Search results for: 'a-2'

REFERENCE NUMBER: A-2480 ENTRY LEVEL SINGLE NOZZLE ELECTROSPINNING UNIT IT IS POSSIBLE TO APPLY HIGH VOLTAGE WITH PRECISION AS WELL AS ADJUST THE FLOW RATE AND THE DISTANCE BETWEEN THE NEEDLE AND COLLECTOR. THE SPINNING AREA IS NOT ENCLOSED IN A CABINET, BUT THE SMALL SIZE OF THE SYSTEM ALLOWS IT TO FIT INSIDE A FUME HOOD. SPECIFICATIONS: SPINNING-TYPE: SIDE BY SIDE SPINNING CHASSIS: ENCLOSED CHASSIS FOR SPINNING AREA FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: 7000 SERIES ALUMINUM ALLOY, STAINLESS STEEL LED ILLUMINATION TOTAL WEIGHT: APPROX.40 KGS DIMENSIONS: 740 X 645 X 410 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: 0 TO 30 KV VOLTAGE PRECISION: 0.1 KV MAX CURRENT: 0.170 MA HIGH PRECISION MICRO PUMP FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML/H AVAILABLE SYRINGES STANDARD: ALL TYPES ARE AVAILABLE FEEDING AREA NUMBER OF NOZZLES: 1 NOZZLE NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: 0.8 mm COMPATIBLE WITH STANDARD SYRINGE NOZZLES MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 2 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 30 MM - 300 MM DISTANCE ADJUSTMENT: MANUAL CONTROL STATIONARY PLATE COLLECTOR MATERIAL: STAINLESS STEEL DIMENSIONS OF STATIONARY PLATE: 300 X 238.5 mm UNIQUE USER INTERFACE 4.3" TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAFETY FUNCTION EMERGENCY BUTTON OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 HZ @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 1000 X 1000 mm WORKBENCH ABLE TO CARRY MINIMUM 150 KGS. Learn More

REFERENCE NUMBER: A-2478 ADVANCED LEVEL SINGLE NOZZLE ELECTROSPINNING UNIT - STATIONARY PLATE COLLECTOR THIS ELECTROSPINNING UNIT IS A MODEL IN BETWEEN BASIC AND ADVANCED ELECTROSPINNING SYSTEMS. ALL PROCESS PARAMETERS CAN BE ADJUSTED FROM ITS PROGRAMMABLE EASY-TO-USE TOUCH SCREEN PANEL. IT ALSO HAS A SPECIAL DESIGNED ISOLATED CHASSIS AND AN EXHAUST SYSTEM THAT ENABLES WORKING WITH EVAPORATIVE SOLVENTS. THANKS TO THE ADVANCED SAFETY FEATURES, THE DOOR SAFETY SYSTEM AND THE ISOLATED CHASSIS, SCIENTISTS CAN CARRY OUT THEIR EXPERIMENTS IN SAFE CONDITIONS, WITHOUT WORRYING ABOUT ANY RISK OF USERS’ HEALTH ENDANGERMENT. SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATICALLY PAINTED STEEL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: 7000 SERIES ALUMINUM ALLOY, STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX.150 KGS DIMENSIONS: 770 X 675 X 1040 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: 0 TO 40 KV VOLTAGE PRECISION: 0.1 KV MAX CURRENT: 0.125 MA HIGH PRECISION MICRO PUMP FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML/H AVAILABLE SYRINGES STANDARD: ALL TYPES ARE AVAILABLE FEEDING AREA NUMBER OF NOZZLES: 1 NOZZLE NOZZLE INNER DIAMETER: 0.8 mm COMPATIBLE WITH STANDARD SYRINGE NOZZLES MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 2 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 13 TO 213 mm DISTANCE ADJUSTMENT PRECISION: 1 mm STATIONARY PLATE COLLECTOR MATERIAL: STAINLESS STEEL DIMENSIONS OF STATIONARY PLATE: 370 X 130 mm UNIQUE USER INTERFACE 9" TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION FULLY SEALED CABINET TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 HZ @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 1000 X 1000 mm WORKBENCH ABLE TO CARRY MINIMUM 150 KGS. Learn More

REFERENCE NUMBER: A-2477 ADVANCED LEVEL SINGLE NOZZLE ELECTROSPINNING UNIT - DRUM COLLECTOR MACHINE IS A LABORATORY SCALE ELECTROSPINNING UNIT WITH A SINGLE NOZZLE. THE STANDARD MACHINES HAVE A 500 RPM ROTATING DRUM COLLECTOR AND A FLAT COLLECTOR. THERE ARE OPTIONAL ACCESSORIES UPON REQUEST FOR FUNCTIONALITY IMPROVEMENT. OPERATION PARAMETERS LIKE THE NEEDLE-COLLECTOR DISTANCE AND HIGH VOLTAGE VALUE COULD BE AUTOMATICALLY ADJUSTED FROM THE USER PANEL, WITH HIGH PRECISION. THE SYSTEM COMES WITH AN ENCLOSED CABINET MAKING IT POSSIBLE TO ADD TEMPERATURE AND RELATIVE HUMIDITY CONTROL SYSTEMS. SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATICALLY PAINTED STEEL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: 7000 SERIES ALUMINUM ALLOY, STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX.150 KGS DIMENSIONS: 770 X 675 X 1040 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: 0 TO 40 KV VOLTAGE PRECISION: 0.1 KV MAX CURRENT: 0.125 MA HIGH PRECISION MICRO PUMP FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML/H AVAILABLE SYRINGES STANDARD: ALL TYPES ARE AVAILABLE FEEDING AREA NUMBER OF NOZZLES: 1 NOZZLE NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: 0.8 mm COMPATIBLE WITH STANDARD SYRINGE NOZZLES MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 2 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 33.5 TO 233.5 mm DISTANCE ADJUSTMENT PRECISION: 1 mm ROTATING COLLECTOR DRUM COLLECTOR MATERIAL: ALUMINUM DIMENSIONS OF DRUM: 100 X 150 mm FIBER DEPOSITION AREA: 314 X 150 mm DRUM ROTATING SPEED: 100 TO 500 RPM SURFACE SPEED: 52.3 CM/S TO 261.6 CM/S STATIONARY PLATE COLLECTOR MATERIAL: STAINLESS STEEL DIMENSIONS OF STATIONARY PLATE: 370 X 130 mm UNIQUE USER INTERFACE 9" TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION FULLY SEALED CABINET TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 HZ @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 1000 X 1000 mm WORKBENCH ABLE TO CARRY MINIMUM 150 KGS. Learn More

REFERENCE NUMBER: A-2471 INDUSTRIAL ELECTROSPINNING MACHINE A MASS PRODUCTION MACHINE OF ELECTROSPINNING. ALUMINUM FRAME STRUCTURE MAKES IT POSSIBLE FOR EXTENDING DIFFERENT FUNCTIONS. THE SPINNERET USED IS MULTI-NEEDLE ARRAYS, FROM 64 TO 384 NEEDLES ARE EQUIPPED. THE LENGTH AND WIDTH CAN BE MADE ACCORDING TO CUSTOMER'S REQUIREMENT. ROLL TO ROLL COLLECTOR AND CONTINUOUS COLLECTOR CAN BE USED BASED ON THE THICKNESS OF REQUIRED FIBER SHEET. FOR SOLUTIONS, A MULTI-CHANNEL PUMP WILL BE SUPPLIED FOR LONG TIME PRODUCTION OR NONE-STOP PRODUCTION. FEATURES: － EQUIPPED WITH BOTH POSITIVE & NEGATIVE HIGH VOLTAGE SUPPLY DEVICES － EQUIPPED WITH UNWINDING & WINDING MACHINES － CONTINUOUS ELECTROSPINNING & WINDING － ALUMINUM ALLOY FRAME STRUCTURE, MULTI-FUNCTIONS EXPANSIBLE － MULTI-NEEDLES IN ARRAYS. 16 NEEDLES X N ROWS, UP TO 384 NEEDLES － SPINNERET MOVING MACHINERY ENSURES EVEN FIBER SHEET － ONLINE AUTO-CLEAN DEVICE FOR NEEDLES － THICKNESS OF THE FIBER SHEET IS CONTROLLABLE － CE & FCC CERTIFICATE SPINNERET STANDARD：16 NEEDLES X 8 GROUPS =128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ADJUSTED FREELY ACCORDING TO THE REQUIREMENTS OF USE） X-Y-Z MOTION SYSTEM － THE NOZZLE CAN BE MOVED UP AND DOWN IN THE Z DIRECTION THROUGH THE TOUCH SCREEN CONTROL TO DETERMINE THE APPROPRIATE SPINNING DISTANCE. － THE NOZZLE CAN MOVE BACK AND FORTH ALONG THE YAXIS DIRECTION OF THE TANGENT DIRECTION OF THE RECEIVING FILM TO PREPARE A UNIFORM FIBER FILM. － THE NOZZLE AUTOMATIC ONLINE CLEANING DEVICE SCANS ALONG THE X-AXIS DIRECTION. COLLECTOR － STAINLESS STEEL PLATE / MESH SERVES AS A CARRIER FOR THE FIBER MEMBRANE SUBSTRATE. － CONNECTED WITH NEGATIVE HIGH VOLTAGE. － RECEIVER BOARD WIDTH: 500 mm － SPINNING DISTANCE: 80 TO 300 mm ADJUSTABLE WINDER AND UNWINDER － AUTOMATICALLY CALCULATE THE ROLL DIAMETER OF THE LOADED MATERIAL AND CONTROL THE TENSION BETWEEN THE UNWINDING AND SPINNING SECTIONS. － CONSTANT FEEDING SPEED. THE FEEDING SPEED RANGE IS 0 TO 5000 mm / min. － ONLINE HOT PRESSING FUNCTION MODULE. AFTER THE SPINNING IS COMPLETED, BEFORE THE WINDING, A TEMPERATURE-CONTROLLED HOT PRESSING DEVICE (ROOM TEMPERATURE TO 60 ° C) IS USED FOR HOT PRESSING. (OPTIONAL THIRD LAYER MATERIAL STICKING AND REWINDING DEVICE). － CAN BE OPERATED BY TOUCH SCREEN. － DO NOT USE METAL FILM AS THE RECEIVING CARRIER. SYRINGE PUMP － 200ML X 4N CHANNEL － FLOW RATE: 0.1ML / H TO 1280 ML / H － SPECIALLY DESIGNED FOR ELECTRO-SPINNING AND RESISTANT TO HIGH VOLTAGE. HIGH VOLTAGE DEVICE －0 TO 50KV, DIGITAL DISPLAY －-50KV ~ 0 KV, DIGITAL DISPLAY －OUTPUT CURRENT: <1 MA －CONTINUOUSLY ADJUSTABLE CONTROL SYSTEM －PLC CONTROL SYSTEM, 7-INCH TOUCH SCREEN. －CONTROL THE MOVEMENT OF THE NOZZLE. －CONTROL THE NOZZLE TO MOVE UP AND DOWN. －YOU CAN SET THE MOVEMENT TIME, STROKE AND SPEED OF THE NOZZLE. －CONTROL THE FREQUENCY OF NOZZLE CLEANING. －SPINNING PROCESS PARAMETER RECORDS. ENVIRONMENTAL CONTROL SYSTEM －PROVIDE INTERFACE TO LET IN DRY AMBIENT HUMIDITY AIR. －AN EXTERNAL DEHUMIDIFIER CAN BE USED TO CONTROL THE AMBIENT HUMIDITY. THE EXTERNAL DEHUMIDIFIER NEEDS TO BE SELECTED ACCORDING TO THE SIZE OF THE WORKSHOP. THIS EQUIPMENT DOES NOT INCLUDE THIS DEHUMIDIFIER. EXHAUST SYSTEM －BOTTOM UP, AND FOUR FANS ARE PUMPED AT THE SAME TIME. －THE DISCHARGE VOLUME OF A SINGLE UNIT IS 5 TO 150 M3 / H, AND THE RATE IS ADJUSTABLE. THE COMBINED DISCHARGE VOLUME OF THE TWO EXHAUST FANS IS 10 TO 300M3 / H. THE EXTRACTOR IS DRAWN FROM THE MIDDLE. IN THIS WAY, THE HIGH-SPEED AIR VENTILATION MINIMIZES THE RELATIVE DISTURBANCE TO THE SPINNING. THE EXHAUST FAN IS A SILENT EXHAUST FAN. SAFETY －AUTOMATIC POWER-OFF DEVICE FOR OPENING THE DOOR. －RESIDUAL STATIC ELECTRICITY REMOVAL DEVICE. －EMERGENCY STOP SWITCH. －GROUND AT MULTIPLE POINTS. －ALARM DEVICE AFTER THE CONTROL PARAMETERS EXCEED THE LIMIT. CHAMBER －THE CHAMBER IS MADE OF ALUMINUM ALLOY FRAME. －THE FRONT AND SIDE WINDOWS OF THE CABINET ARE MADE OF TEMPERED GLASS. －MULTI-POINT TEMPERATURE AND HUMIDITY COLLECTION AND DISPLAY. －THE PROCESS CAN BE OBSERVED WITH THE NAKED EYE. －AIR INLET: HOT AND DRY AIR CAN BE INTRODUCED TO QUICKLY ADJUST THE HUMIDITY INSIDE THE CHAMBER. POWER SOURCE －220 VOLTS AND 50/60 Hz －TOTAL POWER: 10KW NUMBER OF NEEDLES: 128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ARBITRARILY REDUCED ACCORDING TO THE SOLVENT USAGE) FLOW RATE OF EACH NEEDLE: (~ 3ML ± 50%) / HOUR TOTAL FLOW OF THE WHOLE MACHINE: ABOUT (400ML ± 50%) / HOUR SOLUTION CONCENTRATION: 10 TO 20% 8 HOURS SOLUTION PROCESSING CAPACITY: ABOUT (3L ± 50%) / 8 HOURS SOLID CONTENT (WEIGHT OF FIBER PRODUCED): (300G ± 50%) / 8 HOURS ACCORDING TO THE APPROXIMATE PRODUCTION OF FIBER MATERIAL WITH A GRAM WEIGHT OF 2GSM. WINDING AND UNWINDING SPEED: 50M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 25 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 200 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: 600 SQUARE METERS BASED ON THE PRODUCTION OF FIBER MATERIAL WITH A GRAMMAGE OF 0.02G / ㎡, APPROXIMATELY: WINDING AND UNWINDING SPEED: 5000M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 2500 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 20,000 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: ABOUT 60,000 SQUARE METERS Learn More

V-1449 RIETER E65 COMBERS WITH RIETER E32 LAP FORMER, YEAR 2006

(4) X RIETER E65 COMBING MACHINES
MAKE: RIETER
MODEL: E65
YEAR: 2006
QUANTITY: 4
NO.OF DELIVERIES: SINGLE
NO OF DOUBLING: 8
MATERIAL PROCESSED: COTTON
TROLLEYS AVAILABLE: 8
UNICOMB MAKE: GRAF
TOP COMB MAKE: GRAF
EXHAUST/WASTE SUCTION: UPWARDS
SPOOL DIAMETER: 200 mm SPOOL WIDTH: 300 mm
UNICOMB TYPE: PRIMA COMB 8015
TOP COMB TYPE: 2026
DIAMETER AND HEIGHT OF CAN: 24" X 47"
SPARE SPOOLS: 50 SPOOLS AND 6 TROLLEYS
THEY DO NOT HAVE INDIVIDUAL HEAD MONITORING
THEY HAVE ON LIGHT BARRIER TO MONITOR 8 HEADS
QUANTITY: 4

(1) X RIETER E32 LAP FORMER MACHINE
MAKE: RIETER
MODEL: E32
YEAR: 2006
NUMBER OF TROLLEYS: 16
NUMBER OF DOUBLINGS SLF: 32
QUANTITY: 1

Learn More

V-1332 TOYODA RX240 RING FRAME WITH AUTODOFFER LINKED TO AUTOWINDER, YEAR 1998

RING FRAME
WITH AUTODOFFER LINKED TO AUTOWINDER
MAKE: TOYODA
MODEL: RX240
YEAR: 1998
NO OF SPDL / MC: 960
SPINDLE GAUGE mm: 75
BOBBIN LENGTH mm: 230mm ( 8” LIFT )
BOTTOM ROLL DIA IN mm: 27/27/27
RING DIA mm: 42mm X 5 SETS, 50mm X 3 SETS
SPINDLE WHARVE mm: 20.2 mm
SPINDLE DRIVE: 4 SPINDLE DRIVE
NO OF CREEL ROWS: 6
OHTC: AVAILABLE
INVERTER: AVAILABLE
DOFFING: AUTOMATIC LINK
LINKED TO: WINDER
DRAFTING MAKE: SKF
LINKED TO SPECIFICATION: AUTOWINDER
WINDER MAKE: MURATA
WINDER MODEL: 7-V-SS
TYPE OF FEED: LINK
NO. OF DRUMS: 28
DRUM TYPE: BAKELITE
DRUM TURNS: 2.0
TRAVERSE: 6"
SPLICER: G2
WAXING: AVAILABLE
CONICITY: 5’ 57”
MMM: AVAILABLE
EMPTY TUBE CONVEYOR: AVAILABLE
RING TUBE INNER DIA: MIN: 22/16mm MAX 26/23mm
SUCTION: CENTRAL
OHTC MAKE: PNEUMABLO
OTHER SPECIFY: KESOKKI SU24 CLEARER

QUANTITY: 8 SETS

Learn More

S-1167 SEALING AND SHRINKING MACHINE, WIDTH 850mm

SEALING AND SHRINKING MACHINE
SHRINKING CANS, BEERS, PURE WATER ETC
SHRUNK BY PE FILM, PVC, POF ETC.
CONVEYING BELT CAN BE MADE OF ROLLERS
OR TEFLON MESH BELT
OR S/S MESH BELT
STAINLESS STEEL HEATER
LARGE POWER FAN SYSTEM
AND SUPER COOLING SYSTEM TO ENSURE
THE EXCELLENT SHRINKING
ITEM 001
MAX PACKING SIZE (MM): L500 X W300 X H350
MIN PACKING SIZE (MM): 280 X 100 X 100
PACKING SPEED: 6 TO 10PCS/MINUTE
VOLTAGE: 220V/50HZ
RATED POWER: 1.8KW
SEALING TIME/SHRINK TIME/TEMPERATURE: 0.5-1.5S/0-0.6S/0 -250 °C
WIDTH/THICKNESS OF THE FILM: 600mm/0.04 -0.12mm
DIMENSION: L1030 X W850 X H970mm
GROSS WEIGHT: 350 KGS
AIR PRESSURE OF WORKING: 4 TO 8MPA
SHRINK FILM: PE POF PVC

QUANTITY: 1

ITEM 002
MAX PACKING SIZE (MM): W600*H400*L
PACKING SPEED: 15M/MIN
VOLTAGE: 380V/50HZ
RATED POWER: 20KW
DIMENSION: L3200 × W850 × H1580mm
GROSS WEIGHT: 380 KGS
SHRINK FILM: PE POF PVC

QUANTITY: 1

Learn More

C-5162 TRUTZSCHLER DRAWING FRAMES, YEAR 2009

TRUTZSCHLER DRAWING FRAMES
YEAR: 2009
2 MACHINES WITH AUTO REGULATION
2 MACHINES WITHOUT AUTO REGULATION

QUANTITY: 4

Learn More

R-1695 TRUTZSCHLER DK903 IDF CARDING, YEAR 2002

ITEM 001
TRUTZSCHLER DK903 IDF CARDING
MAKE: TRUTZSCHLER
MODEL: DK903 IDF
YEAR: 2002
INTEGRATED DRAW FRAMES: AVAILABLE
CCD: AVAILABLE
CFD: AVAILABLE
CHUTE FEED TYPE: DFK
CAN HEIGHT: 45”
WASTE COLLECTION: CONTINUOUS
EXHAUST / WASTE SUCTION: UPWARDS
NO OF LICKER IN: 3
FLAT TYPE: ALUMINUM
ST FLAT FRONT: 2
ST FLAT BACK: 3
MATERIAL PROCESS: COTTON

QUANTITY: 12

ITEM 002
TRUTZSCHLER DK903 IDF CARDING
MAKE: TRUTZSCHLER
MODEL: DK903 IDF
YEAR: 2002
INTEGRATED DRAWFRAME: AVAILABLE
CCD: AVAILABLE
CFD: AVAILABLE
CHUTE FEED TYPE: DFK
CAN HEIGHT: 45”
WASTE COLLECTION: CONTINUOUS
EXHAUST / WASTE SUCTION: UPWARDS
LICKER IN: 3
FLAT TYPE: ALUMINUM
ST FLAT FRONT: 3
ST FLAT BACK: 5
MATERIAL PROCESS: SYNTHETIC

QUANTITY: 4

Learn More

REFERENCE NUMBER: M-3150

COMPLETE OPEN END PLANT WITH 1200 ROTORS YEAR 1990-2005

 

COMPLETE OPEN END PLANT WITH 1.200 ROTORS

YEAR FROM 1990 TO 2005

 

1 LINE WORKED  100% PURE COTTON

1 LINE WORKED  100% COTTON WASTE 

PRODUCTION CAPACITY  MAX 10.000 KGS PER DAY

NE COUNTS: FROM NE 5 TO NE 30

380 VOLTS 50 HZ

 
BLOWROOM

01 TRUETZSCHLER BLENDOMAT BDT-019/2.300 , YEAR 1993, W.W. 2.300 MM
01 RIETER MONOCYLINDER B4/1, YEAR 1990

01 RIETER FEEDER B3/3R, YEAR 1990

01 RIETER UNIMIX B7/3, YEAR 1990

01 TRUETZSCHLER CAGE CONDENSER BRC01,YEAR 2005

01 TRUETZSCHLER MXU6- MULTI MIXER, YEAR 2005
01 TRUETZSCHLER MXU6- MULTI MIXER INCORPORATE WHIT CLC1, YEAR 2005

01 TRUETZSCHLER SCFO SECUROMAT FOREIGN FIBRE DETECTOR, YEAR 2005

01 TRUETZSCHLER FEEDER BOU3, YEAR 2005
01 TRUETZSCHLER CVT3 CLEANER, YEAR 1999

02  TRUETZSCHLER DX DUSTEX, YEAR 1993 AND 2005
01 JOSSI VISION SHELD, YEAR 2007

CARDS

10  TRUTZSCHLER DK 803 CARDS, YEAR  1999

TRUTZSCHLER CHUTE FEED
ALLUMINIUM FLATH
CANS DIA 1000MM X 1190MM
AUTOMATIC  CAN CHANGERS

DRAWFRAMES

02 RIETER SB 51 DRAWFRAMES, YEAR 1990
CAN DIA 600MM X 1200MM
AUTOMATIC CAN CHANGER

 

01 RIETER RSB 51 DRAWFRAMES,  YEAR 1990
CAN DIA 600MM X 1200MM
AUTOMATIC CAN CHANGER

 
01 RIETER RSB D30 DRAWFRAMES , YEAR 2001
CAN DIA 450MM X 1070MM
WITH AUTO LEVELLING AND AUTOMATIC CAN CHANGERS

 

01 RIETER RSB D35 DRAWFRAMES , YEAR 2005
CAN DIA 450MM X 1070MM
WITH AUTO LEVELLING AND AUTOMATIC CAN CHANGERS

02  VOUK  SH802 , YEAR 1994 AND 1995
CAN DIA 450MM X 1070MM
WITH AUTO LEVELLING AND AUTOMATIC CAN CHANGERS

 

OPEN END
03 SCHLAFHORST AUTOCORO OPEN END SPINNING FRAME , 2 X YEAR 2000 , 1 X YEAR 2001
TYPE ACO 288 WITH SE 11 SPINBOX , SRZ  6”
240 ROTORS , ROTOR 33/36/40 ,OPENING ROLLER TYPE B174 OR OB20
WAXING, WITH  CLEARERS COROLAB MODEL V.3.6. 2 X AUTOMATIC YARN PIECER ASW

02 SCHLAFHORST AUTOCORO OPEN END SPINNING FRAME , YEAR 1995
TYPE ACO 288 WITH SE 9 SPINBOX , SRZ  6”
240 ROTORS , ROTOR 33,OPENING ROLLER TYPE B174 OR OB20
WAXING, CLEARERS COROLAB FOREING FIBER MODEL V.3.6.U1.39 ,  2 X AUTOMATIC YARN PIECER ASW

INCLUDED IN THE PLANT

CENTRAL SUCTION
CANS

02 HORIZONTAL PRESS  RIETER A5/1, YEAR 1990 ,WHIT FASER COMPACTOR  

SPARE PARTS

CATALOGS

Learn More