Search results for: 'Panel+c'

M-1696 MARGASA COMPLETE RECYCLING/TEARING LINE, YEAR 2012, WORKING WIDTH 1500mm

2 ROTARY CUTTERS TYPE CMT-900, WORKING WIDTH 900mm, INCLUDING FEEDING CONVEYORS.
1 ELECTRONIC METAL DETECTOR, MOUNTED ON FEEDING CONVEYOR OF THE 1ST CUTTER.
1 PNEUMATIC MATERIAL TRANSPORT WITH SPECIAL FAN FOR RAGS ETC.
1 STATIONARY ZIG-ZAG HUMP MAGNET MOUNTED IN TUBE FOR MATERIAL TRANSPORT.
2 MIXING/ RELAXING STORAGE BINS FOR CUTTED RAGS WITH SPRAYING ROOM
IN FRONT OF:
1 FEEDING MACHINE TYPE CCS-1500, WORKING WIDTH 1500mm, AUTOMATIC PNEUMATIC FEEDING FROM STORAGE BINS, ELECTRONIC LEVEL CONTROL AND DOSING CONVEYOR TO TEARING LINE.
1 RAG TEARING LINE WITH 4 SECTIONS TYPE MASTER MCM-1550-DD, WORKING WIDTH 1500mm, TAMBOUR DIAM. 1000mm.
1 ELECTRONIC CONTROL PANEL FOR THE WHOLE LINE INCL. TOUCH SCREEN AND INVERTER DRIVER FOR SEVERAL MOTORS.
6 FILTER UNITS.

- ALL EQUIPMENT “AS NEW” SINCE RUNNING ONLY A FEW HOURS.
- CAPACITY UP TO 1000KG/HR.

P-2661 KUSTERS E COMMERCE CYLINDER MERCERIZING MACHINE YEAR 1996 to 2002 WIDTH 1800mm

KUSTERS
TYPE: E COMMERCE
CYLINDER MERCERIZING MACHINE
YEAR: 1996 to 2002
ROLLER WIDTH: 2000mm
WORKING WIDTH: 1800mm
ENTRANCE FROM J-BOX WITH KUSTERS IMPREGNATION PADDER
CHEMICAL PRODUCT DISPATCH TANKS
CYLINDER
MERCERIZING BED – 7 MT
SQUEEZING PADDER
CHAIN DRUM FOR STABILIZATION
CYLINDER MERCERIZING BED – 7 MT
SQUEEZIND PADDER
2 INOX STEEL MEANDER WASHING UNIT
TYPE: 234.43
CLOTH CONTENT 15 MT EACH WITH REALTIVA PADDER LINEAR PRESSURE 50N/MIN
DOUBLE WINDER WITH J-BOX
GROUP PREPARATION OF WATER
CAUSTIC SODA WITH TANKS AND MIXER
METALIC FRAME
ELECTRIC AND CONTROL PANEL

QUANTITY: 1

C-1426 COMPLETE RIETER G33 RING SPINNING PLANT 29,000 SPINDLES, YEAR 1996

RING FRAMES,
FLYERS AND DRAW FRAMES
INSTALLED YEAR 2000
BLOWROOM AND CARDS INSTALLED YEAR 1996

-RIETER BLOWROOM

RIETER UNIFLOC A10, 2300MM, 36.8M
ARGEMA ELECTRONIC METAL DETECTOR
RIETER WASTE OPENER B2/5
RIETER UNICLEAN B10
2 RIETER UNIMIX B7/3
4 RIETER UNIFLEX B7/3

PNEUMATIC FIBRE CONVEYANCE, EXHAUST FANS,
DUST EXTRACTOR FANS,
TRANSPORT FANS, 2 TWO-WAY DISTRIBUTORS,
4 HIGH SPEED BY-PASS VALVES
ELECTRICAL CONTROL PANEL

-RIETER CARDS

12 RIETER C50 CARDS WITH CHUTE FEED AEROFEED A7/U
AUTOMATIC WASTE REMOVAL SYSTEM,
TRANSPORT FANS, BY-PASS VALVES.
RINSING VALVES AND LOCKING VALVES

-RIETER DRAW FRAMES

4 RIETER DRAW FRAMES TYPE SB-D10, 20” X 42” CANS
4 RIETER DRAW FRAMES TYPE RSB-D30, 20” X 42” CANS

-RIETER ROVING FRAMES

8 RIETER ROVING FRAMES , TYPE F10, 120 SPINDLES
LUWA TRAVELLING CLEANERS

-RIETER RING FRAMES

30 RIETER G33 RING FRAMES, 960 SPINDLES
10 FRAMES RINGS 42MM DIA, 70MM GAUGE, LIFT 220MM

20 FRAMES RINGS 45MM DIA, 70MM GAUGE, LIFT 230MM
LUWA TRAVELLING CLEANERS

-CONE WINDING

8 MURATA CONE WINDERS, 60 HEADS EACH
(4 X TYPE 7-2 FROM 1985 AND 4 X 7-V FROM 1996)

-LABORATORY

USTER TESTER 4
USTER TENSORAPID UTR-3

-ACCESSORIES

OTIMA VACUUM STEAMER
COMPRESSORS,

PLANT IS RUNNING NOW
INSPECTION WELCOME ANY TIME

QUANTITY: 1

C-2916 OSTHOFF SINGEING MACHINE U97/3, WIDTH 2,000mm, YEAR 2005

MAKER: OSTHOFF, GERMANY
YEAR: 2005
TYPE: U97/3
WORKING WIDTH: 2,000mm
COMPLETE SET WITH STANDARD ACCESSORIES
ENTRY WITH TENSIONING
ACCUMULATOR
OSTHOFF SINGEING UNIT
2 RAMPS
FUMES EXTRACTION
1 QUENCHING TANK
8 MT CONTENT
4 COOLING DRUMS
HIGH EFFICIENCY
SQUEEZING PADDER
ACCUMULATOR
EXIT WITH BATCHER CONTROL PANEL.
ELECTRIC PANELS

QUANTITY: 1

A-1790 TECTEX CROSS LAPPER, 2.5 METER x 4.0 METER

BRAND: TECTEX
SPEED: 50 METER PER MINUTE
COMPLETE OVERHAULED BY COMPANY BEMATIC
WITH NEW CABLES AN NEW CONTROL OPERATOR PANEL BEMATIC

QUANTITY: 1

REFERENCE NUMBER: C-4330
FARREL 4LMSD COMPOUNDING LINE, 500 VOLT, CAPACITY 1500 LB/HOUR

FARREL SIZE 4LMSD CONTINUOUS MIXER
1750 RPM DC MOTOR THRU A LUFKIN MODEL S64CH GEARBOX
LUWA MAAG VACOREX MODEL 90/90 GEAR PUMP
FARREL UP-150 HOT OIL HEATED DIE FACE PELLETIZER
BERINGER
GALA SPIN DRYER
GALA 60 GPM WATER SYSTEM
GALA
STERLCO HOT OIL TEMPERATURE CONTROL UNIT
K-TRON WEIGH BELT FEEDER
K-TRON T35 FEEDER
K-TRON S200 FEEDER
(1) 220 KVA
(1) 75 KVA
(1) 63 KVA TRANSFORMERS
AND (2) CONTROL PANELS
PLATFORM
CAPACITY: 1500 LB/HOUR
ABLE TO DO FILLER COMPOUNDING
MASTERBATCH COMPOUDING

QUANTITY: 1 LINE

V-1325 FEHRER NEEDLE LOOM MODEL NL21/S, WIDTH 3000mm, YEAR 1986 – 5000 NEEDLES/METER

NEEDLE LOOM
MAKE: FEHRER
MODEL: NL21/S
WIDTH: 3000mm
YEAR: 1986
NEEDLE PATTERN 2 X 5000 PATTERN K1 (300mm FRONT TO BACK)
TOTAL 6 SECTION BOARDS 1000mm WIDE EACH
STROKE 35mm
1800 RPM
OUTLET ROLLER 200mm DIAMETER

QUANTITY: 1

M-3729 BEMATIC THERMOBONDING LINE, WIDTH 2500mm, YEAR 2012

THERMOBONDING LINE
MAKE: BEMATIC
YEAR: 2012
WIDTH: 2500mm

OFFER 001
BEMATIC AC-1500 BALE OPENERS

OFFER 002
BEMATIC AF-700 OPENER/MIXER

OFFER 003
BEMATIC BLOW SM-2000 FEEDING TOWER AND MIXER

OFFER 004
BEMATIC BCV VOLUMETRIC HOPPER FEEDER

OFFER 005
BEMATIC HI 91 CARD

OFFER 006
TEXNOLOGY EVOLUTION CROSSLAPPER

OFFER 007
BOMBI MECCANICA TFP/2N/3/FB OVEN

OFFER 008
BOMBI MECCANICA TG2.9/3 SLITTING AND CROSS-CUTTING UNIT

QUANTITY: 1 LINE

C-4228 EREMA RM100TVE FILM/FIBER PELLETIZING LINE, EXTRUDER 100mm, YEAR 2000 - NEW

EREMA
MODEL: #RM100TVE FILM/FIBER PELLETIZING LINE NEW
YEAR: 2000
LINE CONSISTS OF THE FOLLOWING:
100mm (4″) EREMA
MODEL: #RM100TVE EXTRUDER
EXTRUDER IS DRIVEN BY A 132 KW AC MOTOR WITH INVERTER
EXTRUDER HAS ELECTRICALLY HEATED WATER COOLED BARREL
DUAL VENT
WITH EREMA STEEL VACUUM PUMP
TEMPERATURE CONTROL PANEL WITH EREMA SERIES 988 INSTRUMENTS (16 ZONE TOTAL)
AND EISENBLISS MODEL EG250 GEARBOX

QUANTITY: 1 LINE

C-4227 EREMA RM120TVE FILM/FIBER PELLETIZING LINE, EXTRUDER 120mm, YEAR 2000 - NEW

EREMA PELLETIZING LINE NEW
MODEL: RM120TVE FILM/FIBER
YEAR: 2000
LINE CONSISTS OF THE FOLLOWING:
EREMA MODEL RM120TVE
120mm EXTRUDER WITH 36/1 L/D DOUBLE VENTED BARREL
EXTRUDER IS DRIVEN BY A 160KW AC MOTOR WITH INVERTER
DOUBLE VENT INCLUDES A STAINLESS STEEL DEKER VACUUM PUMP
APPROXIMATELY 50 CUBIC FOOT STAINLESS STEEL CUTTER/COMPACTOR MOUNTED AT FEED SECTION
AND FED BY A 35″ WIDE X 20′ LONG INCLINED BELT CONVEYOR
CUTTER COMPACTOR DRIVEN BY A 105 KW
480 VOLT AC MOTOR

QUANTITY: 1 LINE