Search results for: 'blower va'

EFFECTIVE WIDTH: 1600mm
DAILY OUTPUT: 10,000 KGS PER DAY
WEIGHT RANGE: 10 TO 150 GSM
FILAMENT DIAMETER: 1.6 TO 2.0 DENIER
SPEED: 350 TO 400 METERS PER MINUTE
RAW MATERIAL: POLYPROPYLENE (PP)
DIMENSIONS: 35,000 X 15,000 X 11,000mm
VOLTAGE: 380 VOLTS, 3 PHASE

CONSISTING OF:

SPUNBOND EQUIPMENT

PP VACUUM SUCTION MACHINE (2)
7800 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS PER HOUR
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
ACCURACY: 0.01%

EXTRUDER (2)
DIAMETER: 130mm
SINGLE SCREW (2)
HEATING SYSTEM: ELECTRICITY
MOTOR: 75 KW

MELT FILTRATION MACHINE (2)
PIPE SIZE: 50mm
FILTER AREA: 3.5 SQUARE METERS
MELT FLOW: 650 KGS PER HOUR
DOUBLE FILTRATION CHAMBER

MELTING PUMP (2)
40 RPM
FLOW CAPACITY: 400 KGS PER HOUR
POWER: 7.5 KW

SPINNING BEAM (2)
DIMENSIONS: 1900 X 256mm
HANGER TYPE MELT DISTRIBUTION
HEATING SYSTEM: OIL
WORKING TEMPERATURE: 200 TO 260 CELSIUS

SPINNERET (4)
HARDNESS: 30
SIZE: 1900mm LONG X 256mm WIDE
HOLE DIAMETER 0.45mm
HOLE QUANTITY: 6500 HOLE PER METER

QUENCHING UNIT (2)
WORKING TEMP: 20 CELSIUS
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
AIR PRESSURE: 6500
FILTER SIZE: 80#

FILAMENT DRAFT UNITS (2)
AIR PRESSURE: 5020PA
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
INSIDE TEMP: 10 TO 25 CELSIUS
FILAMENT FINENESS: 1.6 TO 2.0 DENIER

MELT BLOWN EQUIPMENT

VACUUM SUCTION MACHINE (2)
LOAD CAPACITY: 700 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS/H
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
4 HOPPERS
200 KGS HOPPER LOAD

EXTRUDER
DIAMETER: 105mm
SINGLE SCREW
MOTOR: 18.5 KW

MELT FILTER
DOUBLE CYLINDER
HYDRAULIC
MELT FLOW CAPACITY: 450 KGS/HR
FILTER SIZE: 150mm DIAMETER
ELECTRIC HEATING

MELTING PUMP
SPEED: 40 RPM
MELT FLOW CAPACITY: 450 KGS PER HOUR
POWER: 7.5 KW

MELT BLOWN DIE SPINNARET
SPINNERET HOLE SIZE: 0.32 TO 0.35mm
HOLE DISTANCE: 40 TO 42 PER INCH
FABRIC WEIGHT: 2 TO 200 GSM

HIGH PRESSURE AIR BLOWER
AIR FLOW CAPACITY: 70 TO 100 CUBIC METERS PER MINUTE
AIR PRESSURE: 100 KPA
POWER: 200 KW

WEB FORMING MACHINE
SPEED: 100 METERS PER MINUTE

ELECTRIC TREATMENT
VOLTAGE: 220 VOLTS, 50 Hz
INPUT CURRENT: 3A
OUTPUT VOLTAGE: 60 KV
TREAT WEB WIDTH: 1.6 METERS

HOT AIR HEATING MACHINE
WORKING TEMP: 350 CELSIUS
PRESSURE: 0.8 KPA
HEATING: ELECTRIC
POWER: 200 KW

THERMAL CALENDER
PROCESSING SPEED: 400 METERS PER MINUTE
ROLLER SIZE: 2000mm LONG, 520mm DIAMETER
EMBOSSING ROLLER: 1
LINEAR PRESSURE: 30 TO 125 N/mm
HEATING SYSTEM: OIL

HYDROPHILIC MACHINE
SPEED: 400 METERS PER MINUTE
FEEDING SYSTEM: DOUBLE KISSING ROLLER
KISS ROLLER DIAMETER: 215mm
LIQUID TANK: 200 KGS WITH HEAT/WARM AND MIX

DRYING SYSTEM:
INFRARED + HOT AIR
DRIVE ROLL SIZE: 150mm
HEATING EQUIPMENT: QUARTZ HEATER, HOT AIR BLOWER, EXHAUST AIR BLOWER

INSPECTION MACHINE
EFFECTIVE WIDTH: 1600mm
INSPECTION SPEED: 400 METERS PER MINUTE
INSPECT GSM: 10 TO 40 GSM

AUTOMATIC WINDING MACHINE
SPEED: 400 METERS PER MINUTE
ROLLER DIAMETER: 2000mm
ROLLER EXCHANGE SYSTEM: AUTOMATIC
FABRIC INSPECTOR: ONLINE
POWER: 15 KW

HIGH SPEED SLITTING MACHINE
PROCESS SPEED: 800 METERS PER MIN
ROLL DIAMETER: MAX 1500mm
SLITTING WIDTH: 80mm
PAPER TUBE SIZE: 76mm DIAMETER
AUTO TENSILE CONTROL: AVAILABLE ONLINE
METER COUNTING: AVAILABLE ONLINE

OIL HEATER (4)
HEATING POWER: 60 KW
MOTOR POWER: 7.5 KW
OIL PUMP FLOW: 30 CUBIC METERS PER SECOND
PRESSURE: 0.4 KPA

WATER CHILLER
DRIVE SYSTEM: SCREW
COOLING CAPACITY: 300,000 CALORIES
TEMP: 0 TO 20 CELSIUS
POWER: 110 KW

AIR BLOWER
SPEED: 1450 RPM
AIR BLOW CAPACITY: 12,000 CUBIC METERS PER HOUR
PRESSURE: 5200 PA
POWER: 30 KW x 3, 45 KW x 1

AIR COMPRESSOR
DRIVE SYSTEM: SCREW
PRESSURE: 0.8 KPA
POWER: 15 KW

HEATING SYSTEM: ELECTRIC
TEMP: 350 CELSIUS
HEATING TIME: 6 TO 8 HOURS
POWER: 4 KW

ULTRASONIC CLEANING MACHINE
3mm THICK
SIZE: 2000 X 500mm
FREQUENCY VIBRATION: 100 KHZ
TEMP: 40 CELSIUS

ELECTRONIC PANEL BOARD

PLATFORM

Learn More

REFERENCE NUMBER: L-6069

EASTMAN STATIC TABLE CUTTING MACHINE MODEL M9000, 20’ X 72’, YEAR 2009

 

STATIC TABLE CUTTING MACHINE

MAKE: EASTMAN

MODEL: M9000

20 FEET LONG X 72 FEET WIDE

PURCHASED IN YEAR 2009

220 VOLT, 1 PHASE

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: L-5092

EREMA RGA 160 TVE EXTRUDER, 6.3” SCREW (160mm), YEAR 2003

 

QUANTITY: 1

Learn More

C-3995 MUNCH PELLET MILL SYSTEM, YEAR 2012

MUNCH PELLET MILL SYSTEM
CONSISTING OF:
OFFER 001
VECOPLAN INCLINED FEED CONVEYOR
APPROXIMATELY 60″ WIDE X 26′ LONG

QUANTITY: 1

OFFER 002
ENSIGN DOSING HOPPER
APPROXIMATELY 84″ WIDE X 108″ LONG X 84″ DEEP

QUANTITY: 1

OFFER 003
VECOPLAN INCLINED CONVEYOR TYPE KKF-820-2K-U
APPROXIMATELY 32″ WIDE X 84″ LONG BOTTOM HORIZONTAL SECTION X 30′ LONG INCLINED SECTION

QUANTITY: 1

OFFER 004
ROTARY DRUM MAGNET

QUANTITY: 1

OFFER 005
MUNCH DENSIFIER
APPROXIMATELY 60″ DIAMETER X 60″ DEEP

QUANTITY: 1

OFFER 006
MUNCH RING DIE PELLET MILL
MODEL: RMP660/178
YEAR: 2012

QUANTITY: 1

OFFER 007
FACE ROLLERS
APPROXIMATELY 12-1/2″ DIAMETER X 7-1/8″ FACE ROLLERS

QUANTITY: 2

OFFER 008
VECOPLAN INCLINED CONVEYOR
TYPE: VFB-800-F2
APPROXIMATELY 32″ WIDE X 72″ LONG BOTTOM HORIZONTAL SECTION X 30′ LONG INCLINED SECTION

QUANTITY: 1

OFFER 009
MUNCH PELLET COOLER
MODEL: SDCC10

QUANTITY: 1

OFFER 010
VECOPLAN INCLINED CONVEYOR
TYPE: VFB-800-F2
APPROXIMATELY 32″ WIDE X 120″ LONG BOTTOM HORIZONTAL SECTION X 10′ LONG INCLUDED SECTION

QUANTITY: 1

Learn More

C-3983 HACOS VAN MEULENBEKE ROBY 450 ENROBER FOR CHOCOLATE, WIDTH 1mm, YEAR 2007

HACOS VAN MEULENBEKE ROBY 450 ENROBER
YEAR: 2007
FOR CHOCOLATE
NO TEMPERER OR COOLING TUNNEL
MANUFACTURER: HACOS VAN MEULENBEKE
MODEL: ROBY 450
LENGTH: 0.04 IN (1mm)
WIDTH: 0.04 IN (1mm)
HEIGHT: 0.04 IN (1mm)

QUANTITY: 1

Learn More

C-3969 SAVIO POLAR L AUTOMATIC CONE WINDER WITH 60 HEADS, PITCH 152mm, YEAR 2012

SAVIO POLAR L AUTOMATIC CONE WINDER
60 HEADS
DX MAIN UNIT
MANUAL FEEDING BY SPOOLS
PITCH: 6" (152mm)
YEAR: 2012

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-1222 SAVIO AUTOMATIC CONE WINDER, MODEL ORION E, YEAR 2005, WITH WAXING DEVICE, N.44 POSITIONS – YEAR 2005 DETAILS: AUTOMATIC CONE WINDER SAVIO ORION E N.44 HEADS YEAR OF CONSTRUCTION 2005 AUTOMATIC LOADER OF THE SPOOLS AUTOMATIC TOP SEARCH MAIN UNIT SX LOADED DX DELIVERY 6"(152 mm) CONICITY 4°20' 2 TURNS DRUM DIAMETER 94 mm VARIABLE STEP SPLICER MESDAN MOD.690 U ELECTRONIC CLEARERS LOEPFE ZENIT FC WITH INTERCEPTING FOREIGN FIBERS WAXING DEVICE N.1 TROLLEY FOR AUTOMATIC DOFFING N.1 CONES RESERVE SINGLE BASKET LIGHTING ON THE MACHINE TROLLEY BLOWER MAGITEX WITH DRAIN ON THE MAIN UNIT QUANTITY AVAILABLE: 1 Learn More