Search results for: 'polyester'

REFERENCE NUMBER: R-4930 
ITEM 001 
TSUDAKOMA POLYESTER / SYNTHETIC YARN SIZING PLANT 
YEAR: 1992 
KSH500 TYPE 
WIDTH: 2200mm 
ITEM 002 
TSUDAKOMA AIR JET LOOMS DOBBY 
QUANTITY: 70 SETS 
ITEM 003 
PLANE LOOM 
QUANTITY: 100 SETS 
QUANTITY AVAILABLE: 1 SET COMPLETE SIZING PLANT 

Learn More

REFERENCE NUMBER: M-6705
SIZING MACHINE
MAKE: TSUDAKOMA
MODEL: KSH-500
YEAR: 1998
QUANTITY: 2

Learn More

REFERENCE NUMBER: M-4074

BARMAG SPINNING PLANT FOR POLYESTER YEAR 2000 – CAPACITY 20 TONS/DAY – 24 ENDS

 

BARMAG SPINNING FOR POLYESTER

INSTALLATION  YEAR 2000

MACHINE CAPACITY  20 TON DAY

NUMBER ENDS 24

EXTRUDER BARMAG

SPIN PUMPS BARMAG

FINISH PUMPS BARMAG

BOILER BARMAG

WINDER BARMAG

MAX BOBBIN 15 KG

PRODUCTION POY - HOY -SDY

IMPORTANT UNTIL N. 11 DIFFERENT COLOURS (WITH MASTER )

PARTS PLANT:

CHILLER - CDZ CANALAIR - AUTODOFFER GUALCHIERANI - COOLING TOWERS EVAPCO - SILOS ALLUMINIUM - SPARE PARTS

 

* DISMANTLING AND LOADING IS INCLUDED *

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: R-6814 

LIROPOL TOWEL KNITTING MACHINES, RIUS WARPER, CREELS

 

(2) X LIROPOL TOWEL KNITTING MACHINES – RUNNING,

MODEL 114133 – YEAR 1994

MACHINE WIDTH 2500mm

GAUGE 12  (NEEDLES PER INCH) 

(1) X RIUS WARPER MODEL A-3 30/30

 

(1) X CREEL WITH STOP MOTION 260 POSITIONS – FOR COTTON

 

(1) X CREEL FOR WARPER 260 POSITIONS, FOR POLYESTER YARN, WITH HYDRAULIC TENSION CONTROL

 

(60) X ALUMINUM WARP BEAMS FOR COTTON 21 x 30

 

(30) X WARP BEAMS, 21 x 21 FOR POLYESTER

 

(1) X MOTORIZED PLATFORM FOR RIUS WARPER

Learn More

REFERENCE NUMBER: M-5064 (121225HTJ11UX) L TSUDAKOMA WIDE WIDTH WATER JET WEAVING LOOMS FOR ACETATE YEAR 2006 WIDTH 3400mm TSUDAKOMA WATER JET LOOMS MANUFACTURING YEAR: 2006 WIDTH: 3400mm 2 WEFT FEEDERS CRANK SHEDDING 6 SHAFTS THESE LOOMS ARE SPECIAL EXECUTION OF TSUDAKOMA SPECIALLY PRODUCED FOR WIDE WIDTH WATER JET WEAVING SAMPLE WARP CAN BE SIZED FOR TRIAL AND CUSTOMER CAN SEE IT DURING RUNNING IF REQUESTED, 1 PIECE BEAM CAN ALSO BE SUPPLIED FOR ACETATE RUNNING NOW AT 450ppm AT 95% EFFICIENCY INCLUDES 1.5 PCS BEAM AND 1 PC REED QUANTITY AVAILABLE: 36 Learn More

REFERENCE NUMBER: P-2121 RIETER D30 DRAW FRAMES YEAR 2001 RIETER TYPE: D30 DRAW FRAMES YEAR: 2001 SUITABLE FOR COTTON, POLYESTER OR MIXED UP TO 80mm SPEED 250 to 1000 M/MIN DRAFTING 3 OVER 3 PRESSION BAR REGULATION – ELECTRONIC INTEGRATED DUST ASPIRATION AUTOMATIC CAN CHANGER 18 INCHES x 42 INCHES CAN SIZE CREEL WITH SENSORS RIETER QUALITY MONITORS VOLTAGE: 220 VOLTS, 60 HERTZ 11.6 KILOWATTS POWER PNEUMATIC DRAFTING SYSTEM RSB D30 YEAR 2001 CARDS: C 1/2 – 1976 - COTTON C 1/3 – 1984 – POLYESTER C 1/3 – 1982 – POLYESTER ADDITIONAL DRAW FRAMES: 2 DO/2 YEAR: 1985 QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: A-1180 (1212GHBXX11) A MURATA JET SPINNER MVS 810 14 set x 72 SPINDLES set MURATA JET SPINNER 1. Type: MVS 810 2. Q'nty: 14 set x 72 SPINDLES / set 3. Year: 1) 2001: 1 set 2) 2002: 1 set 3) 2003: 2 set 4) 2004: 10 set 4. Working Yarn count :( Ne16-100/1) 5. Knotting: Fisherman Knot 6. Cone angle: 0 and 2 deg’ 7. With Auto doffer per each set 8. RPM: 380 and 400 9. Max package diaMETER: 300 mm diaMETER 10. Production Yarn: Polyester /cotton, Polyester/rayon, 100% rayon, Acryl / Polyester, 100% cotton, Acryl/Cotton etc 11. Production: 740 kg/day/set (21,600 Kg/month/set) QUANTITY AVAILABLE: 1 Learn More

V-1360 SANTEX THERMOBONDING COMPRESSION OVEN FOR NONWOVENS ON ROLL, 80 TO 400 G/M, YEAR 1986

WORKING WIDTH: 2500mm
ROLL FACE WIDTH: WORKING WIDTH + 50mm
MATERIAL FIBERS: NONWOVEN WEB OF POLYESTER OR DIFFERENT FIBERS MIXED WITH 10 TO 25% POLYESTER BI-COMPONENT BINDER FIBERS OR DIFFERENT BINDER FIBERS
MACHINE SPEED: 1 TO 20 M/MIN. (OTHERS UPON REQUEST)
COMPOSITION OVEN: 2 HEATING ZONES OF 2 M EACH + 1 COOLING SECTION

QUANTITY: 1

Learn More

• Air permeable
The mesh openings on two sides and the porous structure allow free air flow and vapor emission from all six sides, effectively inhibiting the growth of molds, bacteria and mites and thus preventing skin itches.

• Stress-relieving and body-fitting
The hardness is moderate to reduce the body stress so that human body can fully relax without feeling any compression, avoiding blocking blood flow. There are 40 supporting points per square centimeter, providing meticulous support and fitting the material to the natural curve of human body.

• Easy-to-wash and fast-dry
The material is made from functional fiber, which neither absorbs moisture nor easily reacts chemically with oil and dirt. Water stays no more than one second on the material, while sweat, dirt, and dust can be washed away easily. Therefore, the surface can be cleaned with minimum effort, preventing the growth of mites and bacteria.

• Eco-friendly and non-toxic 
The pure fabric can be fully recycled upon disposal. The combustion products of sponge are cyanides, which are highly toxic; on the contrary, the products of complete combustion of 3D spacer material are water and carbon dioxide, which are non-toxic and totally safe.

• Rollable and portable. 
With superior rollability, it can be easily carried into and out of an elevator, taken to outdoor activities, or stores easily when the seasons change.

 

CONSTRUCTED OF 100% POLYESTER
FEATURES: AIR-PERMEABLE, WATER-PERMEABLE, ECO-FRIENDLY, NON-TOXIC, 100% RECYCLED, ANTI-STATIC, ANTI-MITE, ELASTIC, FLAME-RETARDANT, ETC.
NET “X” STRUCTURE
FOR UPHOLSTERY, MATTRESS TOPPERS, MATS, SEAT CUSHIONS, ETC. 

NO# NAME LENGTH x WIDTH DIMENSIONS APPROX. INCHES THICKNESS
1 CUSHION 450x450mm 17.7 x 17.7 8 INCHES
2 BABY BED 600x1200mm 23.6 x 47.2 8 INCHES
3 STUDENT BED 1000x2000mm 39.3 x 78.7 8 INCHES
4 1.2 METER BED 1200x2000mm 47.2 x 78.7 8 INCHES
5 1.5 METER BED 1500x2000mm 59 x 78.7 8 INCHES
6 1.8 METER BED 1800x2000mm 70.8 x 78.7 8 INCHES
7 QUEEN BED 1524 x 2032mm 60 x 80 8 INCHES

Learn More

J-1375 STALAM HIGH FREQUENCY DRYER, YEAR 2001, 50+50kW

MAKE: STALAM
MODEL: LTRF – RFA-S
YEAR: 2001
RF POWER OUTPUT: 50+50kW
EQUIPPED WITH:
-LOADING STATION 2150mm with POLYESTER BELT WIDTH 2000mm
-1 DRYING SECTION OF 50kW: 4000mm
-1 DRYING SECTION OF 50kW: 4000mm
-UNLOADING STATION 2000mm
OVERALL DIMENSIONS : 12150mm LONG x 2500m WIDE X 3200mm TALL
(THE LEGS CAN BE REMOVED SO THAT THE SHIPPING HEIGHT CAN BE REDUCED TO 2400mm HIGH FOR 40’ HIGH CUBE SHIPPING CONTAINER)
EQUIPPED WITH CONTROL PANEL

QUANTITY: 1

Learn More