Search results for: 'control+prog'

REFERENCE NUMBER: M-6042 (880699GY7RX) L
VACUUM PRESSING AND ROLLING UP MATTRESSES LINE

COMPLETE LINE FOR VACUUM PRESSING AND ROLLING UP MATTRESSES
PRODUCTION: 3 MATTRESSES PER MINUTE
CAN WORK: VISCO / POLYURETHANE / LATEX / BONNELL SPRING / POCKET SPRING / ETC.

QUANTITY: 1

Learn More

T-9895 FULLY AUTOMATIC MATTRESS (PET PAD) MAKING MACHINE, 120 TO 150 PIECES PER MINUTE TECHNICAL PARAMETERS FUNCTION: EMBOSSING, CUTTING, FOLDING OF PET PAD FOLDING METHOD: 1/3 IN THE WIDTH DIRECTION, 2 TIMES IN THE LENGTH DIRECTION RAW MATERIAL WIDTH: HYDROPHILIC CLOTH WIDTH ≦ 600mm (SLIGHTLY SMALLER THAN THE WIDTH OF THE CAST FILM) WATER ABSORPTION LAYER WIDTH = HYDROPHILIC CLOTH WIDTH: 50 TO 60mm CAST FILM WIDTH ≦ 600mm PRODUCT UNFOLDED SIZE: 400 X 600mm; 500 X 700mm; 600 X 900mm FOLDED SIZE: 135 X 200mm; 170 X 250mm; 200 X 300mm SPEED: 120 TO 150 PIECES PER MINUTE FINISHED PRODUCT LENGTH: LENGTH ERROR ≦ 5mm THE POSITION OF THE ABSORBENT LAYER: THE SAME LENGTH AS THE HYDROPHILIC CLOTH AND CAST FILM WATER-ABSORBING LAMINATED PATTERN: DIAMOND PATTERN (CUSTOMIZABLE) NUMBER OF FOLDING LAYERS: 3 LAYERS EACH FOLD WIDTH: 135 TO 200mm APPLICABLE RAW MATERIALS: HYDROPHILIC NON-WOVEN FABRIC ABOUT 20 GSM WATER ABSORPTION LAYER 0.5 TO 3mm CAST FILM ABOUT 25 GSM SSS SPUNBOND WEIGHT: 13 TO 15 GSM THE INNER DIAMETER OF THE RAW MATERIAL CORE: 3 INCHES (75mm) RAW MATERIAL DIAMETER: NON-WOVEN FABRIC ≦ 700mm WATER ABSORPTION LAYER ≦ 1200mm CAST FILM ≦ 400mm MACHINE SIZE (L X W X H) MACHINE: 15000 X 2000 X 1700mm VOLTAGE: 380V/50Hz POWER: 12KW (WITHOUT WOOD PULP SECTION) NET WEIGHT: 6T AIR COMPRESSOR: ≥ 0.6MPA 1.2m³/MINUTE, 15KW (CUSTOMER FURNISHES) NONWOVEN ROLL MAXIMUM DIAMETER: 650mm FILM ROLL DIAMETER: 450mm REQUIRES 2 40 FOOT HQ CONTAINERS Learn More

ABLE TO DO ROLLING TESTS ON MATTRESSES

DURABILITY TEST FOR THE BED SURFACE:
1. USES INDEPENDENT CONTROL SYSTEM. PLC CONTROL SEPARATELY. COOPERATE WITH COLOR TOUCH SCREEN. IT IS
CONVENIENT AND VISUAL TO OPERATE. THE TESTING PROCESS AND THE RUNNING STATUS BE CLEAR TO US, TEST TIMES CAN
BE SET FREELY.
2. SPECIAL LIFT DEVICE IS CONVENIENT TO LIFT UP THE HEAVY ROLLER AND EASY TO MOVE IT TO THE TEST AREA OF THE
MATTRESS. THEN PUT DOWN THE ROLLER AND MAKE ITS OWN WEIGHT FULLY LOAD TO THE SURFACE OF THE MATTRESS.
3.ROLLER CAN MOVE UP AND DOWN IN THE TESTING PROCESS, TO ADAPT TO CONCAVE AND CONVEX SURFACE OF THE
MATTRESS.
4. WHEN DOING DURABILITY TEST OF EDGE, ROLLER CAN BE MOVED TO THE “PARKING” AREA BEHIND THE INSTRUMENT.
5. DURABILITY TEST FOR THE EDGE IS DRIVEN BY SERVO MOTOR; IT IS QUIET, STEADY AND RELIABLE TO OPERATE.
6. INCORPORATES ADVANCED PHOTOELECTRIC SENSE TECHNOLOGY. THE BEGINNING POSITION OF THE CENTER LINE OF THE
CUSHION SURFACE RETURN TO THE HOME POSITION AUTOMATICALLY.
DURABILITY TEST FOR BED EDGE :
ADOPT INDEPENDENT CONTROL SYSTEM, USING DEDICATED HIGH-PRECISION AND HIGH INTELLIGENT ARAM CONTROLLER
AND SPECIAL TEST SOFTWARE. IT CAN RUN UNDER WINDOWS SYSTEM ON PC, IT IS OPERATED ALL BY SOFTWARE, THE
INTERFACE OF SOFTWARE IS EASY TO OPERATE.
SPECIAL TEST SOFTWARE ON PC, WINDOWS OPERATING PAGE, A HIGH DEGREE OF COMPATIBILITY.
TEST PROGRAM HAS ALREADY BEEN SET ON THE SOFTWARE ON PC ACCORDING TO THE TEST REQUIREMENT. A KEY TO TEST.
IT IS CONVENIENT FOR OPERATOR TO LEARN AND SAVE THE TRAINING TIME.
THE CURVE WINDOW OF TEST SOFTWARE DISPLAY THE VALUES OF FORCE AND SHIFT IN REAL TIME, COORDINATE MODEL.
LOADING CUSHION ON THE EDGE AND LOADING CUSHION WHICH IS USED FOR MEASURING USE GENERIC CONNECTION
HEAD THAT CAN BE IN INTERCHANGED. SHARING A SET OF DRIVING DEVICE, SAVE SPACE AND COST.
ADJUSTABLE RACK. THE PRESSURE PLATE CAN BE ADJUSTED THE POSITION ALONG THE DIRECTION OF X AND Y. IT CAN
MEASURE EACH POINT OF THE MATTRESS. IT IS DIFFERENT FROM THE TRADITION WAY TO SEPARATE. THE TEST CAN BE
FINISHED WITHOUT MOVING THE SAMPLE.
SAVE A LOT OF TESTING TIME, GREATLY REDUCES THE WORKING INTENSITY, OPERATORS CAN ACHIEVE SINGLE OPERATION,
SAVE THE COMPANY COST.
FORCE SENSOR AVOIDS DAMAGE TO THE CORE COMPONENTS BECAUSE IT CAN MAKE PROTECTION WHEN IT IS OVERLOAD.

ROLLING TEST SPEED: 16±2CYCLES PER MINUTE (OR SPECIFIED BY CUSTOMER)
CYLINDER ROLLER: 1400N, THE MIDDLE DIAMETER: 300mm, BOTH ENDS DIAMETER: 250mm, LENGTH: 1000
HEXAGON STYLE WOODEN ROLLER: SIZE AS STANDARD REQUIREMENT
COUNTER: 0~999999 CAN BE SET.
THE CONTROL WAY OF ROLLING: TOUCH SCREEN + PLC CONTROL
LOADING CUSHION ON THE EDGE: BUTTOCKS SHAPE, 380mm X 495mm
LOADING PARTS ON THE EDGE: THE MIDPOINT ON THE LONG EDGE OF THE MATTRESS.200 mm FROM EDGE.
LOADING FORCE ON THE EDGE: 1000N
LOADING TIME ON THE EDGE: 3S
POSITION OF MEASUREMENT: MATTRESS CENTER, LEFT AND RIGHT ARE BOTH 250mm, THE MIDPOINT ON THE LONG EDGE
OF THE MATTRESS 200 mm INWARD.
LOADING PLATE OF MEASUREMENT: DIAMETER 355mm, RADIUS OF CURVATURE OF THE END R800mm
CAPACITY OF FORCE SENSOR: 2KN
LOADING SPEED OF MEASUREMENT: 90±5mm/MIN
STROKE: 500mm
DRIVE MOTOR: SERVO MOTOR

Learn More

R-4533 MAMMUT VMK SELECT DOUBLE LOCK CHAINSTITCH MULTI-NEEDLE QUILTER, YEAR 2014
2 BAR , 150m DISTANCE BETWEEN BARS
WIDTH UP TO 2700mm = 106 INCHES

MAMMUT VMK SELECT DOUBLE LOCK CHAINSTITCH MULTI-NEEDLE QUILTER
YEAR: 2014
96 SEPARATELY CONTROLLABLE NEEDLES
FULLY AUTOMATIC NEEDLE PLAN CHANGE
TOP AND BOTTOM THREAD CUTTER AT EACH SEWING POSITION
MATERIAL WIDTH UP TO 2700mm
TWO NEEDLE BARS
150mm SPACING
HANDWHEEL ADJUSTMENT OF HEIGHT OF PRESSER PLATE
ELECTRONIC THREAD BREAK DETECTOR FOR TOP AND BOTTOM THREADS
MATERIAL UNWIND DEVICE
RACKS FOR TOP AND BOTTOM THREAD
ONE CATWALK EACH ON FRONT AND REAR OPERATING SITE
TROUGH INFEED FOR UPPER MATERIAL WITH MOTOR-DRIVEN ROLLER SYSTEM
AUTOMATIC MARKING AND DETECTING UNIT FOR PATTERN CONFORM LATERAL CUT
ELECTRONICS AND MOTORS 400V, 3 PHASES
CONCRETE BASES AND VIBRATION DAMPERS

 

Learn More

REFERENCE NUMBER: J-3756 MERELLO MATTRESS PACKING MACHINE, MODEL ME-104, MAX. MATTRESS 2250 x 2250 x 500mm MAKE: MERELLO MODEL: ME-104 BAG IS MADE OF PLASTIC ROLLS (PE), THICKNESS FROM 50 TO 200 MICROMETERS AUTOMATIC ADJUSTMENT OF THE WIDTH, HEIGHT AND THICKNESS OF THE MATTRESS MATTRESS DIMENSIONS: FROM 1700 x 700 x 100mm TO 2250 x 2250 x 500mm DETECTS THE THICKNESS OF THE MATTRESS AND APPLIES THE PROGRAMMED PRESSURE TO FURTHER TIGTHEN THE BAG PLASTIC CUTS WITH COLD KNIFE: MAINTENANCE-FREE, SMOKE OR ODOR FREE REINFORCEMENT COIL: MOTORIZED ROLLERS FOR PLACING ADDITIONAL PLASTIC ROLLERS TRANSISTORIZED PLC CONTROL AND TOUCH SCREEN THAT REPORTS THE STATUS OF HE MACHINE VARIABLE SPEED DRIVE IN ALL MOTORS TO EXTEND THEIR LIFE THE MACHINE CAN STORE 4 + 4 BOBBINS IN WORKING POSITION Learn More

REFERENCE NUMBER: M-7900

PATTERN TEMPLATE SEWING MACHINE

 

PATTERN TEMPLATE SEWING MACHINE

COMPUTER-CONTROLLED, PROGRAMMABLE

MAXIMUM SPEED: 3,000 STITCHES PER MINUTE

MAXIMUM SEWING SPEED: 10 METERS PER MINUTE

MAXIMUM MOVING SPEED: 80 METERS PER MINUTE

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-6238

GRIBETZ DG-900-6 COMPUTERIZED/LOCKSTITCH MULTI NEEDLE QUILTING MACHINE – 128” WIDTH – YEAR 1988

 

MULTI NEEDLE QUILTING MACHINE

LOCKSTITCH/COMPUTERIZED

MAKE: GRIBETZ

MODEL: DG 900, ULTRA 12

128” WIDTH

YEAR: 1988

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: V-1388

COMPUTERIZED AUTOMATIC MATTRESS BORDER QUILTING, NEW FROM CHINA

 

CONDITION: NEW

VOLTAGE:  SINGLE PHASE, 220V, 50HZ, SINGLE PHASE, 220V, 50HZ

POWER(W):3.98KW

DIMENSION(L X W X H): 5.6 X 1.8 X 1.6M

WEIGHT: 450kg

CERTIFICATION:  CE CERTIFICATE

WARRANTY:  ONE YEAR

AFTER-SALES SERVICE PROVIDED:ENGINEERS AVAILABLE TO SERVICE MACHINERY OVERSEAS

SEWING SPEED:  5M/MIN

THICKNESS OF QUILTING:<1.5cm

MOTOR TYPE:  PARASONIC

CHAIN STITCH HEADS:JUKI

MULTI-NEEDLE SEWING HEAD:52 NEEDLES

SPACE BETWEEN NEEDLES:  3/16,1/4

FABRIC WIDTH:  33cm

AIR PRESSURE:60PSI

1. AUTOMATIC PROGRAMMABLE BORDER WORKSTATION

2. STATE-TO-THE-ART SERVO DRIVES AND ADVANCED MOTION CONTROLLER

3. MULTI-NEEDLE SEWING HEAD WITH 52 NEEDLES 1/4" SPACING, 33cm MAX WIDTH

4. VIRTUALLY UNLIMITED PATTERN DESIGN STORAGE

5. ADJUSTABLE TENSION REWINDER

6. BORDER UP TO 33CM

7. PATTERNS MAY BE SCALED, SHIFTED OR OFFSET ON-THE-FLY

8. DUAL PATTERN STITCHING CHAIN STITCH HEADS(JUKI)

9. BORDER EDGES MAY BE HEMMED, ELIMINATING THE DOUBLE OVERLOCK OPERATION.

 

PACKAGING DETAILS:MACHINE BY WOODEN BOX

DELIVERY TIME:  35 DAYS

Learn More

REFERENCE NUMBER: K-5003 HOTMELT GLUING MATTRESS PRODUCTION LINE 2200mm 500 TO 600 MATTRESSES PER 8-HOUR SHIFT MAX WORKING WIDTH: 2200mm CAPACITY: AVERAGE 500 TO 600 MATTRESSES PER 8 HOUR SHIFT (DEPENDING ON THE OPERATOR PERFORMANCE), ASSUMING ONLY ONE FOAM LAYER IS USED. THE OVERALL SYSTEM IS CONTROLLED WITH ONE MAIN CONTROL PANEL INCLUDES TWO HOTMELT GLUE GUNS FOR THE EDGE: ONE GUN WITH 8 NOZZLES (T-SHAPED) ONE GUN WITH 4 NOZZLES LINE IS FOR BOTH POCKET AND BONNEL SPRINGS. ONE BUTTON PRESS TOGGLES BETWEEN THE TWO; ALL GLUING DIMENSIONS WILL BE SET AUTOMATICALLY WITHOUT ENTERING ANY DIMENSIONS. FLOORSPACE DIMENSIONS: 12400mm X 2400mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-4729 ELECTRONIC QUILTING MACHINE-ONE HEAD ELECTRONICS QUILTING PLACED WITH 1 SEWING HEAD - WORKING AREA: 3200X4800mm QUANTITY AVAILABLE: 1 Learn More