Search results for: 'new'

C-4227 EREMA RM120TVE FILM/FIBER PELLETIZING LINE, EXTRUDER 120mm, YEAR 2000 - NEW

EREMA PELLETIZING LINE NEW
MODEL: RM120TVE FILM/FIBER
YEAR: 2000
LINE CONSISTS OF THE FOLLOWING:
EREMA MODEL RM120TVE
120mm EXTRUDER WITH 36/1 L/D DOUBLE VENTED BARREL
EXTRUDER IS DRIVEN BY A 160KW AC MOTOR WITH INVERTER
DOUBLE VENT INCLUDES A STAINLESS STEEL DEKER VACUUM PUMP
APPROXIMATELY 50 CUBIC FOOT STAINLESS STEEL CUTTER/COMPACTOR MOUNTED AT FEED SECTION
AND FED BY A 35″ WIDE X 20′ LONG INCLINED BELT CONVEYOR
CUTTER COMPACTOR DRIVEN BY A 105 KW
480 VOLT AC MOTOR

QUANTITY: 1 LINE

Learn More

C-4228 EREMA RM100TVE FILM/FIBER PELLETIZING LINE, EXTRUDER 100mm, YEAR 2000 - NEW

EREMA
MODEL: #RM100TVE FILM/FIBER PELLETIZING LINE NEW
YEAR: 2000
LINE CONSISTS OF THE FOLLOWING:
100mm (4″) EREMA
MODEL: #RM100TVE EXTRUDER
EXTRUDER IS DRIVEN BY A 132 KW AC MOTOR WITH INVERTER
EXTRUDER HAS ELECTRICALLY HEATED WATER COOLED BARREL
DUAL VENT
WITH EREMA STEEL VACUUM PUMP
TEMPERATURE CONTROL PANEL WITH EREMA SERIES 988 INSTRUMENTS (16 ZONE TOTAL)
AND EISENBLISS MODEL EG250 GEARBOX

QUANTITY: 1 LINE

Learn More

C-4003 CATERPILLAR 3516C HD, WIDTH 85, YEAR 2008 - NEW

CATERPILLAR 3516C HD
PRODUCT:
ENGINE BRAND: CATERPILLAR
ENGINE MODEL: 3516C HD
0 HOURS SINCE NEW
2682 HP @ 1600RPM
ENGINE RATING: MAXIMUM CONTINUOUS "C" RATING
YEAR: 11-SEP-2008
GOVERNOR: ELECTRONIC

DESCRIPTION:
AIR CLEANER: DRY TYPE
FLYWHEEL HOUSING SIZE: SAE 00
COOLING: HEAT EXCHANGED
ALTERNATOR: 24 VOLT ALTERNATOR
STARTER: 24 VOLT ELECTRIC STARTER
TIER RATING: 2
DIMENSIONS:
LENGTH: 150
WIDTH: 85
HEIGHT: 92
WEIGHT: 21000 POUNDS

QUANTITY: 1

Learn More

C-4002 CATERPILLAR 3516C HD, WIDTH 85, YEAR 2008 - NEW

CATERPILLAR 3516C HD
PRODUCT:
ENGINE BRAND: CATERPILLAR
ENGINE MODEL: 3516C HD
0 HOURS SINCE NEW
2682 HP @ 1600RPM
ENGINE RATING: MAXIMUM CONTINUOUS "C" RATING
YEAR: 10-SEP-2008

DESCRIPTION:
AIR CLEANER: DRY TYPE
FLYWHEEL HOUSING SIZE: SAE 00
COOLING: HEAT EXCHANGED
ALTERNATOR: 24 VOLT ALTERNATOR
DIMENSIONS:
LENGTH: 150
WIDTH: 85
HEIGHT: 92
WEIGHT: 21000 POUNDS

QUANTITY: 1

Learn More

C-3990 HYUNDAI HIMSEN 9H25/33 HFO POWER PLANT, CAPACITY 10.5 MW, YEAR 2014 - NEW

MAKE/MODEL: HYUNDAI HIMSEN 9H25/33
HFO POWER PLANT
CAPACITY: 10.5 MW
WATTAGE: 46,200 KW
YEAR: 2014
HOURS: NEW
FUEL TYPE: HFO
FREQUENCY: 50 HZ
ENCLOSURE: SOUND ATTENUATED ENCLOSURE
MANUFACTURER: HHI
ENGINE MODEL: HYUNDAI HIMSEN 9H25/33
GENERATOR MODEL: HYUNDAI
FOR 50HZ: 2100KW, 6000V, 750 RPM

QUANTITY: 5

Learn More

REFERENCE NUMBER: M-5238 (1313AJWNXX12U) L HFO POWER PLANTS (6MW EACH, TOTAL 24MW) YEAR 2008 – NEW (NEVER USED) HFO POWER PLANTS 6MW EACH TOTALLING 24MW YEAR 2008 WITH 50HZ NEW (NEVER USED) QUANTITY AVAILABLE: 4 Learn More

REFERENCE NUMBER: K-2221 DYEING AND FINISHING MACHINE FOR ELASTIC RIBBON AND LACES YEAR 2011-NEW MAKE: TONTUN-TAIWAN YEAR 2011 (1)TAPE INLET DEVICE (2) DYEING PADDER: ONE BIG AND ONE SMALL WITH MIXING TANK (1) 45 METERS STEAM CHAMBER (4) WASHING TANKS (1) FIXED STEAM CHAMBER (1)STARCHING AND FINISHING PADDER (2)STEAM DRYING CYLINDERS WITH TEFLON COATING (1)TAKE OFF DEVICE (1)ELECTRIC BOX MACHINE IS STILL NEW AND PACKED IN ITS ORIGINAL BOXES QUANTITY AVAILABLE: 1 Learn More

MAKE: JUKI
MODEL: LBH-1790A
COMPUTERIZED BUTTON-HOLE SEWING MACHINE

QUANTITY: 1

Learn More

MAKE: LAROCHE
MODEL: SUPER OLYMPIC
WIDTH: 1500mm
YEAR: MID 1980’S
6 CYLINDERS EACH LINE
CYLINDER DIAMETER: 1000mm
ALL CYLINDERS ARE DESIGNED FOR PINNED LAGS AND THERE IS LIFE LEFT IN MOST OF THE LAGS SETS.
LAGS: (1) 8mm x 135, (1) 10mm x 160, (1) 12 x 166, (3) 13mm x 174
EACH CYLINDER FED BY A FEED ROLL TO FEED DISH COMBINATION AND THE FIBER IS TRANSFERRED TO THE FOLLOWING CYLINDER VIA A CONDENSING SECTION.
MOTORS: 3 x 150 HP 575 VOLT
TOTAL REQUIRED POWER: 875 AMPS
NEW CONTROLS WITH ABB DRIVES
FEED CHUTES
LUMMUS BALERS
PINNED CYLINDERS
TEMAFA BLENDING BINS
EXIT CONVEYORS
EACH SECTION EQUIPPED WITH ANSUL DRY POWDER FIRE PROTECTION SYSTEM THAT IS ACTIVATED FROM EMBER DETECTED IN THE DUCT REMOVAL PIPING.
LINES INCLUDE ALL NECESSARY FANS, MAGNETS, DUCTING AND WIRING

IN PERFECT WORKING ORDER

QUANTITY: 2 LINES

Learn More

REFERENCE NUMBER: J-2184
HORIZONTAL CONVEYOR, 90 METERS LONG, 2400mm WIDE - NEW

MOTORIZED BELT-DRIVEN CONVEYOR
CONVEYING LENGTH: 90 METERS
CONVEYING WIDTH: 2400mm
CONVEYOR HEIGHT: 800mm
CONVEYING SPEED: 0 TO APPROXIMATELY 40 METERS PER MINUTE
BELTS: 200mm WIDTH x 6 PIECES, EACH 90 METERS LONG
DRIVING ROLL DIAMETER: 157mm
DRIVEN ROLL DIAMETER: 75mm
CENTER TO CENTER SPACING OF 2 ROLLS: 500mm
2 MOTORS, EACH 5.5 KW (CONVEYOR IS COMPOSED OF A TOTAL OF 4 SECTIONS. ONE 5.5 KW MOTOR DRIVES TWO SECTIONS)
1 INVERTER, 11 KW (DRIVES BOTH OF THE 5.5 KW MOTORS)
VOLTAGE: 220 VOLTS, 3-PHASE, 60 Hz

LEAD TIME: 45 WEEKDAYS FROM RECEIPT OF DEPOSIT

QUANTITY: 1

Learn More