACCURATE WEIGHING RESULTS WITH TOLERANCE OF ONLY 1 GRAM
WORKING TABLE DIMENSIONS: 1200 x 2400mm (FOR CUSTOMERS FILLING PILLOWS AND QUILTS)
WORKING TABLE DIMENSIONS FOR PILLOWS ONLY: 1200 x 1200mm (EASIER TO FIT IN A 20 FOOT CONTAINER)
OPERATION CAN BE HANDLED BY ONLY 1 EMPLOYEE
INCLUDES ONE AUTOMATIC FILLING TABLE WITH FOOT SWITCH AND CLAMP DEVICE
THE WORKER STEPS ON THE FOOT SWITCH AND THE CLAMP DEVICE WILL RUN TO CLAMP THE PILLOW BAG
THE FILLING PROCESS AUTOMATICALLY STARTS TO FILL THE PILLOW AND AFTER FINISHING THE CLAMP DEVICE WILL RESET
DURING THIS PERIOD, THE WORKER MAY SEAL THE PILLOW WITH SEWING MACHINE
FOUR HOPPER SYSTEM FOR CONSTANT SUPPLY
ONE KEY FOR CHARGE AND RECHARGE REDUCES WASTED TIME
HIGH-QUALITY, RELIABLE ELECTRICAL COMPONENTS
PREPROGRAMMABLE FOR UP TO 50 GROUPS OF RECIPES WITH EACH RECIPE CONTAINING UP TO 60 SETS OF DIFFERENT FILLING PARTS FOR THE SAME PRODUCTION
FULLY ENCLOSED DESIGN TO KEEP ENVIRONMENT CLEAN AND REDUCE MATERIAL WASTE
AUTOMATIC, ACCURATE WEIGHING WITH LOAD CELL TO ENSURE PRODUCTION QUALITY
CE CERTIFICATE INCLUDED
FLOORSPACE 4000mm LONG X 3000mm WIDE X 2500mm HIGH
TABLE FOR PILLOWS IS 1200 X 1200mm

QUANTITY: 1

FLATTEN ALL TYPES OF MATTRESSES AND ROLL UP THE FLAT POCKET SPRING MATTRESSES.

FLATTENING AND ROLLING MATTRESSES HAS THE ADVANTAGE OF MINIMIZING THE STORAGE AREA AND

FACILITATE THE TRANSPORTATION AND LOWER TRANSPORTATION COSTS.

PRODUCTION CAPACITY:  3 MATTRESSES PER MINUTE FOR NORMAL PACKING.

MATTRESS SIZE: MIN. 700 X 1900mm TO MAX. 2100 X 2100mm

MATTRESS HEIGHT: 50mm TO 400mm

PRESSING SYSTEM: PNEUMATIC FOR NORMAL PACKING, HYDRAULIC SYSTEM FOR FLATTENING AND ROLL PACKING

PNEUMATIC PRESSURE: 482 KGS (8 BARS)

HYDRAULIC PRESSURE: 65 TON

WIDTH OF FILM ROLLS: MIN. 2200 mm TO MAX. 2650 mm

MAX. DIAMETER OF FILM ROLLS: 320mm

MAX. WEIGHT OF FILM ROLLS: 200 KGS

TYPE OF NYLON: PE FILM

THICKNESS OF FILM: 50 TO 150 MICRON (5 TO 15)

POWER REQUIREMENTS: 3 PHASE 380 V OR AS PER CUSTOMER

TOTAL ELECTRIC DRAW: 20 KW

WEIGHT: APPROX. 10 TONS

NUMBER OF OPERATORS: 1

QUALITY STANDARD: CE

WARRANTY: 2 YEARS

FINAL ROLL PACKING TUBE DIAMETER: 250 TO 400 mm

YouTube Video 1: https://youtu.be/7e3-3FtaQdE

YouTube Video 2: https://youtu.be/LrmcQ18A1zM

QUANTITY: 1

SILICON COATED NOMEX FELT (ITB BRAND – ITALIAN)
BLANKET THICKNESS: 8mm
PNEUMATICALLY ADJUSTABLE FELT PRESSURE
MAXIMUM WORKING WIDTH: 2100mm (82.6”)
EVA HOT MELT FILM, FILM ROLL MIMIMUM 500 METERS, MAXIMUM 1000 METERS
36 KW HEATER RESISTANCE
MAIN DRUM DIAMETER: 500mm
TEFLON COATED MAIN CYLINDER
PNEUMATIC BLANKET EDGE CONTROL BY PHOTOCELL
WORKING SPEED: 5 TO 10 METERS PER MINUTE, DEPENDING ON FABRIC THICKNESS (THICK FABRIC IS SLOWER, NORMAL FABRIC IS FASTER)
PLC CONTROLLER WITH TOUCH SCREEN OPERATOR PANEL
PROGRAMMABLE HEATING UP AND COOLING DOWN
ROLL TO ROLL WORKING SYSTEM
SLITTING UNIT WITH 3 PIECE PNEUMATIC CUTTER AND DUAL CENTER REWINDING UNIT (OPTIONAL)
440 V 3-PHASE, 60 Hz, 55 AMP

LEAD TIME: 6 TO 8 WEEKS AFTER RECEIPT OF DEPOSIT

REDUCES VOLUME FOR STORAGE AND TRANSPORTATION
USES COMPRESSED AIR AND PLASTIC COMPOSITE FILM BAGS FOR PACKAGING ITEMS AFTER COMPRESSION
EQUIPPED WITH AUTOMATIC TRANSMISSION TO COMPRESS AND FILM ITEMS UNINTERRUPTED
STANDARD MODEL EQUIPPED WITH ONE WORKSTATION WITH SINGLE SEAL (OPTIONAL ONE WORKSTATION WITH DOUBLE SEALS)
PLC TOUCH SCREEN OPERATION, USER FRIENDLY INTERFACE
CONSTANT TEMPERATURE CONTROL FUNCTION TO PREVENT BAG BURNS

VOLTAGE AND POWER: 220 V SINGLE-PHASE, 0.5 KW, 50 Hz
AIR PRESSURE: 0.4 – 0.8 MPA
PACKING CAPACITY: : 8 TO 12 ITEMS PER MINUTE
PRESS BOARD SIZE: LENGTH 700mm x WIDTH 900mm
MAXIMUM COMPRESSION THICKNESS: 500mm (AIR CYLINDER TRAVEL)
SEAL LENGTH: 880mm x 10mm
OVERALL DIMENSIONS: LENGTH 3390mm x WIDTH 940mm x HEIGHT 2010mm
POWER: 1.5 KW
NET WEIGHT: 350 KG
GROSS WEIGHT: 400 KG

QUANTITY: 1

UP TO 80 SPRINGS PER MINUTE FOR 38,400 SPRINGS IN 8 HOURS
APPROX. 130 SPRINGS DOUBLE BED INNERSPRING UNITS PER 8 HOURS
APPROX. 210 SPRINGS SINGLE BED INNERSPRING UNITS PER 8 HOURS

SPRING OUTSIDE DIAMETER: 80 TO 92mm
SPRING WIRE DIAMETER: 1.9 TO 2.4mm
SPIRAL WIRE DIAMETER: 1.3 TO 1.4mm
SPRING HEIGHT: 80 TO 160mm
MAX. # OF JAWS: 18
MAX. SPRING UNIT WIDTH: 2000mm
POWER: 3 PHASE, 380 VOLTS
POWER: 18 KW
FREQUENCY: 50/60 Hz
WORKING TEMP: 0 TO 40C
WIRE BASKET CAPACITY: 1,000 KGS
WEIGHT: APPROX 4800 KGS
DIMENSIONS: 5600 X 3700 X 2250mm

R-4533 MAMMUT VMK SELECT DOUBLE LOCK CHAINSTITCH MULTI-NEEDLE QUILTER, YEAR 2014
2 BAR , 150m DISTANCE BETWEEN BARS
WIDTH UP TO 2700mm = 106 INCHES

MAMMUT VMK SELECT DOUBLE LOCK CHAINSTITCH MULTI-NEEDLE QUILTER
YEAR: 2014
96 SEPARATELY CONTROLLABLE NEEDLES
FULLY AUTOMATIC NEEDLE PLAN CHANGE
TOP AND BOTTOM THREAD CUTTER AT EACH SEWING POSITION
MATERIAL WIDTH UP TO 2700mm
TWO NEEDLE BARS
150mm SPACING
HANDWHEEL ADJUSTMENT OF HEIGHT OF PRESSER PLATE
ELECTRONIC THREAD BREAK DETECTOR FOR TOP AND BOTTOM THREADS
MATERIAL UNWIND DEVICE
RACKS FOR TOP AND BOTTOM THREAD
ONE CATWALK EACH ON FRONT AND REAR OPERATING SITE
TROUGH INFEED FOR UPPER MATERIAL WITH MOTOR-DRIVEN ROLLER SYSTEM
AUTOMATIC MARKING AND DETECTING UNIT FOR PATTERN CONFORM LATERAL CUT
ELECTRONICS AND MOTORS 400V, 3 PHASES
CONCRETE BASES AND VIBRATION DAMPERS

REFERENCE NUMBER: J-1761
CNC VERTICAL FAST WIRE FOAM CUTTING MACHINE WITH CONVEYOR

MAXIMUM TABLE LENGTH: 3000mm
MAXIMUM PROCESSING WIDTH: 1500mm
MAXIMUM BUN HEIGHT: 1200mm
WIRE SPEED: 0 TO 10 METERS/MINUTE
PROCESSING PRECISION: +/- 0.5mm
TOOL SIZE: 11,300mm
OPERATED WITH WINDOWS 7 PC
COMPRESSED AIR: 6 BAR
BLADE BREAK PROTECTION SYSTEM INCLUDED
SELF-DIAGNOSIS SYSTEM INCLUDED
VOTLAGE: 220/380/415V , 50/60Hz , 3-PHASE
TOTAL POWER: 9KW
TOTAL WEIGHT: 2500KG
MACHINE EXTERNAL DIMENSIONS: (L) 6200 x (W) 3700 x (H) 2500mm

LEAD TIME: APPROXIMATELY 25 DAYS FROM RECEIPT OF DEPOSIT
GUARANTEE: 1 YEAR

QUANTITY: 1