Search results for: 'max'

REFERENCE NUMBER: A-2474 SEMI INDUSTRIAL SCALE MULTI NOZZLE ELECTROSPINNING UNIT - 18 NOZZLES MACHINE IS A COMPACT CONTINUOUS NANOFIBER PRODUCTION MACHINE. ITS MAJOR ADVANTAGE IS SCALABILITY, AS IT’S SUITABLE FOR BOTH PRODUCTION LINE AS WELL AS R&D PROJECTS. IT FUNCTIONS WITH 18 NOZZLES ENABLING HIGH PRODUCTIVITY FOR MASS PRODUCTION OF NANOFIBERS, HOWEVER IT CAN ALSO FUNCTION WITH SINGLE NOZZLE THEREFORE ENABLES WORKING ON SMALL-SCALE R&D PROJECTS. ITS UNIQUE DESIGN ENABLES PRODUCTION OF NANOFIBERS AND COMPOSITES, IT ACCOMMODATES TWO SYRINGE PUMPS AND TWO HIGH VOLTAGE POWER SUPPLIERS, MAKING IT POSSIBLE TO WORK SIMULTANEOUSLY WITH UP TO TWO DIFFERENT POLYMERS, INDEPENDENTLY CONTROLLABLE SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATIC PAINTED SHEET METAL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX. 350 KGS DIMENSIONS: 1585 X 1550 X 1950 mm HIGH VOLTAGE POWER SUPPLY NUMBER OF HV GENERATORS: 2 UNITS (1 FOR EACH SOLUTION FEEDING ROD) VOLTAGE RANGE: 0 TO 40 KV VOLTAGE PRECISION: 0.1 KV MAX CURRENT: 0.125 MA HIGH PRECISION MICRO PUMP NUMBER OF PUMPS: 2 UNITS FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML AVAILABLE SYRINGES: ALL TYPES ARE AVAILABLE FEEDING AREA NUMBER OF NOZZLES ON EACH FEEDING PIPE SET: 9 PCS NUMBER OF FEEDING PIPE SETS: 2 PCS NUMBER OF NOZZLES: 18 PCS SINGLE NOZZLE PRODUCTION: AVAILABLE FEEDING PIPE MATERIAL: ALUMINUM NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: 0.8 mm MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 2 ML MINIMUM REQUIRED SOLUTION FOR EACH FEEDING PIPE SET: 8 ML MINIMUM REQUIRED SOLUTION FOR FULL LOADING: 18 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 30 TO 280 mm DISTANCE ADJUSTMENT PRECISION: 1 mm COLLECTOR ROLL TO ROLL COLLECTOR FIBER DEPOSITION WIDTH: 300 mm SUBSTRATE WINDING SPEED: 0,01 M/MIN TO 1 M/min REPETITIVE WINDING MODE (OPTIONAL) COATING HOMOGENEITY SYSTEM: X-AXIS REPETITIVE MOTION STROKE OF COATING HOMOGENEITY SYSTEM: 10 MM TO 80 mm SPEED OF COATING HOMOGENEITY SYSTEM: 2 TO 20 mm/SEC UNIQUE USER INTERFACE 9" TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 HZ @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 2000 X 2000 mm Learn More

REFERENCE NUMBER: A-2473 SEMI INDUSTRIAL SCALE MULTI NOZZLE ELECTROSPINNING UNIT THE MAJOR ADVANTAGE OF THIS MACHINE IS SCALABILITY, AS IT’S SUITABLE FOR BOTH PRODUCTION LINE AS WELL AS R & D PROJECTS. IT FUNCTIONS WITH 56 NOZZLES ENABLING HIGH PRODUCTIVITY FOR MASS PRODUCTION OF NANOFIBERS, HOWEVER IT CAN ALSO FUNCTION WITH A SINGLE WHEN WORKING ON R & D PROJECTS. ITS UNIQUE DESIGN ENABLES PRODUCTION OF NANOFIBERS AND COMPOSITES, IT ACCOMMODATES FOUR SYRINGE PUMPS AND FOUR HIGH VOLTAGE POWER SUPPLIERS, MAKING IT POSSIBLE TO WORK SIMULTANEOUSLY WITH UP TO FOUR DIFFERENT POLYMERS, INDEPENDENTLY CONTROLLED. MACHINE USES A UNIQUE PATENTED HYBRID ELECTROSPINNING TECHNOLOGY. THIS NEW TECHNIQUE COMBINES THE ADVANTAGES OF BOTH NEEDLE - BASED AND NEEDLE - LESS ELECTROSPINNING, WHICH ARE INCLUDING BUT NOT LIMITED TO: HIGH THROUGHOUT PRODUCTIVITY (FROM THE NEEDLE - LESS), WITH A VERY ACCURATE CONTROL OVER THE PROCESS AND THE FINAL PRODUCT (FROM NEEDLE - BASED ELECTROSPINNING). SPECIFICATIONS: CHASSIS: ELECTROSTATIC PAINTED SHEET METAL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX. 650 KGS DIMENSIONS: 1965 X 2095 X 2012 mm HIGH VOLTAGE POWER SUPPLY NUMBER OF HV GENERATORS: 4 UNITS (1 FOR EACH SOLUTION FEEDING ROD) VOLTAGE RANGE: 0 TO 40 KV VOLTAGE PRECISION: 0.1 KV MAX CURRENT: 0.125 MA HIGH PRECISION MICRO PUMP NUMBER OF PUMPS: 4 UNITS FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML AVAILABLE SYRINGES: ALL TYPES ARE AVAILABLE FEEDING AREA NUMBER OF NOZZLES ON EACH FEEDING PIPE SET: 14 PCS NUMBER OF FEEDING PIPE SETS: 4 PCS NUMBER OF NOZZLES: 56 PCS SINGLE NOZZLE PRODUCTION: AVAILABLE FEEDING PIPE MATERIAL: ALUMINUM NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: 0.8 mm MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 3 ML MINIMUM REQUIRED SOLUTION FOR EACH FEEDING PIPE SET: 15 ML MINIMUM REQUIRED SOLUTION FOR FULL LOADING: 50 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 30 TO 280 mm DISTANCE ADJUSTMENT PRECISION: 1 mm COLLECTOR ROLL TO ROLL COLLECTOR FIBER DEPOSITION WIDTH: 550 mm SUBSTRATE WINDING SPEED: 0,01 M/MIN TO 1 M/min REPETITIVE WINDING MODE (OPTIONAL) COATING HOMOGENEITY SYSTEM: X-AXIS REPETITIVE MOTION STROKE OF COATING HOMOGENEITY SYSTEM: 10 MM TO 80 mm SPEED OF COATING HOMOGENEITY SYSTEM: 2 TO 20 mm/SEC UNIQUE USER INTERFACE 12" TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 HZ @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 3000 X 3000 mm Learn More

REFERENCE NUMBER: A-2472 INDUSTRIAL SCALE MULTI NOZZLE ELECTROSPINNING UNIT MACHINE HAS A HIGH PRODUCTION CAPACITY. IT ALSO ENABLES EASY MONITORING AND MANAGEMENT OF ALL PARAMETERS THAT ARE EFFECTIVE IN THE PRODUCTION OF NANOFIBERS. FOR THE COMMERCIAL PRODUCTION, REPEATABLE PRODUCTION OF MATERIALS IN UNIFORM AND SPECIFIC STANDARDS HAS THE HIGHEST IMPORTANCE. MACHINE IS EQUIPPED WITH 132 ELECTROSPINNING NEEDLES AND A HOMOGENIZATION SYSTEM, ALLOWING THE SURFACE TO BE UNIFORMLY AND CONTINUOUSLY AT A WIDTH OF 1 METER. BECAUSE OF ITS ADVANCED AUTOMATION SYSTEM AND THE AIR CONDITIONING EQUIPMENT, IT ENABLES CONTINUOUS PRODUCTION AT THE HIGHEST SET QUALITY EVEN UNDER CHANGING ENVIRONMENTAL CONDITIONS. SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATIC PAINTED SHEET METAL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX. 600 KGS DIMENSIONS: 3650 x 1950 X 1940 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: IN THE SPINNERET 0-(+)60 KV VOLTAGE PRECISION: 0.1 KV MAXIMUM CURRENT: 3 MA PUMP SYSTEM FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML CONTINUES FEEDING PUMP SYSTEM FEEDING AREA NUMBER OF NOZZLES ON EACH FEEDING PIPE SET: 33 PCS NUMBER OF FEEDING PIPE SETS: 4 PCS NUMBER OF NOZZLES: 132 PCS SINGLE NOZZLE PRODUCTION: AVAILABLE FEEDING PIPE MATERIAL: ALUMINUM NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: STANDARD NOZZLE: 0.8 mm (DIFFERENT DIAMETERS CAN BE USED) MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 3 ML MINIMUM REQUIRED SOLUTION FOR EACH FEEDING PIPE SET: 25 ML MINIMUM REQUIRED SOLUTION FOR FULL LOADING: 150 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 50 mm TO 350 mm DISTANCE ADJUSTMENT PRECISION: 1 mm COLLECTOR ROLL TO ROLL COLLECTOR FIBER DEPOSITION WIDTH: 1000 mm SUBSTRATE WINDING SPEED: MAX. 0,1 M/ min TO MIN. 10 M/ min COATING HOMOGENEITY SYSTEM: X-AXIS STROKE OF COATING HOMOGENEITY SYSTEM: 30 mm TO 80 mm SPEED OF COATING HOMOGENEITY SYSTEM: 2 TO 20 mm/SEC UNIQUE USER INTERFACE 12” TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 Hz @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 5000 X 3000 mm Learn More

P-5030 MARZOLI RST 1 RING FRAMES YEAR 2002 TO 2003 23,136 SPINDLES

MARZOLI
MODEL: RST 1
RING FRAMES
YEAR: 2002 TO 2003
GUAEG, SPINDLES & TUBE LENGTH:
2 MAXHINES x 75 GUAGE, 1200 SPINDLES, TUBE 250mm
2 MAXHINES x 70 GUAGE, 1296 SPINDLES, TUBE 230mm
10 MACHINES x 70 GUAGE, 12996 SPINDLES, TUBE 210mm
4 MACHINES x 70 GUAGE, 1296 SPINDLES, TUBE 180mm
DOFFING: AUTOMATIC
DRAFTING: SKF 2025
TOP CLEARER ROLLER: YES
WHARVE DIAMETER: 24mm
NUMBER OF CREEL ROWS: 6
OVER HEAD BLOWER: SOHLER
EXHAUST: DOWN
VOLTAGE: 380/50
RUNNING ON MILL FLOOR

QUANTITY: 18

Learn More

REFERENCE NUMBER: M-2043 (77034YHEWA6RX) RING SPINNING PLANT YEAR 2000-2002 -17,000 SPINDLES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: R-7584

CORGHI DOUBLING WINDER, YEAR 2008 MODEL BE TRAVERSE 6 TO 8 INCHES

 

QUANTITY: 1

Learn More

V-1332 TOYODA RX240 RING FRAME WITH AUTODOFFER LINKED TO AUTOWINDER, YEAR 1998

RING FRAME
WITH AUTODOFFER LINKED TO AUTOWINDER
MAKE: TOYODA
MODEL: RX240
YEAR: 1998
NO OF SPDL / MC: 960
SPINDLE GAUGE mm: 75
BOBBIN LENGTH mm: 230mm ( 8” LIFT )
BOTTOM ROLL DIA IN mm: 27/27/27
RING DIA mm: 42mm X 5 SETS, 50mm X 3 SETS
SPINDLE WHARVE mm: 20.2 mm
SPINDLE DRIVE: 4 SPINDLE DRIVE
NO OF CREEL ROWS: 6
OHTC: AVAILABLE
INVERTER: AVAILABLE
DOFFING: AUTOMATIC LINK
LINKED TO: WINDER
DRAFTING MAKE: SKF
LINKED TO SPECIFICATION: AUTOWINDER
WINDER MAKE: MURATA
WINDER MODEL: 7-V-SS
TYPE OF FEED: LINK
NO. OF DRUMS: 28
DRUM TYPE: BAKELITE
DRUM TURNS: 2.0
TRAVERSE: 6"
SPLICER: G2
WAXING: AVAILABLE
CONICITY: 5’ 57”
MMM: AVAILABLE
EMPTY TUBE CONVEYOR: AVAILABLE
RING TUBE INNER DIA: MIN: 22/16mm MAX 26/23mm
SUCTION: CENTRAL
OHTC MAKE: PNEUMABLO
OTHER SPECIFY: KESOKKI SU24 CLEARER

QUANTITY: 8 SETS

Learn More

P-2212 RIETER OE R 20 SPINNING MACHINE YEAR 2002

RIETER
TYPE: OE R 20
SPINNING MACHINE
YEAR: 2002
300 ROTORS
CYLINDRICAL PACKAGE 170mm HEIGHT x 320 mm DIAMETER
PACKAGE WEIGHT MAXIMUM 3.0 KILOGRAMS
ROTOR DIAMETER 28 OR 30 mm
OB 20 (UNIVERSAL)
COMBERS SPEED: 7000 to 9000 RPM
ROTORS SPEED: 90 to 10,000 RPM
MANUFACTURED YARNS: VISCOSE, VISCOSE/PES – TEX 20, 25, 30
WAXING DEVICE
AUTOMATIC DOFFING (2 PER MACHINE)
BLOWER
USTER QUANTUM
3 X 380 VOLTS, 50 HERTZ, 6 BARS
STILL IN OPERATION

QUANTITY: 1

Learn More

C-3729 RIETER OE R 20 WITH 300 ROTORS, YEAR 2002

RIETER
MODEL: OE R 20
YEAR: 2002
300 ROTORS
CYLINDRICAL PACKAGE: 170mm HEIGHT X 320mm DIAMETER
PACKAGE WEIGHT MAXIMUM: 3.0 KGS
ROTOR DIAMETER: 28 OR 30mm
OB 20 (UNIVERSAL)
COMBERS SPEED: 7000 TO 9000 RPM
ROTORS SPEED: 90 TO 100 000 RPM
MANUFACTURED YARNS: VISCOSE
VISCOSE/PES - TEX 20, 25, 30
WAXING DEVICE
AUTOMATIC DOFFING (2 PER MACHINE)
BLOWER
USTER QUANTUM
3 X 380V
50 HZ
6 BARS

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5546 (440YNTBHH3) L FABRIC DYEING MACHINERY (1) X STAND FOR FABRIC ROLLS 3X 17 MT (6) X DYEING CANS (1) X LINCOLN ELECTRIC WELDING EQUIPMENT (16) X FIRE EXTINGUISHING EQUIPMENT 10, 20 Y 30 LIBRAS (1) X ALARM (1) X HYDRANT WITH 2 HOSES (1) X WHEELED 10 STAGES STRUCTURE (3) X 5 MT3 STORAGE TANKS AND PENLIKE PUMP TO EXTRACT FROM DRILLED HOLE (1) X BOILER J. C. T. 100 BHP CONVERTED TO GAS AND ACPM (1) X SCALE IDEMA (1) X ELECTRONIC SCALE MIERTIER (1) X CENTRIFUGE FOR 100 KG (1) X COMPRESSOR SFM AT 7 HP (1) X COMPRESSOR AT 3 HP (1) X M. C. S. SOFT FLOW 400 KG MODEL 1993 (2) X BATCH DYEING FOR 80 Y 100 KG (2) X FABRIC INSPECTION DEVICE INSTALLATION AND MONTAGE OF GAS AND ELECTRICITY SYSTEMS (1) X BRUCKNER STENTER WITH WEFT STRAIGHTENING SYSTEM MAHLO AND FOULARD MAX GOLLER OF 3 CHAMBERS WITH 6 BURNERS OF 600,000 BTU EACH (1) X NON STOP MACHINE FOR FABRIC MODEL 2008 SERIES 0148-5 ALL MACHINES ARE RUNNING AT THE MOMENT TOTAL QUANTITY AVAILABLE: 43 Learn More