Search results for: 'Dia'

R-1732 MURATA VORTEX AIR JET SPINNING MACHINE WITH 80 SPINDLES, YEAR 2007

MURATA VORTEX AIR JET SPINNING MACHINE
YEAR: 2007
MODEL: MVS. 861
80 SPINDLES PER MACHINE
6 INCH TUBE TAKE UP
3 MURATEC SPLICERS PER FRAME
1 MURATEC AUTOMATIC DOFFERS
WITH FRONT YARN CONVEYORS
MURATEC “VOS II” YARN MANAGEMENT SYSTEM WAXING DEVICES SPINDLE INSTALLED: 1.3
(SPARE DIAMETER 1,1 & 1,2)
NEEDLE HOLDER: 2PZ8.8L8
NOZZLE: 4-HOLES ECO (Z)1
4 LINE SLIVER CREELS FOR 20 INCH DIAMETER CANS

QUANTITY: 3

M-5134 RIETER RSB D40 DRAW FRAME YEAR 2007

DRAW FRAME
RSB-D 40
INPUT DIAMETER 1000mm HT. 1200mm
CREEL FOR 8 CANS
OUTPUT CAN DIAMETER 500mm HT. 1070mm +/- 5mm
AUTOMATIC CAN CHANGER
VOLTAGE STABILIZER
CENTRAL LUBRICATION
AUTOMATIC FILTER CLEANING
WASTE REMOVAL ON TOP
QUALITY MONITOR RIETER

READY DELIVERY

QUANTITY: 1

C-4127 RIETER RING SPINNING MILL WITH 24000 SPINDLES, YEAR 2003 TO 2008

RIETER RING SPINNING MILL
24000 SPINDLES
YEAR: 2003 TO 2008

CONSISTING OF:
OPENING LINE:
OFFER 001
UNIFLOC A11
WASTE OPENER
UNICLEAN
UNIMIX
UNIFLEX
JOSSI VISION SHIELD 2
QUANTITY: 1

OFFER 002
CARDS:
C51
CHUTE FEED A70
IDF (INTEGRATED GRINDING SYSTEM)
CAN SIZE: 1000mm
QUANTITY: 18

OFFER 003
DRAW FRAME:
4 X RSB SB-D15
CAN SIZE 600mm
5 X RSB D35
CAN SIZE 500mm
QUANTITY: 9

OFFER 004
LAP WINDER:
E32
QUANTITY: 2

OFFER 005
COMBER:
5 X E62
6 X E65
QUANTITY: 11

OFFER 006
ROVING:
6 X F11
120 SPINDLES
6 X 16"
QUANTITY: 12

OFFER 007
RING FRAME:
G33
1200 SPINDLES
38mm RING DIA. (10)
40mm RING DIA. (10)
GAUGE: 70mm
QUANTITY: 20

OFFER 008
WINDER:
MURATA 21C
60 POSITIONS
57
YARN CLEARER LÖPFE TK940F
WAXING
QUANTITY: 8

QUANTITY: 1 MILL

C-3559 RIETER FINISHER DRAW FRAME WITH AUTO LEVELER RSB D-40, YEAR 2006

RIETER FINISHER DRAW FRAME
WITH AUTO LEVELER
MAKER: RIETER, SWITZERLAND
YEAR: 2006
MODEL: RSB D-40
WITH AUTO LEVELER
SILVER MONITOR
NUMBER OF DELIVERY: SINGLE
DELIVERY CAN SIZE: DIAMETER 20” X H 42”
AUTO CAN CHANGER
POWER CREEL TYPE
FEEDING CAN SIZE: DIAMETER 20”
CREEL LENGTH: 3,500mm
NUMBER OF DOUBLING: 8
INDIVIDUAL SUCTION TYPE

QUANTITY: 2 SETS

C-1426 COMPLETE RIETER G33 RING SPINNING PLANT 29,000 SPINDLES, YEAR 1996

RING FRAMES,
FLYERS AND DRAW FRAMES
INSTALLED YEAR 2000
BLOWROOM AND CARDS INSTALLED YEAR 1996

-RIETER BLOWROOM

RIETER UNIFLOC A10, 2300MM, 36.8M
ARGEMA ELECTRONIC METAL DETECTOR
RIETER WASTE OPENER B2/5
RIETER UNICLEAN B10
2 RIETER UNIMIX B7/3
4 RIETER UNIFLEX B7/3

PNEUMATIC FIBRE CONVEYANCE, EXHAUST FANS,
DUST EXTRACTOR FANS,
TRANSPORT FANS, 2 TWO-WAY DISTRIBUTORS,
4 HIGH SPEED BY-PASS VALVES
ELECTRICAL CONTROL PANEL

-RIETER CARDS

12 RIETER C50 CARDS WITH CHUTE FEED AEROFEED A7/U
AUTOMATIC WASTE REMOVAL SYSTEM,
TRANSPORT FANS, BY-PASS VALVES.
RINSING VALVES AND LOCKING VALVES

-RIETER DRAW FRAMES

4 RIETER DRAW FRAMES TYPE SB-D10, 20” X 42” CANS
4 RIETER DRAW FRAMES TYPE RSB-D30, 20” X 42” CANS

-RIETER ROVING FRAMES

8 RIETER ROVING FRAMES , TYPE F10, 120 SPINDLES
LUWA TRAVELLING CLEANERS

-RIETER RING FRAMES

30 RIETER G33 RING FRAMES, 960 SPINDLES
10 FRAMES RINGS 42MM DIA, 70MM GAUGE, LIFT 220MM

20 FRAMES RINGS 45MM DIA, 70MM GAUGE, LIFT 230MM
LUWA TRAVELLING CLEANERS

-CONE WINDING

8 MURATA CONE WINDERS, 60 HEADS EACH
(4 X TYPE 7-2 FROM 1985 AND 4 X 7-V FROM 1996)

-LABORATORY

USTER TESTER 4
USTER TENSORAPID UTR-3

-ACCESSORIES

OTIMA VACUUM STEAMER
COMPRESSORS,

PLANT IS RUNNING NOW
INSPECTION WELCOME ANY TIME

QUANTITY: 1

P-4881 LUCIA SOCKS KNITTING MACHINES YEAR 1987

LUCIA
SOCKS KNITTING MACHINES
YEAR: 1987
3 MACHINES – 168 NEEDLES, CYLINDER DIAMETER 3 ¾ INCHES
1 MACHINE – 176 NEEDLES, CYLINDER DIAMETER 4 INCHES

QUANTITY: 4

P-4880 RUMI HALLEY 2 SOCKS KNITTING MACHINE YEAR 1991

RUMI
MODEL: HALLEY 2
SOCKS KNITTING MACHINES
YEAR: 1991
8 MACHINES – 136 NEEDLES, CYLINDER DIAMETER 3 ¼ INCHES
8 MACHINES – 144 NEEDLES, CYLINDER DIAMETER 3 ¼ INCHES

QUANTITY: 16

REFERENCE NUMBER: K-8416

G1 TONELLO 330 "CENTRIFUGING" INDUSTRIAL WASHING MACHINE-USED

G1 TONELLO 330

“CENTRIFUGING” INDUSTRIAL WASHING MACHINE

FRONTAL TYPE

FOR CHEMICAL “STONE WASH”

CAPACITY LIT. 3.300

MOD. TONELLO G1 330

GENERAL DESCRIPTION:

TONELLO G1 IS A MACHINE WITH HIGH-SPEED HYDRO-EXTRACTION (600 R.P.M.) AND IT IS EQUIPPED WITH AUTOMATIC SELF-BALANCING SYSTEM

TONELLO G1 IS SUPPLIED WITH “SETTABLE INVERTER”

ROTATION SPEED FROM 0 TO 55 R.P.M

ALSO SETTING THE CENTRIFUGING SPEED FROM 0 TO 600 R.P.M.

WITH TIME OF CENTRIFUGE PROGRAMMABLE BY INDUSTRIAL PC

THE ACCESS MAIN DOOR TO THE DRUM IS VERY WIDE, IN ORDER TO EASY GARMENTS LOADING AND UNLOADING OPERATION

OPENING AND CLOSING ARE PNEUMATIC

DOUBLE TILTING SYSTEM FOR GARMENTS LOADING AND UNLOADING

DRIVING SYSTEM IS SITUATED ON THE UPPER PART OF THE MACHINE

WITH PROPER MATERIAL AND MOTORS SUITABLE TO WORK AT LOW AND HIGH R.P.M.

1 TANK FOR THE PREPARATION OF AUXILIARY PRODUCTS WITH CAPACITY OF LITTERS 180 EQUIPPED WITH ELECTRO-PUMP AND PNEUMATIC VALVES FOR THE SENT ONE

THE DRAINAGE IN DRAIN AND AUTOMATIC RINSES N° 2 WATER INLETS COMPLETE WITH PNEUMATIC VALVE- MECHANICAL WATER-COUNTER DIRECT HEATING AND COOLING SYSTEM

AUTOMATION WITH MICROPROCESSOR

TECHNICAL DATA TONELLO G1 330

DRUM DIMESION                           

-DRUM HOLING SHEET                                   mm                        4

THICKNESS         

-DIAMETER                                                   MM                       1900

-DEPTH                                                        MM                       1150

-VOLUME                                                      LT.                       3300

-DOOR DIAMETER                                           MM                       1020

-MAXIMUM LOADING                                        KG.                      120/130

CAPACITY           

BASKET SPIN SPEED                                        RPM                      0-600

DIRECT STEAM CONNECTION                               Ø                        1" 1/4

WATER INLET CONNECTION                                 Ø                        2 x 2

COMPRESSED AIR INLET                                     Ø                        1/4"

CONNECTION   

STEAM IN MAXIMUM PRESSUREBAR                      BAR                       6

WATER IN MAXIMUM PRESSURE                           BAR                       4

COMPRESSED AIR IN MAXIMUM                           BAR                       8

PRESSURE          

POWER INSTALLED                                           KW                        22

3-PHASE VOLTAGE                                           VOLT/HZ                 400/50

PRODUCTS TANK Ø 240 H 400                             LT.                         80

TANK RINSING VALVE                                         Ø                         1/2"

MACHINE SIZE                  

-WIDTH                                                          MM                        2500

-WIDTH WITH ELECTRICAL PANEL                         MM                        2980

-DEPTH                                                           MM                        2710

-HEIGHT                                                          MM                        3000

REFERENCE NUMBER: M-4239

BONINO CARDS OR PRODUCE RECYCLED YARN

1000mm WORKING WIDTH

COTTON CARD WITH BREAST

REVOLVING FLATS ON THE MAIN DRUM AND FIXED FLATS ON THE BREAST DRUM

BREAST DRUM 700mm, MAIN DRUM 1500mm, DOFFER 700mm DIAMETER

INTO 1MT DIAMETER COILER.

REFERENCE NUMBER: M-4327

BENNINGER ZELL SIZING MACHINE MODEL BEN-SIZETEC WORKING WIDTH 2200mm YEAR 1994

BENNINGER ZELL SIZING MACHINE  MODEL BEN - SIZETEC WORKING WIDTH 2200 mm

YEAR  1994, WITH SECTIONAL AND FRACTIONAL SYSTEM.

N° A13715

MODEL  BB-S/ZT4/4/TKD

1 SECTIONAL BEAM UNROLLING DEVICE MODEL SWA WITH LOADING CELL FOR MEASURING

THE OUT GOING TENSION .

ELECTRO PNEUMATIC BREAKING SYSTEM

MAXIMUM BEAM DIAMETER 1000 mm.

1 FRACTIONAL BEAMING UNROLLING DEVICE WITH CAPACITY UP TO 20 POSITIONS

ELECTRO PNEUMATIC BREAKING SYSTEM

1 SIZING BOX MODEL TDK WORKING WIDTH 2200 mm. TOTAL WIDTH 2400 mm

STAINLESS STEEL BOX WITH TOTAL CAPACITY OF 240 LITERS WITH DIRECT STEAM INJECTION

LOWER VESSELS WITH INDIRECT HEAT SYSTEM

AUTOMATIC SIZE BOX FEEDING

HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DRYING SECTION DEVICE MODEL ZT8 – WORKING WIDTH 2200 mm

6 DRYING STAINLESS STEEL CYLINDERS COVERED WITH TEFLON + 2 CYLINDERS WITHOUT TEFLON

4 ELECTRONIC TEMPERATURE REGULATIONS

2 AIR EXTRACTION

1 OIL/GREASE APPLICATION DEVICE MODEL CV

1 YARN SPLITTING DEVICE

7 RODS FOR SECTIONAL BEAMS

19 RODS FOR FRACTIONAL BEAMS

1 HUMIDITY MAHLO CONTROL DEVICE MODEL RMS-7S N°1670/1/10597

1 BEAM ROLLING DEVICE MODEL BB FOR BEAMS UP TO 1000 mm DIAMETER

YARN TRACTION MADE UP OF 3 ROLLS

1 PRESSURIZED ROLLER DEVICE

TENSION AND PRESSURE MEASURE DEVICES

AUTOMATIC BEAM LIFT DEVICE INCLUSIVE OF ADAPTORS FOR DIFFERENT BEAMS

EXTENSION REED FOR ENDS WIDTH CONTROL

MIRROR FOR EASY YARN CONTROL

1 HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DUST SUCTION DEVICE

1 COMPLETE SIZE KITCHEN PREPARATION INCLUDING 2 TANKS FOR SIZE STORAGE

1 FULLY AUTOMATIC BENSIZETEC PROCESS CONTROL DEVICE INCLUDING HARDWARE AND SOFTWARE

1 EXTERNAL ELECTRIC CABINET.