Search results for: 'Spinning mach'
- Related search terms
- machine'
- Machine+f'
- Machine+op
- MACHINE+S
- Machine fe
- C-3575 RIETER RING SPINNING PLANT WITH 24000 SPINDLES, YEAR 2003, WITH RIETER G-33 SPINNING MACHINES
C-3575 RIETER RING SPINNING PLANT WITH 24000 SPINDLES, YEAR 2003, WITH RIETER G-33 SPINNING MACHINES
RIETER RING SPINNING PLANT
WITH RIETER G-33 SPINNING MACHINES
24000 SPINDLES
YEAR: 2003QUANTITY: 1
Learn More - G-0784 RIETER FDY EXTRUSION EQUIPMENT FOR POLYPROPYLENE YEAR 1996/98
REFERENCE NUMBER: G-0784
RIETER FDY EXTRUSION EQUIPMENT FOR POLYPROPYLENE YEAR 1996/98
1. Machine m26/39:
Year 1996
For 1 fdy spinning line with 2+4 positions, each position with 4 ends
Product: fdy-yarn on bobbins
Raw material: pp, dried filament grade chips
Yarn count range: 150 – 400 dtex
Winder speed for target: 4000 m/min
Machine technical data:
Position gauge: 800 mm
Spinning pump capacity: 4x10 ccm/rev
Spinneret size diameter: 95 mm
Quench width: 670 mm
Quench length: 1700 mm
Number of spin-finish pumps per position: 1
Capacity of spin-finish pump: 4x0.05 ccm/rev
Number of winders/position: 1
Type of winder: riemat a6-094
Number of packages/winder: 4
Maximum package diameter: 420 mm
Package stroke: 190 mm
Package weight at 280 mm package diameter: approx. 6.2 kg
Detailed technical specifications:
Extruder for 4 positions Year 1998:
1 extruder type e1. 105-30m:
-nominal extruder capacity: max 275 kg/h for pp
-operational extruder capacity: max 248 kg/h for pp
-screw diameter: 105 mm
-l/d ratio: 30
-barrel with:
electrical ceramic heaters
7 heating zones, each zone equipped with one 2xpt100
heating zone capacity approx. 58 kw
inlet zone, water cooled
nozzle for nitrogen purge
insulation
-screw with torpedo mixing head
-reduction gear, including belt transmission to motor
-dc motor, rated power approx. 95kw
-extruder frame
1 extruder measuring head, dowtherm vapour heated
-measuring head comprising:
coarse filter
insulation
-double pt100, one each for melt and dowtherm vapour temperature
-pressure sensors for melt pressure, one in front and one behind the coarse filter
1 melt distribution system, dowtherm vapour heated
-melt distribution system comprising
main product pipe between extruder, measuring head and melt distributor.
Extruder for 2 positions Year 1998:
1 extruder type e1. 60-30
-nominal extruder capacity: max 275 kg/h for pp
-operational extruder capacity: max 248 kg/h for pp
-screw diameter: 60 mm
-l/d ratio: 30
-barrel with
electrical ceramic heaters
6 heating zones, each zone equipped with one 2xpt100
heating zone capacity approx. 17 kw
inlet zone, water cooled
insulation
-screw nitrited with maddock mixing head
-reduction gear, including belt transmission to motor
-dc motor, rated power approx. 22kw
-extruder frame
1 extruder measuring head, electrically heated year 1998
-measuring head comprising:
insulation
Double pt100, one each for melt and dowtherm vapour temperature
pressure sensors for melt pressure
burst disc for power switch-off at overpressure.
1 melt distribution system, dowtherm vapour heated
-melt distribution system comprising
main product pipe between extruder, measuring head and melt distributor.
1 riebeam bottom loading spinning beam year 1998
-beam comprising:
welded-in pump blocks with bolted pump adapter plate
silumin insulation blocks
melt distribution pipes with polished inner surfaces
efficient vapour heating on all sides of spin pumps
optimized heat condustion to the spinnerets
1 freezing valve upstream of each spinpump
2 pressure sensors for measuring the melt pressure in front and behind the spinpump
(2 per line)
heating box, completely insulated
heating by dowtherm vapour
1 double pt100 for measuring and controlling the heating box temperature
Designed as follows:
-bottom loading of rieter quickfit spinpacks
-design temperature 320°c
-maximum allowable working pressure: 300 bar for melt pipe and 2.57 bar for jacket
Dowtherm evaporator and components for heating system:
-electrically heated, total capacity approx 25 kw
-shut-off valves
-drainage valves
-dry protection sensor
-magnetic controlled level gauge
- vent system on top of measuring head.
Poy spin packs, type rieter quickfit:
-max pressure in the spinpack: 350 bar
-design temperature: 320 °c
-spinneret outside dimensions: 95 mm
-bottom loading design
-bayonet locking, insert and tighten by turning 90°
-self sealing system
-sand or metal powder filtration, 3 cm filling depth
-wire mesh filters
Spin pumps with motors and gears:
Gear pumps, 4-fold
Capacity 4 x 6 ccm/rev
Each spin pump system comprising
Individual drive motor with flange connection to the reduction gear
Hollow gear shaft for installation of spin pump shaft
Shaft with shear pin protection
Reduction ratio 1:80
Pump speed: 8-30 rev/min
Motor type: synchronous ac-motor
Rated power: 500w at 50 cps
Quench air cabinets bsk 670/1700:
Each cabinet comprising:
-rigid cabinet made from welded sheet metal, painted, side walls made from alu sheet metal
-air rectifier consisting of different layers of perforated metal sheets, rectifiers removable to the front for cleaning.
-1 perforated hinged door
-air inlet duct flanged with counter flange, comprising air flow regulating flaps
-interfloor filament duct, length 2000 mm
-alu chutes for start-up
-nozzles for connection of differential pressure gauge.
Spinning vapour exhausts:
-exhaust hood per spinning position for removal of spinning vapour
-hood designed as follows:
made from stainless steel
air flow regulation flap
hood removable for cleaning
Take-up frames, type riedraw 1:
Welded steel frame, housing all drawrolls, compressed air supply pipes for the aspirator units and the yarn waste pipes within the fdy take-up unit.
Per position:
4 inlet yarn guides
4 spin finish application nozzles
1 yarn cutter / aspirator unit
1 spin finish pump
4 centring yarn guides
4 intermingling units
rolls as described further
1 automatic winder riemat a6-094
Drawrolls year 1998:
Mono 1 with 1 rievap 32 dual shell drawroll, type j7/32-40, ot40
Speed range: 750 to 4000 mpm
Roll diameter: 190 mm
Working width: 250 mm
Temperature range: 45-250°c
And 1 bearing separator roll, type srd60 hard chromium plated
Duo 1 with 2 rievap 32 dual shell drawroll, type j7/32-60, ot40
Speedrange: 1000 to 6000 mpm
Roll diameter: 190 mm
Working width: 250 mm
Temperature range: 45-250°c
Duo 2 with 2 rievap 32 dual shell drawroll, type j7/32-60, ot40
Speedrange: 1000 to 6000 mpm
Roll diameter: 190 mm
Working width: 250 mm
Temperature range: 45-250°c
Duo 3 with 2 cold draw roll units each type j7/45-55
Speedrange: 1800 to 5500 mpm
Roll diameter: 150 mm
Working width: 180 mm
Automatic and wasteless winder riemat a6-094
Spindle driven
Number of ends per winder: 4 ends
Yarn count range: 15 to 1000 dtex
Take up speed: 2500 to 5500 m/min
Chuck length: 900 mm
190 mm stroke, 420 mm outside package diameter
Package volume: 24.7 dm³
Tube bore: 94 ±0.2 mm
Tube outside diameter: 106 ±0.4 mm
Tube length: 225 ±0.5 mm
Oil-mist lubrication unit:
Compressed air distribution station
Mobile aspirator guns with hoses
Electrical control equipment
-for electrical power
general: 3 x 380v/50hz plus ground wire
euro-standard: 3x400v 50 or 60hz plus ground wire
maximum voltage variation ±10% measured at terminals of cabinets
maximum frequency variation: ±2%
Process control system (cif):
fully integrated control system to control and monitor the entire spinning line.
the central monitoring unit si linked to the plc of the spinning section and the plcs of each spinning position.
Drive and heater control year 1998:
Spinning section:
Speed adjustment for the extruder motor is done via a dc-convertor
To achieve a constant pressure at the extruder outlet, the output of the pressure controller is transmitted to the dc-converter to adjust the extruder speed.
The feedback of the actual extruder speed is done by a tacho generator mounted on the extruder motor.
One common frequency inverter supplies the synchronous ac motors for the spin pumps.
According to process conditions, the plc transmits the setpoint to the inverter.
All motors are equipped with an overload protection.
Solid state relays heat each extruder zone and spinning beam.
Each extruder zone and the spinning beam represent an independent control loop.
Take-up section:
The inverter unit is a processor-controlled static frequency inverter for powering the 3-phase motors.
All inverter units in a position cabinet are supplied with approx 570v dc from a common rectifier.
Heating system:
The heating unit rhu is processor-controlled.
The power supply is taken straight from 3-phase 380/400v which powers the cabinet.
The inductor is fitted inside the draw roll.
The rhu switches the current on and off in this inductor. While current flows, a voltage is inducted into the
Rotating draw roll.
This sets up a short-circuit current in the draw roll, thereby heating the roll unit.
2. Machines m27/ 28 / 30 year 1998:
For 3 fdy spinning lines each with 2 positions, and each position with 4 ends
Product: fdy-yarn on bobbins
Raw material: pp, dried filament grade chips
Yarn count range: 150 – 400 dtex
Winder speed for target: 4000 m/min
Machine technical data:
Position gauge: 1000 mm
Spinning pump capacity: 4x7.5 ccm/rev
Spinneret size diameter: 95 mm
Quench width: 470 mm
Quench length: 1200 mm
Number of spin-finish pumps per position: 2
Capacity of spin-finish pump: 4x0.16 ccm/rev + 4x0,05 ccm/rev
Number of winders/position: 1
Type of winder: riemat a6-094
Number of packages/winder: 4
Maximum package diameter: 420 mm
Package stroke: 190 mm
Package weight at 280 mm package diameter: approx. 6.2 kg
Detailed technical specifications:
1 extruder type e1. 60-30m
-nominal extruder capacity: max 80 kg/h for pp
-screw diameter: 65 mm
-l/d ratio: 30
-barrel with:
electrical ceramic heaters
7 heating zones, each zone equipped with one 2xpt100
heating zone capacity approx. 22 kw
inlet zone, water cooled
nozzle for nitrogen purge
insulation
-screw with torpedo mixing head
-reduction gear, including belt transmission to motor
-dc motor, rated power approx. 22kw
-extruder frame
1 extruder measuring head, electrically heated:
-measuring head comprising:
coarse filter
insulation
-double pt100, one each for melt and dowtherm vapour temperature
-pressure sensors for melt pressure, one in front and one behind the coarse filter
1 melt distribution system, dowtherm vapour heated:
Melt distribution system comprising:
main product pipe between extruder, measuring head and melt distributor.
1 riebeam bottom loading spinning beam:
-beam comprising:
welded-in pump blocks with bolted pump adapter plate
silumin insulation blocks
melt distribution pipes with polished inner surfaces
efficient vapour heating on all sides of spin pumps
optimized heat condustion to the spinnerets
1 freezing valve upstream of each spinpump
2 pressure sensors for measuring the melt pressure in front and behind the spinpump
(2 per line)
heating box, completely insulated
heating by dowtherm vapour
1 double pt100 for measuring and controlling the heating box temperature
Designed as follows:
-bottom loading of rieter quickfit spinpacks
-design temperature 320°c
-maximum allowable working pressure: 300 bar for melt pipe and 2.57 bar for jacket
Dowtherm evaporator and components for heating system:
-electrically heated, total capacity approx 18 kw
-shut-off valves
-drainage valves
-dry protection sensor
-magnetic controlled
-level gauge
-vent system on top of measuring head.
Poy spin packs, type rieter quickfit:
Max pressure in the spinpack: 350 bar
Design temperature: 320 °c
Spinneret outside dimensions: 95 mm
Bottom loading design
Bayonet locking, insert and tighten by turning 90°
Self sealing system
Sand or metal powder filtration, 3 cm filling depth
Wire mesh filters
Spin pumps with motors and gears:
Gear pumps, 4-fold
Capacity 4 x 7.5 ccm/rev
Each spin pump system comprising
individual drive motor with flange connection to the reduction gear
hollow gear shaft for installation of spin pump shaft
shaft with shear pin protection
reduction ratio: 1:80
pump speed: 8-30 rev/min
motor type: synchronous ac-motor
rated power: 500w at 50 cps
Quench air cabinets bsk 470/1200
Each cabinet comprising:
-rigid cabinet made from welded sheet metal, painted, side walls made from alu sheet metal
-air rectifier consisting of different layers of perforated metal sheets, rectifiers removable to the front for cleaning.
-1 perforated hinged door
-air inlet duct flanged with counter flange, comprising air flow regulating flaps
-interfloor filament duct, length 2000 mm
-alu chutes for start-up
-nozzles for connection of differential pressure gauge.
Spinning vapour exhausts:
-exhaust hood per spinning position for removal of spinning vapour
-hood designed as follows:
made from stainless steel
air flow regulation flap
hood removable for cleaning
Take-up frames, type riedraw 1:
Welded steel frame, housing all drawrolls, compressed air supply pipes for the aspirator units and the yarn waste pipes within the fdy take-up unit.
Per position:
4 inlet yarn guides
2 spin finish application nozzles per end
1 yarn cutter / aspirator unit
2 spin finish pump
4 centring yarn guides
4 pre-intermingling jets
4 intermingling units
1 additional operator panel between duo1 and duo 2.
rolls as described further
1 automatic winder riemat a6-094
Drawrolls:
Mono 1 with 1 rievap 32 dual shell drawroll, type j7/32-40, ot40
Speedrange: 750 to 4000 mpm
Roll diameter: 190 mm
Working width: 250 mm
Temperature range: 45-250°c
And 1 bearing separator roll, type srd60
Hard chromium plated
Duo 1 with 2 rievap 32 dual shell drawroll, type j7/32-60, ot40
Speedrange: 1000 to 6000 mpm
Roll diameter: 190 mm
Working width: 250 mm
Temperature range: 45-250°c
Duo 2 with 2 rievap 32 dual shell drawroll, type j7/32-60, ot40
Speedrange: 1000 to 6000 mpm
Roll diameter: 190 mm
Working width: 250 mm
Temperature range: 45-250°c
Duo 3 with 2 cold draw roll units each type j7/45-55
Speedrange: 1800 to 5500 mpm
Roll diameter: 150 mm
Working width: 180 mm
Automatic and wasteless winder riemat a6-094:
Spindle driven
Number of ends per winder: 4 ends
Yarn count range: 15 to 1000 dtex
Take up speed: 2500 to 5500 m/min
Chuck length: 900 mm
190 mm stroke, 420 mm outside package diameter
Package volume: 24.7 dm³
Tube bore: 94 ± 0.2 mm
Tube outside diameter: 106 ± 0.4 mm
Tube length: 225 ± 0.5 mm
Compressed air distribution station:
Mobile aspirator guns with hoses
Electrical control equipment
For electrical power
general : 3 x 380v/50hz plus ground wire
Euro-standard: 3x400v 50 or 60hz plus ground wire
Maximum voltage variation ±10% measured at terminals of cabinets
maximum frequency variation: ±2%
Process control system (cif):
Fully integrated control system to control and monitor the entire spinning line.
The central monitoring unit si linked to the plc of the spinning section and the plcs of each spinning position.
Drive and heater control:
Spinning section.
Speed adjustment for the extruder motor is done via a dc-convertor.
To achieve a constant pressure at the extruder outlet, the output of the pressure controller is transmitted to the dc-converter to adjust the extruder speed.
The feedback of the actual extruder speed is done by a tacho generator mounted on the extruder motor.
One common frequency inverter supplies the synchronous ac motors for the spin pumps.
According to process conditions, the plc transmits the setpoint to the inverter.
All motors are equipped with an overload protection.
Solid state relays heat each extruder zone and spinning beam.
Each extruder zone and the spinning beam represent an independent control loop.
Take-up section:
The inverter unit is a processor-controlled static frequency inverter for powering the 3-phase motors.
All inverter units in a position cabinet are supplied with approx 570v dc from a common rectifier.
Heating system:
The heating unit rhu is processor-controlled.
The power supply is taken straight from 3-phase 380/400v which powers the cabinet.
The inductor is fitted inside the draw roll.
The rhu switches the current on and off in this inductor.
While current flows, a voltage is inducted into the rotating draw roll.
This sets up a short-circuit current in the draw roll, thereby heating the roll unit.
HOURLY PRODUCTION:
FOR 150 DENIER @ 3500 MPM WINDER SPEED, THE HOURLY PRODUCTION IS 3.5 KG/BOBBIN.
AS THERE IS 4 ENDS PER POSITION, THIS MEANS 14 KG/HOUR/POSITION
M26/39 ARE OF 2 + 4 POSITIONS; HENCE M26 = 28 KG/HOUR AND M39 = 56 KG/HOUR
M27/28/30 ARE OF 2 POSITIONS EACH, HENCE 28 KG/HOUR EACH.
(AS PER OUR PEOPLE AT THE EXTRUSION PLANT, THEY WERE RUNNING TRIALS TO PRODUCE THE 150 DENIER @ 4000 MPM WINDER SPEED)
FOR 300 DENIER @ 3600 MPM WINDER SPEED, THE HOURLY PRODUCTION IS 7.2 KG/BOBBIN.
AS THERE IS 4 ENDS PER POSITION, THIS MEANS 28.8 KG/HOUR/POSITION
M26/39 ARE OF 2 + 4 POSITIONS; HENCE M26 = 57.6 KG/HOUR AND M39 = 115.2 KG/HOUR
M27/28/30 ARE OF 2 POSITIONS EACH, HENCE 57.6 KG/HOUR EACH.
FOR 600 DENIER @ 2200 MPM WINDER SPEED, (SPEED LIMITATION DUE TO EXTRUDER CAPACITY) THE HOURLY PRODUCTION IS 8.8 KG/BOBBIN.
AS THERE IS 4 ENDS PER POSITION, THIS MEANS 35.2 KG/HOUR/POSITION
M26/39 ARE OF 2 + 4 POSITIONS; HENCE M26 = 70.4 KG/HOUR AND M39 = 140.8 KG/HOUR
M27/28/30 ARE OF 2 POSITIONS EACH, HENCE 70.4 KG/HOUR EACH.
MACHINE HAS BEEN PARTIALLY DISASSEMBLED (EXTRUDERS AND SPINBEAMS HAVE BEEN TAKEN DOWN TO GROUNDFLOOR) REST OF THE EQUIPMENT STILL TO BE DISASSEMBLED
Learn More - M-3334 RIETER BT 905 OPEN END SPINNING MACHINE YEAR 1999-2000REFERENCE NUMBER: M-3334 (880AESDXX7) K RIETER BT 905 OPEN END SPINNING MACHINE YEAR 1999-2000 RIETER BT 905 OPEN END SPINNING MACHINE YEAR: 1999, 2000 NO. OF POINTS - 288 CYLINDRICAL BEAM - 170 mm WEIGHT OF BEAM - MAX - 3 KG DIAMETER - 43 OR 50 mm TYPE OF COMB - OK 61 NIDI ROTATION OF COMB - 7000-9000 RPM PRODUCED YARN: VIS, VIS/PES, TEX 20 - 80 ROTATION OF SPIN 45-90 000 RPM ELECTRICAL QUALITY CONTROL AVAILABLE WAXING (PARAFFINING) UNIT (1 MACHINE) SUPPLY - 3 X 380 V, 50 HZ, 195 A, 10 BAR QUANTITY AVAILABLE: 2 Learn More
- M-5529 MURATA 802-HR AIR JET SPINNING MACHINES WITH 72 SPINDLES EACHREFERENCE NUMBER: M-5529 (44035KMR3UX) L MURATA 802-HR AIR JET SPINNING MACHINES WITH 72 SPINDLES EACH AIR JET SPINNING MACHINES FOR SALE MAKE: MURATA MODEL: 802 HR 72 SPINDLES EACH IN EXCELLENT CONDITION QUANTITY AVAILABLE: 4 Learn More
- M-5248 POLYPROPYLENE YARN FILAMENT SPINNING MACHINES – FOR HIGH TENACITY - BARMAGREFERENCE NUMBER: M-5248 (1313WYGGXX12) L POLYPROPYLENE YARN FILAMENT SPINNING MACHINES – FOR HIGH TENACITY - BARMAG SPINNING PLANT N. 02 BRAND SML MASCHINENGESELLSCHAFT MBH HIGH TENACITY YARN N. 08 BOBBINS WINDING BARMAG AUTOMATIC N. 02 BOBBINS 290mm COLORTRONIC TITLE FROM 600 TO 3000 BRAND NEUMAG N. 03 EXTRUDERS N. 02 POY (N. 02 WINDING 8 YARN 1 EXTRUDER - N. 01 WINDING 6 YARN 2 EXTRUDER) N. 01 FDY (N. 01 WINDING 6 YARN) MASTER COLOR TWISTING MACHINE BRAND GIUDICI DUPLEX 200 N. 02 MACHINES TRAVERSE ELECTRONIC - N. 72 POSITIONS - BOBBIN 290mm - YEAR 1998 TITLE FROM 800 TO 2000 D.TEX BRAND GIUDICI DUPLEX 200 N. 02 MACHINES - N. 72 POSITIONS - BOBBIN 290 mm - YEAR 1995 TITLE FROM 300 TO 1500 D.TEX BRAND ICBT N. 01 MACHINE - N. 72 POSITIONS - BOBBIN 290 mm - YEAR 1986 TITLE FROM 1000 TO 3000 D.TEX BRAND RATTI N. 04 MACHINES - N. 72 POSITIONS - BOBBIN 290mm - YEAR 1984 TITLE TO 800 TO 3000 D.TEX BRAND RPR N. 02 MACHINES - N. 72 POSITIONS - BOBBIN 230 - 290 mm YEAR 1982 TITLE TO 300 FROM 1000 D.TEX TEXTURIZING MACHINES BRAND SSM TYPE DP3 FT BOBBIN 230mm - AUTODOFFING - N. 40 POSITIONS - YEAR 2005 - INDEPENDENT POSITIONS DOUBLE FUSED TEMCO - HEBERLEIN JET P 212 - FOURNACE MT 1.20 - CREEL WITH RESERVE BRAND GIUDICI TYPE TG 30 5 - SA YEAR 2001 N. 60 POSITIONS (N. 24 DIVIDED N. 36 OTHER PRODUCTION) N. 01 FOURNACE - AUTODOFFING - FUSED TEMCO - HEBERLEIN JET - BOBBIN 230mm BRAND SSM TYPE RM3 TASLAN YEAR 2003 N. 12 POSITIONS - CREEL WITH RESERVE - HEBERLEIN JET - AUTODOFFING - BOBBIN 290mm MACHINES ARE RUNNING DELIVERY IMMEDIATELY QUANTITY AVAILABLE: 1 Learn More
- M-3329 RIETER R 20 OPEN END SPINNING MACHINE YEAR 2002REFERENCE NUMBER: M-3329 (880HGUYXX7) K RIETER R 20 OPEN END SPINNING MACHINE YEAR 2002 RIETER R 20 OPEN END SPINNING MACHINE YEAR: 2002 QUANTITY AVAILABLE: 1 Learn More
- M-5104 ZINSER 420-SL SPINNING MACHINE YEAR 1998 LINKED TO SCHLAFHORST WINDER YEAR 1994REFERENCE NUMBER: M-5104 (1212TMTGXX11) L ZINSER 420-SL SPINNING MACHINE YEAR 1998 LINKED TO SCHLAFHORST WINDER YEAR 1994 (1) X SPINNING MACHINE ZINSER MODEL 420 SL YEAR 1988 – 620 SPINDLES RING DIAMETER 48mm GAUGE 82.5mm TUBE LENGTH 260mm SPINDLE HEIGHT 210mm ELECTROJET TRAVELLING BLOWER LINKED TO: (1) X WINDER SCHLAFHORST MODEL 238 SYSTEM D YEAR 1994 – 20 POSITIONS DELIVERY 6” CONICITY 4°20 CYLINDER 2 TURNS CLEARERS LOEPFE YARN MASTER AWE 700 TK 740 AC KNOTTERS THERMO SPLICER WAXER ELECTROJET TRAVELLING BLOWER QUANTITY: 2 Learn More
- R-1732 MURATA VORTEX AIR JET SPINNING MACHINE WITH 80 SPINDLES, YEAR 2007
R-1732 MURATA VORTEX AIR JET SPINNING MACHINE WITH 80 SPINDLES, YEAR 2007
MURATA VORTEX AIR JET SPINNING MACHINE
YEAR: 2007
MODEL: MVS. 861
80 SPINDLES PER MACHINE
6 INCH TUBE TAKE UP
3 MURATEC SPLICERS PER FRAME
1 MURATEC AUTOMATIC DOFFERS
WITH FRONT YARN CONVEYORS
MURATEC “VOS II” YARN MANAGEMENT SYSTEM WAXING DEVICES SPINDLE INSTALLED: 1.3
(SPARE DIAMETER 1,1 & 1,2)
NEEDLE HOLDER: 2PZ8.8L8
NOZZLE: 4-HOLES ECO (Z)1
4 LINE SLIVER CREELS FOR 20 INCH DIAMETER CANSQUANTITY: 3
Learn More - C-5160 RIETER OPEN END SPINNING MACHINES R40, YEAR 2006
C-5160 RIETER OPEN END SPINNING MACHINES R40, YEAR 2006
RIETER OPEN END SPINNING MACHINES R40
Learn More
3 MACHINES WITH 300 ROTORS
1 MACHINE WITH 280 ROTORS
YEAR: 2006
TYPE OF ROTORS: 33 XT5-BD
COMBER CYLINDER: B 174 DN
NOZZLE: BRÖLL SPIRIT R
YARN CLEANER: USTER QUANTUM 2
TUBES: CYLINDRICAL
2 MACHINES RUNNING
2 MACHINES DISMANTLED
RAW MATERIAL: 100% VISCOSE FIBRES (38MM, 1, 3 DTEX)
PRODUCTION YARN: NM 40/1 – NM 60/1
FOR COARSE YARN ROTORS AND NOZZLES MUST BE CHANGED (NONE FOR SALE)
QUANTITY: 4 - L-5506 ZINSER LINKED RING SPINNING MACHINES MODEL 320, YEAR 1989 TO 1990
REFERENCE NUMBER: L-5506
ZINSER LINKED RING SPINNING MACHINES MODEL 320, YEAR 1989 TO 1990
YEAR: 1989 TO 1990
MODEL: 320
1196 SPINDLES
RING DIAMETER: 42mm
FLANGE 1
GAUGE: 75mm
TUBE LENGTH: 220mm
QUANTITY: 18
Learn More