Search results for: 'Proj'

REFERENCE NUMBER: L-1427

SCREW FEED 6FT
PART #: 99030A276

BRONZE NUT – 2 PIECES
PART #: 95072A361

MOUNTING FLANGE – 2 PIECES
PART #: 95082A644

¾ INCH SCREW FEED 6FT
PART #: 99030A275

BRONZE NUT – 2 PIECES
PART #: 59072A351

MOUNTING FLANGE – 2 PIECES
PART #: 325895082A643

CONVEYOR BELT 45FT
PART #: 5999K5

FLANGE MOUNT BEARINGS – 16 PIECES
PART #: 5968K75

PILLOW BLOCK BEARINGS – 4 PIECES
PART #: 7728756

CHAIN – 50 FT
PART #: 6261K173

SPROKETS – 10 PIECES
PART #: 6733K146


AIR CYLINDER
PART #: 6498K662

AIR CYLINDER
PART #: 6498K232

1 X 2 TUBING – 250 FT
PART #: N/A

2 3/8” FLAT STEEL – 60 FEET
PART #: N/A

SHEET STEEL – 4FT X 8FT X ¼” – 2 PIECES
PART #: N/A

SHEET STEEL – 18 GAUGE – 4FT X 8FT – 5 PIECES
PART #: N/A

1 5/8 COLD ROLL SOLID – 40FT
PART #: N/A

1 INCH COLD ROLL SOLID – 20FT
PART #: N/A

3 INCH COLD ROLL SOLID
PART #: N/A

M-5072 SULZER P7250 & P7200 PROJECTILE WEAVING MACHINES FOR TERRY, YEAR 1999 TO 2001

OFFER 001
SULZER P7250 F4 SPE D1
PROJECTILE WEAVING MACHINES FOR TERRY
YEAR: 2001
EQUIPPED FOR 2 WIDTH WEAVING FROM 2 HALF BEAMS OF WARP
AND 2 HALF BEAMS OF WEFT
EACH MACHINE HAS ONE FULL SET OF SPARE BEAMS (2 FOR WARP AND 2 FOR WEFT)
ALL MACHINES COMPLETE WITH 3 IRO EACH LOOM
ALL MACHINES ARE STILL RUNNING
AND IN EXCELLENT CONDITION

QUANTITY: 2

OFFERR 002
SULZER P7200 F4 SPED1
PROJECTILE WEAVING MACHINES FOR TERRY
YEAR: 1999
WIDTH: 3630mm
EQUIPPED FOR 2 WIDTH WEAVING FROM 2 HALF BEAMS OF WARP
AND 2 HALF BEAMS OF WEFT
EACH MACHINE HAS ONE FULL SET OF SPARE BEAMS (2 FOR WARP AND 2 FOR WEFT)
ALL MACHINES COMPLETE WITH 3 IRO EACH LOOM
ALL MACHINES ARE STILL RUNNING
AND IN EXCELLENT CONDITION

QUANTITY: 4

REFERENCE NUMBER: T-6543

MEDICAL UNIVERSAL TENSILE TESTING EQUIPMENT

SHANDONG INDEPENDENTLY RESEARCH AND DEVELOPMENT THIS COMPREHENSIVE TESTING MACHINE FOR SURGICAL MASK & PROTECTIVE CLOTHING, IT IS WIDELY USED IN A VARIETY OF MASK STRENGTH DETECTION PROJECTS.FEATURES:COMPLY WITH NATIONAL STANDARDS, MEDICAL STANDARDS TESTING REQUIREMENTS, AUTOMATIC SOFTWARE CONTROL SYSTEM, MEET THE REQUIREMENTS OF DATA STORAGE, PRINTING, COMPARISON. THE IMPORTED SERVO MOTOR IS EQUIPPED WITH PRECISION SCREW DRIVE SYSTEM TO ENSURE THE STABILITY OF TEST DATA.

TEST STANDARDS:

GB 19082-2009 TECHNICAL REQUIREMENTS FOR DISPOSABLE PROTECTIVE CLOTHING FOR MEDICAL USE (4.5 BREAKING STRENGTH -THE BREAKING STRENGTH OF MATERIALS IN KEY PARTS OF PROTECTIVE CLOTHING SHOULD NOT BE LESS THAN 45N)

(4.6 ELONGATION AT BREAK -THE ELONGATION AT BREAK OF KEY PARTS OF PROTECTIVE CLOTHING SHOULD NOT BE LESS THAN 15%)

SELF-PRIMING FILTER RESPIRATOR FOR RESPIRATORY PROTECTION ARTICLES5.6.2 BREATHING BONNET -BREATHING BONNET SHALL BE SUBJECT TO AXIAL TENSION"DISPOSABLE MASK: 10N FOR 10S" "REPLACEABLE MASK: 50N FOR 10S"

(5.9 HEADBAND -HEADBAND SHOULD BEAR THE TENSION "DISPOSABLE MASK: 10N, 10S" "REPLACEABLE HALF MASK: 50N FOR 10S" "FULL MASK: 150N FOR 10S")

5.10 JOINTS AND CONNECTING PARTS -JOINTS AND CONNECTING PARTS SHALL BE SUBJECT TO AXIAL TENSION

"REPLACEABLE HALF MASK: 50N FOR 10S" "FULL COVER 250N FOR 10S"

GB/T 32610-2016 TECHNICAL SPECIFICATION FOR DAILY PROTECTIVE MASKS

(6.9 BREAKING STRENGTH OF THE MASK BELT AND THE CONNECTION BETWEEN THE MASK BELT ANDTHE MASK BODY ≥ 20N)

(6.10 FASTNESS TO BREATHING BONNET: NO SLIPPAGE, BREAKAGE OR DEFORMATION SHALL OCCUR)

YY/T 0699-2013 DISPOSABLE SURGICAL MASK

(4.4 MASK BELT -THE BREAKING FORCE AT THE CONNECTION POINT BETWEEN EACH MASK BELT AND THE MASK BODY IS NOT LESS THAN 10N)

YY 0469-2011 SURGICAL MASK FOR MEDICAL USE (5.4.2 MASK BELT)

GB/T 3923.1-1997 DETERMINATION OF BREAKING STRENGTH AND ELONGATION AT BREAK OF FABRICS (STRIP METHOD)

DISPOSABLE RUBBER INSPECTION GLOVES (6.3 TENSILE PROPERTIES)

INSTRUMENT TECHNICAL PARAMETERS:

SPECIFICATION: 200N (STANDARD) 50N, 100N, 500N, 1000N (OPTIONAL)

ACCURACY: BETTER THAN 0.5RESOLUTION OF FORCE VALUE: 0.1N

DEFORMATION RESOLUTION: 0.001mm

TEST SPEED: 0.01mm/MIN ~ 2000mm/MIN (STEPLESS SPEED REGULATION)

WIDTH OF SAMPLE: 30mm (STANDARD FIXTURE) 50mm (OPTIONAL FIXTURE)

CLAMPING OF SAMPLES: MANUAL (PNEUMATIC CLAMPING CAN BE CHANGED)

STROKE: 700mm (STANDARD) 400mm, 1000mm (OPTIONAL)

QUANTITY: 1

REFERENCE NUMBER: T-6544

SYNTHETIC BLOOD PENETRATION TESTER FOR SURGICAL MASK

TECHNICAL INDICATORS:

1. THE PROTRUDING SAMPLE FIXING DEVICE CAN SIMULATE THE ACTUAL USE STATE OF THE MASK, SET ASIDE THE TEST TARGET AREA WITHOUT DESTROYING THE SAMPLE, AND DISTRIBUTE THE SYNTHETIC BLOOD IN THE TARGET AREA OF THE SAMPLE.

2. THE SPECIAL FIXED-PRESSURE INJECTION DEVICE CAN EJECT A CERTAIN VOLUME OF SYNTHETIC BLOOD IN A CONTROLLED TIME.

3. IT CAN FULLY SIMULATE THE INJECTION SPEED CORRESPONDING TO THE AVERAGE BLOOD PRESSURE OF HUMAN BODY OF 10.6KPA, 16KPA AND 21.3KPA.

4. A FIXED TARGET PLATE IS SET TO BLOCK THE HIGH-PRESSURE EDGE PART OF THE INJECTED LIQUID FLOW AND ONLY ALLOW THE STEADY FLOW PART TO BE SPRAYED ON THE SAMPLE, WHICH INCREASES THE ACCURACY AND REPEATABILITY OF THE LIQUID VELOCITY SPRAYED ON THE SAMPLE.

STANDARDS:

MEDICAL RESPIRATOR TECHNICAL REQUIREMENTS, 5.5 SYNTHETIC BLOOD PENETRATION BARRIER PERFORMANCE

YY/T 0691-2008 INFECTIOUS PATHOGEN PROTECTION EQUIPMENT MEDICAL MASK RESISTANCE TO SYNTHETIC BLOOD PENETRABILITY TEST METHOD (FIXED VOLUME, HORIZONTAL INJECTION)

YY 0469-2011 MEDICAL SURGICAL MASK TECHNOLOGY REQUIRES A BLOOD PENETRATION TEST DEVICE

ISO 22609:2004 INFECTIOUS PATHOGEN PROTECTION EQUIPMENT MEDICAL MASK TEST METHOD FOR RESISTANCE TO SYNTHETIC BLOOD PENETRATION (FIXED VOLUME, HORIZONTAL INJECTION)

ASTM F1862-07 STANDARD TEST METHOD FOR RESISTANCE OF MEDICAL FACE MASKS TO BLOT BY SYNTHETIC BLOOD (HORIZONTAL PROJECTION OF FIXED VOLUME AT A KNOW VELOCITY)

TECHNICAL PARAMETERS:

1. INJECTION DISTANCE: 300mm ~ 305mm ADJUSTABLE

2. NOZZLE DIAMETER: 0.84mm

3. INJECTION SPEED: 450CM/S, 550CM/S, 635CM/S

4. WEIGHT: 35KG

5. POWER SOURCE: AC220V 50HZ

QUANTITY: 1

T-2898 PP STAPLE FIBER PLANT, 6000 MTA, BRAND MOSTLY FLEISSNER , AUTEFA BALE PRESS
20 TONS PER DAY

PP STAPLE FIBER SYSTEM
6000 MTA (LINE-1+LINE-2)
EXTRUTION & SPINNING PACKAGE

REFERENCE NUMBER: R-7764

SULZER TEXTIL P7300HP S540 N4 SP D12 R

YEAR: 2007

QUANTITY: 1

REFERENCE NUMBER: M-1083

ROSIQUE MODEL AP 2082 CARDING MACHINES YEAR 1993

CARDING MACHINES

ROSIQUE

MODEL AP 2082

YEAR 1993

AUTOLEVELLER USTER

EXIT CAN 14” x 42”

CHUTE FEED ROSIQUE FROM NEU PROJECT

MACHINE WITH 8 TOP ROLLS (4 WORKER ROLLS AND 4 STRIPPING ROLLS)

REVOLVING FLAT WHIT 106 FLATS

380 VOLTS

50 HZ

QUANTITY: 7