Search results for: 'Compl'

P-3408 OSTHOFF ST80 SINGEING MACHINE YEAR 1990 WIDTH 1800mm

OSTHOFF
MADE: GERMANY
TYPE: ST80
SINGEING MACHINE
YEAR: 1990 (COMPLETELY OVERHAULED IN 2001)
WORKING WIDTH: 1800mm
ROLLER WIDTH: 2000mm

CONSISTED OF FOLLOWING PARTS:
BEATING AND BRUSHING UNITS FOR FILTER
FEED KF10
SINGEING UNITS WITH 2 BURNERS
BEATING AND BRUSHING UNIT TYPE V899 (YEAR 2001)
DESIZING THROUGH WITH 5 m CAPAPCITY
SQUEEZER MENZEL
BIG BATCHER

QUANTITY: 1 SET

K-2582 SIEMENS COAL AND BIOMASS POWER PLANT 2.5MW YEAR 2002

WAS BUILT TO SUPPLY THE PAPER MILL WITH STEAM AND ELECTRICITY

MAKE: SIEMENS
MODEL: CFR5 G6a
2.5MW
65 BAR
480 ˚ C
REVOLUTION NUMBER: 23000 U PER MINUTE
EVAPORATION PRESSURE: 1-10 BAR
YEAR 2002
THE STEAM TUBINE AND THE GENERATOR WERE CHANGES AND ARE NEW
HOURS: LESS THAN 30,000
BOILER SYSTEM WAS COMPLETELY RECONDITIONED
THE WATER TREATMENT PLANT WAS RECONDITIONED
EXHAUST CLEANING SYSTEM WAS RECONDITIONED
ASH AND COAL TRANSPORTATION SYSTEMS WERE RECONDITIONED

QUANTITY: 1

P-4879 KRANTZ STENTER YEAR 1989 WIDTH 2200mm 5 CHAMBERS

KRANTZ
STENTER
YEAR: 1989 (COMPLETELY REFURBISHED 2006)
WORKING WIDTH: 2200mm
ENTRY FROM TROLLEY OR A-FRAME
BIANCO INFEED UNIT, YEAR 2006

QUANTITY: 1

REFERENCE NUMBER: K-8416

G1 TONELLO 330 "CENTRIFUGING" INDUSTRIAL WASHING MACHINE-USED

G1 TONELLO 330

“CENTRIFUGING” INDUSTRIAL WASHING MACHINE

FRONTAL TYPE

FOR CHEMICAL “STONE WASH”

CAPACITY LIT. 3.300

MOD. TONELLO G1 330

GENERAL DESCRIPTION:

TONELLO G1 IS A MACHINE WITH HIGH-SPEED HYDRO-EXTRACTION (600 R.P.M.) AND IT IS EQUIPPED WITH AUTOMATIC SELF-BALANCING SYSTEM

TONELLO G1 IS SUPPLIED WITH “SETTABLE INVERTER”

ROTATION SPEED FROM 0 TO 55 R.P.M

ALSO SETTING THE CENTRIFUGING SPEED FROM 0 TO 600 R.P.M.

WITH TIME OF CENTRIFUGE PROGRAMMABLE BY INDUSTRIAL PC

THE ACCESS MAIN DOOR TO THE DRUM IS VERY WIDE, IN ORDER TO EASY GARMENTS LOADING AND UNLOADING OPERATION

OPENING AND CLOSING ARE PNEUMATIC

DOUBLE TILTING SYSTEM FOR GARMENTS LOADING AND UNLOADING

DRIVING SYSTEM IS SITUATED ON THE UPPER PART OF THE MACHINE

WITH PROPER MATERIAL AND MOTORS SUITABLE TO WORK AT LOW AND HIGH R.P.M.

1 TANK FOR THE PREPARATION OF AUXILIARY PRODUCTS WITH CAPACITY OF LITTERS 180 EQUIPPED WITH ELECTRO-PUMP AND PNEUMATIC VALVES FOR THE SENT ONE

THE DRAINAGE IN DRAIN AND AUTOMATIC RINSES N° 2 WATER INLETS COMPLETE WITH PNEUMATIC VALVE- MECHANICAL WATER-COUNTER DIRECT HEATING AND COOLING SYSTEM

AUTOMATION WITH MICROPROCESSOR

TECHNICAL DATA TONELLO G1 330

DRUM DIMESION                           

-DRUM HOLING SHEET                                   mm                        4

THICKNESS         

-DIAMETER                                                   MM                       1900

-DEPTH                                                        MM                       1150

-VOLUME                                                      LT.                       3300

-DOOR DIAMETER                                           MM                       1020

-MAXIMUM LOADING                                        KG.                      120/130

CAPACITY           

BASKET SPIN SPEED                                        RPM                      0-600

DIRECT STEAM CONNECTION                               Ø                        1" 1/4

WATER INLET CONNECTION                                 Ø                        2 x 2

COMPRESSED AIR INLET                                     Ø                        1/4"

CONNECTION   

STEAM IN MAXIMUM PRESSUREBAR                      BAR                       6

WATER IN MAXIMUM PRESSURE                           BAR                       4

COMPRESSED AIR IN MAXIMUM                           BAR                       8

PRESSURE          

POWER INSTALLED                                           KW                        22

3-PHASE VOLTAGE                                           VOLT/HZ                 400/50

PRODUCTS TANK Ø 240 H 400                             LT.                         80

TANK RINSING VALVE                                         Ø                         1/2"

MACHINE SIZE                  

-WIDTH                                                          MM                        2500

-WIDTH WITH ELECTRICAL PANEL                         MM                        2980

-DEPTH                                                           MM                        2710

-HEIGHT                                                          MM                        3000

REFERENCE NUMBER: M-4327

BENNINGER ZELL SIZING MACHINE MODEL BEN-SIZETEC WORKING WIDTH 2200mm YEAR 1994

BENNINGER ZELL SIZING MACHINE  MODEL BEN - SIZETEC WORKING WIDTH 2200 mm

YEAR  1994, WITH SECTIONAL AND FRACTIONAL SYSTEM.

N° A13715

MODEL  BB-S/ZT4/4/TKD

1 SECTIONAL BEAM UNROLLING DEVICE MODEL SWA WITH LOADING CELL FOR MEASURING

THE OUT GOING TENSION .

ELECTRO PNEUMATIC BREAKING SYSTEM

MAXIMUM BEAM DIAMETER 1000 mm.

1 FRACTIONAL BEAMING UNROLLING DEVICE WITH CAPACITY UP TO 20 POSITIONS

ELECTRO PNEUMATIC BREAKING SYSTEM

1 SIZING BOX MODEL TDK WORKING WIDTH 2200 mm. TOTAL WIDTH 2400 mm

STAINLESS STEEL BOX WITH TOTAL CAPACITY OF 240 LITERS WITH DIRECT STEAM INJECTION

LOWER VESSELS WITH INDIRECT HEAT SYSTEM

AUTOMATIC SIZE BOX FEEDING

HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DRYING SECTION DEVICE MODEL ZT8 – WORKING WIDTH 2200 mm

6 DRYING STAINLESS STEEL CYLINDERS COVERED WITH TEFLON + 2 CYLINDERS WITHOUT TEFLON

4 ELECTRONIC TEMPERATURE REGULATIONS

2 AIR EXTRACTION

1 OIL/GREASE APPLICATION DEVICE MODEL CV

1 YARN SPLITTING DEVICE

7 RODS FOR SECTIONAL BEAMS

19 RODS FOR FRACTIONAL BEAMS

1 HUMIDITY MAHLO CONTROL DEVICE MODEL RMS-7S N°1670/1/10597

1 BEAM ROLLING DEVICE MODEL BB FOR BEAMS UP TO 1000 mm DIAMETER

YARN TRACTION MADE UP OF 3 ROLLS

1 PRESSURIZED ROLLER DEVICE

TENSION AND PRESSURE MEASURE DEVICES

AUTOMATIC BEAM LIFT DEVICE INCLUSIVE OF ADAPTORS FOR DIFFERENT BEAMS

EXTENSION REED FOR ENDS WIDTH CONTROL

MIRROR FOR EASY YARN CONTROL

1 HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DUST SUCTION DEVICE

1 COMPLETE SIZE KITCHEN PREPARATION INCLUDING 2 TANKS FOR SIZE STORAGE

1 FULLY AUTOMATIC BENSIZETEC PROCESS CONTROL DEVICE INCLUDING HARDWARE AND SOFTWARE

1 EXTERNAL ELECTRIC CABINET.

REFERENCE NUMBER: M-2072

CONE PACKING MACHINE -BRAND ZANCANER MODEL ROCBOX

PACKING MACHINE

MACHINE FOR CONES PACKING ZANCANER MODEL ROCBOX

PROCEDURE:

NYLON IS PLACED AROUND THE CONE WHICH CLOSES PACKAGES WITH NYLON INSIDE THE CONE

AUTOMATICALLY POSITIONS THE CONES IN BOXES AND THE SEPARATOR BETWEEN LINES - YEAR 1989.

AUTOMATIC CLOSING OF THE BOXES, ELECTRONIC WEIGHING, WITH COMPUTER TO PRINT

LABEL AND MANUALLY IS GLUED TO THE BOX -YEAR 2010.

UPDATE COMPLETE ON THE MACHINE MADE IN 2010

QUANTITY: 1 

C-4294 AUTOMATEX CROSS LAPPER, SPEED 65 M/MIN, WIDTH EXIT 3500mm, YEAR 2006

CROSS LAPPER
BRAND: AUTOMATEX
MODEL: FA 3000 TC
YEAR: 2006
YEAR COMPLETE RENEWED: 2010 FROM COMPANY AUTOMATEX
SPEED: 65 M/MIN
WIDTH ENTRANCE: 3000mm
WIDTH EXIT: 3500mm
IN THIS MACHINERY THE TIMING BELTS
AND CONVEYOR BELTS ARE IN GOOD CONDITIONS
WE WILL DISMANTLED PERSONALLY
AND THERE WILL BE ALSO ALL THE ELECTRICAL CABLES

QUANTITY: 1

A-1791 AUTOMATEX FA 2000 CROSS LAPPER, YEAR 1997

RENEWED IN 2009
WIDTH ENTRANCE: 3000 mm
WIDTH EXIT: 4500 mm
THE MACHINE IS DISMANTLED PERSONALLY
IT’S COMPLETE WITH ALL THE COMPANENTS
ALL ELECTRICAL CABLES
NEED TO REPLACE ONLY THE BELTS AND THE CONVEYOR BELT

QUANTITY: 1

C-4038 CATERPILLAR 5080 FRONT SHOVEL, YEAR 1999, WITH ACTUAL 24503 HOURS

CATERPILLAR 5080 FRONT SHOVEL
YEAR: 1999
CATERPILLAR 5080
FRONT SHOVEL
24,503 FRAME HOURS

QUANTITY: 1

P-2698 PICANOL GAMMA YEAR 1999 to 2000 WIDTH 2200mm & 1900mm DOBBY

QUANTITY: 72 SETS