Search results for: 'loom width 3'
- Related search terms
- Loom
- loom wi
- loom width 2
- Loom?
- loom+width
-
C-2238 PICANOL RAPIER LOOM GAMMA-R, WIDTH 1900mm, YEAR 1997, STAUBLI DOBBY, 8 COLORSC-2238 PICANOL RAPIER LOOM GAMMA-R, WIDTH 1900mm, YEAR 1997, STAUBLI DOBBY, 8 COLORS
TYPE: GAMMA-R
YEAR: 1997
QUANTITY: 12
Learn More -
C-4011 FEHRER NL 9/S NEEDLE LOOM, WORK WIDTH 4400mm, YEAR 1982C-4011 FEHRER NL 9/S NEEDLE LOOM, WORK WIDTH 4400mm, YEAR 1982
MAKE: FEHRER
TYPE: NL9/S
YEAR: 1982
WORK WIDTH: 4400mmQUANTITY: 1
Learn More -
M-6035 FEHRER PRENEEDLE LOOM WORKING WIDTH 8200mm YEAR 1995M-6035 FEHRER PRENEEDLE LOOM, WORKING WIDTH 8200mm, YEAR 1995
PRENEEDLE LOOM
MAKE: FEHRER AG
MODEL: NL 9/S + FFS
WORKING WIDTH: 8200mm
YEAR OF CONSTRUCTION: 1995QUANTITY: 1
Learn More -
J-0051 FEHRER PRE-NEEDLE LOOM YEAR 1995 WIDTH 8000mmREFERENCE NUMBER: J-0051 (1313NMMCXX12) J FEHRER PRE-NEEDLE LOOM YEAR 1995 WIDTH 8000mm MAKE: FEHRER TYPE: NL 9/S YEAR: 1995 WIDTH: 8000mm QUANTITY AVAIALBLE: 1 Learn More -
M-3378 TSUDAKOMA AIRJET ZAX-N 2R WIDTH 3600mm YEAR 2008 -CAM BOX -6 CAMSREFERENCE NUMBER: M-3378 (880520EAQ7UX) K TSUDAKOMA AIRJET ZAX-N 2R WIDTH 3600mm YEAR 2008 -CAM BOX -6 CAMS AIRJET TSUDAKOMA ZAX-N 2R 360CM YEAR 2008 ELECTRONIC STAUBLI CAM BOX 1651 6 SHAFTS WORKING WIDTH 3600 mm EACH LOOMS EQUIPPED WITH 6 HEALD FRAME INSTALLED 2 WEFT ACCUMULATORS WITH CRELL 2.5 WARP BEAM DIAM 800mm 1 BATCHING MOTION DIAM 1400mm 2 EDGE THAKING 1 MIDLE THAKING 06 WARP STOP BAR 4,000 PCS HEDDLES WIRE 4,000 DROPPER WIRES QUANTITY AVAILABLE: 16 Learn More
-
R-7443 STARLINGER HDN4 CIRCULAR LOOMSR-7443 STARLINGER HDN4 CIRCULAR LOOMS
BRAND STARLINGER
Learn More
MODEL HDN4
WORKING WIDTH 200 TO 850mm, 700 TO 850mm
STATUS AVAILABLE
THICKNESS: 20 TO 75
TOPICS PER MIN: 640
SPEED: 160 U / MIN
COILS THREAD
DIAMETER EXT. COIL: 35mm (25,31,38, ...)
LENGTH OF COIL 218mm STANDARD (270mm)
DIAMETER EXT. COILS MAX: 100mm
LENGTH OF BOBBIN: 200mm (250mm)
INNER DIAMETER. COILS: 35mm (25,31,38, ...)
COIL LENGTH: 218mm
COIL DIAMETER MAX: 160mm
COIL LENGTH: 200mm -
M-4676 DORNIER PTV WITH JACQUARD YEAR 2002-2003 WIDTH 3200mm
REFERENCE NUMBER: M-4676 (111163TYD10RC) L DORNIER PTV WITH JACQUARD YEAR 2002-2003 WIDTH 3200mm DORNIER PTV WITH JACQUARD 3200mm (4) X YEAR 2002 (4) X YEAR 2003 STAUBLI JACQUARD CX870 2688 HOOKS 66 DENSITY HARNESS ARE NEWLY CHANGED QUANTITY AVAILABLE: 8
Learn More -
AUTOMATEX, SPINNBAU NEEDLE PUNCH LINEREFERENCE NUMBER: T-6840 AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE BRAND: AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE CONSISTING OF: BLEND LINE, 60” WIDE, 4 HOPPERS WITH 12 HEAVY DUTY EXTENDED APRONS & NEW ELECTRONIC WEIGHING SYSTEM (2016). ALL MACHINES COMPLETELY RECONDITIONED IN 2016. OMMI STACK RESERVE, AUTOMATIC COMBO 332, YEAR 2000 SPINNBAU CARD, 2500mm, DOUBLE DOFFER, YEAR 1995, REPORTED ~1500 TO 1800 PPH CAPACITY DEPENDING UPON PRODUCT. AUTOMATEX FA/3000 TC CROSSLAPPER, YEAR 1997, AC DRIVES. BATT DRAFTER, 12 ROLLS. AUTOMATEX PR-100/T PRE-NEEDLER, 60mm STROKE, YEAR 1997 DRAFTER, 5 ROLLS. AUTOMATEX AG 154/TB NEEDLE LOOM, QUAD PUNCH, 50mm STROKE, YEAR 1997 FOUR ROLL STRETCH. METAL DETECTOR. ENTEX TENTER WITH VERTICAL IR HEAT BANKS, YEAR 1997 WINDER, YEAR 1997 PERKINS 4 ROLL CALENDER, NO STEEL ROLLS OR HEAT SYSTEM INCLUDED BUT MIGHT BE NEGOTIATED. EHHARDT+LEIMER GUIDER MODEL SE 11062, YEAR 2013 ENTEC WINDER, YEAR 1997 FINISHED WIDTH REPORTED OF 210" BUT COULD GO WIDER. LINE RAN PRIMARILY GEOTEXTILE & BEDDING PRODUCTS FROM 4.5 TO 10 OZ/YD. QUANTITY: 1 Learn More -
A-1641 DILO SD 45 STRUCTURAL NEEDLE LOOM, WIDTH 4500mm, YEAR 1973A-1641 DILO SD 45 STRUCTURAL NEEDLE LOOM, WIDTH 4500mm, YEAR 1973
TYPE: SD 45
WIDTH: 4500 mm
YEAR: 1973
EL: 380 / 3 / 50QUANTITY: 1
Learn More -
V-1179 TSUDAKOMA ZAX AIR JET LOOMS, YEARS 1996 AND 1997, CAM, 3300mmREFERENCE NUMBER: V-1179
Learn More
TSUDAKOMA ZAX AIR JET LOOMS, YEARS 1996 AND 1997, CAM, 3300mm
YEARS 1996 AND 1997
WORKING WIDTH 3300mm
QUANTITY: 23