Search results for: 'Belt'

S-1160 TWISTED ROPE MAKING MACHINE, ROPE RANGE 12 TO 20mm

TWISTED ROPE MACHINE
MODEL: TM-M55
HIGH PRODUCTIVITY
LOW NOISE LEVEL
LOW MAINTENANCE
EASY OPERATION SYSTEM
RIGID CONSTRUCTION
POWER TRANSMISSION BY TIMING BELTS
AUTO STOP AFTER YARN BREAKAGE TO CONTROL WASTAGE
DIGITAL LENGTH COUNTER METER
DOOR SENSOR
A/C DRIVE
DIRECT COILING HEAD WINDING
ROPE RANGE: 12 TO 20mm
LAY RANGE: 32 TO 78mm
POWER: 11KW
TAKE-UP CAPACITY: Φ130XΦ660XΦ400mm
OUTPUT KG/24H: 12/14
18/1600
1840/3000
SIZE OF PAY OFF BOBBIN: 175X430mm (8”)
QTY OF 8” BOBBIN: 32X4 OR 32X3
MACHINE SIZE: 9000 X 2200 X 2300mm

QUANTITY: 1

Learn More

S-1159 TWISTED ROPE MAKING MACHINE, ROPE RANGE 20 TO 26mm

TWISTED ROPE MAKING MACHINE
MODEL: TM-M66
HIGH PRODUCTIVITY
LOW NOISE LEVEL
LOW MAINTENANCE
EASY OPERATION SYSTEM
RIGID CONSTRUCTION
POWER TRANSMISSION BY TIMING BELTS
AUTO STOP AFTER YARN BREAKAGE TO CONTROL WASTAGE
DIGITAL LENGTH COUNTER METER
DOOR SENSOR
A/C DRIVE
DIRECT COILING HEAD WINDING
ROPE RANGE: 20 TO 26mm
LAY RANGE: 40 TO 105mm
POWER: 18.5KW
TAKE-UP CAPACITY: Φ140XΦ700XΦ450mm
OUTPUT KG/24H: 18/22
24/3000
3700/4000
SIZE OF PAY OFF BOBBIN: 175X430mm (8”)
QTY OF 8” BOBBIN: 20X4 OR 20X3
MACHINE SIZE: 12000 X 2300 X 2200mm

QUANTITY: 1

Learn More

S-1158 TWISTED ROPE MAKING MACHINE, ROPE RANGE 22 TO 32mm

TWISTED ROPE MAKING MACHINE
MODEL: TM-M77
HIGH PRODUCTIVITY
LOW NOISE LEVEL
LOW MAINTENANCE
EASY OPERATION SYSTEM
RIGID CONSTRUCTION
POWER TRANSMISSION BY TIMING BELTS
AUTO STOP AFTER YARN BREAKAGE TO CONTROL WASTAGE
DIGITAL LENGTH COUNTER METER
DOOR SENSOR
A/C DRIVE
DIRECT COILING HEAD WINDING
ROPE RANGE: 22 TO 32mm
LAY RANGE: 83 TO 121mm
POWER: 20KW
TAKE-UP CAPACITY: Φ200XΦ550XΦ650mm
OUTPUT KG/24H: 28/30
32/6000
7000/8000
SIZE OF PAY OFF BOBBIN: 175X430mm (8”)
QTY OF 8” BOBBIN: 64X3 OR 64X4
MACHINE SIZE: 16000 X 2500 X 2400mm

QUANTITY: 1

Learn More

S-1157 TWISTED ROPE MAKING MACHINE, ROPE RANGE 4 TO 10mm

TWISTED ROPE MAKING MACHINE
MODEL: TM-M33
HIGH PRODUCTIVITY
LOW NOISE LEVEL
LOW MAINTENANCE
EASY OPERATION SYSTEM
RIGID CONSTRUCTION
POWER TRANSMISSION BY TIMING BELTS
AUTO STOP AFTER YARN BREAKAGE TO CONTROL WASTAGE
DIGITAL LENGTH COUNTER METER
DOOR SENSOR
A/C DRIVE
DIRECT COILING HEAD WINDING
ROPE RANGE: 4 TO 10mm
LAY RANGE: 15 TO 38mm
POWER: 5.5KW
TAKE-UP CAPACITY: Φ130XΦ500XΦ320mm
OUTPUT KG/24H: 4/6
10/100
300/500
SIZE OF PAY OFF BOBBIN: 175X430mm (8”)
QTY OF 8” BOBBIN: 10X4 OR 10X3
MACHINE SIZE: 6000 X 1700 X 1850mm

QUANTITY: 1

Learn More

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-3350

RIETER K45 RING SPINNING FRAMES LINKED WITH MURATA 21C WINDERS- YEAR 2008 TO 2009

 

RIETER COMPACT RING SPINNING FRAMES MOD. K45

YEAR: 2008/09

NUMBER OF SPINDLES: 1632

SPINDLE GAUGE: 70mm

RING TUBE LENGTH: 200mm

SPINDLE WHARVE DIAMETER: 18mm

DRAFTING SYSTEM: RIETER

RING DIAMETER: 40mm

OHTC: CHINESE

CREEL: NR. 6 ROWS

MAIN MOTOR: 80KW

SUCTION MOTOR: 15KW

SUCTION: INDIVIDUAL

WASTE COLLECTION: MANUAL

DOFFER: AUTO DOFFER LINKED

BOTTOM ROLLER: 27mm

QUANTITY: 6

 

LINKED TO:

MURATA CONE WINDERS MOD. 21C

YEAR : 2008

NUMBER OF DRUMS: 34

YARN CLEARER: USTER QUANTUM 2 WITH FOREIGN FIBER SENSOR

MEASURING HEAD: MK C15 F23

MACHINE HAND: 3 X LH, 3 X RH

SPLICER: G 2Z

WAXING: AVAILABLE

SUCTION: INDIVIDUAL

OHTC: AVAILABLE

PACKAGE CONVEYER BELT: AVAILABLE

DOFFER: AUTO

QUANTITY: 6

Learn More

REFERENCE NUMBER: C-3615
MURATA 21C, 60 DRUMS, YEAR 2012 AND 2013

MURATA
MODEL: 21C
1 X YEAR: 2013
2 X YEAR: 2012

QUANTITY: 3

Learn More

REFERENCE NUMBER: K-8437 THIBEAU CARD CA5 2 DOFFERS WIDTH 2500mm YEAR 1984 MAKE: THIBEAU TYPE: CA5 MACHINE: CARDING 2 DOFFERS EQUIVALENT TO CA6 PP WIDTH: 2500mm YEAR: 1984 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5278 (1313BASBXX12) L SAVIO ESPERO CONE TO CONE WINDER YEAR 1998 – WITH 56 POSITIONS SAVIO CONE TO CONE WINDER ESPERO RL DX MAIN UNIT 56 HEADS FEEDING BY CONE WITH AUTOMATIC CONE CHANGER WITH MESDAN WATER SPLICER MODEL 4923 WITH ELECTRONIC LOEPFE YARN MASTER CLEARERS TK830N PITCH 6” (152 mm) CONICITY 4°20’ QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5209 (131395LD12U) L MURATA 7-2 MACH CONER LINK WINDERS YEAR 1989 EACH 50 SPINDLES MURATA MODEL 7-2 MACH CONER LINK WINDERS EACH 50 SPINDLES WITH USTER MODEL MKC15-A2 CLEARERS CONE DELIVERY G-1 SPLICERS WAXING AUTODOFF CONTINUOUS BOBBIN FEED AUTOMATIC CONE LOADERS PNEUMABLE BLOWER BELT DISCHARGE QUANTITY AVAILABLE: 30 Learn More