Search results for: 'speed'

REFERENCE NUMBER: A-2472 INDUSTRIAL SCALE MULTI NOZZLE ELECTROSPINNING UNIT MACHINE HAS A HIGH PRODUCTION CAPACITY. IT ALSO ENABLES EASY MONITORING AND MANAGEMENT OF ALL PARAMETERS THAT ARE EFFECTIVE IN THE PRODUCTION OF NANOFIBERS. FOR THE COMMERCIAL PRODUCTION, REPEATABLE PRODUCTION OF MATERIALS IN UNIFORM AND SPECIFIC STANDARDS HAS THE HIGHEST IMPORTANCE. MACHINE IS EQUIPPED WITH 132 ELECTROSPINNING NEEDLES AND A HOMOGENIZATION SYSTEM, ALLOWING THE SURFACE TO BE UNIFORMLY AND CONTINUOUSLY AT A WIDTH OF 1 METER. BECAUSE OF ITS ADVANCED AUTOMATION SYSTEM AND THE AIR CONDITIONING EQUIPMENT, IT ENABLES CONTINUOUS PRODUCTION AT THE HIGHEST SET QUALITY EVEN UNDER CHANGING ENVIRONMENTAL CONDITIONS. SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATIC PAINTED SHEET METAL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX. 600 KGS DIMENSIONS: 3650 x 1950 X 1940 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: IN THE SPINNERET 0-(+)60 KV VOLTAGE PRECISION: 0.1 KV MAXIMUM CURRENT: 3 MA PUMP SYSTEM FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML CONTINUES FEEDING PUMP SYSTEM FEEDING AREA NUMBER OF NOZZLES ON EACH FEEDING PIPE SET: 33 PCS NUMBER OF FEEDING PIPE SETS: 4 PCS NUMBER OF NOZZLES: 132 PCS SINGLE NOZZLE PRODUCTION: AVAILABLE FEEDING PIPE MATERIAL: ALUMINUM NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: STANDARD NOZZLE: 0.8 mm (DIFFERENT DIAMETERS CAN BE USED) MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 3 ML MINIMUM REQUIRED SOLUTION FOR EACH FEEDING PIPE SET: 25 ML MINIMUM REQUIRED SOLUTION FOR FULL LOADING: 150 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 50 mm TO 350 mm DISTANCE ADJUSTMENT PRECISION: 1 mm COLLECTOR ROLL TO ROLL COLLECTOR FIBER DEPOSITION WIDTH: 1000 mm SUBSTRATE WINDING SPEED: MAX. 0,1 M/ min TO MIN. 10 M/ min COATING HOMOGENEITY SYSTEM: X-AXIS STROKE OF COATING HOMOGENEITY SYSTEM: 30 mm TO 80 mm SPEED OF COATING HOMOGENEITY SYSTEM: 2 TO 20 mm/SEC UNIQUE USER INTERFACE 12” TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 Hz @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 5000 X 3000 mm Learn More

REFERENCE NUMBER: A-2471 INDUSTRIAL ELECTROSPINNING MACHINE A MASS PRODUCTION MACHINE OF ELECTROSPINNING. ALUMINUM FRAME STRUCTURE MAKES IT POSSIBLE FOR EXTENDING DIFFERENT FUNCTIONS. THE SPINNERET USED IS MULTI-NEEDLE ARRAYS, FROM 64 TO 384 NEEDLES ARE EQUIPPED. THE LENGTH AND WIDTH CAN BE MADE ACCORDING TO CUSTOMER'S REQUIREMENT. ROLL TO ROLL COLLECTOR AND CONTINUOUS COLLECTOR CAN BE USED BASED ON THE THICKNESS OF REQUIRED FIBER SHEET. FOR SOLUTIONS, A MULTI-CHANNEL PUMP WILL BE SUPPLIED FOR LONG TIME PRODUCTION OR NONE-STOP PRODUCTION. FEATURES: － EQUIPPED WITH BOTH POSITIVE & NEGATIVE HIGH VOLTAGE SUPPLY DEVICES － EQUIPPED WITH UNWINDING & WINDING MACHINES － CONTINUOUS ELECTROSPINNING & WINDING － ALUMINUM ALLOY FRAME STRUCTURE, MULTI-FUNCTIONS EXPANSIBLE － MULTI-NEEDLES IN ARRAYS. 16 NEEDLES X N ROWS, UP TO 384 NEEDLES － SPINNERET MOVING MACHINERY ENSURES EVEN FIBER SHEET － ONLINE AUTO-CLEAN DEVICE FOR NEEDLES － THICKNESS OF THE FIBER SHEET IS CONTROLLABLE － CE & FCC CERTIFICATE SPINNERET STANDARD：16 NEEDLES X 8 GROUPS =128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ADJUSTED FREELY ACCORDING TO THE REQUIREMENTS OF USE） X-Y-Z MOTION SYSTEM － THE NOZZLE CAN BE MOVED UP AND DOWN IN THE Z DIRECTION THROUGH THE TOUCH SCREEN CONTROL TO DETERMINE THE APPROPRIATE SPINNING DISTANCE. － THE NOZZLE CAN MOVE BACK AND FORTH ALONG THE YAXIS DIRECTION OF THE TANGENT DIRECTION OF THE RECEIVING FILM TO PREPARE A UNIFORM FIBER FILM. － THE NOZZLE AUTOMATIC ONLINE CLEANING DEVICE SCANS ALONG THE X-AXIS DIRECTION. COLLECTOR － STAINLESS STEEL PLATE / MESH SERVES AS A CARRIER FOR THE FIBER MEMBRANE SUBSTRATE. － CONNECTED WITH NEGATIVE HIGH VOLTAGE. － RECEIVER BOARD WIDTH: 500 mm － SPINNING DISTANCE: 80 TO 300 mm ADJUSTABLE WINDER AND UNWINDER － AUTOMATICALLY CALCULATE THE ROLL DIAMETER OF THE LOADED MATERIAL AND CONTROL THE TENSION BETWEEN THE UNWINDING AND SPINNING SECTIONS. － CONSTANT FEEDING SPEED. THE FEEDING SPEED RANGE IS 0 TO 5000 mm / min. － ONLINE HOT PRESSING FUNCTION MODULE. AFTER THE SPINNING IS COMPLETED, BEFORE THE WINDING, A TEMPERATURE-CONTROLLED HOT PRESSING DEVICE (ROOM TEMPERATURE TO 60 ° C) IS USED FOR HOT PRESSING. (OPTIONAL THIRD LAYER MATERIAL STICKING AND REWINDING DEVICE). － CAN BE OPERATED BY TOUCH SCREEN. － DO NOT USE METAL FILM AS THE RECEIVING CARRIER. SYRINGE PUMP － 200ML X 4N CHANNEL － FLOW RATE: 0.1ML / H TO 1280 ML / H － SPECIALLY DESIGNED FOR ELECTRO-SPINNING AND RESISTANT TO HIGH VOLTAGE. HIGH VOLTAGE DEVICE －0 TO 50KV, DIGITAL DISPLAY －-50KV ~ 0 KV, DIGITAL DISPLAY －OUTPUT CURRENT: <1 MA －CONTINUOUSLY ADJUSTABLE CONTROL SYSTEM －PLC CONTROL SYSTEM, 7-INCH TOUCH SCREEN. －CONTROL THE MOVEMENT OF THE NOZZLE. －CONTROL THE NOZZLE TO MOVE UP AND DOWN. －YOU CAN SET THE MOVEMENT TIME, STROKE AND SPEED OF THE NOZZLE. －CONTROL THE FREQUENCY OF NOZZLE CLEANING. －SPINNING PROCESS PARAMETER RECORDS. ENVIRONMENTAL CONTROL SYSTEM －PROVIDE INTERFACE TO LET IN DRY AMBIENT HUMIDITY AIR. －AN EXTERNAL DEHUMIDIFIER CAN BE USED TO CONTROL THE AMBIENT HUMIDITY. THE EXTERNAL DEHUMIDIFIER NEEDS TO BE SELECTED ACCORDING TO THE SIZE OF THE WORKSHOP. THIS EQUIPMENT DOES NOT INCLUDE THIS DEHUMIDIFIER. EXHAUST SYSTEM －BOTTOM UP, AND FOUR FANS ARE PUMPED AT THE SAME TIME. －THE DISCHARGE VOLUME OF A SINGLE UNIT IS 5 TO 150 M3 / H, AND THE RATE IS ADJUSTABLE. THE COMBINED DISCHARGE VOLUME OF THE TWO EXHAUST FANS IS 10 TO 300M3 / H. THE EXTRACTOR IS DRAWN FROM THE MIDDLE. IN THIS WAY, THE HIGH-SPEED AIR VENTILATION MINIMIZES THE RELATIVE DISTURBANCE TO THE SPINNING. THE EXHAUST FAN IS A SILENT EXHAUST FAN. SAFETY －AUTOMATIC POWER-OFF DEVICE FOR OPENING THE DOOR. －RESIDUAL STATIC ELECTRICITY REMOVAL DEVICE. －EMERGENCY STOP SWITCH. －GROUND AT MULTIPLE POINTS. －ALARM DEVICE AFTER THE CONTROL PARAMETERS EXCEED THE LIMIT. CHAMBER －THE CHAMBER IS MADE OF ALUMINUM ALLOY FRAME. －THE FRONT AND SIDE WINDOWS OF THE CABINET ARE MADE OF TEMPERED GLASS. －MULTI-POINT TEMPERATURE AND HUMIDITY COLLECTION AND DISPLAY. －THE PROCESS CAN BE OBSERVED WITH THE NAKED EYE. －AIR INLET: HOT AND DRY AIR CAN BE INTRODUCED TO QUICKLY ADJUST THE HUMIDITY INSIDE THE CHAMBER. POWER SOURCE －220 VOLTS AND 50/60 Hz －TOTAL POWER: 10KW NUMBER OF NEEDLES: 128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ARBITRARILY REDUCED ACCORDING TO THE SOLVENT USAGE) FLOW RATE OF EACH NEEDLE: (~ 3ML ± 50%) / HOUR TOTAL FLOW OF THE WHOLE MACHINE: ABOUT (400ML ± 50%) / HOUR SOLUTION CONCENTRATION: 10 TO 20% 8 HOURS SOLUTION PROCESSING CAPACITY: ABOUT (3L ± 50%) / 8 HOURS SOLID CONTENT (WEIGHT OF FIBER PRODUCED): (300G ± 50%) / 8 HOURS ACCORDING TO THE APPROXIMATE PRODUCTION OF FIBER MATERIAL WITH A GRAM WEIGHT OF 2GSM. WINDING AND UNWINDING SPEED: 50M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 25 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 200 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: 600 SQUARE METERS BASED ON THE PRODUCTION OF FIBER MATERIAL WITH A GRAMMAGE OF 0.02G / ㎡, APPROXIMATELY: WINDING AND UNWINDING SPEED: 5000M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 2500 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 20,000 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: ABOUT 60,000 SQUARE METERS Learn More

P-2212 RIETER OE R 20 SPINNING MACHINE YEAR 2002

RIETER
TYPE: OE R 20
SPINNING MACHINE
YEAR: 2002
300 ROTORS
CYLINDRICAL PACKAGE 170mm HEIGHT x 320 mm DIAMETER
PACKAGE WEIGHT MAXIMUM 3.0 KILOGRAMS
ROTOR DIAMETER 28 OR 30 mm
OB 20 (UNIVERSAL)
COMBERS SPEED: 7000 to 9000 RPM
ROTORS SPEED: 90 to 10,000 RPM
MANUFACTURED YARNS: VISCOSE, VISCOSE/PES – TEX 20, 25, 30
WAXING DEVICE
AUTOMATIC DOFFING (2 PER MACHINE)
BLOWER
USTER QUANTUM
3 X 380 VOLTS, 50 HERTZ, 6 BARS
STILL IN OPERATION

QUANTITY: 1

Learn More

C-3729 RIETER OE R 20 WITH 300 ROTORS, YEAR 2002

RIETER
MODEL: OE R 20
YEAR: 2002
300 ROTORS
CYLINDRICAL PACKAGE: 170mm HEIGHT X 320mm DIAMETER
PACKAGE WEIGHT MAXIMUM: 3.0 KGS
ROTOR DIAMETER: 28 OR 30mm
OB 20 (UNIVERSAL)
COMBERS SPEED: 7000 TO 9000 RPM
ROTORS SPEED: 90 TO 100 000 RPM
MANUFACTURED YARNS: VISCOSE
VISCOSE/PES - TEX 20, 25, 30
WAXING DEVICE
AUTOMATIC DOFFING (2 PER MACHINE)
BLOWER
USTER QUANTUM
3 X 380V
50 HZ
6 BARS

QUANTITY: 1

Learn More

S-1167 SEALING AND SHRINKING MACHINE, WIDTH 850mm

SEALING AND SHRINKING MACHINE
SHRINKING CANS, BEERS, PURE WATER ETC
SHRUNK BY PE FILM, PVC, POF ETC.
CONVEYING BELT CAN BE MADE OF ROLLERS
OR TEFLON MESH BELT
OR S/S MESH BELT
STAINLESS STEEL HEATER
LARGE POWER FAN SYSTEM
AND SUPER COOLING SYSTEM TO ENSURE
THE EXCELLENT SHRINKING
ITEM 001
MAX PACKING SIZE (MM): L500 X W300 X H350
MIN PACKING SIZE (MM): 280 X 100 X 100
PACKING SPEED: 6 TO 10PCS/MINUTE
VOLTAGE: 220V/50HZ
RATED POWER: 1.8KW
SEALING TIME/SHRINK TIME/TEMPERATURE: 0.5-1.5S/0-0.6S/0 -250 °C
WIDTH/THICKNESS OF THE FILM: 600mm/0.04 -0.12mm
DIMENSION: L1030 X W850 X H970mm
GROSS WEIGHT: 350 KGS
AIR PRESSURE OF WORKING: 4 TO 8MPA
SHRINK FILM: PE POF PVC

QUANTITY: 1

ITEM 002
MAX PACKING SIZE (MM): W600*H400*L
PACKING SPEED: 15M/MIN
VOLTAGE: 380V/50HZ
RATED POWER: 20KW
DIMENSION: L3200 × W850 × H1580mm
GROSS WEIGHT: 380 KGS
SHRINK FILM: PE POF PVC

QUANTITY: 1

Learn More

REFERENCE NUMBER: S-1165
TWISTED ROPE MAKING MACHINE, STRAND 5mm TO 15mm, ROPE RANGE 10mm TO 30mm

ITEM 001
STRAND MAKING MACHINE
MODEL: TM-D1030
SPECIFICATION OF THE STRAND: 5mm TO 15mm
ROTATION SPEED OF THE CRADLE: 416R/MIN
DIRECTION OF TWISTING: “S” OR “Z”
MOTOR POWER: 3KW
MACHINE DIMENSION: 2400 X 500 X 650mm
MACHINE WEIGHT: 600 KGS

QUANTITY: 1

ITEM 002
ROPE MAKING MACHINE
MODEL: TM-D1030
ROPE RANGE: 10mm TO 30mm
ROTATION SPEED OF THE CRADLE: 66R/MIN
DIRECTION OF TWISTING: “S” OR “Z”
MOTOR POWER: 5.5KW
MACHINE DIMENSION: 6500 X 1700 X 1700mm
MACHINE WEIGHT: 2800 KGS

QUANTITY: 1

Learn More

S-1164 TWISTED ROPE MAKING MACHINES, STRAND 12mm TO 30mm, ROPE RANGE 24mm TO 60mm

ITEM 001
STRAND MAKING MACHINE
MODEL: TM-D2460
SPECIFICATION OF THE STRAND: 12mm TO 30mm
ROTATION SPEED OF THE CRADLE: 416R/MIN
DIRECTION OF TWISTING: “S” OR “Z”
MOTOR POWER: 5.5KW
MACHINE DIMENSION: 4000 X 850 X 1750mm
MACHINE WEIGHT: 1000 KGS

QUANTITY: 1

ITEM 002
ROPE MAKING MACHINE
MODEL: TM-D2460
ROPE RANGE: 24mm TO 60mm
ROTATION SPEED OF THE CRADLE: 55R/MIN
DIRECTION OF TWISTING: “S” OR “Z”
MOTOR POWER: 11KW
MACHINE DIMENSION: 6500 X 1750 X 1750mm
MACHINE WEIGHT: 4000 KGS

QUANTITY: 1

Learn More

S-1163 TWISTED ROPE MAKING MACHINES, STRAND 2.5mm TO 5mm, ROPE RANGE 5mm TO 10mm

ITEM 001
STRAND MAKING MACHINE
MODEL: TM-D510
SPECIFICATION OF THE STRAND: 2.5mm TO 5mm
ROTATION SPEED OF THE CRADLE: 416R/MIN
DIRECTION OF TWISTING: “S” OR “Z”
MOTOR POWER: 1.5KW
MACHINE DIMENSION: 2400 X 500 X 650mm
MACHINE WEIGHT: 600 KGS

QUANTITY: 1

ITEM 002
ROPE MAKING MACHINE
MODEL: TM-D510
ROPE RANGE: 5mm TO 10mm
ROTATION SPEED OF THE CRADLE: 416R/MIN
DIRECTION OF TWISTING: “S” OR “Z”
MOTOR POWER: 3KW
MACHINE DIMENSION: 4000 X 800 X 1000mm
MACHINE WEIGHT: 1700 KGS

QUANTITY: 1

Learn More

REFERENCE NUMBER: X-1034 VOLKMANN 2x1 TWISTER VTS07/5.10, YEAR 1995 WITH 120 POSITIONS 120 SPINDLES POWER 8” (LONG TUBE 225mm) DIAMETER COILS UP TO 180mm EXIT CONES 6” (COURSES 152 mm) CONICITY 5 o 57’ THREADED TIRE THREAD BACKUP DECIVE IN THE SPINNING ON THE CONE STOP LIFT THE ARM-HOLDER ROPTURA WIRE INVERTER SPEED REGULATION MOVING TANGENCIAL SPINDLES FOR BAND SPEED ZONE OF 6000 TO 9500 RPM 16 METERS PER MINUTE OF A 30, 77A TWISTE FOR METRO 1331 TWISTS IN SIZE QUANTITY AVAILABLE: 3 Learn More

REFERENCE NUMBER: C-1212 RIETER ELITEX OE BT 905, YEAR 1999 TO 2000, WITH CYLINDRICAL PACKAGE & WAXING , 288 ROTORS DETAILS: RIETER ELITEX OE BT 905 YEAR 1999 TO 2000 288 ROTORS QUANTITY AVAILABLE: 2 Learn More