Search results for: 'pres'

REFERENCE NUMBER: T-6870 MEDICAL FACE MASK AIR EXCHANGE DIFFERENTIAL PRESSURE TESTER, 60Hz MEDICAL FACE MASKS AIR EXCHANGE DIFFERENTIAL PRESSURE TESTER IS SUITABLE FOR DETERMINING THE AIR EXCHANGE DIFFERENTIAL PRESSURE OF MEDICAL FACE MASKS. IT CAN ALSO BE USED FOR THE DETERMINATION OF OTHER TEXTILE MATERIALS. STANDARDS: EN 14683-2014 ASTM F2100-2019 YY 0469-2011 YY 0969-2013 FEATURES: EQUIPPED WITH HIGH PRECISION DIFFERENTIAL PRESSURE SENSOR, DIGITAL DISPLAY OF THE DIFFERENTIAL PRESSURE OF BOTH SIDES OF THE SPECIMEN; SPECIAL SAMPLE HOLDERS TO ENSURE CLAMP THE SPECIMEN FIRMLY. KEY SPECIFICATION: AIR SOURCE: SUCTION TYPE AIRFLOW: 8L/MIN SEALING METHOD: END FACE SEAL DIAMETER OF TEST AREA: Ф25mm RANGE OF DIFFERENTIAL PRESSURE SENSOR: 0 TO 500PA DISPLAY METHOD: DIGITAL DISPLAY OF THE DIFFERENTIAL PRESSURE POWER SUPPLY: AC220V, 60Hz QUANTITY: 1 SET Learn More

NON-INVASIVE VENTILATOR
CERTIFICATE: CE
MEDICAL VENTILATOR
TECHNICAL PARAMETERS OF DOUBLE LEVEL VENTILATOR
VENTILATOR TYPE: ELECTRIC CONTROL
SCOPE OF APPLICATION: TREATMENT AND TITRATION OF SLEEP APNEA HYPOPNEA SYNDROME, SEVERE SNORING, AND RESPIRATORY INSUFFICIENCY.
DISPLAY INTERFACE: 3.5-INCH LED SCREEN, CHINESE OPERATING SYSTEM
*VENTILATION MODE: CPAP, S, S/T, T
PRESSURE RANGE:
PRESSURE RANGE: 4-30CMH2O (±0.5CMH2O)
PRESSURE ACCURACY: + 0.5CMH2O
PARAMETER SETTING:
DELAYED BOOST: 0-60MIN, SET THE DIVISION INTERVAL 5MIN
INITIAL PRESSURE: 4CMH2O TREATMENT PRESSURE / RESPIRATORY PRESSURE SETTING
THERAPEUTIC PRESSURE: 4-20CMH2O (IN CPAP MODE)
TARGET TIDAL VOLUME: 150ML - 1500ML, ON/ OFF
MAXIMUM SUCTION PRESSURE: 4-30CMH2O, (CAN BE SET WHEN THE TARGET TIDAL VOLUME FUNCTION IS ON)
MINIMUM SUCTION PRESSURE: 4-30CMH2O (NOT HIGHER THAN THE SUCTION PRESSURE), (CAN BE SET WHEN THE TARGET TIDAL VOLUME FUNCTION IS ON)
INSPIRATORY PHASE PRESSURE: 4-30CMH2O
EXPIRATORY PRESSURE: 4-30CMH2O
EXPIRATORY DECOMPRESSION: PATIENT, OFF, 1-3, THREE ADJUSTABLE
MANUAL VOLTAGE REGULATION: 0-2 GEAR, 0-2CMH2O (ONLY AVAILABLE IN CPAP MODE)
INSPIRATORY SENSITIVITY: 1-8 STALLS
EXPIRATORY SENSITIVITY: 1-8 STALLS
RESPIRATORY FREQUENCY: 3-40 TIMES / MIN
INSPIRATORY TIME: 0.3-3.0S
BACKUP RATE: ON / OFF, DEFAULT 10
PRESSURE RISE TIME: 1-4 STALLS
HUMIDIFIER: 1-5 ADJUSTABLE IN 5 GEARS
*TITRATION FUNCTION: SUPPORT MANUAL AND AUTOMATIC PRESSURE TITRATION, BUILT-IN REMOTE WIRELESS COMMUNICATION MODULE, COMPLETE THE RANDOM SWITCHING OF SINGLE AND DOUBLE LEVEL MODES IN THE TITRATION PROCESS, AND CONTROL MORE THAN 11 VENTILATOR PARAMETERS AT THE SAME TIME.
AUXILIARY FUNCTION: AUTOMATIC AIR LEAKAGE COMPENSATION, AUTOMATIC STARTUP, AUTOMATIC SHUTDOWN, DELAYED SHUTDOWN, SCREEN BACKLIGHT ADJUSTMENT
MONITORING PARAMETERS: PRESSURE, TIDAL VOLUME, RESPIRATORY RATE, MINUTE VENTILATION VOLUME, AIR LEAKAGE VOLUME, INSPIRATORY TIME, BLOOD OXYGEN SATURATION
WAVY CURVE: PRESSURE TIME WAVEFORM, FLOW RATE TIME WAVEFORM
ALARM PROMPT: PIPELINE AND MASK FALLING OFF, AIR LEAKAGE PROMPT, POWER INTERRUPTION, TREATMENT MACHINE FAILURE, HUMIDIFIER FAILURE, LOW VOLTAGE, HIGH RESPIRATORY RATE, LOW RESPIRATORY RATE, LOW MINUTE VENTILATION VOLUME, LOW BLOOD OXYGEN, REPLACEMENT OF FILTER COTTON, FULL SD CARD, RE INSERTION OF SD CARD
*DATA MANAGEMENT:
NETWORK DATA: BMC + RESPIRATORY HEALTH MANAGEMENT CLOUD PLATFORM
SD CARD DATA: RESART NPAP DATA ANALYSIS SOFTWARE
PARTS:
SD CARD: STANDARD
SD CARD SLOT: STANDARD
PIPING: 9 22MM, 1.8M LONG
FACE SHIELD: F2 NOSE MASK AS STANDARD
NOISE: LESS THAN 30DB
ENVIRONMENT CONDITION:
TEMPERATURE:
(WHEN USED) 5 -35 C
(DURING TRANSPORTATION AND STORAGE) -20 C -55 C
ATMOSPHERIC PRESSURE:
(WHEN USED) 760-1060HPA
(DURING TRANSPORTATION AND STORAGE) 760-1060HPA
WORKING HOURS: MORE THAN 8 HOURS
POWER SUPPLY REQUIREMENTS:
AC VOLTAGE: 100-240V
FREQUENCY: 50HZ/60HZ
INPUT POWER: LESS THAN 2A
WATERPROOF LEVEL: IP22 - DRIP PROOF EQUIPMENT
INSTRUMENT SIZE: 290mm X 180mm X 134mm
WEIGHT: 1.5KG (EXCLUDING HUMIDIFIER) 2.5KG (INCLUDING HUMIDIFIER)
ITEM 001
QUANTITY: 10 SETS-999 SETS
ITEM 002
QUANTITY: 1,000 SETS-9,999SETS
ITEM 003
QUANTITY: ≥10,000 SETS

Learn More

REFERENCE NUMBER: T-6565

PERSONAL PROTECTIVE EQUIPMENTS FOR SALE

 

ITEM 001

DISPOSABLE PROTECTIVE CLOTHING

MODEL: 500B

MATERIAL: NON-WOVEN MICROPOROUS LAMINATE FILM

SIZES: S, M, L, XL, XXL, 3XL

 

FEATURES:

GARMENTS ARE COMPOSED OF NON-WOVEN MICROPOROUS LAMINATE FILM, 65G/M2, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT.

PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS.

ANTI-STATIC PROPERTIES.

PROTECTION AGAINST INFECTIOUS DISEASES.

BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT.

ONE-PIECE COVERALL WITH HOOD, ZIPPER AT FRONT OPENING COVERED BY FLAP, ELASTICATED CUFFS, ANKLES, HOOD AND WAIST.

STANDARDS: EN 14126: 2003, CE5-B, CE6-B

 

APPLICATIONS:

TRAFFIC CONTROLLING, ROAD CONTROLLING, TRANSPORTATION OF HAZARDOUS CHEMICALSDUTY IN KEY AREAS, POLICE FOR SENSITIVE INCIDENTS, CUSTOMS BORDER INSPECTIONEPIDEMIC PREVENTION SERVICESAPPLICATION FOR GARMENTS INCLUDE THOSE FOUND IN PHARMACEUTICAL HANDLING, CHEMICALPROCESSING, THE OIL AND GAS INDUSTRY, GENERAL MAINTENANCE AND OPERATIONS, AUTOMATIC SPRAY PAINTING AND MANY OTHERS.

 

PACKAGE: 40PCS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 40 PCS / CARTON

WEIGHT: 13 KG / CARTON

INDUSTRIAL

 

ITEM 002

DISPOSABLE PROTECTIVE CLOTHING

MODEL: 400B

MATERIAL: NON-WOVEN MICROPOROUS LAMINATE FILM

SIZES: S, M, L, XL, XXL, 3XL

 

FEATURES:

GARMENTS ARE COMPOSED OF NON-WOVEN MICROPOROUS LAMINATE FILM, 65G/M2, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT.

PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS.

ANTI-STATIC PROPERTIES.

PROTECTION AGAINST INFECTIOUS DISEASES.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT.ONE-PIECE COVERALL WITH HOOD,ZIPPER AT FRONT OPENING COVERED BY FLAP, ELASTICATED CUFFS, ANKLES, HOOD AND WAIST, HEAT SEALED SEAMS WITH TAPE.

STANDARDS: EN 14126: 2003, CE4-B, CE5-B, CE6-B

 

APPLICATIONS:

IT CAN PROVIDE BARRIER AND PROTECTION FOR MEDICAL STAFF TO DIRECTLY CONTACT WITH PATIENTS OR SUSPECTED PATIENTS.

APPLICATIONS FOR IT INCLUDE MAINTENANCE AND DISMANTLING JOBS IN THE NUCLEAR INDUSTRY, PHARMACEUTICAL MANUFACTURING OR IN RESEARCH AND BIOSECURITY LABORATORIES, AS WELL AS IN MEDICAL APPLICATIONS AND WHEN EXPOSED TO BIOLOGICAL HAZARDS.

 

PACKAGE: 40PCS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 40 PCS / CARTON

WEIGHT: 13.5KG / CARTON

INDUSTRIAL

 

ITEM 003

DISPOSABLE PROTECTIVE BOOT COVER

MODEL: BT500

MATERIAL: NON-WOVEN MICROPOROUS LAMINATE FILM

PRODUCT NAME: DISPOSABLE PROTECTIVE BOOT COVER

SIZES: 480mmIN HEIGHT X 350mm IN SOLE LENGTH

 

FEATURES:

BOOT COVER IS COMPOSED OF NON-WOVEN MICROPOROUS LAMINATE FILM, 65G/M2, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT.

PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS.

ANTI-STATIC PROPERTIES.

PROTECTION AGAINST INFECTIOUS DISEASES.

BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT.

STANDARDS: EN 14126: 2003, CE5-B, CE6-B

 

APPLICATIONS:

TRAFFIC CONTROLLING, ROAD CONTROLLING, TRANSPORTATION OF HAZARDOUS CHEMICALS.

DUTY IN KEY AREAS, POLICE FOR SENSITIVE INCIDENTS, CUSTOMS BORDER INSPECTION.

EPIDEMIC PREVENTION SERVICES.

APPLICATION FOR BOOT COVER INCLUDE THOSE FOUND IN PHARMACEUTICAL HANDLING, CHEMICAL PROCESSING, THE OIL AND GAS INDUSTRY, GENERAL MAINTENANCE AND OPERATIONS, AUTOMATIC SPRAY PAINTING AND MANY OTHERS.

 

PACKAGE: 150 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 150 PAIRS / BOX

CARTON SIZE: 650 X 400 X 400mm

WEIGHT: 10.6KG / CARTON

INDUSTRIAL

 

ITEM 004

DISPOSABLE PROTECTIVE BOOT COVER (WITH ANTISLIP STRIP ON THE SOLE)

MODEL: BT501

MATERIAL: NON-WOVEN MICROPOROUS LAMINATE FILM

PRODUCT NAME: DISPOSABLE PROTECTIVE

BOOT COVER SIZES: 480mm IN HEIGHT X 350mm IN SOLE LENGTH

 

FEATURES:

SLIP-RETARDANT SOLE, BOOT COVER IS COMPOSED OF NON-WOVEN MICROPOROUS LAMINATE FILM, 65G/M2, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT.

PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS.

ANTI-STATIC PROPERTIES.

PROTECTION AGAINST INFECTIOUS DISEASES.

BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT.

STANDARDS: EN 14126: 2003, CE5-B, CE6-B

 

APPLICATIONS:

TRAFFIC CONTROLLING, ROAD CONTROLLING, TRANSPORTATION OF HAZARDOUS CHEMICALS.

DUTY IN KEY AREAS, POLICE FOR SENSITIVE INCIDENTS, CUSTOMS BORDER INSPECTION.

EPIDEMIC PREVENTION SERVICES.

APPLICATION FOR THIS INCLUDE THOSE FOUND IN PHARMACEUTICAL HANDLING, CHEMICAL PROCESSING, THE OIL AND GAS INDUSTRY, GENERAL MAINTENANCE AND OPERATIONS, AUTOMATIC SPRAY PAINTING AND MANY OTHERS.

 

PACKAGE: 150 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 150 PAIRS / BOX

CARTON SIZE: 650 X 400 X 400mm

WEIGHT: 11.1 KG / CARTON

INDUSTRIAL

 

ITEM 005

DISPOSABLE PROTECTIVE BOOT COVER

MODEL: BT400

MATERIAL: NON-WOVEN MICROPOROUS LAMINATE FILM

PRODUCT NAME: DISPOSABLE PROTECTIVE BOOT COVER

SIZES: 500mm IN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

BOOT COVER IS COMPOSED OF NON-WOVEN MICROPOROUS LAMINATE FILM, 65G/M2, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT.

PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS.

ANTI-STATIC PROPERTIES.

PROTECTION AGAINST INFECTIOUS DISEASES.

BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT.

STANDARDS: EN 14126: 2003, CE4-B, CE5-B, CE6-B

 

APPLICATIONS:

IT CAN PROVIDE BARRIER AND PROTECTION FOR MEDICAL STAFF TO DIRECTLY CONTACT WITH PATIENTS OR SUSPECTED PATIENTS.

APPLICATIONS FOR IT INCLUDE MAINTENANCE AND DISMANTLING JOBS IN THE NUCLEAR INDUSTRY, PHARMACEUTICAL MANUFACTURING OR IN RESEARCH AND BIOSECURITY LABORATORIES, AS WELL AS IN MEDICAL APPLICATIONS AND WHEN EXPOSED TO BIOLOGICAL HAZARDS.

 

PACKAGE: 150 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 150 PAIRS / BOX

CARTON SIZE: 650 X 400 X 400mm

WEIGHT: 11.6 KG / CARTON

INDUSTRIAL

 

ITEM 006

DISPOSABLE PROTECTIVE BOOTS COVER (WITH ANTISLIP STRIP ON THE SOLE)

MODEL: BT401

MATERIAL: NON-WOVEN MICROPOROUS LAMINATE FILM

PRODUCT NAME: DISPOSABLE PROTECTIVE BOOT COVER

SIZES: 500mmIN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

SLIP-RETARDANT SOLE, BOOT COVER IS COMPOSED OF NON-WOVEN MICROPOROUS LAMINATE FILM, 65G/M2, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT.

PERMEABLE TO BOTH AIR AND WATER VAPOUR, YETREPELS WATER-BASED LIQUIDS AND AEROSOLS.

ANTI-STATIC PROPERTIES.

PROTECTION AGAINST INFECTIOUS DISEASES.

BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT.

STANDARDS: EN 14126: 2003, CE4-B, CE5-B, CE6-B

 

APPLICATIONS:

IT CAN PROVIDE BARRIER AND PROTECTION FOR MEDICAL STAFF TO DIRECTLY CONTACT WITH PATIENTS OR SUSPECTED PATIENTS.

APPLICATIONS FOR IT INCLUDE MAINTENANCE AND DISMANTLING JOBS IN THE NUCLEAR INDUSTRY, PHARMACEUTICAL MANUFACTURING OR IN RESEARCH AND BIOSECURITY LABORATORIES, AS WELL AS IN MEDICAL APPLICATIONS AND WHEN EXPOSED TO BIOLOGICAL HAZARDS.

 

PACKAGE: 150 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 150 PAIRS / BOX

CARTON SIZE: 650 X 400 X 400mm

WEIGHT: 11.2KG / CARTON

INDUSTRIAL

 

ITEM 007

DISPOSABLE PROTECTIVE SHOES COVER

MODEL: ST500

MATERIAL: NON-WOVEN MICROPOROUS LAMINATE FILM

PRODUCT NAME: DISPOSABLE PROTECTIVE SHOE COVER

SIZES: 300mmIN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

SHOE COVER IS COMPOSED OF NON-WOVEN MICROPOROUS LAMINATE FILM, 65G/M2, PROVIDINGAN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT.

PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS.

ANTI-STATIC PROPERTIES.

PROTECTION AGAINST INFECTIOUS DISEASES.

BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT.

STANDARDS: EN 14126: 2003, CE5-B, CE6-B

 

APPLICATIONS:

TRAFFIC CONTROLLING, ROAD CONTROLLING, TRANSPORTATION OF HAZARDOUS CHEMICALS.DUTY IN KEY AREAS, POLICE FOR SENSITIVE INCIDENTS, CUSTOMS BORDER INSPECTION.

EPIDEMIC PREVENTION SERVICES.

APPLICATION FOR SHOE COVER INCLUDE THOSE FOUND IN PHARMACEUTICAL HANDLING, CHEMICAL PROCESSING, THE OIL AND GAS INDUSTRY, GENERAL MAINTENANCE AND OPERATIONS, AUTOMATIC SPRAY PAINTING AND MANY OTHERS.

 

PACKAGE: 200 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 200 PAIRS / BOX

CARTON SIZE: 650 X 400 X 400mm

WEIGHT: 7.3KG / CARTON

INDUSTRIAL

 

ITEM 008

DISPOSABLE PROTECTIVE SHOES COVER (WITH ANTISLIP STRIP ON THE SOLE)

MODEL: ST501

MATERIAL: NON-WOVEN MICROPOROUS LAMINATE FILM

PRODUCT NAME: DISPOSABLE PROTECTIVE SHOE COVER

SIZES: 300mmIN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

SLIP-RETARDANT SOLE, SHOE COVER IS COMPOSED OF NON-WOVEN MICROPOROUS LAMINATE FILM, 65G/M2, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT.

PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS.

ANTI-STATIC PROPERTIES.

PROTECTION AGAINST INFECTIOUS DISEASES.

BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT.

STANDARDS: EN 14126: 2003, CE5-B, CE6-B

 

APPLICATIONS:

TRAFFIC CONTROLLING, ROAD CONTROLLING, TRANSPORTATION OF HAZARDOUS CHEMICALS.

DUTY IN KEY AREAS, POLICE FOR SENSITIVE INCIDENTS, CUSTOMS BORDER INSPECTION.

EPIDEMIC PREVENTION SERVICES.APPLICATION FOR THIS INCLUDE THOSE FOUND IN PHARMACEUTICAL HANDLING, CHEMICAL PROCESSING, THE OIL AND GAS INDUSTRY, GENERAL MAINTENANCE AND OPERATIONS, AUTOMATIC SPRAY PAINTING AND MANY OTHERS.

 

PACKAGE: 200 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 200 PAIRS / BOX

CARTON SIZE: 650 X 400 X 400mm
WEIGHT: 7.8 KG / CARTON

INDUSTRIAL

 

ITEM 009

DISPOSABLE PROTECTIVE SHOES COVER

MODEL: ST400

MATERIAL: NON-WOVEN MICROPOROUS LAMINATE FILM

PRODUCT NAME: DISPOSABLE PROTECTIVE SHOE COVER

SIZES: 300mm IN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

SHOE COVER IS COMPOSED OF NON-WOVEN MICROPOROUS LAMINATE FILM, 65G/M2, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT.

PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS.

ANTI-STATIC PROPERTIES.

PROTECTION AGAINST INFECTIOUS DISEASES.

BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT.

STANDARDS: EN 14126: 2003, CE4-B, CE5-B, CE6-B

 

APPLICATIONS:

IT CAN PROVIDE BARRIER AND PROTECTION FOR MEDICAL STAFF TO DIRECTLY CONTACT WITH PATIENTS OR SUSPECTED PATIENTS. APPLICATIONS FOR IT INCLUDE MAINTENANCE AND DISMANTLING JOBS IN THE NUCLEAR INDUSTRY, PHARMACEUTICAL MANUFACTURING OR IN RESEARCH AND BIOSECURITY LABORATORIES, AS WELL AS IN MEDICAL APPLICATIONS AND WHEN EXPOSED TO BIOLOGICAL HAZARDS.

 

PACKAGE: 200 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 200 PAIRS / BOX

CARTON SIZE: 650 X 400 X 400mm

WEIGHT: 8.3 KG / CARTON

INDUSTRIAL

 

ITEM 010

DISPOSABLE PROTECTIVE SHOES COVER (WITH ANTISLIP STRIP ON THE SOLE)

MODEL: ST401

MATERIAL: NON-WOVEN MICROPOROUS LAMINATE FILM

PRODUCT NAME: DISPOSABLE PROTECTIVE SHOE COVER

SIZES: 300mm IN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

SLIP-RETARDANT SOLE, SHOE COVER IS COMPOSED OF NON-WOVEN MICROPOROUS LAMINATE FILM, 65G/M2, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT.

PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS.
ANTI-STATIC PROPERTIES.

PROTECTION AGAINST INFECTIOUS DISEASES.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT. STANDARDS: EN 14126: 2003, CE4-B, CE5-B, CE6-B

 

APPLICATIONS:

IT CAN PROVIDE BARRIER AND PROTECTION FOR MEDICAL STAFF TO DIRECTLY CONTACT WITH PATIENTS OR SUSPECTED PATIENTS. APPLICATIONS FOR IT INCLUDE MAINTENANCE AND DISMANTLING JOBS IN THE NUCLEARINDUSTRY, PHARMACEUTICAL MANUFACTURING OR IN RESEARCH AND BIOSECURITY LABORATORIES, AS WELL AS IN MEDICAL APPLICATIONS AND WHEN EXPOSED TO BIOLOGICAL HAZARDS.

 

PACKAGE: 200 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 200 PAIRS / BOX

CARTON SIZE: 650 X400 X 400mm

WEIGHT: 8.8 KG / CARTON

INDUSTRIAL

 

ITEM 011

DISPOSABLE PROTECTIVE CLOTHING

MODEL: TK1

MATERIAL: DUPONTTM TYVEK® 1422A FABRIC

SIZES: 170/M (165-175), 175/L (170-180), 180/XL(175-185)

 

FEATURES:

1.GARMENTS ARE COMPOSED OF FLASH SPUN HIGH DENSITY POLYETHYLENE, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT

2.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT

3.GARMENTS IS PERMEABLE TO BOTH AIR AND WATER VAPOUR, YETREPELS WATER-BASED LIQUIDS AND AEROSOLS. IT OFFERS AN EXCELLENT BARRIER AGAINST FINE PARTICLES AND FIBRES (DOWN TO 1 MICRON IN SIZE), IS ULTRA-LOW-LINTING. SILICON NON-ADDED

4.TUNNELLED ELASTICATION AT WRISTS, ANKLES AND FACE, THUMB LOOPS5.

5.ANTI-STATIC PROPERTIES

6.PROTECTION AGAINST INFECTIOUS DISEASESCERTIFICATIONS: CHEMICAL PROTECTIVE CLOTHING, CATEGORY III, TYPE 5-B AND 6-B, EN 14126 (PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS), ANTISTATIC TREATMENT (EN 1149-5) -ON BOTH SIDES

 

APPLICATION:

1.TRAFFIC CONTROLLING, ROAD CONTROLLING, TRANSPORTATION OF HAZARDOUS CHEMICALS
2.DUTY IN KEY AREAS, POLICE FOR SENSITIVE INCIDENTS, CUSTOMS BORDER INSPECTION

3.EPIDEMIC PREVENTION SERVICES

4.PHARMACEUTICAL HANDLING, CHEMICAL PROCESSING, THE OIL AND GAS INDUSTRY, GENERAL MAINTENANCE AND OPERATIONS, AUTOMATIC SPRAY PAINTING AND MANY OTHERS.

 

PACKAGE: 60PCS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 60 PCS / CARTON

WEIGHT: 13 KG / CARTON

STANDARDS: EN14126-2003, CE5-B, CE6-B

MEDICAL / INDUSTRIAL

 

ITEM 012

DISPOSABLE PROTECTIVE CLOTHING

MODEL: JT1

MATERIAL: DUPONTTM TYVEK® 1422A FABRIC

SIZES: 170/M (165-175), 175/L (170-180), 180/XL(175-185)

 

FEATURES:

1.GARMENTS ARE COMPOSED OF FLASH SPUN HIGH DENSITY POLYETHYLENE, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT

2.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT

3.GARMENTS IS PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS. IT OFFERS AN EXCELLENT BARRIER AGAINST FINE PARTICLES AND FIBRES (DOWN TO 1 MICRON IN SIZE), IS ULTRA-LOW-LINTING. SILICON NON-ADDED

4.BLUE TAPED SEAMS FOR OPTIONAL PROTECTION AND GOOD VISIBILITY

5.TUNNELLED ELASTICATION AT WRISTS, ANKLES AND FACE, THUMB LOOPS

6.ANTI-STATIC PROPERTIES

7.PROTECTION AGAINST INFECTIOUS DISEASES

 

CERTIFICATIONS: CHEMICAL PROTECTIVE CLOTHING, CATEGORY III, TYPE 4-B, 5-B AND 6-B, EN 14126 (PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS), ANTISTATIC TREATMENT (EN 1149-5) -ON BOTH SIDES

 

APPLICATION:

1.IT CAN PROVIDE BARRIER AND PROTECTION FOR MEDICAL STAFF TO DIRECTLY CONTACT WITH PATIENTS OR SUSPECTED PATIENTS.

2.MAINTENANCE AND DISMANTLING JOBS IN THE NUCLEAR INDUSTRY, PHARMACEUTICAL MANUFACTURING OR IN RESEARCH AND BIOSECURITY LABORATORIES, AS WELL AS IN MEDICAL APPLICATIONSAND WHEN EXPOSED TO BIOLOGICAL HAZARDS.

 

PACKAGE: 60PCS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 60 PCS / CARTON

WEIGHT: 13.5 KG / CARTON

STANDARDS: EN14126-2003, CE4-B, CE5-B, CE6-B

MEDICAL / INDUSTRIAL

 

ITEM 013

DISPOSABLE PROTECTIVE BOOT COVER

MODEL: XT1

MATERIAL: DUPONTTM TYVEK® 1422A FABRIC, 41G/M2

SIZES: 480mmIN HEIGHT X 350mm IN SOLE LENGTH

 

FEATURES:

1.BOOT COVER ARE COMPOSED OF FLASH SPUN HIGH DENSITY POLYETHYLENE, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT

2.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT

3.BOOT COVER IS PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS. IT OFFERS AN EXCELLENT BARRIER AGAINST FINE PARTICLES AND FIBRES (DOWN TO 1 MICRONIN SIZE), IS ULTRA-LOW-LINTING. SILICON NON-ADDED

4.SHOE COVER WITH ELASTIC TOP5.ANTI-STATIC PROPERTIES6.PROTECTION AGAINST INFECTIOUS DISEASES

CERTIFICATIONS: CHEMICAL PROTECTIVE CLOTHING, CATEGORY III, 5-B AND 6-B, EN 14126 (PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS), ANTISTATIC TREATMENT (EN 1149-5) -ON BOTH SIDES

 

APPLICATION:

1.TRAFFIC CONTROLLING, ROAD CONTROLLING, TRANSPORTATION OF HAZARDOUS CHEMICALS

2.DUTY IN KEY AREAS, POLICE FOR SENSITIVE INCIDENTS, CUSTOMS BORDER INSPECTION

3.EPIDEMIC PREVENTION SERVICES

4.PHARMACEUTICAL HANDLING, CHEMICAL PROCESSING, THE OIL AND GAS INDUSTRY, GENERAL MAINTENANCE AND OPERATIONS, AUTOMATIC SPRAY PAINTING AND MANY OTHERS.

 

PACKAGE: 200 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 200 PAIRS / CTN

STANDARDS: EN14126-2003, CE5-B, CE6-B

MEDICAL / INDUSTRIAL

 

ITEM 014

DISPOSABLE PROTECTIVE BOOT COVER (WITH ANTISLIP STRIP ON THE SOLE)

MODEL: BT1S

MATERIAL: DUPONTTM TYVEK® 1422A FABRIC, 41G/M2

 SIZES: 480mm IN HEIGHT X 350mm IN SOLE LENGTH

 

FEATURES:

1.ANTISLIP DESIGN ON THE SOLE

2.BOOT COVER ARE COMPOSED OF FLASH SPUN HIGH DENSITY POLYETHYLENE, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT

3.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT

4.BOOT COVER IS PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS. IT OFFERS AN EXCELLENT BARRIER AGAINST FINE PARTICLES AND FIBRES (DOWN TO 1 MICRON IN SIZE), IS ULTRA-LOW-LINTING. SILICON NON-ADDED

5.SHOE COVER WITH ELASTIC TOP6.ANTI-STATIC PROPERTIES7.PROTECTION AGAINST INFECTIOUS DISEASES

CERTIFICATIONS: CHEMICAL PROTECTIVE CLOTHING, CATEGORY III, 5-B AND 6-B, EN 14126 (PROTECTIVE CLOTHING AGAINST INFECTIVEAGENTS), ANTISTATIC TREATMENT (EN 1149-5) -ON BOTH SIDES

 

APPLICATION:

1.TRAFFIC CONTROLLING, ROAD CONTROLLING, TRANSPORTATION OF HAZARDOUS CHEMICALS

2.DUTY IN KEY AREAS, POLICE FOR SENSITIVE INCIDENTS, CUSTOMS BORDER INSPECTION

3.EPIDEMIC PREVENTION SERVICES

4.PHARMACEUTICAL HANDLING, CHEMICAL PROCESSING, THE OIL AND GAS INDUSTRY, GENERAL MAINTENANCE AND OPERATIONS, AUTOMATIC SPRAY PAINTING AND MANY OTHERS.

 

PACKAGE: 200 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 200 PAIRS / CTN

STANDARDS: EN14126-2003, CE5-B, CE6-B

MEDICAL / INDUSTRIAL

 

ITEM 015

DISPOSABLE PROTECTIVE BOOT COVER

MODEL: XT-JT1MATERIAL: DUPONTTM TYVEK® 1422A FABRIC, 41G/M2

SIZES: 500mm IN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

1.BOOT COVER ARE COMPOSED OF FLASH SPUN HIGH DENSITY POLYETHYLENE, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT

2.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT

3.BOOT COVER IS PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS. IT OFFERS AN EXCELLENT BARRIER AGAINST FINE PARTICLES AND FIBRES (DOWN TO 1 MICRON IN SIZE), IS ULTRA-LOW-LINTING. SILICON NON-ADDED

4.BOOT COVER WITH ELASTIC TOP

5.BLUE TAPED SEAMS FOR OPTIONAL PROTECTION AND GOOD VISIBILITY

6.ANTI-STATIC PROPERTIES

7.PROTECTION AGAINST INFECTIOUS DISEASES

'CERTIFICATIONS: CHEMICAL PROTECTIVE CLOTHING, CATEGORY III, TYPE 4-B, 5-B AND 6-B, EN 14126 (PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS), ANTISTATIC TREATMENT (EN 1149-5) -ON BOTH SIDES

 

APPLICATION:

1.IT CAN PROVIDE BARRIER AND PROTECTION FOR MEDICAL STAFF TO DIRECTLY CONTACT WITH PATIENTS OR SUSPECTED PATIENTS.

 2.MAINTENANCE AND DISMANTLING JOBS IN THE NUCLEAR INDUSTRY, PHARMACEUTICAL MANUFACTURING OR IN RESEARCH AND BIOSECURITY LABORATORIES, AS WELL AS IN MEDICAL APPLICATIONS AND WHEN EXPOSED TO BIOLOGICAL HAZARDS.

 

PACKAGE: 200 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 200 PAIRS / CTN

STANDARDS: EN14126-2003, CE4-B, CE5-B, CE6-B

MEDICAL / INDUSTRIAL

 

ITEM 016

DISPOSABLE PROTECTIVE BOOT COVER (WITH ANTISLIP STRIP ON THE SOLE)

MODEL: XT-JT1

MATERIAL: DUPONTTM TYVEK® 1422A FABRIC, 41G/M2

SIZES: 500mm IN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

1.BOOT COVER ARE COMPOSED OF FLASH SPUN HIGH DENSITY POLYETHYLENE, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT

2.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT

3.BOOT COVER IS PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS. IT OFFERS AN EXCELLENT BARRIER AGAINST FINE PARTICLES AND FIBRES (DOWN TO 1 MICRON IN SIZE), IS ULTRA-LOW-LINTING. SILICON NON-ADDED

4.BOOT COVER WITH ELASTIC TOP

5.BLUE TAPED SEAMS FOR OPTIONAL PROTECTION AND GOOD VISIBILITY

6.ANTI-STATIC PROPERTIES

7.PROTECTION AGAINST INFECTIOUS DISEASES

CERTIFICATIONS: CHEMICAL PROTECTIVE CLOTHING, CATEGORY III, TYPE 4-B, 5-B AND 6-B, EN 14126 (PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS), ANTISTATIC TREATMENT (EN 1149-5) -ON BOTH SIDES

 

APPLICATION:

1.IT CAN PROVIDE BARRIER AND PROTECTION FOR MEDICAL STAFF TO DIRECTLY CONTACT WITH PATIENTS OR SUSPECTED PATIENTS.

2.MAINTENANCE AND DISMANTLING JOBS IN THE NUCLEAR INDUSTRY, PHARMACEUTICAL MANUFACTURING OR IN RESEARCH AND BIOSECURITY LABORATORIES, AS WELL AS IN MEDICAL APPLICATIONS AND WHEN EXPOSED TO BIOLOGICAL HAZARDS.

 

PACKAGE: 200 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 200 PAIRS / CTN

STANDARDS: EN14126-2003, CE4-B, CE5-B, CE6-B

MEDICAL / INDUSTRIAL

 

ITEM 017

DISPOSABLE PROTECTIVE SHOE COVER

MODEL: ST1

MATERIAL: DUPONTTM TYVEK® 1422A FABRIC, 41G/M2

SIZES: 300mm IN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

1.SHOE COVER ARE COMPOSED OF FLASH SPUN HIGH DENSITY POLYETHYLENE, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT

2.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT

3.SHOE COVER IS PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS. IT OFFERS AN EXCELLENT BARRIER AGAINST FINE PARTICLES AND FIBRES (DOWN TO 1 MICRON IN SIZE), IS ULTRA-LOW-LINTING. SILICON NON-ADDED

4.SHOE COVER WITH ELASTIC TOP

5.ANTI-STATIC PROPERTIES

6.PROTECTION AGAINST INFECTIOUS DISEASES

CERTIFICATIONS: CHEMICAL PROTECTIVE CLOTHING, CATEGORY III, 5-B AND 6-B, EN 14126 (PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS), ANTISTATIC TREATMENT (EN 1149-5) -ON BOTH SIDES

 

APPLICATION:

1.TRAFFIC CONTROLLING, ROAD CONTROLLING, TRANSPORTATION OF HAZARDOUS CHEMICALS

2.DUTY IN KEY AREAS, POLICE FOR SENSITIVE INCIDENTS, CUSTOMS BORDER INSPECTION

3.EPIDEMIC PREVENTION SERVICES

4.PHARMACEUTICAL HANDLING, CHEMICAL PROCESSING, THE OIL AND GAS INDUSTRY, GENERAL MAINTENANCE AND OPERATIONS, AUTOMATIC SPRAY PAINTING AND MANY OTHERS.

 

PACKAGE: 250 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 250 PAIRS / CARTON

STANDARDS: EN14126-2003, CE5-B, CE6-B

MEDICAL / INDUSTRIAL

 

 

ITEM 018

DISPOSABLE PROTECTIVE SHOE COVER (WITH ANTISLIP STRIP ON THE SOLE)
MODEL: ST1S

MATERIAL: DUPONTTM TYVEK® 1422A FABRIC, 41G/M2

SIZES: 300mm IN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

1.ANTISLIP DESIGN ON THE SOLE

2.SHOE COVER ARE COMPOSED OF FLASH SPUN HIGH DENSITY POLYETHYLENE, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT

3.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT

4.SHOE COVER IS PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS. IT OFFERS AN EXCELLENT BARRIER AGAINST FINE PARTICLES AND FIBRES (DOWN TO 1 MICRON IN SIZE), IS ULTRA-LOW-LINTING. SILICON NON-ADDED

5.SHOE COVER WITH ELASTIC TOP6.ANTI-STATIC PROPERTIES7.PROTECTION AGAINST INFECTIOUS DISEASES

CERTIFICATIONS: CHEMICAL PROTECTIVE CLOTHING, CATEGORY III, 5-B AND 6-B, EN 14126 (PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS), ANTISTATIC TREATMENT (EN 1149-5) -ON BOTH SIDES

 

APPLICATION:

1.TRAFFIC CONTROLLING, ROAD CONTROLLING, TRANSPORTATION OF HAZARDOUS CHEMICALS

2.DUTY IN KEY AREAS, POLICE FOR SENSITIVE INCIDENTS, CUSTOMS BORDER INSPECTION

3.EPIDEMIC PREVENTION SERVICES

4.PHARMACEUTICAL HANDLING, CHEMICAL PROCESSING, THE OIL AND GAS INDUSTRY, GENERAL MAINTENANCE AND OPERATIONS, AUTOMATIC SPRAY PAINTING AND MANY OTHERS.

 

PACKAGE:

250 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 250 PAIRS / CARTON

STANDARDS: EN14126-2003, CE5-B, CE6-B

MEDICAL / INDUSTRIAL

 

ITEM 019

DISPOSABLE PROTECTIVE SHOE COVER

MODEL: ST-JT1

MATERIAL: DUPONTTM TYVEK® 1422A FABRIC, 41G/M2

SIZES:300mm IN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

1.SHOE COVER ARE COMPOSED OF FLASH SPUN HIGH DENSITY POLYETHYLENE, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT

2.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT

3.SHOE COVER IS PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS. IT OFFERS AN EXCELLENT BARRIER AGAINST FINE PARTICLES AND FIBRES (DOWN TO 1 MICRON IN SIZE), IS ULTRA-LOW-LINTING. SILICON NON-ADDED

4.SHOE COVER WITH ELASTIC TOP

5.BLUE TAPED SEAMS FOR OPTIONAL PROTECTION AND GOOD VISIBILITY

6.ANTI-STATIC PROPERTIES

7.PROTECTION AGAINST INFECTIOUS DISEASESCERTIFICATIONS: CHEMICAL PROTECTIVE CLOTHING, CATEGORY III, TYPE 4-B, 5-B AND 6-B, EN 14126 (PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS), ANTISTATIC TREATMENT (EN 1149-5) -ON BOTH SIDES

 

APPLICATION:

1.IT CAN PROVIDE BARRIER AND PROTECTION FOR MEDICAL STAFF TO DIRECTLY CONTACT WITH PATIENTS OR SUSPECTED PATIENTS.

2.MAINTENANCE AND DISMANTLING JOBS IN THE NUCLEAR INDUSTRY, PHARMACEUTICAL MANUFACTURING OR IN RESEARCH AND BIOSECURITY LABORATORIES, AS WELL AS IN MEDICAL APPLICATIONS AND WHEN EXPOSED TO BIOLOGICAL HAZARDS.

 

PACKAGE:

250 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 250 PAIRS / CARTON

STANDARDS: EN14126-2003, CE4-B, CE5-B, CE6-B

MEDICAL / INDUSTRIAL

 

ITEM 020

DISPOSABLE PROTECTIVE SHOE COVER (WITH ANTISLIP STRIP ON THE SOLE)

MODEL: ST-JT1S

MATERIAL: DUPONTTM TYVEK® 1422A FABRIC, 41G/M2

SIZES: 300mm IN HEIGHT X 420mm IN SOLE LENGTH

 

FEATURES:

1.ANTISLIP DESIGN ON THE SOLE

2.SHOE COVER ARE COMPOSED OF FLASH SPUN HIGH DENSITY POLYETHYLENE, PROVIDING AN IDEAL BALANCE OF PROTECTION, DURABILITY AND COMFORT

3.BREATHABLE, LIGHTWEIGHT AND FLEXIBLE MATERIAL FOR EXCEPTIONAL WEARER COMFORT

4.SHOE COVER IS PERMEABLE TO BOTH AIR AND WATER VAPOUR, YET REPELS WATER-BASED LIQUIDS AND AEROSOLS. IT OFFERS AN EXCELLENT BARRIER AGAINST FINE PARTICLES AND FIBRES (DOWN TO 1 MICRON IN SIZE), IS ULTRA-LOW-LINTING. SILICON NON-ADDED

5.SHOE COVER WITH ELASTIC TOP

6.BLUE TAPED SEAMS FOR OPTIONAL PROTECTION AND GOOD VISIBILITY

7.ANTI-STATIC PROPERTIES8.PROTECTION AGAINST INFECTIOUS DISEASESCERTIFICATIONS: CHEMICAL PROTECTIVE CLOTHING, CATEGORY III, TYPE 4-B, 5-B AND 6-B, EN 14126 (PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS), ANTISTATIC TREATMENT (EN 1149-5) -ON BOTH SIDES

 

APPLICATION:

1.IT CAN PROVIDE BARRIER AND PROTECTION FOR MEDICAL STAFF TO DIRECTLY CONTACT WITH PATIENTS OR SUSPECTED PATIENTS.

2.MAINTENANCE AND DISMANTLING JOBS IN THE NUCLEAR INDUSTRY, PHARMACEUTICAL MANUFACTURING OR IN RESEARCH AND BIOSECURITY LABORATORIES, AS WELL AS IN MEDICAL APPLICATIONS AND WHEN EXPOSED TO BIOLOGICAL HAZARDS.

 

PACKAGE:

250 PAIRS / CTN

CARTON SIZE: 650 X 400 X 400mm

MOQ: 250 PAIRS / CARTON

STANDARDS: EN14126-2003, CE4-B, CE5-B, CE6-B

MEDICAL / INDUSTRIAL

 

ITEM 021

MEDICAL GOGGLES (AUTOCLAVAB LE, REUSABLE)

DESIGN: RETRO WIDE VIEWING ANGLE, AIRTIGHT ANTI-FOG LIQUID SPLASH AND LEAKAGE, VENTILATION DESIGN, SUITABLE FOR MOST CORRECTIVE GLASSES, ULTRA-LIGHT WEIGHT, COMFORTABLE TO WEAR FOR A LONG TIME WITHOUT STRIAE, CAN WITHSTAND HIGH TEMPERATURE STERILIZATION IN HOSPITAL 121 °C / 30MIN / REUSABLE 15 TIMES, CAN MAINTAIN STRONG ANTI-FOG AFTER STERILIZATION (KN GRADE) LENS: MEDICAL GRADE POLYCARBONATE -IMPACT RESISTANT, STRONG ANTI-FOG (KN GRADE) COVER BODY: MEDICAL GRADE HIGH TEMPERATURE TPR -SUPER COMFORTABLE, LONG-TERM WEAR WITHOUT MARKS, HIGH NOSE BRIDGE SEAL, VENTILATION DESIGN, AND BLOCK PARTICLES OF 0.5μM DIAMETER, SUITABLE FOR MOST CORRECTIVE GLASSES.

HEADBAND: 24mm MEDICAL SILICONE -THREE-STAGE ADJUSTABLE

NET WEIGHT: 101.8

EXECUTIVE STANDARD: CE: EN166: 2001; ANSI Z87.1: 2005

 

PACKAGE:

WEIGHT: 102G (1 PAIR+PRODUCT SPECIFICATION)

BOX SIZE: 195X 75X 90mm

CARTON SIZE: 660 X 460 X 420mm

PACKAGE: 1 PAIR / BAG, 10 PAIRS / BOX, 12 BOXES / CARTON

MOQ: 10 PAIRS / BOX

STANDARDS: CE, EN166

MEDICAL / INDUSTRIAL

 

ITEM 022

GOGGLES

FUNCTION: ANTI UV 99%, ANTI ENERGY IMPACT, OPTICAL CLASS 1 OF TRANSMITTANCE ANTI DROPLETS AND SPLASHES OF LIQUIDS, ANTI MOLTEN METALS ANDHOT SOLIDS, ANTI FOG

DESIGN: CLASSIC UNIVERSAL STYLE, VENTILATION VALVE DESIGN -REDUCE THE NEGATIVE PRESSURE FEELING OF WEARING FOR A LONG TIME, ELASTIC BELT PULL CARD DESIGN -CONVENIENT FOR THE WEARER TO TIGHTEN

STANDARD: GB 14866, EN 166 ANSI Z87.1CERTIFICATION: CE: EN 166 (3 4 9 B)

 

APPLICATION:

MANUFACTURE, LABORATORY, MEDICAL PLACE

PACKAGE: WEIGHT: 102G (1 PAIR+PRODUCT SPECIFICATION)

BOX SIZE: 195X 75X 90mm

CARTON SIZE: 660 X 460 X 420mm

 

PACKAGE:

1 PAIR / BAG, 10 PAIRS / BOX, 10 BOXES / CARTON

MOQ: 10 PAIRS / BOX

STANDARDS: GB14866, EN 166 Z87.1

INDUSTRIAL

 

ITEM 023

GOGGLES

COVER BODY:

1.IMPORTED MODIFIED PVC -OUTSTANDING CHEMICAL RESISTANCE, BLUE-TINT-PANORAMIC VIEW

2.BEVELED MICROPORE DISTRIBUTION AERODYNAMIC DISTRIBUTION -LONG-TERM WEAR WILL NOT BE UNCOMFORTABLE DUE TO NEGATIVE PRESSURE
3.DEEP SPACE -YOU CAN WEAR IT FREELY WHEN WEARING GLASSES

 

LENS:

1.IMPORTED MODIFIED POLYCARBONATE -NATURAL EXCELLENT ALL-WEATHER IMPACT RESISTANCE, WHILE EXCEEDING THE HIGHEST LEVEL OF LIGHT TRANSMITTANCE STANDARD, CLOSE TO THE THEORETICAL TRANSMITTANCE LIMIT OF THE MATERIAL ITSELF

2.ANTI-FOG COATING PROCESS (AF) -NO INFLUENCE OF WATER VAPOR

3.UV PROTECTION 99% -AVOID LONG-TERM DAMAGE TO THE EYE BY UV RAYS HEADBAND: ONE-PIECE COVER BODY -HIGH STRENGTH AND LONG SERVICE LIFE; EASY TO PULL AND LOOSEN ACCORDING TO THE HEAD CIRCUMFERENCE AFTER WEARING; COTTON-LIKE MATERIAL -COMFORTABLE SWEAT ABSORPTION

 

APPLICATION: WORKING ENVIRONMENT WITH THE RISK OF CHEMICAL LIQUID, ULTRAVIOLET, FOREIGN OBJECT IMPACT, ALTITUDE WIND AND SAND, FOG (ANTI-CHEMICAL CORROSION, LIQUID SPLASHING ANTI-UV ULTRAVIOLET ANTI-FOG ANTI-IMPACT)

EXECUTIVE STANDARDS: EN 166 (1 FT); EN 170 (2C-1.2); ANSI Z87.1; GB 14866PRODUCT CERTIFICATION: CE

 

PACKAGE:

WEIGHT: 109G (1 PAIR+PRODUCT SPECIFICATION)BOX SIZE: 195X 75X 90mm

CARTON SIZE: 660 X 460 X 420mm

PACKAGE: 10 PAIRS / BOX, 12 BOXES / CARTON

MOQ: 10 PAIRS / BOXEN 166 (1 FT); EN 170 (2C-1.2); ANSI Z87.1; GB 14866

INDUSTRIAL

 

ITEM 024

MEDICAL SAFETY GOGGLES

BODY: CLASSIC UNIVERSAL TYPE, MEDICAL GRADE SILICA GEL -EXCELLENT ANTI SKIN ALLERGY, LONG-TIME WEAR COMFORT, EXCELLENT LIQ/ GAS TIGHTNESS, AND CAN ADAPT TO CORRECTIVE GLASSES

LENS: MODIFIED POLYCARBONATE PC -EXCELLENT IMPACT RESISTANCE AND DOUBLE-SIDED ANTI FOG COATING

STANDARD: GB32166.1-2016, EN 61000

CERTIFICATION: CE: EN61000

 

PACKAGE: OUTER SIZE: 810 X 352X 428mm

1UNIT/BAG 10 BAGS/BOX

20BOXES/CTN GW: 15KGS

MOQ: 10 PAIRS / BOX

STANDARD: GB32166.1-2016

CERTIFICATION: CE: EN166

MEDICAL STAFF, CLEAN ROOM

 

ITEM 025

MEDICAL SAFETY GOGGLES

BODY:CLASSIC UNIVERSAL TYPE, MEDICAL GRADE SILICA GEL -EXCELLENT ANTI SKIN ALLERGY, LONG-TIME WEAR COMFORT, VENTILATION VALVE DESIGN -REDUCE NEGATIVE PRESSURE FEELING FOR A LONG TIME, AND CAN ADAPT TO CORRECTIVE GLASSES

LENS: MODIFIED POLYCARBONATE PC -EXCELLENT IMPACT RESISTANCE AND DOUBLE-SIDED ANTI FOG COATING

STANDARD: GB32166.1-2016, EN 61000

CERTIFICATION: CE: EN61000

 

PACKAGE: CARTON SIZE: 810 X 352X 428mm

1UNIT/BAG 10 BAGS/BOX

20BOXES/CTN GW: 15KGS

MOQ: 10 PAIRS / BOX

STANDARD: GB32166.1-2016

CERTIFICATION: CE: EN166

MEDICAL STAFF, CLEAN ROOM

 

ITEM 026

DISPOSABLE MEDICAL FACE SHIELD (NON STERILE)

FEATURES: PREVENT THE RISK OF CROSS INFECTION DUE TO SPLASHING OF LIQUID INFECTION SOURCES SUCH AS SALIVA/BLOOD. HIGH TRANSMITTANCE FILTER MATERIAL -MINIMIZE COLOR DIFFERENCE AND EYE DISCOMFORT, LIGHT AND FLEXIBLE -SUITABLE FOR LONG TIME WEARING WITHOUT WEIGHT BEARING. AND WILL NOT EASILY OCCUR BENDING AND FRACTURE PHENOMENON. SOFT AND CUSHIONED FOREHEAD AND ELASTIC BAND MAKE IT EASY TO WEAR, LIGHT AND COMFORTABLE WITHOUT ANY LIGATURE MARKS. ANTI FOG-AVOID WATER VAPOR ACCUMULATION ON THE SHIELD, WHICH MAY AFFECT THE VISUAL OBSERVATION. SURFACE COATING-TO AVOID SCRATCHES AFFECTING THE LIGHT TRANSMITTANCE AND DURABILITY OF THE SHIELD. FUNCTION: PREVENT LIQUID SPLASHING AND ANTI-FOG.

 

APPLICATION: WORKING ENVIRONMENT WITH RISK OF CROSS INFECTION CAUSED BY SPLASHING OF SALIVA / BLOOD AND OTHER LIQUID INFECTION SOURCES, SUCH AS HOSPITAL, POLICE STATION, CHECKPOINT, JAIL, ETC.

SPECIFICATION: 3200 X 2200 X 2mm

MEAS: 690mm X 390 X 400mm/8.4KGS1 UNIT/SMALL BAG 10 SMALL BAG / MEDIUM BAG, 20 MEDIUM BAG /CTN

 

PACKAGE: CARTON SIZE: 480 X 330 X 380mm

1UNIT/BAG 10 SMALL-BAGS/MIDDLE BAGS 20 MIDDLE BAGS/CTN (200PCS/CARTON)

GW: 15KGS

STANDARDS: CE: EN166

MEDICAL / INDUSTRIAL

 

ITEM 027

SAFETY GLASSES

LENS: CLEAR, OPTICAL 1 CLASS, FT IMPACT RESISTANCE; ANTI-UV99%, ANTI-FOG

DESIGN: CLASSIC STYLE, COMMON 3D FACIAL, SOFT SILICONE NOSE PADS, ADJUSTABLE LEG

CONFORM: BS EN 166/ANSI Z87.1/GB14866

PACKAGE: 1 PAIR / BAG, 300BAGS / CARTON

INDUSTRIAL

 

ITEM 028

SAFETY GLASSES

LENS: CLEAR, OPTICAL 1 CLASS, FT IMPACT RESISTANCE; ANTI-UV99%, ANTI-FOGDESIGN: STREAMLINE STYLE, COMMON 3D FACIAL, (OPTIONALLY EXCLUSIVE HEADBAND)

CONFORM: BS EN 166/ANSI Z87.1/GB14866

EXCLUSIVE PRIMOP-100 (CG5118100) HEADBANDPURE COTTON REPLACE LEG, 360°EXTREME OPERATING FOCUS ON THE FRONT

PACKAGE: 1 PAIR / BAG, 300BAGS / CARTON

INDUSTRIAL

 

ITEM 029

SAFETY GLASSES

LENS: CLEAR, OPTICAL 1 CLASS, FT IMPACT RESISTANCE; ANTI-UV99%, ANTI-FOG

DESIGN: CLASSIC STYLE, COMMON 3D FACIAL, SOFT SILICONE NOSE PADS, ADJUSTABLE LEG

CONFORM: BS EN 166/ANSI Z87.1/GB14866

PACKAGE: 1 PAIR / BAG, 300BAGS / CARTON

INDUSTRIAL

 

ITEM 030

DISPOSABLE MEDICAL NITRILE INSPECTION GLOVES (POWER-FREE)

SPECIFICATIONS: SKY BLUE, NITRILE MATERIAL, POWDER-FREE, NON STERILE, FOR DISPOSABLE MEDICAL EXAMINATION, UNIVERSAL FOR LEFT AND RIGHT HAND.

WATER IMPERVIOUS: G-1 /AQL 1.5

UNIT WEIGHT: 4.6G (SIZE M) LENGTH: 240mm

SIZE: S / M / LSHELF LIFE: 3 YEARS

STANDARD: GB10213-2006 "DISPOSABLE RUBBER INSPECTION GLOVES"

CERTIFICATION: ISO13485 MEDICAL DEVICE MANUFACTURER SYSTEM CERTIFICATION US FDA 510 (K)

SHIPPING: 20GP: 1380 CTN, 40GP: 2860 CTN, 40HQ: 3220 CTN

PACKAGE: 100 PCS / BOX, 10 BOXES / CARTON, 5.4 KG/ CARTON (SIZE S), 5.8 KG / CARTON (SIZE M) 6.3 KG / CARTON (SIZE L).

OUTER CARTON SIZE 340X250X250 mm

COLOR BOX SIZE 240X120X65 mm

MOQ: 500 PAIRS / CARTON

MEDICAL / INDUSTRIAL

 

ITEM 031

DISPOSABLE MEDICAL LATEX INSPECTION GLOVES (POWER-FREE)

SPECIFICATIONS: WHITE, NATURAL LATEX MATERIAL, POWDER-FREE, NON-STERILE, FOR DISPOSABLE MEDICAL EXAMINATION, UNIVERSAL FOR LEFT AND RIGHT HANDS

WATER-IMPERMEABLE: G-1 / AQL 1.5

SINGLE WEIGHT: 6.0G (SIZE M), LENGTH: 240mm

SIZE: S / M / L

SHELF LIFE: 3 YEARS

STANDARD: GB10213-2006 "DISPOSABLE RUBBER INSPECTION GLOVES"

CERTIFICATION: ISO13485 MEDICAL DEVICE MANUFACTURER SYSTEM CERTIFICATION US FDA 510 (K)

SHIPPING: 20GP: 1310 CTN, 40GP: 2727 CTN, 40HQ: 3015 CTN

PACKAGE: 100 PCS / BOX, 10 BOXES / CARTON 6.6 KG / CARTON (S) 7.1 KG / CARTON (M) 7.7 KG / CARTON (L)

OUTER CARTON SIZE: 365X250X245 mm

COLOR BOX SIZE 235X120X70 mm

MOQ: 500 PAIRS / CARTON

MEDICAL / INDUSTRIAL

 

ITEM 032

INFRARED THERMOMETER

MODEL: FJDT802

POWER SUPPLY: 9V

MEASURING RANGE: BODY MODE 32°C-42°C

MEASURING ACCURACY: INFRARED BODY 0.1-0.3°C, SURFACE±1.5%

MEASURING DISTANCE: INFRARED 3-50mm, SUFACEDISTANCE COEFFICIENT RADIO 12: 1

RESPONSE TIME: 0.8 SECOND

AUTO POWER-OFF: ≤ 15SECONDS RECORD DATA 32GROUPS

FEVER ALARM DIDI ALARM WHEN FEVER

TRANSPORTATION STORAGE: AMBIENT TEMPERATURE -20~55°C, RELATIVE HUMIDITH≤ 93%

WORKING ENVIRONMENT: AMBIENT TEMPERATURE 16~35°C, RELATIVE HUMIDITH≤ 85

 

FEATURES:

SIMPLE ONE-HANDED OPERATION

LASER TARGETING

LCD WITH BACK LIGHT°C/°F SELECT SWITCH

LASER ON/OFF SWITCH

AUTOMATIC POWER OFF

DISPLIAY HOLD FUNCTION

MEASURING: 50mm-150mm(2IN-5.9IN)

THE OPERATOR CAN BRING THIS INSTRUMENT AROUND WORK WITH CARRYING CASE WHICH CAN BE FIT ON THE BELT.

LED BACK LIGHT SYSTEM FOR OPERATION UNDER POOR LIIUMINATION.

 

PACKAGE: 40 PCS/CARTON

WEIGHT: 8.4KG

OUTER CARTON SIZE: 410 X 330 X 440mm
STANDARDS: CE

MEDICAL / INDUSTRIAL

 

ITEM 033

INFRARED THERMOMETER

OPERATING VOLTAGE: DC 3V

BATTERY MODEL: AAA X 2

BATTERY LIFE: ALKALINE DRY BATTERY FOR AROUND 20, 000 MEASUREMENTS

MEASURE TIME: ABOUT1~2 SECOND

MEASURING RANGE: FOREHEAD MODE: 32.0°C-42.9°C (89.6°F-109.2°F)

OBJECT MODE: 0.0°C-93.0°C (32.0°F-199.4°F)

ACCURACY(LABORATORY): ±0.2°C (±0.4°F)

MEMORY: 20 TEMPERATURE READINGS

LOW-BATTERY ALERT: THE LOW-BATTERY SYMBOL IS DISPLAYED IF THE POWERVOLTAGE IS LOWER THAN 2.5 V±0.1V

AUTOMATIC POWER-OFF: THE THERMOMETER AUTOMATICALLY POWERS OFF IF IT IS NOTUSED IN 8±1 SECONDS

OUTER DIMENSIONS(mm): 140X40X40mm

WEIGHT (G): (WITHOUT BATTERIES): 68G

OPERATING ENVIRONMENT: TEMPERATURE: 16°C~ 35°C (60.8°F-95°F)

HUMIDITY: 15%-95% RH, NON-CONDENSING

ATMOSPHERIC PRESSURE: 86-106 KPA

PACKAGE: 100 PCS/CARTON

PRODUCT PACKAGE SIZE: 1720 X650 X46mm

OUTER CARTON SIZE: 4900 X4000 X350mm

GROSS WEIGHT: 13KG

MEDICAL

 

ITEM 034

DISPOSABLE PPROTECTIVE MASK

MADEOF WHITE THREE-LAYER NON-WOVEN FABRIC.

STANDARD: T / CTCA 7-2019 "GENERAL PROTECTIVE MASK"

APPLICATION: SUITABLE FOR THE PROTECTION IN DAILY LIFE TO FILTER OUT POLLEN, BACTERIAL PARTICLES AND BLOCK OUT NASAL OR ORAL EXHALATION OR SPRAY POLLUTANT FACE MASK.

PACKAGE: 50 PCS / BAG, 60 PACKS / CARTON

CARTON SIZE: 700 X400 X400mm

WEIGHT: 12KG

STANDARDS: T/CTCA 72019

INDUSTRIAL

 

ITEM 035

DISPOSABLE PPROTECTIVE MASK

SIZE: 175 X 95mm

STANDARD: Q / AKKZ-001-2020

DISPOSABLE INDUSTRIAL MASK, TWO LAYERS OF NON-WOVENFABRIC, MIDDLE MELT-BLOWN FABRIC

APPLICATON: NON-MEDICAL, NEW INDUSTRIAL DISPOSABLE PROTECTIVE MASK FOR COVID-19

VALIDITY PERIOD: 1 YEAR

 

PACKAGE: 2000 PCS / CARTON

CARTOON SIZE: 530 X380 X340mm

WEIGHT: 10KG

STANDARDS: T/CTCA 72019 Q/AKKZ-001-2020

INDUSTRIAL

 

ITEM 036

DISPOSABLE THREE-DIMENSIONAL PROTECTIVE MASK (SIZE M)

NON WOVEN THREE-LAYER MASK

SIZE: 145mmX 90mm

MATERIAL: PP NON-WOVEN (SPUNBOND), MELT-BLOWN CLOTH FILTER LAYER

FEATURES: THREE LAYERS OF PROTECTION, MOISTURE-PROOFNON-WOVEN FABRIC ON THE OUTER LAYER, MELT-BLOWN FABRIC ON THE MIDDLE LAYER AND SKIN FRIENDLY NON-WOVEN FABRIC ON THE INNER LAYER; IT WAS EXPORTED TO JAPANESE PHARMACEUTICAL STORES.

 

APPLICATION: CHILDREN AND PEOPLE WITH SMALL FACE

 

PACKAGE: 50 PCS / BOX, 2000PCS / BOX

SIZE: 530mmX 380mmX 430mm

WEIGHT: 7.6KG

STANDARDS: CE GB/T32610-2016

INDUSTRIAL

 

ITEM 037

DISPOSABLE THREE-DIMENSIONA L PROTECTIVE MASK (SIZE L)

NON WOVEN THREE-LAYER MASK

SIZE: 175mmX 90mm

MATERIAL: PP NON-WOVEN (SPUNBOND), MELT BLOWN CLOTH FILTER LAYER

FEATURES: THREE LAYERS OF PROTECTION, MOISTURE-PROOF NON-WOVEN FABRIC ON THE OUTER LAYER, MELT-BLOWN FABRIC ON THE MIDDLE LAYER AND SKIN FRIENDLY NON-WOVEN FABRIC ON THE INNER LAYER; IT WAS EXPORTED TO JAPANESE PHARMACEUTICAL STORES.

 

APPLICATION: ADULTS

 

PACKAGE: 50 PCS / BOX, 2000PCS / BOX SIZE: 530mmX 440mmX 430mm

WEIGHT: 8KG

STANDARDS: CE GB/T32610-2016

INDUSTRIAL

 

ITEM 038

KN95 PROTECTIVE MASK

MATERIAL: PP NON-WOVEN FABRIC, FILTER MATERIAL, EAR BAND, NOSE BRIDGE

FEATURES: FIVE LAYERS OF PROTECTION PROVIDES HIGH EFFICIENCY FILTERING; ADJUSTABLE NOSE BRIDGE TOFIT THE FACE; WIDENED ELASTIC COTTON ROPE, WHICH CAN BE EASILY PULLED WITHOUT TENSION.

 

APPLICATION: ADULTS

 

PACKAGE: 50PCS / BOX, 2000PCS / CARTON

CARTON SIZE: 600 X 600 X 570mm

WEIGHT: 17KGMOQ:2,000PCS/CTN

STANDARDS: CE GB2626-2006 FDA

INDUSTRIAL

 

ITEM 039

N95 PROTECTIVE MASK

N95 GB19083-2010

PACKAGE: 1PC / BAG, 350 PCS / CARTON

CARTON SIZE: 520 X 480 X 300mm

WEIGHT: 7KG

MOQ: 500,000PCS

STANDARDS: CE GB19083-2010

MEDICAL / INDUSTRIAL

Learn More

PP CHIPS FOR MELTBLOWN: 1200 TO 2000
FABRIC WIDTH: 1600mm
2 SPINNING BEAMS FOR SPUNBOND & 1 FOR MELTBLOWN
BASIC WEIGHT: SMS 9 TO 80 GRAMS PER SQUARE METER
SS: 15 TO 100 GRAMS PER SQUARE METER

PRODUCT:
SMS LAMINATED NONWOVEN FABRIC
SS SPUNBOND NONWOVEN FABRIC SS
M MELTBLOWN NONWOVEN FABRIC M

TO MAKE HYGENIC FABRICS SUCH AS BABY DIAPERS, SANITARY NAPKINS, ADULT DIAPERS, MEDICAL OPERATION SUITS, OPERATION CAPS, OPERATIONS SHOES, MASKS, ETC.

CONSISTING OF:

3 X FEEDING SYSTEMS
AUTOMATIC VACUUM SUCTION FOR BOTH MAIN MATERIAL AND ADDITIVES
CAPACITY (SB + MB) 2 X 520 KGS/H, (SB) 2 X 200 KGS/HR
WITH THREE HOPPERS, THREE SUPPLIYING DEVICES

SPUNBOND SYSTEM
2 X EXTRUDERS
DIAMETER: 150mm
CAPACITY: 450 KGS/HR
L/D 30:1
DRIVE POWER: 110 KW
HEATING POWER: 90 KW

2 X RECYCLING SYSTEMS
DIAMETER: 105mm
CAPACITY: 100 KGS PER HOUR
L/D: 15:1

2 X MELT FILTERS
WORKING TEMPERATURE: UP TO 280 CELSIUS
FILTRATION CAPACITY: 520 KGS PER HOUR

2 X METERING PUMPS
TYPE: GEAR PUMP
FLOW VOLUME: 250 ML/R
DESIGNING TEMPERATURE: 280 CELSIUS

2 X MELT PIPELINES
WITH STATIC MIXER

2 X MONOMER EXHAUSTER
INCLUDING BLOWER, CHILLER, PIPELINE, VALVE, INSULATION, ETC

2 X SPINNING BEAMS
SINGLE COAT-HANGER MELT DISTRIBUTION
DESIGNING PRESSURE: 9MPA
WORKING TEMPERATURE: MAX 280 CELSIUS

4 X SPINNERETS
HOLE DIAMETER: 0.45mm
L/D: 5:1
15,500 HOLES

MELTBLOWN SYSTEM

1 X EXTRUDER
DIAMETER 120mm
CAPACITY: 280 KGS/HR
L/D: 30:1
DRIVE POWER: 75 KW
HEATING POWER: 80 KW

1 X MELT FILTER
FILTRATION PRECISION: 20 TO 60 MICROMETERS
FILTRATION: 280 KGS PER HOUR

1 X METERING PUMP
GEAR PUMP
MAX. FLOW VOLUME: 100ML/R
DESIGNED TEMPERATURE: 300 CELSIUS

1 X MELT PIPELINE
WITH STATIC MIXER

1 X SPINNING BEAM
INCLUDING STRETCHING CHANNEL, NOZZLE, ETC. WITH INSULATION MATERIAL
DESIGNED PRESSURE: 6 MPA

2 X SPINNING DIE PACKS
COMPACT DIE PACKS
HOLE DIAMETER: 0.35mm
L/D: 12:1
# OF HOLES: 42HPI

1 X SCREW BLOWER
INCLUDING MUFFLE, PRESSURE REDUCER VALVE, PIPELINE, ETC.
POWER: 200 KW

1 X HOT AIR SYSTEM
FLOW VOLUME: 6000 CUBIC METERS PER HOUR
WORKING TEMP: MAX 350 CELSIUS
INCLUDING HEATER, STAINLESS STEEL PIPELINE, ETC.
POWER: 290 KW

1 X OFF-LINE CONVEYOR
RANGE OF SPEED: 5 TO 100 METERS PER MINUTE

1 X CONVEYOR
MECHANICAL SPEED: MAX 400 METERS PER MINUTE
BELT WIDTH AND PENETRATION
3800±10mm, 10000 CUBIC METERS PER H.M2

1 X CALENDAR
DOUBLE ROLLS HEATED BY OIL
PROCESS SPEED: 350 METERS PER MINUTE
EMBOSSING WIDTH: UP TO 2000mm
MAX LINEAR PRESSURE: 110 DAN/C
MAX. TEMP OF EMBOSSING ROLLER, 180 CELSIUS

1 X WINDER
ONLINE CHANGING ROLL, ONLINE EDGE CUTTING, TENSION CONTROL
MAX. LINEAR SPEED: 350 METERS PER MINUTE
WIDTH: 1600mm
WIND DIAMETER: MAX 1500mm

1 X SLITTER
MAX. LINE SPEED: 600 METERS PER MINUTE
MAX. WIND DIAMETER: 1200mm
MIN. SLITTING WIDE: 120mm
22 CIRCULAR BLADES

1 X STEEL PLATFORM

1 X ELECTRICAL CONTROL SYSTEM

2 X OIL OVEN

1 X AIR CONDITIONING SYSTEM

1 X WATER COOLING SYSTEM

1 X CLEANING EQUIPMENTS FOR DIE PACK

1 X AUXILIARY PLATFORM

1 X AUXILIARY EQUIPMENTS

1 X LABORATORY TESTING DEVICE

Learn More

T-7934 MEDICAL SURGICAL LATEX GLOVES INNER PACKING MACHINE A. IT IS MAINLY USED FOR LATEX GLOVE INSIDE PACKING, GLOVE LENGTH FROM 175 TO 190mm CAN BE ADJUSTED, WIDTH FROM 90 TO 110MM CAN BE ADJUSTED, B. SPEED: 20 TO 28 PCS/MIN C. VOLTAGE: 380V, WORKING AIR PRESSURE: 0.6 TO 1.0MP D. TOTAL POWER: 4KW Learn More

YY-1140 RESPIRATORY RESISTANCE TESTER, FLOWMETER RANGE 0 L/MIN~100L/MIN, FLOWMETER RANGE ACCURACY ±2% DETAILS: THE RESPIRATORY RESISTANCE TESTER IS SUITABLE FOR DETERMINING THE INHALATION RESISTANCE AND EXHALATION RESISTANCE OF RESPIRATORS AND MASK PROTECTIVE PRODUCTS UNDER SPECIFIED CONDITIONS, AND FOR THE RELATED TESTING AND INSPECTION OF COMMON MASK PRODUCTS BY MANUFACTURERS OF NATIONAL LABOR PROTECTION ARTICLE INSPECTION AGENCIES. STANDARD: GB2626-2006,GB/T32610-2016. Learn More

REFERENCE NUMBER: T-6544

SYNTHETIC BLOOD PENETRATION TESTER FOR SURGICAL MASK

 

TECHNICAL INDICATORS:

1. THE PROTRUDING SAMPLE FIXING DEVICE CAN SIMULATE THE ACTUAL USE STATE OF THE MASK, SET ASIDE THE TEST TARGET AREA WITHOUT DESTROYING THE SAMPLE, AND DISTRIBUTE THE SYNTHETIC BLOOD IN THE TARGET AREA OF THE SAMPLE.

2. THE SPECIAL FIXED-PRESSURE INJECTION DEVICE CAN EJECT A CERTAIN VOLUME OF SYNTHETIC BLOOD IN A CONTROLLED TIME.

3. IT CAN FULLY SIMULATE THE INJECTION SPEED CORRESPONDING TO THE AVERAGE BLOOD PRESSURE OF HUMAN BODY OF 10.6KPA, 16KPA AND 21.3KPA.

4. A FIXED TARGET PLATE IS SET TO BLOCK THE HIGH-PRESSURE EDGE PART OF THE INJECTED LIQUID FLOW AND ONLY ALLOW THE STEADY FLOW PART TO BE SPRAYED ON THE SAMPLE, WHICH INCREASES THE ACCURACY AND REPEATABILITY OF THE LIQUID VELOCITY SPRAYED ON THE SAMPLE.

 

STANDARDS:

MEDICAL RESPIRATOR TECHNICAL REQUIREMENTS, 5.5 SYNTHETIC BLOOD PENETRATION BARRIER PERFORMANCE

YY/T 0691-2008 INFECTIOUS PATHOGEN PROTECTION EQUIPMENT MEDICAL MASK RESISTANCE TO SYNTHETIC BLOOD PENETRABILITY TEST METHOD (FIXED VOLUME, HORIZONTAL INJECTION)

YY 0469-2011 MEDICAL SURGICAL MASK TECHNOLOGY REQUIRES A BLOOD PENETRATION TEST DEVICE

ISO 22609:2004 INFECTIOUS PATHOGEN PROTECTION EQUIPMENT MEDICAL MASK TEST METHOD FOR RESISTANCE TO SYNTHETIC BLOOD PENETRATION (FIXED VOLUME, HORIZONTAL INJECTION)

ASTM F1862-07 STANDARD TEST METHOD FOR RESISTANCE OF MEDICAL FACE MASKS TO BLOT BY SYNTHETIC BLOOD (HORIZONTAL PROJECTION OF FIXED VOLUME AT A KNOW VELOCITY)

 

TECHNICAL PARAMETERS:

1. INJECTION DISTANCE: 300mm ~ 305mm ADJUSTABLE

2. NOZZLE DIAMETER: 0.84mm

3. INJECTION SPEED: 450CM/S, 550CM/S, 635CM/S

4. WEIGHT: 35KG

5. POWER SOURCE: AC220V 50HZ

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: T-6545

MASK BACTERIAL FILTRATION EFFICIENCY (BFE) DETECTOR TESTER

 

PRODUCT INTRODUCTION:

MASK BACTERIA FILTRATION EFFICIENCY KEY PERFORMANCE INDICATORS (BFE) DETECTOR TESTER NOT ONLY CONFORMS TO THE REQUIREMENTS OF MEDICAL SURGICAL MASKS TECHNOLOGY YY0469-2011 APPENDIX B IN THE TEST METHOD FOR FILTER EFFICIENCY (BFE) BACTERIA FIRST B. 1.1.1 TEST INSTRUMENT, BUT ALSO CONFORMS TO THE AMERICAN SOCIETY FOR TESTING MATERIAL ASTMF2100, ASTMF2101, THE REQUIREMENTS OF THE EUROPEAN EN14683 STANDARDS, INNOVATIVE IMPROVEMENTS WERE MADE ON THE BASIS OF THIS, WITH DOUBLE PNEUMATIC CONTRAST SAMPLING METHOD AT THE SAME TIME, IMPROVE THE PRECISION OF SAMPLING,IT IS SUITABLE FOR MEASURING AND TESTING DEPARTMENTS, SCIENTIFIC RESEARCH INSTITUTES, MASK MANUFACTURERS AND OTHER RELEVANT DEPARTMENTS TO TEST THE PERFORMANCE OF MASK BACTERIAL FILTRATION EFFICIENCY.

 

EXECUTION STANDARD:

Q/0212 ZRB003-2015 MEDICAL SURGICAL MASK

BACTERIAL FILTRATION EFFICIENCY (BFE) DETECTOR RELATED INTELLECTUAL PROPERTY:

NO.: ZL200820224142.6 ELECTRIC FLOW CONTROL VALVE

NO.: ZL200820224143.0 GAS CAPACITY

NO.: ZL200920308391.8 AIR FILTRATIONMATERIAL FILTRATION EFFICIENCY DETECTOR

 

PRODUCT FEATURES:

NEGATIVE PRESSURE TEST SYSTEM TO ENSURE THE SAFETY OF OPERATORS;

BUILT -IN PERISTALTIC PUMP IN NEGATIVE PRESSURE CABINET, A, B TWO -WAY, SIX ANDERSEN; THE PERISTALTIC PUMP FLOW CAN BE SET;

THE FLOW RATE OF NIGHT SPRAY CAN BE SET AND THE ATOMIZATION EFFECT IS GOOD.

EMBEDDED HIGH SPEED INDUSTRIAL MICROCOMPUTER CONTROL; 10.4 INCHES INDUSTRIAL HIGH BRIGHTNESS COLOR TOUCH SCREEN;

USB INTERFACE, SUPPORT U DISK DATA STORAGE;

CABINET BUILT-IN HIGH BRIGHTNESS LIGHTS; BUILT-IN LEAKAGE PROTECTION SWITCH TO PROTECT THE SAFETY OF OPERATORS;

THE INNER LAYER OF THE CABINET IS MADE OF STAINLESS STEEL, THE OUTER LAYER IS SPRAYED WITH PLASTIC AND COLD-ROLLED, AND THE INNER AND OUTER LAYERS ARE INSULATED AND FLAME RETARDANT.

THE FRONT SWITCH TYPE GLASS DOOR IS CONVENIENT FOR THE EXPERIMENTER TO OBSERVE AND OPERATE.

DETACHABLE BRACKET, ADJUSTABLE BRACKET HEIGHT; SUPPORTING AND MOVING DUAL PURPOSE CASTERS.

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: T-6547

RESPIRATOR RESISTANCE TESTER FOR FACE MASKS

 

INTRODUCTION

THE RESPIRATOR RESISTANCE TESTER IS USED TO MEASURE THE INSPIRATORY RESISTANCE AND EXPIRATORY RESISTANCE OF RESPIRATORS AND RESPIRATOR PROTECTORS UNDER SPECIFIED CONDITIONS. IT IS APPLICABLE TO THE NATIONAL LABOR PROTECTION EQUIPMENT INSPECTION INSTITUTIONS, MASK MANUFACTURERS FOR THE GENERAL MASKS, DUST MASKS, MEDICAL MASKS, ANTI-SMOG MASKS PRODUCTS OF THE RELEVANT TESTING AND INSPECTION.

 

STANDARD

GB 19083-2010 TECHNICAL REQUIREMENTS FOR MEDICAL PROTECTIVE MASKS

GB 2626-2006 RESPIRATOR SELF-SUCTION FILTER RESPIRATOR AGAINST PARTICULATE MATTER

GB/T 32610-2016 TECHNICAL SPECIFICATIONS FOR DAILY PROTECTIVE MASKS

 

FEATURES:

1. HIGH-DEFINITION LCD DISPLAY.

2. DIGITAL DIFFERENTIAL PRESSURE METER WITH HIGH PRECISION IMPORTED BRAND.

3. HIGH PRECISION IMPORTED BRAND OF DIGITAL FLOWMETER, WITH HIGH FLOW CONTROL ACCURACY FEATURES.

4. THE RESPIRATOR RESISTANCE TESTER CAN SET UP TWO MODES: EXHALATION DETECTION AND INHALATION DETECTION.

5. AUTOMATIC PIPELINE SWITCHING DEVICE OF RESPIRATOR SOLVES THE PROBLEM OF PIPE EXTUBATION AND WRONG CONNECTION WHEN TESTING.

 

PARAMETER:

1. FLOWMETER RANGE: 0 ~ 100L/MIN, ACCURACY IS 3%

2. DIGITAL PRESSURE DIFFERENCE METER RANGE: 0 ~ 2000PA, ACCURACY: 1PA

3. PUMPING CAPACITY OF AIR PUMP: >100L/MIN

4. OVERALL SIZE: 460 X 1080 X 670mm

5. POWER SOURCE: AC220V 50HZ 650W

6. WEIGHT: 55KG

 

QUANTITY: 1

Learn More

THE AUTOMATED FILTER TESTER MODEL 9981 CONTINUES TO BE THE BEST SOLUTION FOR TESTING PARTICULATE RESPIRATOR FILTERS, DISPOSABLE FILTERING FACE PIECES, AND A WIDE ASSORTMENT OF FILTER MEDIA. OUR FILTER TESTERS HAVE BEEN USED IN QUALITY CONTROL AND MANUFACTURING BY LEADING FILTER AND FILTER MEDIA MANUFACTURERS AND REFERENCE TEST INSTITUTES AROUND THE WORLD FOR MORE THAN 20 YEARS DUE TO THEIR PROVEN DURABILITY AND RELIABILITY, WHICH IS VALUED IN DEMANDING MANUFACTURING ENVIRONMENTS AND QA/QC LABORATORIES.

THIS MODEL OFFERS HIGHER SENSITIVITY AND RESOLUTION THAN PREVIOUS MODELS - UP TO 99.9999 PERCENT EFFICIENCY HAS BEEN PRODUCED WITH EMERY OIL AT CONCENTRATIONS OF 200 MG/M³. THE NEW SERVICEABLE PHOTOMETERS ARE LOWERING THE COST OF OWNERSHIP AND ENABLE PROACTIVE SCHEDULING OF MAINTENANCE FOR MINIMAL IMPACT TO PRODUCTION SCHEDULES.

THE MODEL 9981 FEATURES A HIGH DEGREE OF AUTOMATION AND SELF-DIAGNOSTICS THAT GREATLY SIMPLIFIES OPERATION, INCREASES THROUGHPUT, AND IMPROVES OVERALL MEASUREMENT PERFORMANCE. WHEN LOOKING FOR A STAND-ALONE TESTER TO DETERMINE PENETRATION OR FILTER EFFICIENCY AND PRESSURE DROP OF YOUR MEDIA, FILTER CARTRIDGES, FILTERS, AND RESPIRATORY MASKS THE MODEL 9981 IS UP TO THE CHALLENGE.

THE BUILT-IN CAPABILITY TO TEST WITH SALT AND OIL MEANS THAT JUST ONE UNIT IS NEEDED TO TEST YOUR PRODUCT TO:
• US 42 CFR 84, GB2626, JMOL
• ISO 16900-3, EN 143
• ISO 23328-1 (AND MORE)
APPLICATIONS
• USA COMMERCIAL RESPIRATOR REGULATION 42 CFR PART 84
• CHINESE RESPIRATOR STANDARD GB2626
• JAPANESE RESPIRATOR STANDARD JMOL
• EUROPEAN EN 143, ISO 16900-3 AND RELATED RESPIRATOR STANDARDS
• ISO 23328-1 (TESTING FILTERS FOR ANAESTHETIC USE)
• FILTER MEDIA TESTING
• CONSULT OUR REPRESENTATIVE FOR MORE DETAILS
INCLUDED ITEMS
• REFERENCE MEDIA SHEETS
• FLAT-MEDIA AND GRAVIMETRIC FILTER HOLDER
• REFERENCE PRESSURE DROP PLATE
• OIL AND SALT AEROSOL GENERATORS
• SELECTED SPARE PARTS
• CONTACT US FOR CUSTOM FILTER HOLDERS

EMAIL US FOR PRICE & PICTURES
INCLUDE OUR REFERENCE NUMBER

Learn More