Search results for: 'ins'

M-0033 ROLANDO COMPLETE TEARING LINE YEAR 1994 WIDTH 2000mm - 2 CYLINDERS

WORKING WIDTH 2000mm
YEAR 1994
CONSISTING OF:
LOADING INSTALLATION
LIQUID RESP. OIL SPRAYING UNIT
AUTOMATIC FEEDING RA1/6mm 2000
TEARING MACHINE RM9 WITH 2 CYLINDERS, 2000mm

L-1212 CIBITEX SANFORIZER 2400mm YEAR 1992 RENEWED IN 2016

SANFORIZING MACHINE
MAKE: CIBITEX
YEAR: 1992
COMPLETELY RENEWED IN 2016
WIDTH: 2400mm

COMPONENTS OF THE MACHINE:
ENTRY
ROLLS OPENER
CENTRALIZER
STEAMER
UNIT SHRINKAGE
COOLING SYSTEM
NON-STOP WITH INSPECTION

QUANTITY: 1

A-2076 MONFORTS SANFORIZING LINE FOR KNITTING FABRICS, YEAR 1989, WIDTH 2200MM

MODEL: TOPTEX/W
YEAR: 1989
ROLLERS WIDTH: 2400 MM
WORKING WIDTH 2200 MM
RUBBER CONVEYOR BELT WIDTH: 2300 MM
RUBBER CONVEYOR BELT REPLACED IN 2014
RUBBER THICKNESS: 66 MM
FABRIC ENTRY FRAME WITH ADJUSTABLE FABRIC BRAKE DEVICE

ROLLING MACHINE
MAKE: TESTA
WITH INSPECTION TABLE FOR QUALITY CONTROL OF FABRICS

QUANTITY: 1

R-1732 MURATA VORTEX AIR JET SPINNING MACHINE WITH 80 SPINDLES, YEAR 2007

MURATA VORTEX AIR JET SPINNING MACHINE
YEAR: 2007
MODEL: MVS. 861
80 SPINDLES PER MACHINE
6 INCH TUBE TAKE UP
3 MURATEC SPLICERS PER FRAME
1 MURATEC AUTOMATIC DOFFERS
WITH FRONT YARN CONVEYORS
MURATEC “VOS II” YARN MANAGEMENT SYSTEM WAXING DEVICES SPINDLE INSTALLED: 1.3
(SPARE DIAMETER 1,1 & 1,2)
NEEDLE HOLDER: 2PZ8.8L8
NOZZLE: 4-HOLES ECO (Z)1
4 LINE SLIVER CREELS FOR 20 INCH DIAMETER CANS

QUANTITY: 3

C-1426 COMPLETE RIETER G33 RING SPINNING PLANT 29,000 SPINDLES, YEAR 1996

RING FRAMES,
FLYERS AND DRAW FRAMES
INSTALLED YEAR 2000
BLOWROOM AND CARDS INSTALLED YEAR 1996

-RIETER BLOWROOM

RIETER UNIFLOC A10, 2300MM, 36.8M
ARGEMA ELECTRONIC METAL DETECTOR
RIETER WASTE OPENER B2/5
RIETER UNICLEAN B10
2 RIETER UNIMIX B7/3
4 RIETER UNIFLEX B7/3

PNEUMATIC FIBRE CONVEYANCE, EXHAUST FANS,
DUST EXTRACTOR FANS,
TRANSPORT FANS, 2 TWO-WAY DISTRIBUTORS,
4 HIGH SPEED BY-PASS VALVES
ELECTRICAL CONTROL PANEL

-RIETER CARDS

12 RIETER C50 CARDS WITH CHUTE FEED AEROFEED A7/U
AUTOMATIC WASTE REMOVAL SYSTEM,
TRANSPORT FANS, BY-PASS VALVES.
RINSING VALVES AND LOCKING VALVES

-RIETER DRAW FRAMES

4 RIETER DRAW FRAMES TYPE SB-D10, 20” X 42” CANS
4 RIETER DRAW FRAMES TYPE RSB-D30, 20” X 42” CANS

-RIETER ROVING FRAMES

8 RIETER ROVING FRAMES , TYPE F10, 120 SPINDLES
LUWA TRAVELLING CLEANERS

-RIETER RING FRAMES

30 RIETER G33 RING FRAMES, 960 SPINDLES
10 FRAMES RINGS 42MM DIA, 70MM GAUGE, LIFT 220MM

20 FRAMES RINGS 45MM DIA, 70MM GAUGE, LIFT 230MM
LUWA TRAVELLING CLEANERS

-CONE WINDING

8 MURATA CONE WINDERS, 60 HEADS EACH
(4 X TYPE 7-2 FROM 1985 AND 4 X 7-V FROM 1996)

-LABORATORY

USTER TESTER 4
USTER TENSORAPID UTR-3

-ACCESSORIES

OTIMA VACUUM STEAMER
COMPRESSORS,

PLANT IS RUNNING NOW
INSPECTION WELCOME ANY TIME

QUANTITY: 1

S-1292 WARTSILA, 4 X 8.73MW NATURAL GAS CHP POWER PLANT, YEAR 2005, 50Hz

35MW (4 X 8.73MW WARTSILA NATURAL GAS CHP POWER PLANT FOR SALE)
50HZ
THE PLANT CONSISTS OF 4 ENGINES AND 4 BOILERS WITH ALL ACCESSORIES INCLUDED
ALL 4 WARTSILA 20V34SG 8.7MW (NATURAL GAS) ENGINES WERE INSTALLED UP RUNNING IN 2005. BOILERS ARE MADE BY AALBORG.
13BAR PRESSURE
4.7TON/H STEAM GENERATION

QUANTITY: 1

A-2064 BRUCKNER STENTER RANGE, YEAR 2005, WIDTH 2200MM, VERTICAL PIN CHAIN, 5 CHAMBER, GAS FIRED

YEAR: 2005
WORKING WIDTH: 2200 mm
VERTICAL PIN CHAIN
5 CHAMBER
GAS FIRED
BRUCKNER PADDER
LONG ENTRY
E&L ELS GUIDER
COOLING ZONE AT EXIT
EDGE CUTTER WITH E&L
EXIT ON TO A CORINO INSECTION AND WINDER

QUANTITY: 1

M-6247 OSTHOFF SP-80 SINGEING MACHINE YEAR 1980

SINGEING MACHINE
MAKE: OSTHOFF
MODEL: SP 80
YEAR: 1980
WORKING WIDTH: 1800mm TO 2000mm
(BURNER WIDTH 2400mm, ROLLER WIDTH INSIDE SINGEING BOX 2300mm)
ROLLER AND CYLINDER WIDTH AFTER SINGEING BOX 2100mm
FABRIC ENTRY WITH GUIDE ROLLERS AND TENSIONING DEVICE
OSTHOFF SINGEING MACHINE WITH 2 x DOUBLE JET BURNERS FOR FACE AND BACK SINGEING
DUST SUCTION FAN WITH EXHAUST
DESIZING TANK WITH 4 BOTTOM AND 4 TOP SS ROLLERS
1 x SS PREPARATION VESSEL
EXIT WITH PLAITER
3 TROLLEYS FOR THE FABRIC INCLUDED IN LINE
380V, 50HZ
UPGRADED ELECTRIC CONTROL BOX AND PB GAS DELIVERY UNITS

CONDITION: GOOD

QUANTITY: 1

M-1947 OSTHOFF SINGEING MACHINE MODEL VP99 (6413) YEAR 2005 WIDTH 2100mm

OSTHOFF SINGEING MACHINE
MODEL VP99 (6413)
YEAR 2005
WIDTH 2100mm
NATURAL GAS HEATING
GAS PRESSURE 0,3 – 3 BAR
GAS CONSUMPTION 20 М³/HOUR
COLD WATER CONSUMPTION 2,2
M³/HOUR ± 10%
INSTALLED POWER 23 KW
FABRIC INTRODUCTION
SYSTEM WITH ACCUMULATOR FOR ROLLS CHANGING WITHOUT INTERRUPTION OF WORKING
CLEANING SYSTEM WITH DUST DETECTOR
DOUBLE RAMP
DOUBLE BRUSHING GROUP
2- BENNINGER EXTRACTA CLOSED WASHING DEVICE FOR FABRIC IMPREGNATION WITH A SOLUTION FOR THE NEXT DESIZING
EXIT ON THE ROLL
AUTOMATIC SYSTEM FOR PROCESS COMMAND
SPEED: 10 TO 100 M/MIN

QUANTITY: 1

P-4825 COGNETEX/SANT’ ANDREA PREPARATION LINE & COGNETEX SAVIO SPINNING LINE

ITEM 001
COGNETEX
TYPE: SCE11VA
PREPARATION
ELECTRONIC AUTO AND AUTOMATIC REMOVAL
EXIT 1000 x 1200
QUANTITY: 1

ITEM 002
COGNETEX
TYPE: SC11VA
STIRATOIO
ELECTRONIC AUTO AND AUTOMATIC REMOVAL
EXIT 1000 x 1200
QUANTITY: 1

ITEM 003
COGNETEX
TYPE: SC420/22V
STIRATOIO
ELECTRONIC AUTO AND AUTOMATIC REMOVAL
EXIT 800 x 1200
QUANTITY: 1

ITEM 004
SANT’ ANDREA
TYPE: SH22 (ROTARY HEAD)
PREPARATION
EXIT 800 x 1200
QUANTITY: 1

ITEM 005
SANT’ ANDREA
TYPE: RF2B
FINISHER
24 BOBBINS
SPINDLE 330mm
AUTOMATIC DISCHARGE
QUANTITY: 1

ITEM 006
COGNETEV
SPINNING/WINDING MACHINE
WITH 630 SPINDLES (.55mm x 82.5mm)
AUTOMATIC DISCHARGE LINKED WITH SAVIO
TYPE: ESPERO
24 HEADS
WITH INSPECTOR CONTROL AND BLOWING MAGITEX
ALSO INCLUDED ELECTRONIC SENSOR
PEYER PS31
QUANTITY: 2

QUANTITY: 1 LINE