Search results for: 'loom+width'

REFERENCE NUMBER: M-5301 (1313THWKXX12) L VAMATEX TERRY TOWEL WEAVING FACTORY YEAR 1995-2003 TERRY TOWEL FACTORY WEAVING DEPARTMENT VAMATEX 1151 ES 3600mm WORKING WIDTH, WITH DOBBY (3) X YEAR 1996 (1) X YEAR 2000 (2) X YEAR 1999 (2) X YEAR 1997 (2) X YEAR 1995 5 SETS WITH 16 HEALD FRAMES, 20 SHAFTS 5 SETS WITH 12 HEALD FRAMES, 16 SHAFTS FACTORY ONCE SELLS WHOLE WITH DOBBY LOT AS ABOVE THEN THEY WILL SELL LOOMS WITH JACQUARDS (6) X VAMATEX LEONARDO YEAR 2003 WITH JACQUARDS J5 STAUBLI 2688 JACQUARD WORKING WIDTH 2600mm (4) X VAMATEX LEONARDO YEAR 2003 WITH VRT SYSTEM/JACQUARD J5 STAUBLI 2688 JACQUARD WORKING WIDTH 2600mm (4) X VAMATEX LEONARDO YEAR 2003 WITH JUMBO JACQUARD J5 STAUBLI 6144 JACQUARD WORKING WIDTH 2600mm (2) X VAMATEX LEONARDO YEAR 2003 WITH GROSS JACQUARD 6144 JACQUARD WORKING WIDTH 2600mm TOTAL QUANTITY: 26 LOOMS Learn More

REFERENCE NUMBER: M-5102 (1212FPDWXX11) L NEGATIVE & POSITIVE RAPIER HERCULES WEAVING MACHINES WIDTH 5500mm – FOR HEAVY FABRICS NEGATIVE & POSITIVE RAPIER HERCULES H5500 WEAVING MACHINES 20 SHAFTS NOMINAL WIDTH 5500mm MAXIMUM REED WIDTH 5500mm MINIMUM REED WIDTH 4400mm STANDARD BASIC MACHINE FOR VOLTAGE 440 V AND FREQUENCY OF 60 HZ DIRECT DRIVE MOTOR, SPEED CONTROLLED BY MICROPROCESSOR WITHOUT CHANGE OF PULLEY, WITHOUT CLUTCH SYSTEM, WITH (15%-40%) ELECTRIC POWER SAVING DEPENDING FROM TYPE OF WOVEN FABRIC SHEDDING MACHINE: STAUBLI DOBBY MODEL 2668 20 RODS SHAFTS TYPE GROB HEALD FRAME WITH UNDER MOTION 20 LEVER DRC CASTLE ELECTRIC CABINET WITH MICROPROCESSOR, ELECTRONIC PICK FINDING, ELECTRONIC LET-OFF, ELECTRONIC TAKE-UP UNIT WITH INDEPENDENT MOTOR ELECTRONIC WEFT COLOUR SELECTOR IN EXECUTION FOR 8 COLORS TAKE-UP WITH ROLLER DIAMETER 219mm 6 TWIN BEAM DIAMETER 219mm WITH FLANGE 1000mm Q3 JUMBO BACK REST BAR FOR HERCULES WEFT DENSITY VARIABLE PROGRAMMABLE BY THE OPERATOR AT YOUR CHOICE HORIZONTAL CREEL 4 COLOURS AND SUPPORT FOR 8 CONE 4 WEFT FEEDERS ROJ CHRONO X3 3 WEFT BRAKES FOR EVERY CHRONO X3 (TOTAL 12 PCS) TO BE SELECT AS PER CUSTOMER WEFT YARN WEFT CONTROLLING UNIT ELTEX MODEL G3W. DEROULÈ LATERAL MINI CREELS SUPPORT FOR 24 CONES LATERAL MOTORIZED LENO SYSTEM HEATING SCISSOR-CUTTING LATERAL TEMPLES: TO BE DEFINED DEPENDING THE FABRIC CHARACTERISTIC 20 FRAMES GROB TYPE 331 C TYPE DRC S227 GROBTEX ALFIX-U 14.000 GROB HEALDS TYPE 8 X 3.8 TYPE GROZ AETEX SP 0.38 331 8.0X3.8 I CR (7000PCS PER PACK) 1 WARP STOP MOTION 6-30 GROB FKW LED 14.000 GROB DROP WIRE TYPE GROZ EOU 1405 180X11X0.50 ZN (2000PCS PER PACK) SETS OF NEGATIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) SETS OF POSITIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) POSITIVE RAPIER KIT (FULL COMPONENT) CENTRAL GEARBOX ALREADY INSTALLED AND COLOR SELECTOR ALREADY ASSEMBLED FOR POSITIVE VERSION APPLICATION (TO REDUCE TIME OF CONVERSION) SETS AND EQUIPMENT OF LOOM TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDING NR. 2 TORQUE TOOL EXTRA SPARE PARTS THE TOTAL MACHINE SUPPLY WILL ALSO INCLUDE 2 SETS OF NEGATIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF NEGATIVE TAPES (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE TAPES (LEFT AND RIGHT SIDE) 1 POSITIVE RAPIER KIT (FULL COMPONENT) 1 SET AND EQUIPMENT OF LOOM 1 TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDE 2 TORQUE TOOLS EXTRA SPARE PARTS 1500EUR/MACHINE WARRANTY: ONE YEAR FROM MACHINE ERECTION OR AFTER 3 MONTHS DELIVERY DATE QUANTITY: 1 Learn More

C-3914
VAMATEX SP1151ES TERRY, WORKING WIDTH 2600mm, YEAR 1996 TO 1997, JACQUARD, 8 COLORS
TERRY WEAVING LOOMS
MAKE: VAMATEX
MODEL: SP1151ES
(3) X YEAR 1997
(1) X YEAR 1996
QUANTITY: 4

Learn More

REFERENCE NUMBER: M-5167 (1212595FG11RC)
SULZER P7300 RR PROJECTILE WEAVING LOOMS

MAKE: SULZER
MODEL: P7300 RR
WORKING WIDTH : 390mm
YEAR: 2004

ACCESSORIES WITH ALL 6 LOOMS
BIG LOT OF SPARE PARTS INCLUDE MECHANICAL SPARES AND ELECTRICAL CARDS  

QUANTITY AVAILABLE: 6

Learn More

T-5978 DORNIER PTV/4S RAPIER WEAVING MACHINES, WIDTH 2100mm, YEAR 2001, DOBBY-REBUILT TO RUN POLYPROPYLENE MONOFILAMENT FABRIC · 20 NEW HARNESSES ADDED · ALL 20 UNDERCARRIAGES MOUNTED · DOBBIES COMPLETELY REBUILT · ALL NEW HEDDLES QUANTITY: 4 Learn More

REFERENCE NUMBER: T-6975 VAMATEX SILVER 501, WIDTH 3600mm, YEAR 2012, DOBBY VAMATEX SILVER 501 WIDTH 3600mm YEAR 2012 HAL WARP BEAMS DOBBY TYPE 2670 UP TO 20 LEVERS INSTALL 12 LEVERS 10 HEALDFRAME/LOOM 13” ROJ LUNA X 2 4 PVCS 2 WARP BEAMS / LOOM 1.5 PCS CLOTH ROLL /LOOMS 10,000 DROPPERS/HEDDLES 10 STK/WM QUANTITY: 8 Learn More

L-5094

TSUDAKOMA ZAX , WIDTH 2100mm, TERRY TOWEL WEAVING MACHINES, YEAR 1998

 

QUANTITY: 13

Learn More

M-5072 SULZER P7250 & P7200 PROJECTILE WEAVING MACHINES FOR TERRY, YEAR 1999 TO 2001

OFFER 001
SULZER P7250 F4 SPE D1
PROJECTILE WEAVING MACHINES FOR TERRY
YEAR: 2001
EQUIPPED FOR 2 WIDTH WEAVING FROM 2 HALF BEAMS OF WARP
AND 2 HALF BEAMS OF WEFT
EACH MACHINE HAS ONE FULL SET OF SPARE BEAMS (2 FOR WARP AND 2 FOR WEFT)
ALL MACHINES COMPLETE WITH 3 IRO EACH LOOM
ALL MACHINES ARE STILL RUNNING
AND IN EXCELLENT CONDITION

QUANTITY: 2

OFFERR 002
SULZER P7200 F4 SPED1
PROJECTILE WEAVING MACHINES FOR TERRY
YEAR: 1999
WIDTH: 3630mm
EQUIPPED FOR 2 WIDTH WEAVING FROM 2 HALF BEAMS OF WARP
AND 2 HALF BEAMS OF WEFT
EACH MACHINE HAS ONE FULL SET OF SPARE BEAMS (2 FOR WARP AND 2 FOR WEFT)
ALL MACHINES COMPLETE WITH 3 IRO EACH LOOM
ALL MACHINES ARE STILL RUNNING
AND IN EXCELLENT CONDITION

QUANTITY: 4

Learn More

TT-3556 JAKOB MULLER TYPE NF NARROW WEAVING LOOMS, YEAR 1992 TO 1998 JAKOB MULLER TYPE NF NARROW WEAVING LOOMS YEAR 1992 TO 1998 FOR PRODUCTION OF ELASTIC AND NON-ELASTIC TAPES OF MEDIUM WEIGHT WEAVING WIDTH: UP TO 27mm QUANTITY: 20 Learn More

REFERENCE NUMBER: M-3648 (88023FTB7RL) K
SULZER MODEL PU 130 YEAR 1990 WIDTH 3300mm - JACQUARD FOR TERRY
SULZER MODEL PU 130
JACQUARD FOR TERRY
YEAR 1990
WIDTH 3300mm
QUANTITY: 4

Learn More